BIOS, do not read my drive 310M from nvidia gforce

Similar Questions

• Tecra S1 - Bios does not detect HARD drive

  Hi, first time poster, long drive date.

  I have a friends laptop with me an old S1, its hard drive has failed. (Even tried it on my USB adapter to diagnose).

  I had another IDE HDD which works like a dream.
  I can even install Windows up to a point with the exception of when the computer wants to do the first restart of the second phase of the installation. (Not on CD).

  In the bios the HARD drive is not detected a 0 MB for the read command.
  I tested the USB HARD drive. So works perfectly. will try another hard drive there tomorrow see what is happening.

  I tried the recovery CD aswell. But she also can not detect the hard drive.
  Finally, I even reflashed the Bios even if it was the last version 2.50.
  Still did not change.

  If I'm just at a loss here. Tomorrow I'll do the following.

  Try a 3rd HDD IDE into the machine.

  Opening of the case and see if I can find the CMOS battery to replace or remove for a minute or 2 to see what is happening.
  Is obviously a problem of bios of the HARD drive is detected. Has anyone ever encountered this before?

  Windows / ERD Commander / Partition Magic 8 all finding the end hard drive.
  Thanks for listening to my dribble that I feel like I'm banging my head against a wall being close.

  Kind regards

  Dave

  What drive did you use and what size it it?
  I think that not all HARD drive would be compatible because of the 28-bit LBA.

  The 28-bit LBA supports hard disks up to 128GB and if the IDE controller supports only 28-bit LBA then it may happen that more large drives would not be recognized by the BIOS.

• Computer does not read USB drives

  original title: USB keys

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • my new laptop does not read a USB

  What happens when you insert the USB - anything?  He make up a menu of options or give you any error messages or anything like that?

  If you go to start / computer use you see the USB it?  If so, double-click it to open it.  If this isn't the case, read on.

  Go to start / Control Panel / administrative tools / computer management / disk management and see if you can see the USB it.  It cannot be listed with a letter, but it may still appear.  If it is there, please post any information on this subject, he said EXACTLY Word for Word.  If she's not here, it is not really considered by the system.

  You have an another USB, you can try in the machine to see if she had somethiing to do with the stick rather than the PC?  You have another PC on which connect the stick to see if it works on another computer.  Have you ever used this front USB on any computer or is it new?

  You have all other USB devices connected to your system and they work well?  If this isn't the case, you have a USB mouse or other device, you can test on the computer to see if it works (if we exclude a problem with the USB ports or USB drivers).

  To be honest, as it is a new computer, I would contact the technical assistance service and to ask for help they should be happy to offer because it is a new computer from the computer.  They may be able to help more of us because they know that their systems better than we do (and I don't even know the manufacturer of your computer, the USB key, or almost anything).  In some cases, to play with the system without contacting them can void the warranty and you certainly don't want to do.

  I hope this helps.  If not, please answer my questions and give me the results of the procedures I asked you to try (including contact with the manufacturer) and we will see where to go from there.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows 7 and bios sees not the hard drive, but when I connect the hard drive to the USB with an adapter, I see directories and files

  Please, I need pc

  Original title: windows 7 and bios does not see the hard drive. but when I connect the hard drive to the USB with an adapter, I see directories and files... Ive a hp Pavilion, what to do?

  Check the BIOS for hard drive setting.

  Make sure that you do not connect the drive to a SATA/RAID port.

  Old IDE drives - check the jumper on the drive (use "Cable Select" as a starting point), the BIOS must also be set in legacy/compatibility/IDE mode. Note: If you currently use the AHCI mode, then switch to IDE mode may cause Windows to boot.

  J W Stuart: http://www.pagestart.com

• I & I can not install recommended driver downloaded from Brotherr

  I have the new computer with Windows 7, my brother fax printer appears as unknown device & I can't install the recommended driver downloaded from brother.  Have you tried the different usb ports.  It seems that the driver has installed, but comouter don't recosgnise printer. Any suggestions please. ?

  Remove the unknown device Windows 7

  Unplug the printer

  Start the Brother driver installation process

  Connect the printer requires the installation process.

  Windows has trouble changing the printer driver if the printer is already connected as an "unknown" device

• Lightroom do not read and download photos from my camera - help please?

  I have Lightroom and have used successfully for about 9 months with my Nikon D800

  I recently bought a Nikon D500 as a return to the top of body.

  When you try to download my first photos on the D500, Lightroom would not read them. I searched and found an update of the software. After update, Lightroom read and downloaded pictures of the D500.

  Now, Lightroom will not read or download new photos taken on the original D800!

  I have searched for new updates to the Lightroom software but tells me that my sorter is up-to-date.

  Help please!

  Hi andrewd,.

  What version of Lightroom do you use?

  Display the exact error message you get when importing.

  D500 requires Lightroom 6.5/CC 2015.5. Cameras supported by Adobe Camera Raw

  Kind regards

  Assani

• 15 - f039wm: BIOS does not detect hard drives until it performs a diagnostic search

  I was handed a 15-f039wm laptop to watch and I recognized immediately the hard drive was bad, complete failure - no detection and would not pass the built-in diagnostics. I have removed the drive from the laptop and confirmed that the car was bad on a separate system. I ordered a new drive, went with an SSD and put the new drive of the laptop. I checked the cable was sitting correctly on both ends and for good measure he reinstalled on the motherboard as well as on the drive itself.

  Then I tried to re - install Windows 8.1 with the laptop provided with Bing, but when it came time to select the hard disk in the Windows Installer screen, no disks have been detected. I tried to load the drivers for the drive recognized, but nothing has worked. I then tried to start other diskettes of Windows (7 & 10) and the same problem arose, no drive detected. For fun, I loaded Hiren's Boot Disk and tried to see what I could do, and oddly enough the drive detected several times.

  Then, I decided to go back to the integrated diagnostic tools (F2 at startup) and see what would happen. Hard drive has been detected and passed the Quick Test. I have a Windows install CD in and after that I left the screen he ended up launching the installation disc. I decided to try just a new set of drivers to see if the disc could be detected, but that the disc was already detected and just sitting there, ready for the installation of the software.

  I have installed 8.1 on it and did the upgrade of Windows 10 to the owner and I noticed something serious.  Whenever I restarted (key here being a full reboot), the drive was not detected and I would get an error in DEVICE of START-UP INACCESSIBLE when he tried to load Windows. I ended up to play with the drive and launch the troubleshooting menus command prompt.

  I tried to run diskpart, and when I typed "list disk" inside diskpart and he told me that there are no drives found. Large.

  I took once more apart from the laptop and reinstall the drive again and the same problem happens again. This is where it gets a little weird. I ran Diagnostics on the hard drive again and just canceled check out out and Quick Test and let it boot. It starts very well.

  I thought so at this stage it is a bug in the BIOS or something and decided to flash F.25 Rev.A to see if that would help. No, the problem persists after BIOS update flash. I decided to just go ahead and order a new cable to see if the cable is the issue. Is there anything else I can try? Anyone have this problem, it is rather strange to me, and I saw a lot of machines to act strangely.

  So, to summarize:

  Hard drive is not detected at least that I force diagnostic analysis of any type on the hard drive and come out and let it boot.

  What I tried:

  New hard drive

  Reconnect the hard drive

  BIOS settings - boot order, security keys allowed Secure Boot on / off, Legacy Boot on / off, (there no option of detection or ahci in the BIOS).

   

  Many windows install environments, non-windows - disk environments is ever detected by the BIOS, I guess

   

  Flashed the BIOS updated

  Reinstall Windows (back to 8.1 with Bing and question persists, persists on Windows 10 institutions)

   

  DiskPart on Windows Installer (shift + f10 - prompt "diskpart" command, then in diskpart: 'list disk' which wouldn't say no disk).

   

  Ordered a new cable (pending on this one)

  What gets me, is that it works whenever I have diagnostic scan before starting. Every time. It fails on a restart cold without doing so. I looked on the Board for the damage of physical strength and the liquid, but do not see anything to really. I'm guessing that it was abandoned. Any ideas on what else to try? I'm running out of ideas on this one.

  Try the new cable, but I think you look a very bad mother board it.

• Windows Vista will not read external drives

  I had an external hard drive connected to my computer earlier today. All of a sudden, my computer froze and started to make noises beeps, then I stopped and released my external drive.  Now, whenever I plug a drive it tells me that I have to reformat. However when I try to reformat the drive, he told me that the format could not be completed. It allows me to format NTFS, but that does nothing for me. I need to format in FAT or FAT32, but it won't let me. I even reformatted my drive to FAT32 from another computer, but when I plug in Vista it still says it needs to be formatted.  I got lost. How can I get Vista to re-read my external drives?

  Hello

  Run the diagnostic tool for Microsoft Fixit.

  Hardware devices not detected or does not:
  http://support.Microsoft.com/GP/hardware_device_problems

  See also: http://windows.microsoft.com/en-US/windows-vista/Formatting-disks-and-drives

• nothing do not read CD driver

  I called tech support once and they were overshadowed on my computer and fixedit, they said that I disabled it somrthing, but as soon as I turned off my computer it happens again.  I don't know what I disabled to fix it again.

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Help please! Do not read/write drive :(

  Hello!!

  My CD? DVD player doesn't read or CD burning Device Manager displays "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) ». I have tried uninstall and put it back in place, as well as the Sony firmware update. I also tried to remove the filters, but there are no filters listed on on it.

  Any suggestions?

  
  

  Hello

  19 code means there is a driver conflict such as two devices attempt to use the same resources.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• BIOS does not see the drive

  I have a laptop Inspiron 6400 which continually blue screens with Memory_management stop code 1.  I am able to boot from a Linux CD without problem.  The Dell diagnostics are all successful except the one HARD drive.  The BIOS executes engines a A015 and A017 is later, but I'm not able to start long enough to install it.

  The old HDD shows SMART errors when loading on another PC so I cloned it on a new disc.  Both are Hitachi 5400, the old model a 120 GB the new 250GB.

  How can I get the BIOS to see the drive?  I have restored the image of the old drive to the new, with a signature of disk and without.  Dell support application there is no locking BIOS goes on and any SATA drive will do.

  Thank you.

  Due to the presence of a Media Direct partition on the original disc, you can't clone the entire disk.  For the reason and how to work around it, see below.

  www.goodells.net/.../hPa-issues.shtml

• My TV does not read HARD drive Toshiba 3.0

  I ask excuseme for my English! I'm Italian...

  I have a drive hard toshiba 3.0,.
  My samsung TV to the beginning to 'read' my hard drive, but then the TV does not recognize and I so format, losing my saved videos!

  What is the problem?

  Maybe you should check the user manual s TV for more information on the format of file or the support of hard drives.
  I know in many cases, the hard drives or flash memory sticks must be formatted using TV to get the file format supported special that can be read by the TV.
  I think it's kind of right to privacy with the movies recorded could not be edited on computer.

• Satellite L40 - 15G - BIOS does not recognize DVD drive

  Hello, I have a L40 - 15 g doesn t seem to show the driver on the BIOS.
  Tried a pioneer dvr-k17tbt (original)?
  a GSA - T40N H - L
  a Sony DW-P50A
  No shows on BIOS.

  I've reset CMOS, BIOS update, nothing works
  All readers Don t show on windows as well, but they have the power (light and work button)
  What should do?

  Hey Buddy,

  What is the original drive and where you have ordered the new CD/DVD readers?
  Have you checked if there is a jumper for master/slave definition? If so try with the master and slave.

  The problem is that not all readers are compatible for all laptops. If you don't know which drive is just ask a maintainer approved assistance.

• BIOS does not recognize my drive hard new Solid (SSD)

  My computer is a Satellite Pro A60 PSA65E.
  I want to replace the failed hard drive with an SSD of 128Gbytes.
  I think that the hard disk controller is unable to accommodate higher capacity, but how do I get at least the bios to see the drive at all?
  The bios is ver 1.9 released on 04/03/2005.
  Thank you
  Gaston

  Posted by gastong
  

  My computer is a Satellite Pro A60 PSA65E.
  I want to replace the failed hard drive with an SSD of 128Gbytes.
  I think that the hard disk controller is unable to accommodate higher capacity, but how do I get at least the bios to see the drive at all?
  The bios is ver 1.9 released on 04/03/2005.
  Thank you
  Gaston

  For records, it works!
  In fact, bios doesn't seem to have something to do with it.
  To use with this portable ssd, first initialize and format the Solid State Drive (ssd) with windows disk management 7.
  Then install the ssd in the Satellite Pro A60 and run the two supplied with the machine Toshiba recovery disks to install windows xp.
  That works as well for the 64 GB and 128 GB ssd.
  Best regards
  Gaston Gagnon

• Pavilion P6142p - Bios does not recognize the drives.

  I have a Pavilion P6142p that won't start.  I have reset the CMOS and get into the BIOS but no disks are recognized, even though I can feel/hear the rotation of the hard drive.  It is rather a motherboard problem or a low power problem.

  Thank you

  Kelli

  kuphaus,

  This is a classic symptom of failure on the boards of m2n78 - la . Your model is on the list.

  See here, pages 1 and 2