BING maps look a real time?

Similar Questions

• in what real-time means exactly

  Hello, I am tracking esx performance cpu and memory and I do not understand the parameter in real time

  with ESX 3.5 / 2.5 VC / 1 VI toolkit

  I understand this capture in real time the performance of the ESX and not the database

  But why are they differences between two values

  examples

  *

  * get-stat -entity $esx in real-time - -stat cpu.usage.average = 6.49

  * v

  Get-stat -entity $esx -stat cpu.usage.average = 16.3

  Looks like that takes the value of the processor 0 and without real takes the average among all the cpu in real-time

  * get-stat -entity $esx in real-time - -stat mem.usage.average = 36.2

  * v

  Get-stat -entity $esx -stat mem.usage.average = 30.4

  Looks like real time takes 6% more thant without what is this 6% for memory?

  Thanks for help

  Daniel

  *

  Yes, you should go to VITK v1.5.

  The property of the Instance is introduced in this version.

• Realtek AC97 Audio Driver works on my map its microsoft? (under vista and need some sort of broad legalization of real-time system)

  Vista and the need for a kind of wide equalization system in real time for audio... and this driver seems to provide what I need... but will it work on my microsoft Driver card hd audio?  If it is not possible, then what program could I use for an equalizer?

  Hello

  What is the model number of your sound card?

  The drivers are specific to a device.  RealTek drivers don't work for its Microsoft Map, you must install the correct driver for your device package works very well.

  For more information about the driver, see the links below

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

   

  Update drivers: recommended links
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-drivers-recommended-links

   

  Equalizer you can see link below, also look on the internet for software that can help you in this task.

  Change bass, stereo, and other audio effects in Windows Media Player

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-bass-stereo-and-other-audio-effects-in-Windows-Media-Player

  Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

• Look at a FPS in real time of the events of several IPS devices

  What is the best strategy for the display of the IPS in real-time of the events of several IPS devices now that VMS filed end of LIFE?

  There was a nice view unique of all IPS events from all IPS devices run in VMS and I was wondering where I can tell people to receive the same information on their networks. I do not see in CSM and I do not think that they will find in MARCH. Please notify and correct me if I'm wrong. Thank you!

  You can use VEI. It is an observer of events that has a dashboard in real time also. You can import several sensors inside and view the events in real time.

  Link to VEI to 5.x versions:

  http://www.Cisco.com/cgi-bin/tablebuild.pl/IPS-EV

  Link to VEI to versions 4.x:

  http://www.Cisco.com/cgi-bin/tablebuild.pl/IDs-EV

  Kind regards

  Maryse.

• Pls Help: My Bing Map update 'doesn't;" How can I configure HP (Bing) card as default map application?

  Pls Help: My Bing Map update 'doesn't;"the Pre suppose several times I start Googlemap & displays the link informing me that I need to upgrade to HP map (Bing Maps).  When I try the download & upgrade, I can launch the application directly from the upgrade page.  But any other method to launch the card application sends me to the 'google-> Bing upgrade screen' again and will only start after re - download the app & reinstall. The next time I start the application... it fails again.

  Looking at the Device Info app, it seems that the upgrade script fails to update the list of the built-in Google maps v3.1.32 cards HP apps.  When you try to list the applications in the device information, it still shows Google Maps v3.1.32 rather than HP cards.  HP cards... is not see the same list of applications at all.

  How can I get the upgrade to ' hold?

  Note about this pre: is this pre running WebOS 1.4.5 / Sprint 2.5.   He was previously wiped out, which he put back in its original state.  Now I can't the cards to run right.  Any idea y?

  So, I have my answer.  And for ten to twelve people who are still on the Palm Pre and attempt to provide a new phone, I will set out the details here.

  For Bing Maps to stick, you need to use WebOS Doctor, assumming that at one point, you downloaded the Updater of Bing Maps app.

  I was having problems is because the process of provision of sw of cards which is taken in charge through the catalog app does not set the palm pre to replace the existing Google Map application correctly.  To do this, Palm (or HP) had used ANOTHER application called "Maps Updater."  It was that when you got the error of googlemap prompting you to upgrade, it you linked to a Web site that would allow you to supply the Bing Map app WITH this update of map app.  Now, something has changed, and what you get is a Bing map application installation.  Map update application is one that removes the references to the Google Map of default and directs to the cards instead.  Download Maps of the catalogue is NOT synonymous with downloaded Maps Updater application.  Once I run WebOS Doctor, and connected to my profile of webOS, he proceeds to download aaaaaall the apps I had already downloaded, and at that time there he downloaded and installed the backup app Maps Updater, which took place and restarted my phone and my camera set up correctly.

  Finally!

• Debugging on a real-time target - deployment issues

  Dear community,

  After RT my 9651 sbRIO module wiring code, I do tests to check the intended functionality. For this I start my main VI who deploys the code on my SoM and I can happily move forward with my debugging session.

  Sometimes, however, while in the process of deployment, I get an error saying:

  [VI - name] .vi loaded with errors on the target and was closed

  When I open the VI it has no errors and the VI should work a fine might think.

  My solution was so far of the VI, just open move the wires and terminals round, re - save the VI and this is the deployment works.

  This trick worked for a while, because deployment error ca occur arbitrarily on different VI making debugging quite cumbersome.

  I then went ahead and just run the wrong VI in RT mode by moving terminals and structures around to get the VI runs in mode debugging, but it is very time consuming.

  Given that 3 people working on this project and we use git-subversioning I also do not want to "touch" each time just screws for the debugging session will without actually modifying the feature.

  Has anyone encountered a similar experience or perhaps found a magical setting to avoid this subject a lot of time?

  Hello

  If solutions already present Spex does not do the trick for you, clearing the cache of the compiled object can help.

  For more information, take a look at the following link:

  Why my screws are loaded with errors when it is deployed at my target in real time? -National Instruments
  http://digital.NI.com/public.nsf/allkb/7F6502FF0560FA9086257EB3005B13BA

  Concerning

  Alex

• delete the host controller real time program

  using NI9642 sbrio host in the sbrio real-time like a startup program now when I use the fttp: to remove the previous host program I can't remove it especially when I remove the version of the host of the project, I'm looking for a way to delete the file and work with the new real-time application program that I use it now.

  Hi AlaaShaw,

  Have you tried to cancel the deployment of the executable to the target and then deploy the new application?

• block size / real-time

  Hello

  I know that some of you have already had this kind of problem, and I tried to solve the mine with your solutions, but it work yet... My problem is the following: I have to stop acquisition with a global variable of pre-definied. At the beginning of the program to choose the acquisition (in second) time, thanks to the action module. Then begins as and when the program notice a variation of the input (defined), he begins to write values to a folder and save the data.

  After the relay module, I put a module based on the time and choose "measurement in second time. The statistical module take the max and min and then do a subtraction (max - min) to get the real acquisition time (which begins with the combi-relaxation). I use the formula In (0) > global variable (pre-definied) and then an action that stops the measurement when the variable global (acquisition time) is more than.

  I want to have 2 seconds of time of acquisition, but the routine often stops around s 2.047, but is not specific enough (with the size (512) to block automatically to 1000 Hz)... So, I tried to change the basics of time for block size = 1 and sample rate = 1000 (for all: driver, dasylab and acquisition card). But now the acquisition time doesn't seem to match with the real time...!

  For more information, I use:

  USB 1608G (MCC - DRV)

  DASYLab 12 (evaluation version).

  If you have an idea of what I need to do... An accuracy of 1 ms would be great (as a block size of 1 with sampling frequency of 1000 Hz...)

  I joined the worsheeet below for a better understanding.

  If it could be useful to others... (Fortunately ^^) I found the solution!

  I used the Basic module of time, I chose "time of day" and then, I put the module 'statistics statistical values' and I take the max, min. After that, I put an arithmetic module and "max - min".

  I hope it's ok, but it looks like the right way to find what I was looking for...

• How to copy a file in real time each 5minus from a PC to another PC via LAN network?

  Hello Labviewers,

  Is it possible can labview auto copy drop every 5 minutes from PC1 to another PC in real time?

  Say in the laboratory classroom I have PC1 labview run in real time, collecting data dump in the folder c:\test\testing.xslx

  Then in my Office PC how can copy file in PC1 every 5 minutes. Is it possible Labview is possible? Please help me IV thanks

  How about something like this?

  First map a network location to a 'reader' in Windows.

  Then just use LabVIEW primitive file copy to copy the file.

  Wait five minutes.

  Do it again.

  

  Yes, it's the bare minimum, and probably not the best way to do as you can't stop the loop with the stop button once the period has begun. But you can see it's pretty simple, if all what you need to do is to copy a file and location, you can map.

• NOR-DAQmx compatibility with the system in real time

  I try to use a time system 11 with LabVIEW Real-time. When I try to connect with the driver OR DAQmx, an error saying that the version of the NOR-DAQmx drivers are bundles with the one on the real time. I tried to use different versions of the NOR-DAQmx drivers that are available in the table of compatibility, but not those who worked. I have an old computer working with the same real-time system that uses LabVIEW 9 and has the driver NOR-DAQmx 9.3.5 f0 driver installed on it but I can't find the drivers on the web. What should I do?

  I am using LabVIEW 2015 in my current computer.

  Thanks in advance.

  Looks like you can just have a lag in the versions of software installed on your host computer and the target.  In order to deploy the code from your host to your target, the two must have corresponding to libraries of functions.  See this link for instructions on updated versions of the software on your target match those installed on your host computer, the wizard of the LabVIEW RT software.  If you have already done this, and it did not help, please provide a screenshot or error code of the message that is to appear.

• Starting process in real time

  I have 2 questions related to LabVIEW Real-time. I'm using LabVIEW 2010 Service Pack 1. We have a PXI-8186 controller running the embedded real-time.

  (1) I have my software written to communicate using TCP/IP. The real time software runs the listener 'TCP create' then the 'wait on TCP listener"to look for the connections of the computer. This works well in the LabVIEW project. I then build the executable and deploy it in the system in real time, set up to run during startup. I put the target name to be my program name "Test program.rtexe" rather than "startup.rtexe". I don't know if that makes a difference. I saw the other files in the startup folder of the system in real time that have been named something else. My questions are: the name possible no matter what name we want and the system in real time all programs contained in the startup folder is running or is there another method to specify the programs to be executed?

  (2) is there a way to monitor or to see what programs are running on the system in real time? As the the Task Manager on a windows system. The reason I ask, is that after I restart the PXI system and without using the program of project, I can't connect to my test program running on the system in real time. I don't know if the software is running on the system in real time, is it established that the network interface which it was assumed, etc. to determine why I can not connect with him. Any help on various methods to determine if the software actually runs would be useful.

  Thanks for any help you can give.

  Bill

  Finally found the problem.

  It would seem that, at least in the 2 controllers shipped we have there, controllers have a flag in the BIOS that allows you to disable the file to begin execution on the system in real time. Once I put the flag on the 'NO', everything works. The flag is named:

  'Disable the boot VI' tab 'LabVIEW RT"in the BIOS.

  It is a good option if the boot VI is damaged or was not debugged prior to deployment.

• monitor thread on the system in real time

  I have a SMU-8101 controller in my PXI system. I have it running with a system of operating in real time. I inherited some software WHICH has been used on a program of LabWindows used on a PC with a Windows 7 operating system. The SOFTWARE seems to work OK. My problem is when I leave the program I get an ERROR of EXECUTION NOT DEADLY

  "

  Source position thread ID unknown 0x000000EC

  Your CVI program ended on the target in real time. However, there still on the target in real time, the threads that are running or have already run the CVI code.

  Please check that your application cleans all its threads. Son left running after that your application can crash the target in real time when your application is unloaded.

  "

  As I said I got the code and there is a lot of it. I am looking for a smart way to track down these threads. I was wondering if there are tools available that could help with this? Or any other suggestions on how to run these lines down?

  Hi DPearce,

  This article knowledge base has some information on why CmtDiscardThreadPool causes your program hang and gives some recommendations for fixing it.

• Why is-Web application server on a target at a distance in real time is not start?

  Hi, I need help urgent please

  I was wondering why the Web application server on a target at a distance in real time is not start?

  The target is 9014 real-time and its connected to a local network abroad, I have a public IP address port forwarded to the local IP address of the device (Network Address Translation) with all open TCP/UDP ports. I can log on remotely over the internet using the public IP address to the device configuration page and change many settings. Whenever I have activate the Server Web applications and made port 8080, worth defaults to 0 after the reboot of the target.

  The admin login I use has all permissions to control the unit.

  For this reason, I have a problem, deploy web services remotely through the project after building it as it happens with the following error.

  "Web Services deployment failed. You must start the application Web server OR before you deploy a web service.

   

  I have attached a few screenshots

   

  Thanks for the help

  I had someone to plug his laptop to the same network as the cRIO, logmein used to connect remotely to the laptop, I had to download labview and the software needed for the cRIO in the computer, and then with the help of MAX, I reinstalled the software on the cRIO. The port of the web server application 8080 is now activated and I was able to deploy services web ok.

  I wonder why I can't use MAX distance to reinstall the software on the cRIO.

  The cRIO is installed on a private overseas network (192.x.x.x), then I have a public internet IP address (67.x.x.x) mapped to the private IP address of the cRIO (Network Address Translation). I can connect to the cRIO config page using the address 67.x.x.x, but not via MAX

  If I find target real tiem using the Ip address of 67.x.x.x, sometimes with the private static IP (192.x.x.x) located on the cRIO but it shows disconnected status

  I wonder if someone has an idea how to go about using MAX to reach the target in real time on the internet

  Thank you

• 10GBE Optical Desktop in real-time?

  Hello

  I was looking for possibly using card NIC a10gbe (dual-port of preference) for a project I'm working on that involves a standalone that will emit a lot of data to a desktop RT LabView FPGA. I tried to look through some of the models which would require a RT Office, but have not seen who could go 10gbe, gigabit only. Doesn't I may look on a model, or are there materials that could make 10gbe on a RT controller, etc.?

  Thanks for any help and if you know a card compatible 10gbe that would work with an office of RT, please let me know

  -weiz

  Hi weiz,.

  Here is an article from Developer area that lists the requirements for a PC in real-time: requirements for LabVIEW Real-time targets desktop PC.

  Under the support of the Ethernet Chipsets section it lists all chipsets ethernet you can use with different versions of LabVIEW RT. I checked those listed for LabVIEW 2009 and it seems that they are all Ethernet Gigabit controllers.  Unfortunately, LabVIEW RT support all models with 10gbe.

  Take care!

• Real-time TCP/IP communication

  Hello

  I use the following materials:

  SMU-1062 q

  SMU-8108

  OR PXI-5600 (02 card for 40 MHz of bandwidth)

  SMU-5641R (two entries are used; one for each NI PXI-5600)

  PMA-1115

  LabVIEW 2009

  I use the mode of the instrument to detect the signal to jump and write in a spreadsheet in real time.

  My question is that how can I transfer data on LAN in real-time to create a waveform in software on a remote computer before writing it to the worksheet.  I'm looking for something like the time communication real TCP/IP. I enclose my VI. Kindly guide me that how can I do this?

  Thank you and best regards,

  Rashid

  Hey Rashid,.

  Check out this tutorial with examples and let me know if it helps.