BIOS HAS LIMITED THE OPTION... PLEASE SOLVED

I have hp 1000-1140tu... It's bios has limited option and no mode to change mode of hard disk to turn off the SATA mode as well as many other options... I insydeh2o bios flash

BIOS VERSION: f 26

AS OF: 03/02/2013

now what should I do?

I do not know.

I have only slipstreamed on a CD.

I will say this however, you should be able to boot, XP has to load all the files and it should crash at the point where the dialog box indicates "Setup starts Windows.

If you don't even get that far, something is wrong.

Install XP using your XP installation CD and use a USB FDD and install the driver Intel Series 7 in this way. It's like I always do.

Tags: Notebooks

Similar Questions

  • When I try to create a restoration political group has disabled the option.

    I have never tried to create a restore point on the computer. I assumed that this was done automatically.
    When I tried to create that told me that group policy has disabled this option.
    I have this computer again, and it was never part of a network.
    This is a private computer and I am the administrator.
    Operating system is Vista service pack 2

    Hi Jackson,

    You can check out the following link and try the steps by Mouneshwar R, Support Engineer and check if it helps.

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/system-restore-has-been-turned-off-by-group-policy/9505e5e8-37b5-440A-ad38-51a08720ac42

    Note: This link contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

    For more information about how to back up and restore the registry, see the following link:

    Back up the registry

    Hope this information is useful.

  • New driver has removed the option to print on macbook

    I have a macbook pro and have always used a photosmart 2610 for printing, however my brother, years, lost the cd it came with to install the scan driver. Recently, I was desperately need for her and managed to download it from this site. Everything works fine, however each time I have try and print whatever it is now, not only is the option "grayed" out and not clickable, but it does not say "print" it now says "send fax now".

    I looked in my preferences, but cannot find what to do, I looked through some 1000 pilots + (for models of different printers, etc.) and could not find everything to do with printing.

    Help, please

    OK, let's do this:

    -Sys Prefs, Print & Fax
    -Right (control) click inside the box that lists your printers and select Reset Printing System.
    WARNING - This will remove ALL your printers!
    -Select the sign + to add again. Search for the printer, but make sure that it is not on the side of the printer fax (he can say hello next to him), select it, and wait for the 'Add' button becomes available. Until it clicks.

  • My drop down desktop (Windows 7) has lost the option new folder.

    I can create is no longer a new folder on my desktop because the drop down menu no longer has the option listed under 'new '.

    You have installed chrome? It is an update of Chrome, (mid), is responsible. Here are two patches.

    How to remove and restore the default context Menu items 'New' in Windows 7 and Windows 8
    http://www.SevenForums.com/tutorials/28677-new-context-menu-remove-restore-default-menu-items.html

    If still no joy, see the 'response' by Linda Yan in this thread.
    http://social.technet.Microsoft.com/forums/en-us/w7itprogeneral/thread/97de8a2a-12f2-4381-A409-a78f4ae551cf/#99395761-56de-4a76-8C2A-eab498ad735a

    Tip: When you save the text in Notepad, the default file format is .txt. Replace all files.

  • Server Active Directory 2003. BIOS has caused the time change in members AD. Synchronize all closed and locked to certain services.

    A MS tech got sent here, but not sure that this is the right place to ask.

    So a client a little slow down in 2003. Yes, I know they no longer have the PDC and BDC, but I will use these terms to make it easier to explain.

    PDC still in place. Most work after changing the time of return. I would just deal with the BDC as an orphaned domain controller and remove it manually.

    If I do this, it will bring the PDC back online as a working domain controller. I'm not going to add back the BDC. PDC holds all the rolls. When I run the command repadmin /showrepl, I get the message that too much time difference between servers, so that replication has been stopped. I also noticed that anonymous log and other things have been disabled. I've seen a lot of docs on how to force replication, but I'd rather just remove the replication partner.

    Again, someone knows if this will allow the RPC server and other accounts that have been closed to limit the damage. Do you need the RPC server to clean up metadata when you remove a server manually with ntdsutil?

    Thank you, any information that would be useful is appreciated. Lyle

    This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
    *
  • error code: 0 x 80070002: MS updates__The site has encountered a problem and cannot display the page you are trying to view. The options provided below might help you solve the problem

    The website has encountered a problem and cannot display the page you are trying to view. The options provided below might help you solve the problem

    Hello

    Look in Control Panel - updates of Windows to see what is the KB and post it here. You can indeed
    There no need and do a right click on it and HIDE it. Let us know what is the update, so that we can
    help advise.

    Also, if you don't need it you can try to download it here.

    Microsoft Download Center - research on KBxxxxxx the number of update for anchor xxxxxx
    http://www.Microsoft.com/downloads/en/default.aspx

    Download - SAVE - go to the place where your put it - click on - RUN as ADMINISTRATOR

    If you need to fix the error:

    Error message when you use the Windows Update Web site or the Microsoft Update Web site to install updates: "0 x 80070002.
    http://support.Microsoft.com/kb/956698

    Windows Update Error 80070002http://windowshelp.microsoft.com/Windows/en-us/help/c5f4d9e0-3eb6-426b-8118-0cedf489a75f1033.mspx#EJH

    Or - these two (above and below must be the same)

    Windows Update Error 80070002
    http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-Error-80070002

    Fix Error 80070002 when using Windows Update in Vista
    http://www.mydigitallife.info/2007/12/21/fix-Error-80070002-when-using-Windows-Update-in-Vista/
    Error Code 0 × 80070002 during Windows Vista SP1 Setup Install - SP2 might have similar problem
    http://www.tipandtrick.NET/2008/error-code-0x80070002-during-Windows-Vista-SP1-Setup-install/

    You receive an error '0 x 80070002' or '0 x 80070003' code after you download an update from Windows Update, Microsoft Update or Windows Server Update Services
    http://support.Microsoft.com/kb/910336

    Error message when you use the Windows Update Web site or the Microsoft Update Web site to install updates: "0 x 80070002.
    http://support.Microsoft.com/kb/956698

    ----------------------------------------------------

    Then run this:

    How to reset the Windows Update components? -a Mr Fixit
    http://support.Microsoft.com/kb/971058

    Description of the system for Windows Vista, Windows Server 2008, update tool and
    for Windows 7
    http://support.Microsoft.com/kb/947821

    ------------------------------------------------------------

    If necessary, you can get free reports of incidents:

    Windows updates - free Incident report

    Go here and click on-> Windows Update fails while searching, downloading or installation of updates
    http://support.Microsoft.com/GP/wusupport#tab3

    The security updates, you can get free support Incident report
    http://www.Microsoft.com/protect/resources/support.aspx

    I hope this helps.

    Rob - bicycle - Mark Twain said it is good.

  • Error manually running Windows updates "the website has encountered a problem and cannot display the page you are trying to view. The options provided below might help you solve the problem.

    Original title - manual update of Windows XP via "Windows Update" fails

    07/01/14: click on "Windows Update" on the desktop (XP Home) and XP Tablet

    Result: 'the site has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem. »

    This office has begun on about 3 days ago and just this morning appeared on the Tablet

    I do McAfee and Microsoft updates manually every morning after the startup of computers so that they will not automatically be updated when I'm busy with other things

    I suspect that the McAfee via Verizon security package is the culprit since the 'look' of their package and procedures changed end of December

    Since then, they have had updates almost every day

    And around the same time, my problem appeared on XP Home Edition, I was not able to access Adobe PDF files and had to re-download Adobe Reader XI

    Any body else having the same problem?

    And help get the update of Windows XP to run again?

    It would not be the first step to disable automatic updates in Control Panel and manually download and install the most recent cumulative security update for internet explorer since without first, everything in the way of troubleshooting will be futile?

    Download and install the latest cumulative security for IE8 update and manually restart the computer.

    visit windows update via the shortened link in your Start menu.

    Assuming that you have Win XP SP3 and IE8, it will be the necessary file

    http://download.Microsoft.com/download/1/9/A/19A6AC47-9EA0-455F-B918-A44D25B5304C/IE8-WindowsXP-KB2898785-x86-enu.exe

  • My monitor into hibernation against my will. When I open the control panel power options, there are no options to choose from, the drop down menu has nothing. Help please

    Is it possible to restore the options in the Panel have no option of available power

    Hello Braunmab,

    Thank you for your message.  Try to get to you the options of Hibernate that way:
    Right-click on the desktop and select "Properties".
    Select the "Screen Saver" tab > click on "Power Options."
    In this window, you should see options to Hibernate / sleep.
    Please let us know if it did or did not help to solve your problem.
    See you soon

    Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

  • Satellite C660D boot - update of the BIOS has not

    Hello

    In recent days, I get a blue screen of death with the error 'whea_uncorrectable_error', I read something about the BIOS update, because the error is probably caused by the previous version of the BIOS. I gave the updated correctly, but as soon as restarting my laptop, nothing has been started.

    The fan and the keyboard work but nothing else. I tried to remove the RAM, remove the CMOS battery, pulling on the battery and holding the power button, but nothing seems to work.

    Can you please help me and tell me how to recover my BIOS?

    because the error is probably caused by the previous version of the BIOS.

    Older version of BIOS does not BSOD... cause the BSOD appeared during the last day, but I guess the laptop worked correctly in the past under the old version of BIOS... the BIOS could not the problem here...

    However, the fact is that the laptop is dead now... probably because the update process was interrupted due to the BSOD...

    From my point of few the EPROM has to be re-flashed again using BIOS crisis disk...

    Some people tried to solve this similar problem using the 3rd party crisis disk (use forum search the crisis disk to find similar topics), but it still does not...

    That's why I think that in most cases only the Toshiba ASP may be able to reflash the EMPRO using the original disk of crisis

  • Can I use Windows 7 Upgrade media to upgrade a Vista computer that has not been upgraded to service pack 1? Can I use the option of custom Setup for Windows 7 Upgrade media? I would go from Vista Home Premium to Windows 7 Premium.

    The computer on which I am trying to upgrade is vascular under Vista Premium, but it was never upgraded to Service Pack 1. He has a problem with PIECES that is caused by a defective ntdll.dll module and so the updates do not work. Windows Upgrade Advisor tells me I must update Vista SP1. I really don't want to spend the time to solve the problem of Vista. I would like to just do a clean install using the custom install option on the Win7 upgrade support.
    Help.

    Wrong forum. This post here instead, questions please: http://social.answers.microsoft.com/Forums/en-US/w7install/threads

    That being said, you can not use an upgrade to Win7 edition to make a clean installation on a computer running Vista without SP1 installed, but you can buy a complete edition of Win7 (detail) and install it after formatting your HARD drive. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • Satellite Pro A300-28V - my bluescreens disappeared when the BIOS has been upgraded

    I'm curious to know about it. The machine is a Satellite Pro A300-28V with Vista32/Win7.
    Had problems with bluescreen dumps referring to 'iaStor.sys '. I was about to send the laptop in for repair when I made this last effort to resolve the problem. Upgrade 1.9 to 2 BIOS, 1 - Win.

    All of a sudden my system image succeeded! Even at an Iomega home network HDD. Without complex!
    No blue screen exports even at startup 'cold' (after a free night)!

    For now, I leave the computer in sleep mode while I am at work. Let's see if he managed a day without landfills.

    What is the technical difference between 1.9 and 2.1 BIOS? No idea if it's something with iaStor.sys to do?

    /ssstsg

    Spelling was edited by: ssstsg

    Hi mate

    This is really good news as your BSOD displeasured after the BIOS update.
    The BIOS give instructions to the test power - on self test (POST) and provide basic information on how to manage components of the laptop, as HDD, ODD memory, that are required to load the operating system.

    Who knows, what was changed in the update but the main thing is that all the work and the update solve your BSOD

    > No idea if she has something with iaStor.sys to do?
    iaStor.sys is part of the SATA driver who is required to recognize the HARD drive using AHCI mode.

  • There is an option in the bios to set the sata drive * IDE *-mode?

    There is an option in the bios to set the sata drive * IDE *-mode?

    Grobi

    Hi dude

    That s a funny question.
    No, there is no option in the BIOS!

    Please understand that there are various interfaces to drive HARD. IDE and SATA.

    There is a big difference between the two interfaces and the function of the HARD disk on the motherboard controller, you could use a HDD IDE or SATA HDD.

    But you cannot connect a SATA HDD to IDE or IDE HDD controller for the SATA controller. This is not possible due to different hardware.
    This is not possible and that's why these BIOS settings are not available or don t exist!

    Good bye

  • Equium L20-264: can I unlock the options in the Bios to change the speed of the CPU & FSB

    Hello

    I have a toshiba equium l20-264 today and I was wondering if I can open it the options in the bios to change the cpu speed and the speed of the fsb.

    But if you don't don't do this, I already have a Dell Xps laptop Overclcoked to 4.5 ghz (twisted majorly) and I installed today a very powerful cooler and heatsink of heat inside my laptop, I'm ready to overclock bu ti do not know if I can via bios but if so could you point me to guides for a code name overclocking intel celeron m 360 : DOTHAN

    Help, please

    regards James...

    Hello

    Unfortunately, this is not possible on the laptop.

    I o year owner of 3 different computers; two laptops and a desktop PC. The BIOS on the desktop is different and allows to change and increase the CPU. But the laptops BIOS does not allow to do something similar.

    Why? Because the CPU overclocking would increase the internal temperature and make portable is not stable and perhaps that it would infringe the motherboards and CPU!
    The notebooks run with maximum efficiency. If you compare the notebooks modules with cooling Office cooling modules you will see the difference!

    Please don t waste your time and don t find any possibility to overclock the CPU and the FSB

    concerning

  • Satellite A100-756: no option in the BIOS to change the CPU usage

    Hi guys,.

    recently bought a satellite A100-756 laptop with core duo of intel clocked at 1.86 Ghz. When you look in the BIOS (version 2.00) the only options allotted to me is to dynamically the CPU frequency mode are 'always low, or dynamically switchable. There is no option to set the processor to operate at "still high". my friend who has a 2 years old satellite said that, on its model, there is the possibility to "still high".

    Toshiba HWSetup also lists only the mode options for dynamic as either «always low or dynamically switchable» cpu frequency I was wondering if anyone has done to put the option to always high, or if there is an update the Bios or software Toshiba that would allow this option for 'high alyways?

    Congratulations for all help people!

    Hello

    As you may knew that the Toshiba Power Saver tool is preinstalled on most Toshiba laptops.
    This tool allows to change the CPU, the speed of processing, cooling method, using standby and hibernation, etc.

    To change the speed of the CPU or the cooling method, you will need to enter the energy saver, then select the basic settings tab.

    PS: All these settings can be configured for a different power profiles. Therefore, you must configure the settings of the profile that you will use for most of the time.

  • CODE 66 has when the update NET FRAMEWORK 4 with WINDOWS UPDATE can't update more far until the issue is resolved. Help, please... I almost tried everything.

    Remember - this is a public forum so never post private information such as numbers of mail or telephone!

    CODE 66 has when the update NET FRAMEWORK 4 with WINDOWS UPDATE can't update more far until the issue is resolved. Help, please... I almost tried everything. Ideas:

    • You have problems with programs
    • Error messages
    • Recent changes to your computer
    • What you have already tried to solve the problem

    Take a look at this link and see if it helps-

    http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/3adefda0-69f3-4075-96ee-e2c61bd599cc>

Maybe you are looking for

  • My ID apple has been disabled

    Dear Mr./Mrs, Hello! I am writing this e-mail to inquire about the reason that my ID apple is disabled. I tried to add my credit card, but iTunes tells me that the information is not game. To resolve this problem, I always use gift cards to some peop

  • better, more narrow, more appropriate research

    Forgive me my ignorance, but there are options in a drop down menu that you could use to search better. Like-search must contain these words - should not contain these words must have these words in the title and etc... FF may not have it but some br

  • enlarging scanned images

    My wife is the construction of a photo book - I have scanned in about 30 photos of all sizes, but at 600 dpi - I then imported in my Photos app - how to enlarge them as 4 x 6 or 5 x 7 and then insert them into my book of project?

  • Printing double-sided Pages using pages

    How can I print duplex using Pages pages?  (My printer is able to offer this option, but Pages does not have this option).

  • "Home" button does not work

    The Home on my Backflip button has stopped working. When I press on it, it does nothing, does not take me to the home screen. I tried to restart the phone several times, but it still does not work.