Betacam 3D

Hello everyone. I have a HP Pavilion G6 2136tx. I would like to know if my laptop has 3d capabilities or not.

Hello

The following links show the specifications of your computer:

http://support.HP.com/us-en/document/c03424203

In terms of 3D: no - you can play 3D movies but is true 3D is a no.

Kind regards.

Tags: Notebooks

Similar Questions

  • What are the reasons to keep me in troubled Betacam wireless

    my computer laptop acer AOD D255, whenever I turned on the laptop, the Betacam wireless is always disabled, even if the router is at only a few steps. the wireless signal is always off and asking turn on WiFi and even I press the FN F3, it does not help and no reaction from the signal. What should I do? Please help me solve this problem, I know it's as simple as the nuts to you guys, but for a beginner like me, it's the burden. one more thing, is - this bad to put my phone in recovery more often, it is even with reformatting if I do this more often?

    Hi Kenntuttz,

    Thanks for the reply.

    You can check the link if you want to reinstall Windows 7.

    Installation and reinstallation of Windows 7

    http://Windows.Microsoft.com/en-in/Windows7/installing-and-reinstalling-Windows-7

    Note: Back up your files before you begin reinstalling Windows 7 if possible, even if you have reinstalled Windows 7 on a hard disk partition, and you have personal files on another partition. For example, if you have encrypted files, you will not be able to access them after reinstalling Windows. A custom installation replaces the current version of Windows 7 and all personal files.

    Please update the status of the issue.

    Thank you.

  • BetaCAM SP UVW-1800 Capture in Premiere Pro

    I'm on first Pro CC2015 on Windows 10 using Matrox MXO2 w/MAX with a BetaCAM SP (SONY UVW-1800), attached to the Matrox i/o device drivers Matrox WYSIWYG Windows 8.1 running...

    While it's not exactly as smooth as my VT5 NewTek SX - 8 BoB was several years ago, I have Premiere Pro operating as an analog capture via my Matrox MXO2 device. AWESOME! Thank you Adobe, Matrox and Microsoft. I have a huge amount of exceptional images recorded on cassettes BetaCAM SP and I am now able to ingest footage in Premiere Pro for my G-Tech G-SPEED are 8 TB high performance eSATA RAID Storage for SD/HD Production.

    PS - It would be great if Premiere Elements can supports an e/s of consumer device, as my father has 100s of VHS tapes that he would like to play with.

    Takes to elements first scanning tapes using a 'consumer'... and it has a forum at http://forums.adobe.com/community/premiere_elements/content for you the father to ask questions

    Connect your VCR to the http://www.amazon.com/Grass-Valley-Canopus-77010150100-Converter/dp/B00030ATTO device and the device to your Firewire port

    NOTE - first Elements 13 version no longer works with Firewire, but having your father ask in this forum on the other (free!) software to capture video sound

  • BetaCam SP and Firewire

    If I take an apron in BetaCam SP and plug in an external enclosure Conopus and take firewire from there, my computer is a loss of quality?  I think so, but I don't really know the details...  If I do this what type of sequence settings the way I use to work with?  It would be just NTSC DV?

    Thank you

    Phil

    Technically, Yes, there will be loss of quality because you're going from a 'uncompressed' analog source a 25mbps, 5:1 compressed digital video streams intra-image. This can be minimized as much as possible by using the component on the bridge of Beta - although I'm not sure what Canopus box, you are editing, so you won't have this ability. The ADVC-100/300 have component, so you are limited to composite (ick) or S-video (a little less ick). Combine these factors and technically you will be incurring a loss of quality. In practice, though - it's for you to decide.

    I capture bands SP with a map of Blackmagic DeckLink SP designs, using components. However, I use DV codec that I capture with-in my case, I am satisfied with the quality. When I'm ready to this project, I'm going to go to no compressed, but for most of what I do, DV is sufficient. The shooting game for this project uses a time-top-of-the-line Betacam camcorder, with on a piece of $24,000 of glass at the front. Even capture DV, it is better the pants out of what I've seen most of the camcorders DV - and I don't speak great full DV camcorders as DSR-570. It's amazing what makes a good glass of difference. It's just another thing to consider.

    EDIT: Oh, Yes... If you capture this way, simply use a standard NTSC DV preset. The files that you find are no different from those who come from a miniDV camera.

  • Hard to turn on wireless Betacam

    Windows 7 Toshiba Satellite C655

    I got a blue screen, a week ago and when I turned on my laptop back my wireless capability was disabled. I tried everything from Mobilty Center to troubleshooting and uninstalling and reinstalling my wireless LAN and I'm sure that turn it on is to press the button of the wireless network on my laptop (F8).

    The problem is my laptop keyboard is almost broken. My USB keyboard does not work because the FN keys have different functions and the on-screen keyboard does not work because it uses by default, non-specific computer functions.

    I looked almost everywhere, but I couldn't find a soultion. Is there another way to turn it on?

    You can probably find a replacement keyboard, but that may not be cheap, and unless you're very good at this yourself, you will need the services of a competent technician.  You should evaluate your decision to keep or replace.  Note: IF you want Win7, you can always buy nine notebooks with Win7 for companies such as Dell, if you represent yourself as a company.  I just last week helped a client do this.

  • HP Officejet Pro L7590 - cannot scan - the installation program does not scan Betacam

    I have a HP Officejet Pro L7590 all-in-one connected to my iMac OS X Lion 10.7.4 running, and I can't Scan functionality.

    When I set up the device, it does not recognize that there analysis ability, if I try to scan from the Preferences/Print & Scan window there is no option to do so.

    Also, the HP utility displays no information on digitization.

    When I try to run Scan Manager device HP HP Scan Pro application opens then immediately crashes.

    I tried to reinstall the HP software, but it makes no difference.

    Scanning has worked in the past with the same printer, but not since I installed Lion.

    Suggestions welcome! Thank you very much

    Hello

    The application of HP Scan Pro for Mac OS X 10.4 and 10.5, so it seems you are using older software which are not provided for Lion.

    Please remove completely any HP software installed using the scrubber tool:

    * Please note that the following steps will delete all HP software installed.

    1. click on menu go (click the desktop, then watch the menu in the bar at the top of the page)
    2. Select Applications
    3 select the Hewlett-Packard folder
    4. double-click on uninstall HP application
    5 follow the uninstall to prompt to select a device to uninstall
    6. press and hold Ctrl + Alt + Cmd keys on the keyboard at the same time as you click on uninstall
    7 approve any prompt to uninstall all HP software.

    To avoid any problems due to the use of the software, be sure to repair disk permissions before you reconfigure the printer:

    1. open the Applications folder.
    2. go to the Utilities folder.
    3. double-click on disk utility.
    4 Select the hard disk that contains the boot volume.
    5. go to the first aid tab and select Repair disk permissions.
    Note: This process may take several minutes depending on the Mac and the amount of the permissions that need to be repaired. The journal of the progress will tell you when the process is complete.

    Go into System Preferences > print & Scan

    Click on the sign more and select your printer.

    The latest version of the software for your operating system will be downloaded automatically.

    If the software download fails for any reason, download and install the latest drivers 2.9 HP printer:

    http://support.Apple.com/downloads/DL907/en_US/HewlettPackardPrinterDrivers.dmg

    Now add the printer by following the steps above.

    Below you can find what scan methods can be used with Lion OS x:

    http://support.HP.com/us-en/document/c01910186

    Kind regards

    Shlomi

  • FCP slow?

    Is it possible that an old Mac running 6 FCP can only get tired and slow down? I have a G5 (10.4.11) running FCP 6.0.2.  I have more to use a more recent system now, but I keep it because it is the codec for a few sequences of BetaCam SP that I keep handy, among other things.  I use it mainly for audio work.  Last couple of months, it seems that it is sloooowwwwing down. Do a radio spot and when I hit the space bar to play instead, it stops, and think for a second, then plays very well.  He began to do this on a video production earlier, mostly on things of 1920 x 1080, but now it seems that it does on everything.  Any thoughts on what could be the cause and most importantly, how to fix?

    What is the status of your storage media? You must have fast disks with plenty of free space. Hard drives slow down as soon as you walk through more than 50% capacity.

    Have you tried to screw up your preferences?

    MtD

  • Problems with playback of games on my Satellite L300-13 b

    I hope I've put this in the right forum.

    I tried different games and some of them seem to work, even if my computer exceeds the minimum system requirements.

    For example, I tried to install and play call of duty 2.
    After reducing to the lowest settings possible, the game still does not properly.
    I don't really understand what seems to be the problem.

    The game I'm playing at the moment is to Blood bowl.
    According to the requirements of gaming system, my computer should work fine with this game.
    Curiously, this isn't. I tried to use "system requirements lab" and their program: "can you run".
    However, it shows that I can not run the game, even if my computers Betacam is good enough.

    If anyone knows what could be the problem, please help me.

    Hello

    > After reducing to the lowest possible settings, the game still does not properly.
    If I understand correctly, you are able to start the game but the chart doesn't normally elapse.
    Is this correct?

    Hey mate... Listening
    As far as I know, that this unit was equipped with the graphic chip Intel GL960.
    To be honest this chip chart ist not designed for purposes of games!
    It s a common graphics chip that can be used for a common office of the purpose, but it of not designed for games!

    So you're going to get the game running, but don t expect too much

  • Meet recovery disk

    Hello

    I recently bought Dv6 model Hp laptop with Windows 7 home premium.

    I got to know once obtain registration of laptop Hp, its good to create the disc of recovery (DVD copy) of windows 7 (Recovery Manager) who need help in an emergency to break BONES.

    Fact this recovery disc creation can be done only once (1 copy per laptop)?

    It is an exact copy of windows 7 should I use for resettlement?

    Thank you

    Usually just 2 DVD to burn your game. Don't forget to use a good quality DVD and try not to use rewritable. Rewritable media that can be erased and used more than once are not compatible with the Recovery Manager.

    BTW, once your set is done, any software CD/DVD that has Betacam copy writing can be used to make another series by copying that you do using Recovery Manager.

  • How to enable the WLAN on Satellite L830-114?

    Hi, all of a sudden my laptop says "you are not connected to a network" and I have to activate the Betacam wireless! I have no idea how to proceed. I tried the fn with F12, but this does not solve the problem.

    Any help on this would be appreciated you.

    Thank you

    > all of a sudden my laptop says "you are not connected to a network.
    And when connectivity did you use on this time? WLAN or LAN?

    Anyway, according to specification of laptop that it comes preinstalled with Win7 and using FN + F12, you should be able to toggle the local network card device.
    When you press the FN key you find cards flash at the top of the screen?

  • Upgradinging HP m7760n and AMAP rescue equipment

    Hello
    66 I myself am education to be ready to upgrade this Vista Home premium 32-bit of m7760n Office of Vista Home Premium HP bought in 2007. 5 years for a new life for the parts expensive as MOBO, CPU and cards. It will keep my brain if not active body.

    It is a micro ATX put in place. The link is to provide details on this PC, if you need details to advise me on what material I can hold, including HD 2 X 250 G are OK. Have 2 TB ext). Consider adding boot SSD. Keep the DVD, the front I/O, the USB mouse /keyboard and memory with ports. No existing or future need for the games. Have 2 TB WD ext USB HD 3 closed for archiving.

    http://www.Newegg.com/product/product.aspx?item=N82E16883107286

    New needs are Win 7 Home Premium 64
    USB3 SATA III, 64 bit, RAID 1 to save the content that is not archived (existing 2 G HD @250), WIRELESS n, HDMI and a tuner betterTV receiving HD via air with a resolution of 1080 p channels. (My partner gets dibs first to reality TV). Is it good noon Betacam? for guitar and keyboard apps?

    I'm taking a class on the computer hardware. I have mine opened and am familiar with power SUPPLY and HD/DVD connected hook ups for power and SATA, also the headers that light up and connect to the front switch and map units A/V/USB/Memory, CMOS battery. Original 300W PSU died a week ago. Substitute 400W this week.

    Very grateful for the listed building strategy. I am an ecologist and hope that the Harbourfront units can be upgraded or maintained if necessary.
    Have the time, not money!

    Thank you

    Here are the specifications of your HP Pavilion Media Center m7760n desktop computer and its HP OEM ASUS P5LP - LE Leonite-GL8E mother.

    I think you are trying to push the machine beyond its useful limits. The motherboard has 3 slots PCI and 1 PCIe x 16 slot. 3 PCI slots are already occupied with the modem, b/g wireless and TV tuner cards. We can launch the modem and install a card USB 3 and SATA III. Mix the wireless b/g and install a b/g/n card. mix the TV tuner and install a new TV tuner that gets o-t-a HD install a graphics card with HDMI. So we are shy of slots... we can perhaps use a USB TV tuner or b/g/n wireless card to compensate for the lack of slots. I would get a PSU Corsair CX430 or CX500.

    You may lose the use of the HP software included with the upgrade to Windows 7.

    Let us know if you are still interested in tackling this project.

    Frank

  • The R7000 will receive the update of wave 2 AC

    Just read an article that some higher end AC wireless routers will share the Betacam AC Wave 2 an update of the firmware. I wanted to see if the R7000 will receive this update or should I buy the X 8. I have a 1 GB fibre connection to my house and really try to get the best out there for all my devices.

    Not supported by the hardware, as far as I know

  • Access to internet through sGPS

    Is there a possibility of access to the Internet, surf the web and send emails using the sGPS Betacam in the milestone.

    Thank you.

    first GPS is a one-way street. You can only receive data.

    After doing some research (as I don't have never heard of before sGPS), as far as I understand it is a solution to receive the GPS and data by using only a single antenna.

    But it is indicative.

    Here you can try to guess yourself.

    However, the answer to your question is not

  • Installation of bench beginner for the introduction of analog measures

    Hello world

    I'm looking to install a system to help make some simle measures. This configuration will be used only by me at my desk/Workbench to help me better understand some parts of machine, that I as well as various other hardware troubleshooting. The I want to be able to take common measures are: stress/strain, vibration, temperature, force, torque and movement.

    At this stage, this project is on a small scale. I'm not running from PLC or using data in order to operate a plant. This configuration will be about just myself, my computer and a piece of equipment, I need to test.

    I currently have one 6003 NOR for my use that would be preferable to use, but if I need a stronger DAQ so I can get to the need.

    My main question is if I can get aqeuate with hardware DAQ 6003 and results if I would be able to condition enough signls accompaniment or if I need a DAQ with higher resoluion and a signal conditioner sufficient. My concern is whether or not I will be able to properly signals on status of piezoelectric sensors at vibration action. Is there a way to produce viable results, or I'll have to come back a more capable DAQ? I wish I could do an analysis of the frequency on trees engines operating normally at about 60 Hz. It would be nice if I had the Betacam to observe signals of up to 150-200 Hz at least.  In my case I don't need extremely accurate results if I can go out with an afforable configuration more. I think that a level of trust of value p final (90%) will go well at this time.

    I'm still quite new to data acquisition and signal conditioning. My purpose behind this, especially to learn how to take the right steps correctly more than I worry accurate results.

    If someone could give me their thoughts about this I would be very grateful.

    Thank you kindly,

    James

    James

    I think you need to split the signal conditioning in data acquisition. I suggest you watch the series 7B Analog Devices and some of the imitators, for example Acromag.

    http://www.analog.com/en/products/landing-pages/001/7B/7B-Series-Overview.html

    Essentially, you choose a module specialized for each measure of your choice. The modules are isolated, at least reduce signal interference problems. Sensor excitation, e.g. for the strain gauges is provided on certain modules. You will need to study the performance of frequency to get the 200 Hz on some modules.

    The modules plug in a motherboard that can then be connected to any data acquisition system that you like.

    Or the versatile NI9219 can better meet your needs.

  • Connection to CVS GigE camera via a network switch

    It is a fundamental and very simple question!

    I intend to connect two GigE cameras to NI CVS-1458RT for an application of Imaging. When I tested the configuration in MAX, I realized that I can connect the cameras directly to the PoE ports, or alternatively, connect the cameras directly to the network switch and in both cases, connect the CVS to my network via its ethernet port. I was wondering if there is a benefit by connecting directly the VCA cameras, if I do not anticipate supply their Poe or if my switch has PoE Betacam.

    Thank you

    Usually, you always want your cameras on dedicated lines, or at least only sharing bandwidth with other devices. The mechanism of transport used by GigE Vision isn't really sharing good bandwidth with other devices. If you only share the bandwidth on a link given with other devices, you can throttle each take only a percentage of the total bandwidth. If you have devices without camera on the link, they don't usually have a mechanism to control the gap inter-frame limitation insofar as GigE vision made which would be necessary for properly sharing the bandwidth without remove the packages of bandwidth.

    If you end up sharing one of the ports for the operation and configuration of the CVS on the network, you will be at the risk of losing image data packets whenever the rest of the traffic is sent. Although there are mechanisms in place to return data, these add latency and jitter to your purchase.

    Eric

Maybe you are looking for