Best way to get the content of the 1 page in a lot?

Similar Questions

• What is the best way to get the minimum or maximum of a table of numbers value?

  Let's say I have a table of numbers: [2,3,3,4,2,2,5,6,7,2]
  
  What is the best way to find the minimum or maximum value in the table?
  
  Now, just get the maximum, I'm a loop in the table and reset a variable to the value if it is greater than the existing value:
  

  What I ended up doing was sorting table (descending to MAX) upward for MIN and then grabbing the first element of the array. Works like a charm in very few lines of code.

  Thank you.

• BlackBerry Smartphones best way to get the best picture, the phone is off?

  I think it's true that when we send a jpeg image which was obtained using the camera of the phone it is compressed... to a certain extent.

  What is the best way to dload an image uncompressed computer desktop or such so that we can get the higher resolution image?

  Hey copperbeech,.

  You can also use the mass storage Mode to browse your BlackBerry Media Card of your computer to find the image and copy it to a folder on your PC.

  Thank you

• Best way to get the EBITDA, calculated or hierarchy?

  I have a client who has a hierarchy of multi-level natural account that includes the core accounts and leads all the way to its Net income. However, they would like an account called EBITDA to be able to reference using smartview rules.
  
  What do you recommend is the best way to do this? I was looking for to use the natural hierarchy counts, but all their groups the way they want them already, I need to be able to have some sort of alternative account hierarchy (similar to a hierarchy of entities replacement), but I don't know if this is possible.
  
  I could use an account calculated, but it would be nice to be able to get the EBE without having to run a consolidation every time a change for companies of basic number, but it might be the easiest way to do it.
  
  All advice is appreciated!

  Yes, quite possible to have a flow of the basic account upwards in any number of parents. You only download the account once. You would be reconsolidate as many times as necessary.

  Hierarchy1
     - Acct_A
     - Acct_B
  
  Hierarchy 2
     - Acct_A
     - Acct_C
  

  You load Acct_A once and consolidate the hierarchy 1 and 2 to get the totals you want. If you want to slightly reduce the manual steps, you could give the two hierarchies shared parent so you can kick off a consolidation at the top.

  Hierarchy3
     -Hierarchy1
        - Acct_A
        - Acct_B
     -Hierarchy 2
        - Acct_A
        - Acct_C
  

• The search for the best way to get the data

  Sorry for my bad English.
  
  * 1. Definition * the task
  I have the table "tab01":
  
  ID; EVENT_DATE; Item1; Item2... itemN
  ______________________________
  1; 01.01.2009; A; null; ... null
  2; 02.01.2009; B; 1; ... null
  3; 03.01.2009; null; 2; ... 3
  4; 04.01.2009; null; null; ... 4
  
  I need to get the last non-null column values (item1... itemN) on the date chosen (result line).
  For example, the result on 03.01.2009 will be:
  
  EVENT_DATE; Item1; Item2... itemN
  ______________________________
  03.01.2009; B; 2 ... 3
  
  * 2.  My decision *.
  My decision (it works, but I think that's not good) was:
  1. create the package with
  (a) methods to get and set the date,
  (b) the functions which are the values required;
  2. create the view based on the functions of the package.
  
  create or replace package is P_STATE
  -The public variable declarations
  Trunc (sysdate) default date StateDate;
  
  -Declarations of function and public procedure
  procedure SetStateDate (date date);
  function GetStateDate return date;
  
  function GetItem1 return tab01.item1%type;
  ...
  function GetItemN return tab01.itemN%type;
  
  end P_STATE;
  
  create or replace package body is P_STATE
  
  procedure SetStateDate (date date) is
  Start
  StateDate: = Al;
  end;
  
  function GetStateDate return date is
  Start
  Return StateDate;
  end;
  
  function tab01.item1%type return GetItem1 is
  Result tab01.item1%type;
  cursor c1 is select item1 tab01
  where item1 is not null and
  EVENT_DATE < = StateDate
  event_date desc order.
  Start
  Open c1;
  Fetch c1 into result.
  Close c1;
  Return (result);
  end;
  
  ...
  
  function GetItemN return tab01.itemN%type is
  ...
  end P_STATE;
  
  create or replace view v_tab01
  (date_on, item1,... itemN)
  in select
  p_state. GetStateDate,
  p_state. GetItem1,
  ...
  p_state. GetItemN
  Double;
  
  Can you help me to find the best way?

  You might if it were a feature in pipeline. Check it out here: [http://www.akadia.com/services/ora_pipe_functions.html]

• Best way to get the time zone

  I'm looking for the current time zone of the user. In my view, there is a function that seems to be able to do as part of the Pim calendar. I have to ask permission to do seems like overkill when I just want to get the current time zone is not currently using the calendar functions.

  http://developer.BlackBerry.com/native/reference/Cascades/bb__pim__calendar__calendarsettings.html#f...

  Is there a better way to do it?

  This can be quite difficult because there isn't anyway that I am aware of ask BB10 directly for the offset of UTC (GMT). The basic procedure is:

  • Get the current time with QDateTime::currentDateTime()
  • Make a copy with QDateTime::toUTC()
  • Force the date in UTC format.
  • The difference between the two dates and times now corresponds to the offset from UTC.

  Something like this:

  QDateTime dt1 = QDateTime::currentDateTime();
  QDateTime dt2 = dt1.toUTC();
  dt1.setTimeSpec(Qt::UTC);
  
  int offset = dt2.secsTo(dt1);
  

  After that it works offset will contain the offset from UTC in seconds, so divide by 3600 if you want hours.

  UPDATE: For everyone it is the future that has understanding of the difficulties of reading what the hell happens in this code...

  • Line, you get just the date and time in a QDateTime. This will be the time in the local time zone. It doesn't have to be updated to do this, any date and time will be, but current is convenient.
  • Line two is a copy of the first date and time, but as one hour UTC. If, for example, if you are in Toronto to UTC - 5:00 and the current local time is 15:46, then T2D will be set at 20:46, the time in Greenwich, England, but the dates are in fact always the same, because we're local, and the other is UTC. For this reason, at this point by subtracting from each other will result in zero, because they are actually exactly the same date and time.
  • Third line says to t1d" I know you think you're time local 15:46, but you're actually 15:46 UTC. " T1d believes that without a doubt. Now the two dates are actually different and separated by the local offset to the hour UTC.

  Hope this makes things clearer because the reason that this code works may not be obvious.

• best way to get the o/p

  Jin
  I get same table 3 times for the desired output. a better way to reach the o/p
  
  begin_date resresents milestine_id 1670
  milestine_id 1690 resresents end_date
  
  begindate and end_date are not present for 672798, they should be shown as null. so, I'm using outerjoin
  

  WITH table1 AS
       (SELECT '672797' tin, '1670' milestone_id,
               TO_DATE ('07/1/2009', 'mm/dd/yyyy') milestone_date
          FROM DUAL
        UNION ALL
        SELECT '672797' tin, '1690' milestone_id,
               TO_DATE ('07/20/2009', 'mm/dd/yyyy') milestone_date
          FROM DUAL
        UNION ALL
        SELECT '672798' tin, '100' milestone_id, NULL AS milestone_date
          FROM DUAL
        UNION ALL
        SELECT '672798' tin, '200' milestone_id, NULL AS milestone_date
          FROM DUAL)
  SELECT  c.tin , a.milestone_date as begin_date ,  b.milestone_date as end_date
    FROM table1 a, table1 b , table1 c
    where c.tin = a.tin(+)
    and c.tin = b.tin(+)
    and a.milestone_id(+) = 1670
    and b.milestone_id(+) = 1690
    group by c.tin , a.milestone_date  ,  b.milestone_date;

  o/p required
  
  begin_date Tin end_date
  672797 7/1/2009 7/20/2009
  672798
  
  Published by: DeepakDevarapalli on October 23, 2009 11:17

  I hope I understood the right of prescription. I did use a swivel technique to retrieve results from the same table.

  SQL> WITH table1 AS
    2       (SELECT '672797' tin, '1670' milestone_id,
    3               TO_DATE ('07/1/2009', 'mm/dd/yyyy') milestone_date
    4          FROM DUAL
    5        UNION ALL
    6        SELECT '672797' tin, '1690' milestone_id,
    7               TO_DATE ('07/20/2009', 'mm/dd/yyyy') milestone_date
    8          FROM DUAL
    9        UNION ALL
   10        SELECT '672798' tin, '100' milestone_id, NULL AS milestone_date
   11          FROM DUAL
   12        UNION ALL
   13        SELECT '672798' tin, '200' milestone_id, NULL AS milestone_date
   14          FROM DUAL)
   15  SELECT  TIN
   16  ,       MAX(DECODE(MILESTONE_ID,1670,MILESTONE_DATE))        AS BEGIN_DATE
   17  ,       MAX(DECODE(MILESTONE_ID,1690,MILESTONE_DATE))        AS END_DATE
   18  FROM    table1
   19  GROUP BY TIN
   20  ORDER BY TIN
   21  /
  
  TIN    BEGIN_DATE          END_DATE
  ------ ------------------- -------------------
  672797 07/01/2009 00:00:00 07/20/2009 00:00:00
  672798
  

• Pavilion 500-281: where to install a SSD and the best way to get the operating system on it

  I have a Pavilion nine 500-281 with Win 7. I bouight a SSD 128 GB to load the operating system on it.  Where can I get inside the chassis? It seem not to be berries of classical records. It came with an adapter with the screw plate, but it's not obvious where I was able to ride the thing!

  In addition, can I just run a restore to get the OS on the SSD drive, once I have installed?  I received instructions with the SSD for ADATA software copy an image of the disk, but all I want is the operating system.  I'm dying to start using my new computer, but I think I want to get the reader installed first before you make any changes that he.

  Hello

  Review the #8 message in this thread.  Not all models of the 500 - 2xx Pavilion are provisioned for the SSD in the location as shown.  In the indicated installation, an adapter plate was not necessary.

  Most SSD manufacturers have free software migration.  I suggest that you image the entire HD, all partitions even hidden partitions.  Some of the more recent migration software will allow you to exclude your data records.

• Adding videos to a site. the best way to get the best result (for the customer)

  Hi all

  
  

  Here's a new question, I asked myself.

  
  

  I have to add some videos to the website of the client. Short. About 15-30 MB each.

  So we will not have to wait forever for them to start playing, it is best to:

  
  

  1. Load them all with the rest of the web site in two different formats, so they will play on most of the browsers, then use a video widget in Muse.

  Of course, creating a massive gigantic site.

  
  

  2. Create a channel private on Utube, download all here paste them the youtube ID in a youtube Widget in Muse?

  
  

  3. Another way?

  
  

  Also is there a scrolling effect method so let's say the video is at the bottom of the page and it will only start when through us it.

  Kind regards

  M

  YouTube or Vimeo.

  These 3rd party services are free, they have a fast hosting, they work on all devices and browsers, and the customer can manage/edit video easily.

• What is the best way to get the print screens clear?

  Hello

  I didn't know where else to post this so I thought I would try here.

  I have various programs that I sell on ebay and I need clear photos of my different screens on ebay.    Can someone tell me how to get clear jpgs from my shutters?

  Thank you

  Phil

  Could you explain the problems you encounter. A screen
  shot should look exactly like the screen you copied.

  FWIW... the tool captures of Vista might be worth a try:

  Windows Vista-
  Activate the Vista Snipping Tool
  http://www.PCWorld.com/article/137099/activate_vistas_snipping_tool.html

  Use capture tool to capture screenshots
  http://Windows.Microsoft.com/en-us/Windows-Vista/use-Snipping-Tool-to-capture-screen-shots

  Vista tutorial - How to use the tool captures of Vista
  http://www.Vistax64.com/tutorials/148532-how-use-Snipping-Tool-Vista.html

• best way to get the web service XML JSON etc legacy database

  We have a bunch of old scientific databases for which we would like to expose data via an XML web service.  International XML schemas have been developed in the standards for the sharing of these data we need to provide the data in.  These patterns have very different data of our legacy data structures.  We want to leave our databases within the same structures but to expose the data in them in the XML schemas.

  Building SQL indications XMLFOREST SQL etc. that returns the XML doesn't seem very practical that the structures are very different and the SQL must be very very complex and would be very tedious to make and maintain.  Is there another way to make in the database?  There are tools outside the database such as who can help in that we used in the past and could be used again - but I had much rather that on the database if possible.

  Building SQL indications XMLFOREST SQL etc. that returns the XML doesn't seem very practical that the structures are very different and the SQL must be very very complex and would be very tedious to make and maintain.

  Using SQL/XML is the most flexible way to generate XML from relational data, as you have full control over what you do.

  If the target XML structure is complex, any method will be complex to implement completely in the database anyway.

  There is no tool integrated with Oracle that would take an XML schema and make the mapping with relational data.

  What you can do is a third-party tool allows to design a XSLT stylesheet that would take care of transforming an XML format canonical (easily created from the database of a query) in the target XML instance.

  In this way the complexity lies in the style sheet, and the real transformation could be made within the database.

• Size of the individual partitions - the best way to get

  Hello
  
  
  Using Oracle 11.2.0.3
  
  We have a table partitioned by date range.
  
  We want to create separate storage for each partition.
  
  What is the best way to get the size of each partition (MB/GB, etc.).
  
  Thank you

  select segment_name, partition_name, bytes/1024
  from user_segments
  where segment_name = '&table_name';
  

  Note: The nom_segment in WHERE USER_SEGMENTS is the name of the table. The name of the Partition appears in the column Where USER_SEGMENTS nom_partition.

  Hemant K Collette

• What is the best way to get a Table name in Oracle Applications: 12.1.1 (web)

  Hello friends...
  
  
  I need your help my friends...
  
  
  We are currently working on Oracle Applications: 12.1.1
  
  I would like to know the best way to get the name of the Table to form based on a Web...
  
  
  Concerning
  
  Yas.

  Hello

  Please see this thread and documents referenced in it.

  RECORD HISTORY (or) COLUMNS in R12?
  RECORD HISTORY (or) COLUMNS in R12?

  Kind regards
  Hussein

• What is the best way to get rid of computer viruses?

  Original title: virus windows support system.

  the best way to get rid of this thing?

  Hi DavidStirling7777,

  (a) I recommend you run a virus scan online from the link given below and check if it helps.

  http://OneCare.live.com/site/en-NZ/default.htm?mkt=en-NZ

  Also, make sure that you have the latest update of the software antivirus installed on your computer, so that it works correctly.

  (b) If you don't have any software antivirus installed, you can download & install Microsoft Security Essentials on your machine.

  Hope the helps of information.

  Please post back and we do know.

• I'm looking for the best way and the best way to get a product key for my windows 7 Edition family.

  Hello.  I'm looking for the best way and the best way to get a product key for my windows 7 Edition family.  Thanks Bob

  Original title: product windows keys 7

  The cheapest option is the OEM System Builder for Windows 7 Home Premium license, but has some license restrictions:

  Amazon.com: Windows 7 Home Premium 64 - Bit System Builder...

  The OEM of Windows 7 versions are identical to the versions commercial full license with the following exception:

  -OEM versions don't offer any free direct support from Microsoft technical support Microsoft

  -OEM Licenses are tied to the computer first you install and activate it on

  -OEM versions allow all hardware upgrades except for an upgrade to a different model motherboard

  -OEM versions does not move directly from an older Windows operating system

  What is OEM software? :
  http://support.Microsoft.com/GP/oemsupport_1/en-GB

  Licensing FAQ:
  http://www.Microsoft.com/OEM/en/licensing/sblicensing/pages/licensing_faq.aspx

  OR

  A detail that does not have these restrictions:

  Where can I still get Windows 7?

  Full version - Microsoft Windows 7 Home Premium

  Version upgrade - Microsoft Windows 7 Home Premium Upgrade

  Family Pack: Upgrade of Microsoft Windows 7 Home Premium Family Pack (3 users)