Big problem in the finder then the copy of the file trought different drivers

Similar Questions

• Big problem with the files and Settings Transfer Wizard.

  Basically, what has happened here, it is that I did a backup of the files on the computer of a friend with the wizard to transfer to an external hard drive, but I started on the old computer and for one reason or another never get the CD Wizard so I thought that I was OK.  Don't think.  The idea was to have the backup files in case I needed to reformat the drive hard, I ended up reformatting the drive and when I finally got the installation more done with trying to run the file and Settings Wizard and when I chose the external drive that files were on and then subsequently the folder and it said that it did not contain information.  So basically I'm stuck with a complete record of .dat files, and the wizard will not let me extract the files off the drive.  Is there anyway that I can return information about the files, or I'm totally finished.

  Everything worked ok that it proved just that he did not want to me to choose the actual file as a path, but the hard drive.  It was just something simple that I pop up.  Thanks for the help but I don't know that it would have been the next problem if I didn't had not updated the operating system first.

• big problems after the installation of Yosemite (10.10.2) with Photoshop CS6... The program crashes - last time 10 times during my working session... wacomtable does not work... It's slow... and receive errors on the graphics card... It s a terror to work

  big problems after the installation of Yosemite (10.10.2) with Photoshop CS6... The program crashes - last time 10 times during my working session... wacomtable does not work... It's slow... and receive errors on the graphics card... It s a terror to work with my beloved Photoshop!

  Yosemite upgrade very often damage existing Photoshop.  I thank Apple for that.

  You must uninstall and reinstall Photoshop, then apply all the updates of Photoshop from scratch.

  But first, give us details about your configuration:

  STANDARD TEXT:

  Note that it is standard text.

  If you give complete and detailed information on your configuration and the issue,

  as your platform (Mac or Win),.

  accurate versions of your operating system, Photoshop (not just "CS6", but something like CS6v.13.0.6) and the bridge.

  your settings in Photoshop > Preferences > performance

  the type of file you were working.

  specifications of the machine, such as total installed RAM, scratch file HDs, total available disk space, video card specifications, including total VRAM installed.

  What troubleshooting steps you have taken so far

  what you receive, error messages

  If problems of opening raw files also the exact camera brand and model that generated

  If you experience problems printing, specify the exact brand and model of your printer, the size of the paper, the dimensions of the image in pixels (so many pixels wide by pixels high). If going through a TEAR, specify that too.

  A capture of your settings, or the screen image could be very useful also,

  etc.,.

  someone may be able to help you (not necessarily this poster, which is not a Windows user).

  Read this FAQ to get advice on how to ask your questions correctly to get faster and better answers:

  http://forums.Adobe.com/thread/419981?TSTART=0

  Thank you!

• Big problem on the latest version of the HP Server cloning

  Hi Hussein.
  
  EBS 11i
  Oracle 9.2.0.6
  
  I had a big problem: (huhuhu
  The old server (single node) currently has a problem of performance degradation.
  I have recommended buying HP hi-end servers and multi-user config installation.
  
  We've got HP Proliant BL460c Server Blade G7
  The seller said, a version of RedHat 5 is supported only
  
  I want to have a faster migration so that cloning is transparent, which is why I want to try to install RHEL 4
  Because the docs says Oracle 9i is not supported on RHEL 5? :(
  
  Can you recommend me the best and the best way to upgrade/migration/clone to the more recent servers?
  
  These are applications 11i support on RHEL5? If it is, why not Oracle 9i? Its so disappointing some are supported and
  Some are not, why not all or nothing. :(
  
  
  
  
  Thank you very much
  
  Mrs. Mina

  The first doc referenced above (Note: 881505.1) is the main doc for this upgrade. For other doctors, you would need to refer to some (or all) depends on your installation/configuration.

  Thank you
  Hussein

• When starting a warning pops up saying he had problems with the file: XBD EXE that can be done to correct it?

  When starting a warning pops up saying he had problems with the file: XBD EXE that can be done to correct it?

  Hi r13hunter,

  It seems that some programs running on the computer fails to load at startup of the system. Try these steps and check the result.
  Step 1: Find the program that causes this problem and delete or fix
  a. Click Start, type msconfig and press to enter.
  b. click on Startup tab, in the list, search for the path of the xbd.exe file and the associated program.
  c. Once you have found the path of the item and the associated program, repair or reinstall the program.
  See Uninstall or change a program

  Step 2: If the problem persists, perform the clean boot to find this good program that is causing the problem to the system startup
  a. open the article: http://support.microsoft.com/kb/929135
  b. Article, follow "step 1: perform a clean boot" the implementation of these measures will disable all programs not Microsoft currently running on the computer.
  c. restart the computer and check if the problem persists.
  d. If the problem does not persist in the boot, it means that some programs non-Microsoft is the source of the problem.
  e. to find the program that is causing the problem, try "step 2: enable half the services" to "step 6: resolve the problem.
  f. Once you find the culprit, check if there is any updates to update or fixes to the program. If you find, install them and check the difference or reinstall the latest program.
  g. Article, follow "step 7: reset the computer to start as usual.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I just did a check of norton power Eraser which revealed that I have a problem with the file ntsd.exe.

  original title: problem with file ntsd.exe

  I just did a check of norton power Eraser which revealed that I have a problem with the file ntsd.exe. Does anyone have suggestions about what to do to fix it? Thank you very much.

  Hi JohnABuckley,

  • Are you facing any problem on the computer?

  Ntsd.exe is a process belonging to the Microsoft symbolic debugger that lets you debug applications in user mode.

  As the link below, it says that there is a risk that Norton Power Eraser can select some legitimate programs for removal. You should carefully review the analysis results page before deleting the files. I suggest that you don't delete the file unless you are facing problems with the computer.

  https://www-secure.Symantec.com/Norton-support/JSP/help-solutions.jsp?LG=English&CT=us&docid=20100824120155EN&product=home&version=1&PVID=f-home

• Error when you try to play audio files: Windows Media Player has encountered a problem reading the file. for further assistance, click web help

  8007007E tips

  There is also another number which is C00D11B1, but both have to do with the lock of the music in windows media player, the message said:-"Windows media player has encountered a problem reading the file; for help click web help. ""- and that of all, but when ' web help ' click on the show numbers that are 8007007E and C00D11B1 and average music, not Windows media player, y at - it someone with the same problem that has been able to solve? Thank you, let me know, if you don't mind, thank you again.

  I suggest re-download you WMP 11 from the following link and install it on top of the current installation:

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=1d224714-e238-4E45-8668-5166114010ca

  Who help me?

  If this isn't the case, please report the file type (extension) of the file you are trying to play. For instructions on how to make Windows Explorer shows the file types, see this link:

  http://www.windowsreference.com/Windows-XP/how-to-view-all-file-extensions-in-Windows-XP

• Windows media player encountered a problem burning the file on the disk

  What does that mean? Im trying to burn music to a disk and keep getting this msg... HELP... windows media player encountered a problem burning the file on the disk

  Hi michealarthur,

  Here are a few things to try:

  1. make sure that the disc is clean.

  2. Select a recording speed (write) more slow for the CD burner.

  3. try a different brand of blank discs.

  4. stop all other programs that are running.

  5 disable any programs that could activate themselves, while burning is in progress, such as screensavers or anti-virus programs.

  6. defragment your hard drive.

  7. make sure that the hard drive does not use disk compression.

  Change settings for burning a CD or DVD in Windows Media Player

  http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-burning-a-CD-or-DVD-in-Windows-Media-Player

  Also...

  You can try this procedure to restore your windows media player.

  (1) Perform SFC first. Follow the link on how to make SFC (http://support.microsoft.com/kb/929833)

  (2) turn on / off Windows Media Player again.

  a. go to start and in the search type 'Turn Windows has or not'.

  b. click on the "Turn Windows features on or off".

  c. check the "media features.

  d. restart the computer.

  You can also try restore (http://windows.microsoft.com/en-us/windows7/products/features/system-restore) your computer to the final point where windows media player worked.

  Or you can use the previous versions of windows media player that comes from restore points or windows backup.

  Or you can try to run 'Fixit '.

  http://support.Microsoft.com/mats/windows_media_player_diagnostic/

• The problem with the file sharing by mail from the contextual menu in the Finder.

  When I want to send a file by email from the Finder, I do a right-click on the file and choose 'Sharing'-> 'Mail '. I expect to see the new e-mail message with the attached to the message of failure.

  But nothing happens and the Finder stop responding and I have to "Force quit" them.

  My configuration:

  MacBook Pro (retina, 13 inches, end of 2012), 2.5 GHz Intel Core i5, 8 GB 1600 MHz DDR3, HD 4000 1536 MB, version OS X El Capitan 10.11.3 graphics card

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  The title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  Click on the clear view icon in the toolbar. Then take an action that does not work the way you expect. Select all of the lines that appear in the Console window. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name or e-mail address, can appear in the log. Anonymize before posting.

  When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• Big problem with the meta description and meta title

  I am affront a big problem...

  My site is designated by "Site under construction" on Google. I would like to write for example: 'Loli - cookies of the Italy' and write a description - what is very professional.

  So, how could I change Meta title and description meta on my site?

  Make sure it is understood this is a real example:

  I want to do

  https://www.Google.fr/webhp?SourceID=chrome-instant & ion = 1 & ESPV = 2 & ie = UTF - 8 #q = Louis % 20XVI

  First result is write: "' Louis XVI of France - wikipedia" "

  And description:

  Louis XVI , born on 23 August 1754 in Versailles and guillotined in Paris Revolution Square on January 21, 1793, is King of France and Navarre from 1774 1791 then...

  
  

  -For me, it is write: "Site under construction" in the title and description.

  Best regards!

  Hello

  Choose Page > Page Properties

  In the Page Properties dialog box, click the metadata tab to access the fields where you can enter the metadata information in the fields provided

  To see more education, check this box

  Adobe help Muse | Optimization strategies Muse sites for search engines

• Big problem with the D810 images

  I have a big problem with lightroom. He presents objects in images to avoid. An example is the following:

  

  The same image converted with Nikon ViewNX 2, does to 16 bit TIF and reimported into Lightroom is much better:

  

  Is there something I can do? Is there a problem with my settings? Is this a known on the side of lightroom problem? Will there be improvements corrections? This may be due to active d-lightning without knowing about this in lightroom?

  Thanks for any help and suggestions!

  There is a problem of Posterization with the camera matching profiles having Lightroom for the D810. This could well be her. As I know there is no update for those yet. Try a different camera such as Adobe Standard profile. If this resolves the Posterization that this question and you will have to wait for the next update of Lightroom to get updated profiles to update (I hope).

  > This can be caused by active d-lightning without knowing about this in lightroom?

  No, but it is advisable not to use all modes like this in camera when you use Lightroom or any other software gross non-Nikon because all that camera RAW isn't to underexpose it and save a statement to apply treatment HDR with Nikon raw software. Other software will not be able to read as the statement and it will make images appear underexposed because they are in reality.

• A big problem with the touch sensor A / V controls!

  My model is VGN-CS320J. Touch sensor A / V controls had been working properly until I installed Windows 7 Professional on my computer. These controls have now stopped working. I can drag is no longer my fingers to adjust the volume. Although I tried to reinstall "Synaptics pointing device", they always fail.
  Could someone help me?

  Hello 918353, the user

  Apologies, you have problems after the upgrade to windows7
  not all features will transfer to windows7 from vista as it is noted in the two methods.

  Upgrade (Recommended)
  [url: 2zl7xsgr] http://esupport.sony.com/US/perl/support-info.pl?info_id=508 [/ url: 2zl7xsgr]

  Clean install
  [url: 2zl7xsgr] http://esupport.sony.com/US/perl/support-info.pl?info_id=507 [/ url: 2zl7xsgr]

  However, for just the shortcut keys that you speak, those who would fall under the control of the laptop and utility found here
  [url: 2zl7xsgr] http://esupport.sony.com/US/perl/swu-list.pl?mdl=VGNCS320J&SelectOS=47 [/ url: 2zl7xsgr]

  If this does not help try reaching us via live chat!
  [url: 2zl7xsgr] http://www.omnitechsupport.com/sony/index.php?queue=ComputerPFS&OWChat=1&VARSET_MODELNUM=VGNCS320J [/ url: 2zl7xsgr]

  Best regards
  Kimberly

• BlackBerry Smartphones big problem with the torch 9800

  Hi mangment

  I have me Saudi Arabia, my services blackberry torch bay is STC

  but I have more problem needing urgent fixed yoyr end to avoid any problems with the client

  I give you the problem:

  -slow Internet a few open time nd not to open some time must be restart my phone

  Facebook - last worm is not working nd nd nd rss my spase twtier

  -software update blackberry form each time give no avalbel update

  -hang up

  -the slow volume

  -the world of the app does not work in Saudi Arabia

  -My worm's last 6.0.0.246 but still you are not average to resolv urgnet need resolve or

  I need torch nd my mony due am customer feedback

  thnks alharbi

  Yes, you should be able to update the device without problem.

  For other questions, please contact your technical service provider support. If they cannot help you resolve anything, ask them to bring the issue to a level RIM tech support person.

  Good luck

• Big problem after the extend of editing in the browser? When the corrected mistakes?

  Since the French in new - browser edition lie in recent weeks are huge problems for the pages on external servers, IE outside of the Server Business Catalyst. The software is more stable. If you go to Google, Firefox or Safari. Fails and the data cannot be loaded.
  When errors are corrected?

  Hi Werner. We (the engineering team) found the cause of the problem and are working on a fix as I type. There is a problem with how we detect modifiable, blocks of text online (inside a block of text that is attached to the block or group) which causes a pretty bad fall.

  It may take a few days to test and deploy. As soon as it is fixed, we will update this thread with your client's file. Thank you for your patience.

• A big problem with the connection pleaaaasssse help me

  Hi all

  yesterday everything worked fine

  I wanted to migrate hosts of virtual switch to vds

  Now, nothing works

  The problem is the esxi how nsx is.

  failure of the connection with this host

  When I want to configure the IP settings with command line, I can not configure the gateway, the error is that the network is unreachable.

  so I can't connect to the vcsa

  I created a new switch, but I have the same error

  Please help me. is the work of my thesis, and the date limit is close

  Thank you

  Thank you for all

  I deleted esxi nsx and restoration