big problems after the installation of Yosemite (10.10.2) with Photoshop CS6... The program crashes - last time 10 times during my working session... wacomtable does not work... It's slow... and receive errors on the graphics card... It s a terror to work

Similar Questions

• JPEG and RAW is more displayed on my screen. even after the graphics card update

  JPEG and RAW is more displayed on my screen. even after the graphics card update

  Click on edit and click Preferences, and then choose the last option which is camera raw.

  on the camera raw preferences, in the lower window, uncheck the box use Gpu option and then restart Photoshop and try again

• T400 own install problem for the graphics card hybrid

  I did a clean install on the T400 and installed all the drivers that are essential under the SWTools folder, but I see a problem with the card ATI will not work correctly.

  After installation from the folder videos and restarted the laptop. There is a sign next to the 'ATI Mobility Radeon HD 3400 Series' in Device Manager

  Under device status, I see the following error message

  "This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

  Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available. »

  Has anyone seen this error? I tried to reinstall the driver again, but that does not solve the problem. Actually, the PowerManager now has trouble switching graphics, with the balloon message "system cannot activate graphics high-performance" close all 3D applications or video and disconnect the external screens. " Switch graphics processors. »

  Any suggestions on how to fix this?

  The model is 2764-CTO

  Just figured it out. This feature requires Vista SP1. Since my Vista disk is the original disc of RTM without SP1, this is why I came across this problem.

• After the graphics card, codecs and effects CS5 Ram

  Hi im using CS5 AF with all latest updates. I have a few questions

  I have problem with codecs included in CS5. Please could someone tell me why when I try to "make that" and I tried every possible codec included in cs5 AF output is rubbish as hell. I've been Googling etc reading some forums Adobe, some people say use 32 bits instead 8-bit, else say use this codec rather than some say perhaps maybe hmmm maybe... /... Let me think ahhh this codec is not supported in cs5 AF but it will be in a next version 2025.

  Please could someone tell me what codec should I use to make output look like sh * t rather crappy video standard?

  Saw no problem when I save on my overview of the Office of the ram, it use auto AVI WRAW (1 gb/min) and the video look great im satisfied with the excellent work of RAM.

  When I checked add display codecs in avi, wraw is not included, so I can't use it, but why the hell ram preview use this codec?

  When I use QuickTime mpeg avi codecs etc. included in cs5 the output looks like I don't know even how to describe a very bad image. I tried also to encode the shi * media encoder y output hollow tried h264 etc tried to use other third-party software to correct the bad AF and nothing is helping and im tired. !!!

  How can you sell something Adobe crapp, who does not?

  where is WRAW?

  should which codec I use to make my good 2 min clip look?

  Another thing I thing AF called media encoder please someone could tell me why the hell I can't encode AVI film in it? can get FLV or MPEG etc.?

  the result after that Kiss FLV avi or mpeag etc, is that sound disappear without doubt everyone in Adobe knowledge. could you please sort?

  Why when I use free encoding software such as mediacoder etc. without problem with AVI decoding encoding etc.?

  
  Another Question, I have 4 x ATI HD4850 installed so I would just use it? Why? because everyone on Earth knows that normally graphics cards are designed for graphics... not when you use Adobe products. Adobe preffer to people to buy 280 GB of ram and 20 hearts x Q9000.

  Why the f * K open GL After Effects does not work? just don't ask me what opengl worm can I! When I use open gl rendering is slower with Gpu than the CPU using why which? Why isn't it in MAYA? etc.

  Buy product interpersonal hope it works well? not install then install all the plugins, you need, then try try and try to operate the AF. Long AF me Linux use it still sometimes, when you install ubuntu you need a little time to make your graphics work sound etc many of your devices usually never work because they are not taken in charge not driver or buggy drivers. the thing about linux is that it is free.

  
  Adobe cost money, so people expect it to work I don't have time to wait or try to make it work for the next 5 years!

  Glad you feel better now.

  Did not notice any apologies to Adobe if...

• Big problem after the extend of editing in the browser? When the corrected mistakes?

  Since the French in new - browser edition lie in recent weeks are huge problems for the pages on external servers, IE outside of the Server Business Catalyst. The software is more stable. If you go to Google, Firefox or Safari. Fails and the data cannot be loaded.
  When errors are corrected?

  Hi Werner. We (the engineering team) found the cause of the problem and are working on a fix as I type. There is a problem with how we detect modifiable, blocks of text online (inside a block of text that is attached to the block or group) which causes a pretty bad fall.

  It may take a few days to test and deploy. As soon as it is fixed, we will update this thread with your client's file. Thank you for your patience.

• Problems with the graphics card on Satellite Pro M10

  Hi, this is my first post on the forum. I'm not a pro with computers or anything... the problem I have with my laptop is similar to the one in this thread:

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=26849&TSTART=0

  I spent half the day trying to figure out if my graphics card is broken, but since I'm a newbie with this stuff, I'm still not sure. :(

  This is what makes my M10. I'm trying to describe the symptoms that detailed as possible, but I'm German, so please excuse my lack of words in some places.

  1. when I turn it on, the laptop goes through the BIOS and give me scrambled BACK-screens and a slightly Warped windows loading bar. There is the consistency check, marked by black bars connecting the top of the screen down. After the audit, the screen goes black and nothing happens, or the screen of will just show me consistency check, do nothing. Be that as it may, I have to turn off the power (I think) and restart the laptop.

  2. sometimes the laptop goes through the BIOS checking & conistency with a few graphical shortcomings. The office is anything but shredded when he gets to the screen of the Windows user. The static method is if serious I don't even know where is the button turn off.

  3. sometimes Notepad starts very well, with the only graphic problem being the windows loading bar. When I go into Windows, the laptop pulls me a blue screen and stops immediately.

  4. sometimes, the laptop works fine for about an hour or two. After I rebooted, I have the same problems listed above, once again.

  5. If I open Device Manager and disable the graphics card, the laptop works very well. I have to lower the screen resolution and colors, but I can watch videos on youtube and everything. Finally, the laptop gets very hot on the bottom and the screen goes crazy again, so I turn the damn thing off.

  I don't know what that means! If my graphics card is broken, the screen should be all static, ALL the time? Not just sometimes more,... could sometimes less be some sort of communication problem between the graphics card and cpu? Please help me with this!

  Another thing I'm not sure about, even after reading the thread I linked above - can I replace the graphics card or not? Everyone said something different in the other thread...

  see you soon,
  Cozmo

  Edit: maybe I will add when I got the screen scrambled and everything. I installed Civilization 4, just to check if my satellite pro can handle, and everything went well for a while. The screen then haywire and I rebuilt my whole system, but display problems did not disappear completely. They were gone for almost a month, and now they are 'back' or something.

  Hi Cozmo

  I'm not a technician but here nobody needs technical knowledge to see that there certainly is hardware problem. I also believe that this problem occurs due to the graphics card. Graphics card is part of the motherboard and it cannot be traded separately. The entire motherboard must be exchanged.

  In my opinion, you have two options: either contact the authorized service provider in your country and speak with them, what can be done, or try to get the motherboard used. If you are lucky, you can find it on eBay. I already bought several hardware components for my old Satellite P10 on eBay.

  Sorry Cozmo but I do not see any other logical solution for you.

  Good luck!

• Satellite U500 - upgrading the graphics card?

  Hello

  I am a serious player, but unfortunately the laptop I found myself with is not the best for her. ToshibaSatelite U500 with 4 GB RAM and intel Core 2 Duo 2.53 GHz. the main problem is the graphics card which is as simple as possible, and so I can't play any good games.

  I see that the graphics card is attached to the motherboard; If I change the motherboard I can get one with a powerful top of the graphics card online? Help!

  Hi okoene,

  Unfortunately, a graphics card update is not possible and there is also no other mothers available with a more powerful graphics card.

  You should check this document:
  http://APS2.toshiba-tro.de/KB0/FAQ35006D000RR01.htm

  Sorry but there is nothing you can do :(

• Receive the error "Windows Media Center Receiver Service stopped working and was closed" after the video card replaced

  I have a HP computer with Windows Vista Home Premium (32-bit) Service Pack 2.  He has a VISX PureTV tuner card and already had an NVidia GeForce 8400 graphics card.  This Setup has worked well for 2.5 years until what the graphics card died last week.  It has been replaced with an ATI Radeon HD3450 and both all Windows updates have made current.  Since that time, the TV tuner did not work.

  When you sign in to an account, it gives the error message "Windows Media Center Receiver Service stopped working and was closed".  I can use Media Center to watch the recorded video before, but if I try to watch live TV he hangs up and close Media Center.  If I try to configure the TV connection in Media Center it tells me that there is no tuner card.

  I looked at the map and see no problem and I tried it back in place.  He has the most up to date drivers (so does the new Radeon graphics btw).  I tried "Uninstall" in the Manager of devices and then put it back, but it was not good.

  "Windows Media Center Receiver Service Stopped Working and was closed" I tried all the fixes I've seen this error.

  I tried all the things I saw here and elsewhere related to this issue.  I did a "clean boot" with all non-Windows services and the disabled startup process.  He always did the same thing and gave the same mistakes.  It seems to be linked to a Windows service, and I hesitate to begin deactivation to track down.

  I ran 'sfc' in mode 'cmd' and he found no problem and none of the files to be fixed or could not fix.

  In the list of services, I changed the login for "Windows Media Center Receiver Service" to "Local System account", Local Service, Network Service and individual accounts, but no permits.

  I'm afraid I'm at the point of having to reload the Vista, but I don't know how to do this and want to avoid at all costs.  I don't have the recovery disks and software.  Is this enough?  Can I reinstall from the recovery disks without wiping everything aft of the configuratiion with which it was delivered?  I guess personal files will be OK (although I don't know this for sure), but I'm afraid I'll have to reinstall other applications, my family has developed over time and perhaps lose the media protected by DRM licenses.

  Someone has encountered anything like this or have any suggestions?

  Well, I finally stumbled into the solution.  It was caused by a conflict with another application.

  A few weeks before the card failure I had installed a program called video capture Replay Video Capture that I had bought a few months ago and never used.  However, at this time where everything including the TV tuner and Media Center worked well that's why I associate the problem with this software.  The problem comes after the system is rebooted the first time after installation.  In my case, it has not been rebooted until a few weeks later as part of the recovery of the fault of the graphics card.  Suddenly, the TV tuner did not work and I get the error messages mentioned in this title of the thread.

  I was at the end of my rope with this and was just to clean your system to do a reformat and reinstallation.  I uninstalled the Replay Videa Capture program to move it to another computer, and when you restart the computer I noticed that the error message disappeared.  Of course I went to the Media Center and could set up my TV tuner card and watch television.

  Looking for some info on this conflict, I found the following. (http://forum.applian.com//showthread.php?847-Conflicts-between-RVC-and-XP-Media-Center-OS&s=c0aec9897b51d550c47b919e73e59bfc)  It is difficult to say who is at fault in the present.  I'm sure that Microsoft accuses Applian for the encoder to mpeg (mcm2ve.ax) used in Replay Video Capture, while Applian says that the problem is a Windows process (ehrec.exe) that works all the time, hogging the tuner on the system device.  According to Applian other products similar to theirs have this conflict as well due to the process of Windows.

  Fortunately, there is a solution in this case.  Applian has released a new version of Replay Video Capture (version 4.2) that uses a different mpeg encoder and eliminates the problem.  Given the surprising lack of info about it on the Microsoft Web site, I wonder how many other people with this unresolved issue dealing with the same thing as me.  If you're like me and you don't usually need to reboot your PC for a few weeks at a time, you may never know to associate the problem with the application.  What a waste countless hours trying to diagnose, and most disconcerting, that's what I was about to go through a reformat and reinstall because of this.

  Thought I'd post here my problem resolution in the hope that it might help someone else.

• Main problems to upgrade the graphics card in my Mac Pro in 2006.

  I am trying to upgrade the graphics card OEM in my Mac Pro 2006 to a Radeon HD 4870 1 GB graphics card.  I have big problems.  The previous owner recommended that my BONES 10.7.5 uninstalling and reinstalling.  I don't know how to do this.  The Apple website was no help with this issue.  The previous owner gave me a lot of procedures I've ever done before, including removing and re-creation of my RAM and using a Kext troubleshooting application.  Any suggestions you can offer would be greatly appreciated.

  a 4870 with 1 GB of VRAM is not a real Mac card (who had only 512 MB of VRAM). Unlikely to show an image until the login screen, if ever. Unless the seller has a 100% guaranteed working procedure to get this working, I recommend you return for a refund - it is not likely to work in your Mac.

  A true 5770 Mac or 5870 is the best approach for a 2006 or 2007 Mac Pro, because they are known to work with everything except movies under copyright, and your Mac is stuck in the 32-bit kernel and pre - 10.7.5 MacOS.

• HP Pavilion g series: problem with correction of the graphics card Administration says computer not connected, but it is

  PC questions message says: problem with SMA-Display adapt ATI Rodeon graphics cards.

  Click fix, it can not download the probable cause of the fix is pc is not connected to the internet, but I am.

  How can I fix this I don't know what to download

  HI @sami_3,

  Thank you for your inquiry.

  I understand that you receive a message saying: "there was a problem with the AMD-Display Adapter-ATI Radeon Graphics Cards. When you click on repair that you get a message that you are not connected to the Internet, but you are.

  I'd be happy to look for updates, but would need you know your exact model of the G Series notebook.  How can I find my model number or product number?

  You could try the HP Support Assistant to help acquire the right drivers running.  You could also test the graphic cards by running a hardware test on them. HP Notebook PC - hardware failures (Windows 7, Vista) screening. You will find the option for video under components.

  Please send the results of the troubleshooting.

  Please let me know if that solves the problem by marking this post as 'Accept as Solution'. "To simply say thank you, click on the" ""Thumbs up " below!   If you need more assistance let me know and I will gladly do everything I can to help.

• Problems with the Precision M4400 and the graphic card Nvidia quadro 770M

  I have a problem with my Precision M4400 and Nvidia Quadro 770 M. After I installed Windows 7 64 bit, I have problems with the graphics card. I get a blue screen or graphic errors. I tried several versions of the driver. In the Nvidia forum had this problem even more. Here, they told me that only a BIOS update for the graphics card to solve the problem. Update the BIOS, but I should refer by DELL. So my question is this problem with Dell is also known, and there is already an update of the BIOS to the Quadro 770 M?

  Hi all

  I have the solution by chance. I was looking for the latest drivers GeForce for Windows 7 x 64 and I read the accompanying note: http://fr.download.nvidia.com/Windows/337.88/337.88-win8-win7-notebook-release-notes.pdf
  On page 17, you can read the following note to fix: "[GeForce FX 770 M] [portable]: blocking of the blue screen occurs after Windows starts."
  
  Of course, GeForce FX 770 M does not exist (and never was), and it should be Quadro FX 770 M. I can bet that nVidia has corrected this famous BSOD problem in the wrong driver because always there is nothing about any "Quadro FX 770 M - fix" in the note accompanying the latest Quadro (340.52) driver.

  You try the GeForce driver above, but to install it, you may need to download an INF file modified with the addition of the ID of Quadro FX 770 M (= "NVIDIA_DEV.065C ="NVIDIA Quadro FX 770 M"). Try without the first modified INF file because the Quadro FX 770 M is listed as a compatible chip in the version of the driver GeForce 337.88 note...

  I'll try that, even though I am completely sastified with the latest driver for Quadro (feasible) (285.62) without disable Powermizer. I did not try the latest Quadro drivers again (to be honest).

  Late me know please.

• Error "this graphics driver is not compatible with this version of windows" when you try to install the graphics card

  Title: windows 7 Enterprise 64-bit

  I have hp Pavilion dv6 2138 ca for computer pc laptop and intel hd graphics and nvidia grahics on my windows 7 Home premium 64-bit, but after I've upgraded to windows 7 Enterprise and try to install the graphics driver nvidia. It is said

  the NVIDIA Setup program cannot continue and this graphics driver is not compatible with this version of windows.

  while I chose the latest graphics driver from the hp Web site.

  kindly tell me, that means the sentence above means and what programs and features must be changed in windows? or what steps should be taken to install nvidia graphics?

  answer me

  Thank you

  Hi Hamdullah,
   
  Welcome to the Microsoft community.
   
  "I understand from the description of the issue, you do not know the error' Nvidia graphics drivers are not compatible" when you try to install the drivers. I will definitely help you with this problem.
   
  (1) what is the model of the graphics card are you using?
   
  Method 1: If the NVIDIA GeForce GT 320 M graphics driver, I suggest you to download the Nvidia graphics drivers from the link and check if it helps.
  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-100095-3&cc=us&DLC=en&LC=en&OS=4063&product=4125893&sw_lang =
   
  Method 2: If the problem persists, I suggest to select the graphics driver and check if you have any driver update available.
  http://www.nvidia.com/download/index.aspx?lang=en-us
   
  I hope it helps. If you have problems in the future, please let us know. We will be happy to help you.

• No video after having replaced the graphics card and power supply

  I have a desktop HP Pavilion m9515y PC. The graphics card that came with it (NVidia GeForce 9600 GS, 768 MB) did not suit the minimum specification required by a game that I played. Things in the game has been very slow - I could see a delay of s ~0.5 to move my mouse on the splash screen for the game.

  Today, I bought a new graphics (NVidia Geforce GTX 550Ti, 1 GB) card and a Corsair 700W PSU to replace the 350W one that came with the system.

  From the outset that I messed up something. It's been a while since I opened the box and I thought wrongly that the top panel (with the rubber surface) to come off before the side panel could be deleted. I removed the two screws now the top panel in place and slipped it in the process it disconnect and two thin black wires which I do not know the function. It was attached near the power button and one was attached to the rear of the Panel. The sons have stripped the ends rather than a connector of some sort and I don't know how they connect back or if they are the cause of the problem that I see now.

  In any case, I advanced and removed the old PSU and video card and replace them with the new. Two of them are significantly larger than the components, they replaced, but they managed to adapt with some maneuvers. All cards are well-placed in the PCI slots.

  The power is connected hard disk, DVD drive, the motherboard and the new video card. I'm not aware of any other connections that need to be made to food. There was not much clearance between the power supply and the back of the DVD player, but I was able to get the data and clinging to the DVD of power cables.

  After having done all that, I hooked my monitor DVI cable, plugged in the power cable and turned on the power. When I plug it in, the power button on the top of the tower is illuminated and the power seems to work. However, my monitor indicates that there is no video signal. I tried to put the old return video card, but I don't always have a video signal. Because I can't get a video signal, I can't tell if the PC is start or not.

  Does anyone know the purpose of the wires that were connected to the top of the Tower?

  They would cause they cause this problem if they are not correctly connected?
  Any suggestions for the possible causes of the absence of a signal from a video card?

  I just took the PC to a repair shop and it turns out that the problem was quite simple: I don't have the PCU power cable 4 pins hanging. Everything seems to start fine when we hung out at the shop. Fortunately, the place that I took did not even charge me what as they don't charge co-pays and since it is such a simple fix.

  Now I feel kind of stupid, but I know better next time...

• Satellite P30 - error code 43 on the graphics card in Device Manager

  Windows Vista Professional Edition loaded as my new OS for the studies and course work. Now my display driver no longer works correctly.

  Device Manager displays the following message on the graphics card ATI Mobility Radeon 9600/9700: 'Windows has stopped this device because it has reported problems. (Code 43) »

  Have search everywhere on the web for solutions but limited knowledge prevents me to get a positive result. There must be someone out there who can help...

  Hi BigPappaDom,

  In my opinion to get rid of this, you need to reinstall the display driver. I have checked the site of Toshiba Satellite P30 is no Vista driver available. This means that you must find yourself to get all the drivers. :(

  I searched a bit and you should try to install the Satellite P200D display driver. She also equipped graphics card ATI and this driver must be compatible with your other oldest:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers
  Laptop > Satellite > Satellite P Series > Satellite P200D > display driver

  Check this box!

• Satellite L30: Cannot watch DVDs - error between the decoder and the graphics card.

  I'm watching DVDs on my satellite L30, but also good Windows media player and the application of Toshiba, will not let me.
  He said that there is an error between the decoder and the graphics card.

  I checked and I'm set for region 2 and windows says I have the right drivers for the dvd and the graphics.

  Any help would be appreciated with gratitude

  Hello

  Try it please with the K-lite codec pack. Download and install it. Maybe it helps.