Best solution to get the pound sign displayed US7ASCII DB in Reports11g

Similar Questions

• Windows 10 question - can't get the desktop to display

  Hello.

  I have recently upgraded to windows 10 and since restarting (repeatedly) cannot get the desktop to display. boot screen, login screen and screen saver, everything works perfectly.

  Can someone tell me what I can do for my screen working again?

  Thanks in advance.

  Start in safe mode and disable the lock screen.

• Qosmio G20 - could not get the video to display on the LCD screen

  I have a laptop Toshiba Qosmio G20, running Windows XP MCE.

  The DVD player on board isn't sounds very well so I thought I would plug an external DVD drive to expand its use. After a lot of internet research, I finally found how to do this. Here's my setup.

  Using the monitor port I used the adapter 3 RCA jacks. (There is no S-video on the DVD drive and an adapter did not work). I finally discovered that in order to get the image on the screen, I have to use Fn + 4. Now, here's where I'm having the problem. I can't get the video to display on my external LCD. FN + 5 didn't do. The monitor is an I - inc AH191D and is connected by VGA cable. There is no driver other than the one for the VISTA operating system... That is why it is not anywhere in the Device Manager.
  Here are the settings I use in order to have all that shows on my desk, shows on the monitor.

  In Control Panel open to the screen. Properties
  Number chosen 1 - multiple monitors GeForce Go6600 video card...
  Advanced under
  the GeForce G06600 tab,
  nViewDisplay Mode: clone 1 a 1 b
  The main screen: digital flat screen
  Secondary display: AH191

  I also tried using the properties of controls on Toshiba. He says under TV output TV output but gives options of the program, but I don't know what I would use. Any ideas out there?

  Wait I'm confused, if you try to send the output of your external DVD drive in the laptop, and then display the image on an external monitor attached to laptop?

  If you use the DVD player on your laptop, it will be good quality S-video as a signal of low resolution.

  Is there something wrong with the DVD player?

  If it's just the DVD software you don't like, you can download other DVD players. PowerDVD is excellent, its better than WinDVD and other players in my opinion.

• How to get the icons to display correctly in the Finder?

  At the time of the "classic" Mac OS, if the icons are not correctly display in the Finder, we could 'rebuild the desktop file' to correct the problem. I've recently updated to Yosemite, and most things work well, but for some reason, most of the files in the Finder .webloc now show as blank icons (but not all; a few show the correct icon). There is no model, I can see: some very old .webloc files now show a white icon (where I know that their icons used to be correct), while the most recent show the icon of correct - although I just created four (by dragging the URL of the Safari, the usual method) which are all empty. Sometimes they appear with the older icon, with the symbol @ (although those who seem to have changed vacuum after running and restart maintenance). I tried from an external disk, repair permissions and repair the file system, as well as cleaning with the utility of Maintenance (which clears the web browser and other caches), nothing works. Does anyone know how to get the computer to display these icons correctly?

  May be a corrupt .plist.

  Make a backup, preferably 2 backups on 2 separate drives.

  Go to Finder and select your user folder. With this Finder window as the windshield, select Finder/display/display options for presenting or order - J.  When the display options opens, check "show the library folder. This should make your visible user library folder in your user folder.  Select the library. Then go to Preferences/com.apple.finder.plist and com.apple.desktop.plist.  Move the .plists on your desktop.

  Relaunch the Finder by restarting the computer and test. If it works fine, delete the plists from the desktop.

  If the same, return the .plists to where you obtained since, by crushing the latest.

  Thanks to leonie for certain information contained in this.

• How to get the icon to display for a Midlet app?

  
  

  Does anyone know how can I fix? It's all over on my application with the exception of the icon. It is ready for release, but the icon does not appear. I tried for a week now get the icon to display.

• I have been using Photoshop CS5 for some time for photos products (jewelry). What are my best options to get the last Photoshop.

  I have been using Photoshop CS5 for some time for photos products (jewelry). What are my best options to get the last Photoshop.

  Hi michaelb.

  You can subscribe to Plan photography for $9.99 a month, which will give the latest version of Photoshop CC 2015, CC 2015 Lightroom and Adobe Bridge.

  Lightroom and Photoshop | Plan of cloud of Adobe's creative photography

  Kind regards

  Mohit

• In order to get best Solutions to move the code from Dev to Test: 11.1.1.3

  In order to get best Solutions to move development code to the Test Server: Studio Edition Version 11.1.1.3.0
  
  Development: Hostname: dev; Web logic server: WLSDev; Database: DBDev
  
  Test: Hostname: test; Web logic server: WLSTest; Database: DBTest
  
  Now, how to code the Test environment development environment? Once the code is derived from development, test team may not touch.

  You cannot create 2 datasources with the same JNDI name (I assume you meant JNDI and not JLDN) in the same field of WLS - you have to use separate domains.

  John

• Share the invocation and the pound sign

  Hello

  Qml I am sharing a message that contains a pound sign "£", but this charcacter is corrupted:

  {Of invocation
  ID: share
  query: {InvokeQuery}
  mimetype: "text/plain".
  ID: idQuery
  invokeActionId: "bb.action.SHARE".
  }
  onArmed: {}
  If (idQuery.data! = "") {}
  Trigger ("BB.action.Share");
  }
  }
  }

  The one you have ideas? I tried to use a mime like this type: "text/plain; charset = utf-8', but without success.

  I managed to find an answer to my question which is perhaps not the best way to do it, but it works for me. It allows also extended characters will be displayed on such as "USA" to share.

  I expose a function in C++:

  Static QByteArray Q_INVOKABLE fromUnicodeToLocale(const QString &str);)

  QByteArray Utils::fromUnicodeToLocale (const QString & str) {}
  QTextCodec::codecForLocale()-> fromUnicode (str) return;
  }

  Then in qml:

  {Of invocation
  ID: share
  query {}
  mimetype: "text/plain".

  data : _utils.fromUnicodeToLocale ("My Cafe: the £1.60")
  ID: idQuery
  invokeActionId: "bb.action.SHARE".
  }
  onArmed: {}
  If (share.query.data! = "") {}
  Trigger ("BB.action.Share");
  }
  }
  }

• Best way to get the content of the 1 page in a lot?

  Hi everyone - I just wanted to check with experts on the best way to get information from 1 html page.  For example, I have a page that shows every 1 '' Ribbons that we have in stock to be used on sandals, belts, bags, etc. dog collars;  (http://elizab.com/eb-1-inchribbons.html) I can do an iframe to pull this html page 1 to all others?  What is the best way to do it?

  Basically I just have to update only one page html (tapes 1 ") and then it is good on all other pages, instead of having me to go through and to update every page that uses ribbons 1" :-)

  I'm not sure what is always taken in charge and what is not recommended on this!

  Thank you-

  Use an SSI. Server Side includes. It's better than an iframe. Google for server-side includes.

  Usually, I use php for inclusions on server side, but your server must support php. If not, you can use .shtml server-side includes.

  You need only to update and download only one file when you want to make changes. So on what page/s you have included the SSI these pages updated as well.

  Although I am a little confused because your field of design takes a page in its entirety. How do you intend to include all of the information on other pages without doubt that contain other information as well?

  I guess that if you only have a small area in which to display all the different designs on your pages, then an iframe is probably the best solution for your because you can define its dimensions.

  Personally I would get really "upset" if I have to keep scrolling left and right and top and bottom, then maybe if you go the route iframe you can arrange at least all the vertical stripes so we don't have to scroll up and down or break designs down into smaller categories to its more manageable for the end user.

• iOS 10 - How do I get the clock to display the seconds?

  Recently updated my iPhone iOS 10.0.1 6s.

  After a power failure, I was re-creation of different clocks and discovered that the "Clock" Apple app displays more seconds in the "WorldClock" pane In addition, I can't change for the clock faces 'analog-style' in this application. The application icon has a small second hand in the home screen, but it's pretty hard to use when you try to put clocks in the second. Any thoughts?

  As far as I know, the clock of the world cannot do that, which is a pity. I wonder why they decided to remove it. Perhaps he used too much energy to the battery?

  Thank you for pointing out that the application icon displays the seconds hand, I never noticed that before.

  It is discussed by the Parliament, but the only solution which they suggest is to get an application:

  in the new iso standard 10 analog world clock update?

• How to get the image to display on the Blackberry screen URL

  Hi all

  I'm setting up a Blackberry java application. I have a url to the image... (as you can tell "http://www.christianfilmdatabase.com/wp-content/uploads/2013/06/Movies.jpg"). I get this image dynamically and display on my screen. ... How can I do it... I post my code here...

  Bitmap bitmap = Bitmap.getBitmapResource(imageUrl);
  
                      Background background = BackgroundFactory.createBitmapBackground(bitmap);
  

  Best regards,

  Thank you very much, Peter... Now, I could get the web images and display them on the screen...

• Impossible to get the icons to display in the form 11g

  We have recently updated to form 11g and I am unable to get our forms to display custom icons. I tried a variety of techniques of research on the web, but none of them have worked. Can someone give me some ideas here?
  
  Thank you
  Adam

  Adam;

  Thanks for all the details. I'll gather my notes and change this ASAP, I think I have a bit more clues.

  Best regards

  mseberg

  My setup is a different path, but I used this formsweb.cfg:

  formsweb.cfg

  Location: servers/WLS_FORMS/stage/formsapp/11.1.1/formsapp/config.

  or

  /U01/app/Oracle/product/FMW/user_projects/domains/FormsReports/servers/WLS_FORMS/tmp/_WL_user/formsapp_11.1.1/wb1h9e/config/formsweb.cfg

  My repertoire of forms is:

  / u01/app/oracle/product/FMW/oracle_pfrd/Forms

  I use E10240-01 as my guide. Section 4.7 deployment fonts, icons and Images used by Forms Services, it shows using EM to map icon and fonts. I still have to test.

  Published by: mseberg on February 23, 2011 09:49

• How can I get the string value displayed on a digital control defined for the relative time.

  I have a digital potentiometer to display relative time in increments of 30 minutes.

  I want to record the value displayed on the control string.  Unfortunately, when I use the "convert to decimal string.vi" number, the resulting string is just the value in seconds.

  How can I get the value as a string? (for example 01:30 for an hour and thirty minutes)

  Thank you

  Sean

  Hi Sean.C!

  M_Peeker's suggestion is a good thing.  A stage that could clarify things is that you must set the % t <%H:%M> format string entry.

  < br / > Kristen:.

• How can I get the keyboard to display in the simulator of Dev Alpha?

  Hello

  I use the Dev Alpha Simulator to test my apps of Cascades, and I need to type text in the fields in my application. I can just click and type the keyboard of my Mac, but capitalization does not work. So, how can I get the BlackBerry keyboard to display on the simulator - so that it looks like a real device?

  Thank you.

  Hello
  You can click on the lower right corner, and the keyboard will be visible.

  Kind regards

  Sommily

• BlackBerry Smartphones best way to get the best picture, the phone is off?

  I think it's true that when we send a jpeg image which was obtained using the camera of the phone it is compressed... to a certain extent.

  What is the best way to dload an image uncompressed computer desktop or such so that we can get the higher resolution image?

  Hey copperbeech,.

  You can also use the mass storage Mode to browse your BlackBerry Media Card of your computer to find the image and copy it to a folder on your PC.

  Thank you