Bios Tecra 9000 battery empty

Similar Questions

• Problem installing XP on Tecra 9000 battery

  I just installed Windows XP on my Tecra 9000 and re-installed all the drivers via software Driver Genius Professional 2007. Everything worked fine except the driver of my battery (battery model: PA3084U-1BAS) and the infrared device.

  I can't find the proper drivers. You can provide them for me?

  Thank you very much for the help!

  Louis

  Hello

  Usually the doesn´t need drivers battery. The only 'drivers' that needs to be installed (and which are limited to all the energy components in your system) are Toshiba Powersaver. If it is installed, then the battery stuff would be recognized.

  Please go here:

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  Download and install the powersaver and other tools for your machine if not already done. Computers laptop Toshiba need their own tools to work properly and not just drivers.

  See you soon

• The Bios Tecra 9100 battery

  I believe that my Bios battery has not in my Tecra 9100

  Two things...

  Can someone suggest a good place for their source to the United Kingdom?

  Also, someone has a pdf file tell you how to replace?

  Thank you very much

  Hey there,

  If your laptop is a Tecra 9100, she has 3 years international warranty and it's probably under warranty, and no debilitating defects, you can call 08702202202 option 1 and option 2 (it's the support) and they will direct you to a nearby Service Center or you can find the service centers in the website www.computers.toshiba.co.uk under support & downloads and find a service partner.

  See you soon

• Tecra 9000 - BIOS block 1 damaged

  I have a Tecra 9000 with a broken BIOS.

  I looked at upgrading the BIOS FAQ [1] and searched the forum (found [2]). However, I have no Windows installation and at least my Toshiba Tecra 9000 doesn't have a floppy drive, so I can't follow the procedure described here.

  You will find my update of the BIOS for the laptop with the serial number 32222375G: http://de.computers.toshiba-europe.com/innovation/jsp/supportMyProduct.do?service=DE&userAction=SMP_RESU LTS_PAGE & partNumber = PT900E-08YZG-GR & serialNumber = 32222375 G & USER_ACTION = Serial % 20num ber

  So, what should I do?

  BTW: I can't real poster on this forum. I can't post the exact BIOS error message because the forum software claims that I used profanity. The relevant part is contained in the subject line of the thread.

  [1] [http://eu.computers.toshiba-europe.com/innovation/faq.jsp?FID=TRO0000000b07 |] http://EU.computers.Toshiba-Europe.com/innovation/FAQ.jsp?FID=TRO0000000b07]
  [2] [http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=46581&tstart=0 | http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=46581&tstart=0]

  Hi uAyjYdKT,

  Download a version on diskette in the bios called "trad.
  -You can always start your machine?
  -You can install anything on hard drive?

  If both answers are Yes, follow these steps:
  -do a back on your hard drive installation (this can be done on another machine)
  -unzip / uncompress the bios disk do a hard drive
  -Insert the hard drive of your machine and run the bios update

  If the responses were not: see one servicepartner to have made

• Tecra 9000: Problems with 2nd Battery Pack in Slim SelectBay

  Hello

  When I insert the second battery (PA3074U-1BAT) in Slim Select Bay the battery does not charge and is not recognized by the Tecra 9000 laptop: status led on the front is not lit.

  If I insert the DVD of Tecra drive for example, everything works fine.

  I know that the battery is 100% working since I put it in another Tecra 9000 occurs flawlesly.

  Why doesn't the laptop to work with the second battery? Any ideas?

  Thank you.

  Hello

  I put t knows exactly why the second battery does not work in your Tecra 9000, but I found another display created by your all about this Tecra 9000 and looks that you have disassembled the laptop, and maybe you have damage or not connected something.

  In my opinion, every single computer laptop part should be checked again!

• Cannot use the recovery CD after update BIOS on Tecra 9000.

  Failed to retrieve the system (Windows 2000) after update BIOS on Tecra 9000. Recovery CD says "it's a bad machine. Can I go back to old BIOS? Another solution?

  Hello

  Maybe chain can confirm, but I put t he seems the best idea to mix stuff designed for laptops Americans and Europeans models.

  Can you please confirm if the method described in the previous ad works?

• Possible CMOS problem on Tecra 9000?

  Hello

  I have a Tecra 9000, which so far has been superb. However, in the last days when it starts cold, I see a message that says "Bad Checksum (ROM) and mew asking you to press the F1 key to access the configuration." I do, and then press end and Y, the machine then boots fine in XP. Date and time are very good. I tried to Flash the BIOS, but I already have the latest version and so it will not let me.

  Someone at - it ideas? While its not stop working, it's annoying!

  Thank you very much
  Greg Thomas

  Hi Thoma

  It seems that your BIOS battery is defect. There is no way that laptop to save the BIOS settings. Please contact Toshiba Service partner. They can fix. There is no single way to do it.

  Good bye

• Can't turn on my Tecra 9000

  Hello I can not turn on my Tecra 9000. If I press power button power LED only concern. What can I do? Greet Jürgen

  Hello

  Remove the battery, connect the device to the power running and try again.

• Issue when installing fresh Windows XP on Tecra 9000

  I have a Tecra 9000 running Linux.

  I would like to install windows XP but the Setup CD I charge readers and then crashes to windows is the loading screen. I have no recovery disks or driver for this computer as I bought it used. and I don't know why he struggled.

  The SN for the unit is Z1086914G ST900-0.
  I have read forums about similar problems and think it might be the chipset driver for the HARD disk.

  I can't find a driver for nowhere so I can't try this line of thinking.

  Anyone has any ideas.

  Hello

  As I remember the Tecra 9000 does not support RAID or SATA controller that would require RAID or SATA drivers, so I put t think that your problem is related to the missing driver

  Have you tried to install Win XP SP2 from container?
  Are you sure that the HARD drive is OK? I think you should check the HARD disk for some problems initially.

• Tecra M5 - battery is not save

  Hello

  I have a Tecra M5 and the computer does not start on just the battery. It is fine when pugged in the wall (with or without the battery).
  When I turn it on, it briefly displays the battery is there and even load, but it disappears after about 20 minutes.
  I tried to use a different battery, but the same thing happened.

  Thank you.

  In your ad I didn t understand what happen when you use your Tecra on battery power only. When the portable computer is running and Windows is fully loaded what happens when you unplug the AC power supply?

  Can you start laptop with battery only?

• Speakers just stoped working on my Tecra 9000

  Any 1 can help me?
  My speakers just stoped working on my Tecra 9000 and I tried the update for the sound.
  My drivers are up 2 date. I tried all the fixes everything... Please help

  Hello

  What you connect the headphones?
  You hear something?

  Did you check if mute is not activated?

• Tecra 9000: SD card reader does not work with XP

  I've made some progress on this issue, it seems that Cardbus devices cannot share IRQS, although the main problem is that FFDFB200-FFDFB3FF memory address is shared by the SD card controller and device memory SD card. Unless we find a way to edit the registry to resolve this conflict of memory, the simple answer is that the SD card reader does not work under XP.

  I think that it would take a major surgery of the register or re-writing of drivers to move the address of memory used by the SD card device, I always work on this for now.

  Can someone support Toshiba or Toshiba Marketing explain to me why my Tecra T9100 has a "Designed for Windows XP and Windows 2000" sticker on it, when Toshiba does fully support XP on the 9000 series?

  David

  [Edited by: admin]

  Hi David

  Unfortunately, I n t think that you will find here a Toshiba marketing person or other departments. It is ONLY a user to user forum.

  What you say, it is simply NOT true.

  The Tecra 9000 was delivered with 3 different OS.
  It was delivered with Windows XP Pro, W2k and Win98. You can order all the images of this Toshiba home Toshiba service partner. That's why Tecra 9000 does support Windows XP!
  Tecra 9100 has been bundled with Windows XP and Windows 2000 and also supports Windows XP!

  Of course, there are different models with a different hardware configuration, but all supports Windows XP.

  I put t know why you get this error message or why you cannot use the SD card, but I guess you don t use the image of Toshiba. That's why you installed your operating system isn't properly. Because you are a newbie you don t know the Toshiba all the driver installation must be done in the right order and all Microsoft QFEs must be installed also.

  As you can see you must pay attention to many important things if you want to manually install the operating system.

  Good day

• Standby power 7 Tecra 9000

  Hello world

  I realized that newer versions of Toshibas Power Saver
  available for the new notebooks Tecra. I use Power Saver 4 on my Tecra 9000. I just tried to install the latest version of PowerSaver on my Tecra 9000. Installation seems to work, but after completing the procedure, an error sound due and energy savings has not started properly, but I have no massage error. If I try to run the energy saver manually I don't receive a massage of error, that I don't have permission to start the process!
  Is it possible to install and use a newer version of the saving on the Tecra 9000? What is the latest version that I can use on the Tecra 9000? I hope that no version 4?

  Best regards

  Mason

  Hi Matty

  Can you please tell me do you have had problems with energy savings? For each series of notebook for each laptop model there are aligned in each model versions, and you can use only the energy savings that are made for your model of 9000.

  Believe me, the best version for your Tecra is the version that you can find on the CD tools & utilities. If there is no problem with energy saving, it is not necessary to make any update.

• Tecra M4 - battery problem

  Hello

  My Tecra M4 battery appears to discharge on his tours off the coast. If I charge it to 100%, then unplug it and don't use it for about a week when I come to turn it on it used and I need to connect to the mains. When he dose get Windows reports 0%. It seems to lose about 15-20% per day of power turns off.

  Anyone know if this is normal for this model of if there is probably a problem that I have to look at the dose.

  Thank you

  David

  Hello

  This is definitely not normal. I think you need a new battery. That this be enabled by service. You still have warranty, so it will be free.

  Good bye

• Sound problem with Tecra 9000 on Win XP SP2

  Hello!

  First! Excuse me for my English!

  I am trying to install a Tecra 9000 with Windows XP SP2. The problem is the noise. My XP does not recognize the sound card, I am trying to install the drivers, but the system answer me 'the driver was not installed' and I don't know how can do to his works.

  I read a few post on the forum, but I can't solve this problem.

  Could someone help me.
  Thank you!

  I think this doc Toshiba should help you:

  [Windows XP Service Pack 1 and 2 incompatible with existing Yamaha driver sound | http://askiris.toshiba.com/ToshibaSupportSite/search.do?cmd=displayKC&docType=kc&externalId=2772 91xml & sliceId = & dialogid = 54976777 & stateId = 0 0 52121258]

  There is a link to a driver that should help to address this problem.