Best way to measure accurately the activity of hiking on Apple Watch

Similar Questions

• I currently have creative cloud of a photographer.  I must add my subscription first.  What is the best way to go with the best available prices?

  I currently have creative cloud of a photographer.  I must add my subscription first.  What is the best way to go with the best available prices?

  Hello

  Please see the pricing and membership creative cloud plans | Adobe Creative Cloud for plans.

  Otherwise, you can talk with the sales of Adobe as well.

  I recommend going for the plan of single-app.

  Kind regards

  Sheena

• Can I synchronize the activity of health between two watches from Apple?

  I have two Apple - one for work, one for out watches. If I change watches in the middle of the day, the follow-up of the first watch of activity is not synchronized with the second watch. Is it possible to enable this so that the follow-up activity is specific for the whole day?

  Thank you!

  N ° it is not possible to synchronize the activity of health between two watches from Apple.

• my Apple Watch does not record the data of my activity on my iPhone. The application of the activity is implemented on my watch and twinned with phone and not yet to record data.

  my Apple Watch does not record the data of my activity on my iPhone. The application of the activity is implemented on my watch and twinned with phone and not yet to record data.

  HI - try the following steps:

  On your iPhone close application of activity and also, if it runs in the background, the health app (you can close open apps, including the app shows):

  -Double-click the Home button, and then drag upward on each of the app previews to close.

  It can help to restart your iPhone and your watch. Turn on both devices off the power together first, and then restart your iPhone before restarting your watch:

  -To switch off your watch: press and hold the button side until you see the cursor off the power; slide it to turn off;

  -To switch on: press and hold the side button until you see the Apple logo.

  If this does not resolve the problem, try next disconnect and rematching of your watch:

  -L'app shows on your iPhone shows backups automatically, including a new when the unpairing via the application.

  -Choose to restore the watch (backup restore) when provided the opportunity during the whole.

  -Most of the data and settings will be restored, with a few exceptions (for example cards Pay Apple, access code).

  - Pairing your Apple Watch and Support Apple - iPhone

  - Set up your Apple Watch - Apple Support

• Is there an easy way to download all the adobe photoshop tutorials video to watch offline on a trip?

  Is there an easy way to download all the adobe photoshop tutorials video to watch offline on a trip?

  Thank you

  If you buy something like that, you can watch whenever you want: 15 http://www.adobepress.com/store/adobe-photoshop-cc-2015-release-learn-by-video-97801343841

• I have an iMac 27' 2012 with macOS Sierra and Apple Watch with watch OS 3, I can use the function "Log?" in Apple Watch

  I have an iMac 27' 2012 with macOS Sierra and Apple Watch with watch OS 3, I can use the function "Log?" in Apple Watch

  Hi John 2078 Tito.

  I understand that you have updated your iMac and Apple Watch and now you're curious about unlock your iMac using your Apple Watch. I know that it is a nice feature to be able to quickly and safely unlock your computer, so I'm happy to help you.

  This feature is available on 2013 iMacs and later versions, which means that your iMac won't be compatible. You can see more info on this feature here:
  Unlock your Mac with Apple Watch - Apple Watch user's Guide

  Thank you for using communities Support from Apple. See you soon!

• best way to measure the thermistor

  Hello!

  We are looking for a solution for measuring temperature thermistor. I've read the material resources OR recommend for the thermistor measures.
  Can you give me some ideas other alternatives for usable material temperature through resistance (we would use the default configuration, excitation of 2.5 Volts and a resistance of 5 + thermistor). So we need something capable of giving 2, 5V output and to measure the tension caused falling across the thermistor.

  Would be a NI USB-6009 suitable for this task? I guess that the resolution is not enough maybe?
  Another option might be cheaper with a USB-GPIB interface Keithley 2010 multimeter, but in this case what should we use as a reference of tension?

  Thanks for the tips!

  I want to second opinion to Henrik about repeatability in high resolution.  Measures of temperature with Thermistors are particularly difficult.  You have to worry:

  1. Auto-echauffants because of the power generated by the excitation current
  
  
  2. Time to balance the thermistor and electronic
  
  
  3. Stability of the excitation source
  
  
  4. Stability of the measuring device

  In general, if you want something more than about 1% reproducibility, things start to me interesting.  Of course, it's what makes it fun to do.

  If you go the road of the sound card, remember that while most modern computers have quite high resolution a/d (sometimes up to 24 bits at 96 kHz) converters, you must watch the noise figures to get what you can actually solve.  Off-board solutions (e.g., M - Audio Delta 44) will give you the best numbers of noise, since the ADCs are isolated from noisy inside your computer.

  Good luck and have fun.

• Best way to generate signals of activation (square wave) with my 9401 on my 9022?

  Hi, I tried seriously over the past two days to find the best way to do it. I am trying to generate a very precise square wave, controlling the duty cycle and frequency, with the OID on the 9401 in testbed cRIO 9022.

  I have a VI that is theoretically able to do this, but whenever I try to go above 5 Hz or more, duty cycle and frequency becomes inaccurate (I have watch on an oscilloscope), various a lot too for my needs. I have a feeling that this is caused by my addiction on the calendar software controlled, with errors at the time (of the ms order) accumulate as they get processed and the signal is sent. I have attached a piece of code that illustrates the basic idea of what my VI have in them.

  I have avoided the square wave generators integrated because I could never work to satisfaction, but I can work with them so that will solve my problems. Selection structures and cases prevent the user to exaggerate their inputs. Unwaited so the loop was just to test.

  I'm running the 9022 as target in real time, but also tried to run in the FPGA and I was able to produce much more accurate signals using FPGA VI square wave, displaying a Boolean variable, but I couldn't see the best way to get double precision variables to work with everything (and I want more precision than variables FXP enabled clock 40 MHz).

  I feel there is just a mistake in my approach here. I've seen other discussions where people throw around using meters to edge of the test bench to produce a square wave, and I see the example screws as Gen dig pulse - continuous Train, I'm not sure if initially these screws DAQmx for my situation (eg. How to identify my counters, because they are clearly not Dev1/ctr0 by default in these examples)

  Thank you

  Dealing with the representation of Point fixed and all is a reality for LabVIEW FPGA<= 2011="" programmers.=""  you="" might="" build="" a="" small="" sub="" vi,="" such="" as="" the="" one="" attached,="" to="" encapsulate="" the="" frequency="" calculation,="" thereby="" abstracting="" the="" conversion="" formula="" and="" fixed="" point="" data="" type.=""  you="" can="" adjust="" the="" properties="" of="" the="" floating="" point="" input="" control="" to="" accept="" only="" valid="">

  

  This implies the series VI void on the host of the RT, and not on the FPGA target.  So, you also need nodes in the Palette of the FPGA Interface to send PWM fixed Point RT frequency to the FPGA.  The complete solution of frequency may resemble the following.  It is common for FPGA programmers to build a collection of thesesub screw, that make up the API for hardware.

  

  Note that 40 MHz is hard-coded.  For increased flexibility, consider making the FPGA clock rate an entry to the Subvi with a default value of 40 MHz.

  -Steve

• What is the best way to clean all the files of the user of a PC under Win98?

  What IS THE BEST WAY to CLEAN ALL USER FILES FROM A PC the wIN98

  Hi Col BROWN,

  Please see the following article on how to perform a clean install:

  http://support.Microsoft.com/kb/221829

  In addition, for more information, please see the following article:

  http://support.Microsoft.com/kb/835826

  I hope this helps!

• What is the best way to deal with the events of Qml-components of java script or C++?

  Hello

  Please suggest which is the best way to treat the Qml-components signal in the manuscript of java or C++.

  can read contacts in javaScript?

  When you want to make things more complex: Yes.
  QT made it much easier for me as a java developer, bb, but you will need to learn some basics.

• Best way to measure download Mb?

  Hey people. Summer watching various listeners remains to find a way to measure the download in KB or MB. He would use the browser or even a video call. The code?

  TKS

  J

  Since the boot device

• What is the "best way" to see all the 'hooks' that affect the database?

  Hi all

  I'm responsible for exporting all schemas using the data pump and then re - import the scehmas, yet once so we can reorganize the real table spaces.

  I know that this can be done using grid 12 c, but I'm not sure I want to use this feature for this task.

  Anyone who has used the feature of grids to 'keep the tables' and then re - organize them while they are still online?

  I'll have to finally make it to the PROD database and I am concerned about the "break" out of jobs, items, ect, ect.

  What is the "best way" to do a proper verification of all database objects and or work, that the export/import might pipe upward?

  As I did for example, a simple count on all objects and of course excludes "SYS and SYSTEM" and the County was in close 60 000 objects.

  How do I know all 'hooks' that are inside the database? What is the way that do you?

  Thank you

  Lady Allora.

  Hi, Justin.

  I think that's what I'm going the way of...

  Select os_username, username, OWNER, dba_audit_trail SQL_TEXT

  where rownum<>

  where username <> 'SYSTEM '.

  and also have different variations all asking questions them the same point of view...

  Modes of verification do you find useful?

  Also I'm using something like this as well.

  Select "check standard", sessionid,

  proxy_sessionid statementid, entryid, extended_timestamp, global_uid,

  username, client_id, null, os_username, userhost, os_process, terminal,

  instance_number, owner, obj_name, null, new_owner,

  new_name, action, action_name, audit_option, transactionid, returncode,

  SNA, comment_text, sql_bind, sql_text,

  obj_privilege, sys_privilege, admin_option, dealer, priv_used,.

  ses_actions, logoff_time, logoff_lread, logoff_pread, logoff_lwrite,

  logoff_dlock, session_cpu

  Of

  dba_audit_trail

  where rownum<>

  order extended_timestamp;

  Thank you

  Lady Allora.

• What is the best way/procedure to check the s10-3/Lenovo updates?

  What is the best way to get updates and drivers Lenovo... ect for my new s10-3.  Thank you, Bill

  Yes, that's correct. In addition, you will notice that most of the drivers have been downloaded 12/31/09. Something more recent that this means that it is a driver newly updated and you can download it.

• What is the best way to deal with the pages being removed from the site in British Colombia?

  A customer wants a page removed from their Web site; What is the best way to go about removing/deleting a page in British Colombia and keep all attributed to the laid-off page SEO ranking?

  Should I delete the page and then add URL redirect via the module to redirect BC a relevant page.

  or

  I have to keep the page alive but 301 redirect using the property of the redirection page 301 in addition to Options?

  One is better than the other?

  Redirect via the page is there if you want to keep the page for any reason content wise, etc. in the admin. Web site wise is no different. A 301 redirect is a redirect 301 Grant, there is no difference.

• the best way to deal with the changed values maskMode?

  Hi people

  I just found out that the values listed for maskModes have changed between CC14 and CC15 who broke most of my scripts of masking.

  IE MaskMode.ADD in CC14 has the value 6413 but CC15 is 6813.

  What is the best way to deal with this? is there a simple solution or what I need to check the version of AE which is used and adjust from there?

  is there a direct way to access the name ie "MaskMode.ADD" instead of the value?

  Thanks... /JL

  To get the string maskMode by the current mask, you can loop through all the values possible maskmodes and stop when you click on:

  for (var k in MaskMode){
      if (myMask.maskMode === MaskMode[k]) break;
      };
  // at this stage k is the maskMode string (eg: "ADD")
  

  Xavier