BIOS recovery

Similar Questions

• On Satellite A60 Pro BIOS recovery procedure?

  Hello after updating of the procedure of flash, computer power not on. (only 3 seconds)
  Bios recovery how?
  Sorry for my English.
  Thank you for your help.

  + English only! +

  + The message was edited by: ADMIN +.

  Sorry to hear that. Unfortunately I m afraid BIOS is screwed up, and you will not be able to recover.

  On this forum I found an interesting thread - http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=54395

  Check it out. Maybe this will help. If not I'm afraid you need professional m help with it.

• Pavilion p6-2201el: the BIOS recovery

  My PC after the upgrade to Windows 10 unbootable. No MESSAGE, no noise, no led on the front panel. Power supply is ok. Think I should do a being of the jumper on the motherboard BIOS recovery. I may have the exact procedure? Thank you ad is lying.

  Hi there @MarcoFast
  
  Welcome to the Forums of HP Support! It's a good place to find the help you need, so many other users, the HP experts and other members of the support staff. I understand that you are looking for help that your system does not start successfully after the upgrade to Windows 10. I'm happy to help you.

  I realize that you may have about the reset of the BIOS, but I think you should try to work first of all through the process on this page. HP - computer desktop PC won't start not (Windows 10.8)

  Then if you still have questions, I would recommend you restore your previous operating system, a feature that allows 10 Windows when you install an upgrade; You can restore 29 days.

  Restoration of Windows 10 in your previous version of Windows - www.thewindowsclub.com

  I wouldn't do anything with the BIOS until you are in your previous operating system, assuming that this is necessary at all.  Here is the rollback of the desktop computer BIOS method: PC desktop HP - BIOS recovery

  I hope this helps.

• G62 bios recovery failed

  I have a big problem with my laptop:

  HP g62-b04SL

  Series {removed privacy}

  I deleted all partitions and I installed ubuntu. Due to a problem with the brightness keys, I read on the web that someone tried to upgrade the bios. But without windows (not), I'm updating the bios with the rescue procedure: WIN + B key to start and a new fat32 bios USB.

  So now my pc is dead

  I read this website of hp recovery method:

  http://support.HP.com/us-en/document/c02723600

  (1) HP_TOOLS partition is erased.

  (2) I did not understand if the USB SHOULD be bootable.

  (3) where I can find the good bios?

  Here, I found two bios version (no job):

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4062&LC=it&CC=it&DLC=it&sw_lang=&product=4301...

  (4) this tool do not write on the "current" folder in the USB

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-92987-1&CC=it&DLC=it&LC=it&...

  (5) when I try WIN + B procedure I see the flashing on key usb but nothing appen.

  The cost of care is probably greater than the value of the laptop. So I use it as a paperweight?

  Thanks, Nicola.

  I solved my problem here (without any form of help HP):

  http://forums.mydigitallife.info/threads/35272-HP-Insyde-BIOS-recovery-steps/page5

  The 01439.fd of the bios are encrypted by hp so that we can use to record our laptop.

  Fortunately, someone has created a tool of Salvation: phoenixtool211

  
  With this tool, you can decript the 01439.fd file and get our .bin and .sig files. Please see the link above.

  Nicola.

• WANT E9G80UA: need the BIOS recovery to restore my BIOS

  have a problem for my bios and need fix this please can someone help me? to send me a bios recovery fail my model (hp envy touchsmart 17 notebook pc 17-j017cl) to restore my bios

  Here is a guide that you should try to see if it will solve your problem.  If this isn't the case, please let me know.

• AT110 F2 Acer Bios recovery server

  Recently, after that a few reboot the server when the update of windows, the BIOS has been reset for manufacturing date, which remind me of the battery was missing, so turning off and replace the battery. After battery replace turn on the server, a silence of blank screen on the hard drive and no response. Not even the logo appear, read the e-manual there is a recovery pin, place the PIN in the recovery for the BIOS mode, turn on hear 2 beeps, then almost 5 minutes, 4 beeps and then turn off/on power even once, does not work.

  Claire tried pin CMOS 5 + minutes with a new battery in and battery for powering down, does not.

  Tried to copy the BIOS on usb and restart it, does not as well.

  Any thoughts will help, thanks in advance.

  After many attempts and finally get this working, I hope that it helps others while ACER itself usually and cannot help you.

  0 turn off your server.

  1. remember the latest version of the BIOS, then upload at least 1 more recent than the current version.

  2 copy the same BIOS file 3 times and name (AMIBOOT. ROM, SUPER. ROM, FLASHABL. ROM) I do not know which he read.

  3. copy these 3 files in a stick FAT16 or FAT32 USB (no need to be bootable)

  4 plug the Jumer s on "Recovery pin" to activate (2-3)

  5. plug in the USB

  6. turn the server and you will hear 2 beeps

  7 and usb should blink (if usb led in it) and 3 ~ 5 minutes later heard a fast beeps

  8. your monitor should see a screen in the BIOS recovery mode.

  9 follow the instructions and the server turn off,

  10 recovery in 1-2 rider card, unplug the USB, and then turn on.

  11 server will make a quick run on then go to off, wait 2 ~ 3 minutes then it works again

  10. the BIOS fixed with a newer version.

  Thanks to Acer DO providing any help on this issue, as well as NO documented anywhere

  in their manual on this problem. I will definitely stay away from this brand in the future.

• 15-n088sr Pavilion: Pavilion 15-n088sr BIOS recovery

  Hello, I try to update my bios for Pavilion 15-n088sr.  I downloaded the bios sp67140.exe (F.66, Intel processor) and install it, then I was copy my current bios and after that I was updating the bios.

  Laptop computer has been reset and wrote all the bios successfully block and restart again... and more than 20 min no action, black screen, no ceiling of flashing, hdd led or screen.

  How I try to recover my bios:

  1 format my Transcend 8 gb DataTraveler USB Flash drive FAT32 and set the name as HP_TOOLS

  2 download and install the bios

  3. download and install Support HP UEFI environment

  4. pull on the battery, plug the usb flash and hold the Win + B keys and turn on the laptop

  and no chance screen, the rest black. Flash USB led blink twice (see gif) fixed light upward. I ' l try to change USB ports/USB Flash drive/BIOS, always the same.

  I also have pervoius bios, I made a new one before flash. How can I restore pervoius or flash new version? The only chip on MiniPRO TL866 programming?

  My GIF bios recovery procedure: (9.6 MB)

  Spoiler (Highlight to read)

  

  Files on my USB key:

  Spoiler (Highlight to read)

  

  

  

  

  

     

  Sorry for my English.

  Аfter several attempts Finally I solved my problem!

  (I spent about 20 hours for this)

  Here we go:

  1. download and unzip using 7zip (F.04) sp62731.exe

  2. download and unzip using 7zip (F.67 (A) sp69887.exe

  4 remove all BIN sp69887 folder files

  3. copy 02161F04. BIN sp62731 folder sp69887 folder and rename to 02161F67. BIN

  4. plug the USB, FAT32, HP_TOOLS (I used Transcend DataTraveler 8 gb)

  4. run the InsydeFlash.exe and create a recovery USB flash drive

  5. go in Hewlett-Packard\BIOS\Current on your USB key and copy the two files 02161.bin and 02161.s12 and paste these files into folders Hewlett-Packard\BIOS\New and Hewlett-Packard\BIOS\Previous

  6. plug the USB flash to your laptop are resisting WIN + B key and power

  Spoiler (Highlight to read)

  

• Z5771 the Bios recovery Procedure

  Black's screen/no post problem.

  What is the keyboard shortcut or the CORRECT for the bios recovery procedure?

  Everyone made a SPI flash using ROM_RECOVERY_HEADER?

  Me he fixed, SPI flash using ROM_RECOVERY_HEADER

  Thanks for your help

• HP pavilion 17 e040us: hp pavilion 17 MSC legacy bios recovery

  I changed my HP to start with legacy CSM, but I couldn't boot from the Windows 7 boot disk.  The laptop came with Windows 8, configured for the UEFI boot before my change.   The screen after startup is empty and now I can not even access the bios menu.

  I tried a Windows 8 USB recovery disk, but the computer does not seem to try to boot from flash, even with the drive disconnected and the drawer open.

  I watched a video of a man to disassemble a HP Pavilion completely down to the base plate, but I have not seen a backup or RTC battery anywhere in the computer.  If I could find the battery backup of the bios to remove or reset the bios somehow with the material, I would.  I waited 4 hours without main battery attached without change.  At this point I don't know if this Pavilion model has same battery backup.  Anyone know how to reset the bios to UEFI preset without the bios menu?  Please note that push F2/F8/F9/F10/F11 and a whole bunch of other buttons does not bring the bios menu at startup (as he did when he was in UEFI mode).

  My next steps are to use the HP Recovery Media application on a 2nd computer create 6 window 8 DVDs and see if it boots from the CD.  If this does not work, I'll call HP support and see if they can send me a custom recovery disk.

  It seems odd that I can't even a menu of bios in legacy mode.  Is this normal?  I suspect that my change of something corrupt configuration and no boot will no longer work.  If the start of the disc does not work, I think I'm stuck with trying to sell some source of backup power keeps the bios State, however long it is.

  Hmm, I got the same answer. I found the document at the following ADDRESS.

  http://support.HP.com/us-en/product/HP-Pavilion-17-notebook-PC-series/5375409/model/5447381/document/c01684768/

  A hard reset can be solved that. If this isn't the case, you can try to recover the BIOS.

  For BIOS recovery information, see the document at the following ADDRESS.

  http://support.HP.com/us-en/product/HP-Pavilion-17-notebook-PC-series/5375409/model/5447381/document/c02693833

  BTW, now you know why the warning of changing mode in the BIOS to the CSM has been posted.

  "Are there ways to do it without software or firmware?  The short answer is the above procedure.

• Envy 17-j130ea: HP Envy 17-j130ea do not have access to the BIOS recovery and black screen

  Hi people,

  The laptop was waking up alone, so I decided to try to update the BIOS. Bis error. The tool has been run on 64 Win10

  The HP tool left me with a black screen and after that I tried to hold the low win + B and the power to access the Bios recovery, but there is no nothing. Tone flashing, nothing.

  I don't know if creating a flash drive with the bios will help as I don't have admin rights in another machine to create the flash drive using HP tool.

  Any ideas? Flash player won't work if BIOS recovery is not pulled up?

  All ideas are welcome.

  See you soon

  Well, I managed to solve the problem overnight without having to wait three days for anyone to answer that after the end of the week, with the following steps:

  1. I had to create a USB key with the bios by using the executable auto HP. It did not help that for some reason any that you have to have the administrator rights on a windows machine. Why aren't files available as well in a simple zip file? It would have helped a lot! Please stop HP right now provide only Autorun... it only compliates things. It took me an extra day just because I couldn't access a machine windows with administrator rights to install the executable file.

  2 - Insert the memory stick with the bios in the dead computer.

  3 - Press the Win + B and press the power button. The machine didn't do any beep or noise that all the guides say. I just kept pressing the key B + Win until I saw a recovery of the Bios screen, finally. Without the memory following stick this same step has not shown, nor does the computer make a noise or show any display, just died.

  4 - wait for the update at the end.

  My Advisor. Do not update windows, it all messed up. It is very reliable to get the memory stick. Too many windows things can interfere in the process, just don't do it from Windows, or at least create the memory stick first while you still can.

• Crisis of the BIOS Recovery on Satellite P100

  Hello

  Usual story. Windows (WinPhlash) BIOS updated was wrong and my P100 is dead.
  I fell on the collection procedure of the crisis that should work on any laptop Phoenix BIOS based.

  However, I either do something wrong or the motherboard is blown more than I expected.
  In my case, I follow the procedure carefully, but my P100 won't enter in crisis recovery mode at all.
  He's not even trying to access/boot USB floppy drive.

  I just tested with A100 my wife and all the readers (HD, DVD and floppy drive) light their LEDs right after turning on the laptop, if the floppy drive works fine. When I press the power button on my P100, fans begin to turn, turn hard drive (and heater for chipset gets hot after awhile), but by pressing Fn + B or Win + B as described in procedure of CR does not any change in the behavior of the laptop. Floppy drive is Toshiba, marked, so there should be no compatibility issues. Voltage all the USB ports, but somehow my P100 refuses to access the floppy drive at startup.

  Any help?

  See you soon,.
  bladteth

  Satellite P100 say isn't the same thing as the Satellite A100.
  The two laptops are supported on different motherboards and different BIOS.

  I put t know what you did, but I see only one solution.
  You will need to contact the ASP in your country for assistance technicians should be able to help

  Good luck and best regards

• Satellite P840: How to create the secure boot with UEFI Bios recovery disk

  Hello

  I have laptop P840 that came pre-installed with Windows 8, which I've upgraded to Windows 8 Pro.
  I then updated to Windows Pro 8.1 by Windows store. Please notify:

  1. how to create a DVD repair or start for windows 8.1 pro with UEFI Bios and boot secured.

  2. I created a USB recovery using the control panel in Windows Pro 8.1. It starts OK. It will be the same as that I've created using the Toshiba Media recovery creator or will it drivers Windows Pro 8.1?

  3. check partitions with disk management, then 3 (450MO, 350 MB and GB 10.90) recovery partitions, 1 EFI system partition and 2 primary (C: programs) and D: for data. I created the recovery DVD and USB 2 disks. Can I remove the 3 recovery partitions?

  Your help will be very appreciated.

  Best regards

  Romero

  I found your previous thread on this topic:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=74272

  > 1. How to create a DVD repair or start for windows 8.1 pro with UEFI Bios and boot secured.
  To be able to boot from sources other than the drive HARD internal, the boot mode must be set to the CSM and secure boot must be disabled!

  > 2. I created a USB recovery using the control panel in Windows Pro 8.1. It starts OK. It will be the same as that I've created using the Toshiba Media recovery creator or will it drivers Windows Pro 8.1?

  Your laptop has been preloaded with Win 8. Right? For example, the USB flash stick memory you just use the Toshiba Recovery media creator contains the Image of Toshiba with Windows 8. Don t mix this Toshiba image with the image that can be created using Microsoft's own backup and restore function. Both are different pictures!

  > 3. Check it with disk management, then 3 (450MO, 350 MB and GB 10.90) recovery partitions, 1 EFI system partition and 2 partitions primary (C: programs) and D: for data. I created the recovery DVD and USB 2 disks. Can I remove the 3 recovery partitions?

  The last partition contains the files on HARD drive recovery. Usually this partition will be created again when you use the Toshiba Recovery disk to put the laptop back to factory settings. So in the case where you n t need this files or the partition, you can delete

• Satellite Pro S300 - 117 PSSB0E Bios Recovery disk?

  Hi I have a Satellite Pro S300-117 PSSB0E-04J00UEN, and it seems that the BIOS was damaged when turned on the power lite 2 flashes green and 2 orange

  I'm looking to be able to rewrite the BIOS using a usb floppy drive or usb key that emulates a floppy drive.

  The problem is that I can not locate the file bios containing the bios Setup disk can anyone help?

  I believe also that the press/hold button when you turn on the power is the one above the tab key but also saw other keys such as F, F, F12 FN and ~. If all the instructions would also be appreciated.

  Kind regards

  Chris G

  > The problem is that I can not locate the file bios containing the bios Setup disk can anyone help?

  I could find a BIOS for this series on the Toshiba driver page we
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/downloadDetail.jsp?soID=2496404&PF=true

  Zipped package contains the based victory and based back the version of the BIOS.
  Unpack this package and read the readme.txt file

  There you can find the details of the update of the BIOS using the diskette

• DV6-6b90se: the bios recovery

  Hello there please help!

  How can I recover BIOS when corrupted and

  White screen; Caps lock will blink twice every 2/3 seconds with the orange wireless button.

  My laptop is HP pavilion dv6 (dv6-6b90se)

  I see. You will need to take the PC to a specialist to a computer repair shop. He could give you close to your problem.  He will take the chip from the BIOS of the laptop and write a new BIOS on the chip and then soldered to the motherboard.

• BIOS recovery for Satellite M100 - 191 PSMA0E

  Hello.

  After asking for help in the forum to find the driver on my laptop Satellite M100 - 191 PSMA0E, I installed windows xp and the driver.

  What happens is that when you try to update the bios of windows, the computer asked me to save the old bios and before that I do something and it was thus blocked for almost an hour.

  I disconnected and then reconnected and now nothing appears.
  It turns on and I can see the dvd player to work, but nothing appears on the image of the laptop.,.

  Can anyone help to recover the BIOS, because I think I messed up here

  Thank you

  Hmm seems something went wrong during the update

  Damn that s really weird in the worst case you will have to send the laptop to a Toshiba ASP to get the module ROM flashed again

  But try the workaround in this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=54395

  the user ale210 has had similar problem and fortunately found a solution.

• Satellite A350D-113 - how the BIOS recovery after faulty update?

  Hi guys!

  Yesterday I stumbled accidentally updating BIOS for my satellite A350D-113 and computer interference in the process. Now, I've got is this common black screen, fan turns and CD-rom checked.
  I know there are discussions on this issue, but all of these senses are very different. Can someone help me with step by step "what to do"?
  I did not usb floppy, but I suppose a common CD - R should be fine replacement.

  I'm desperate rly.
  Thanks in advance.

  Hey Buddy,

  If the BIOS update failed, you can do anything. You need professional help of an authorized service provider. Technicians can try to reflash the ROM module

  Here is their list:
  http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service provider

  Good luck! :)