BIOS update failed on Acer Aspire V3 - 772g wth core 5 Intel and Nvidia Geforce GT 750 M

Similar Questions

• Acer Aspire V3 - 772G - BIOS setup utility menus have disappeared

  Acer Aspire V3 - 772G - BIOS setup utility menus have disappeared

  I have install this laptop brand new, pre-installed with Windows 8.1 for my sister-in-law who bought it.  The installation went well BUT the 16 GB USB device I bought such as advised by the literature of Acer to store the recovery partition was not large enough, 14.4 GB physical capacity.  Acer the book says to use a 16 GB or more, so I did.  I naively thought that a USB key which has been marked 16 GB would be appropriate.  Not the case.  I had to buy a bigger but am still waiting for delivery.

  So I decided to any HARD drive to save the work I had done, but found only the Acronis Backup and Recovery DVD would not start the image.  I went into the utility configuration and adjusted the start parameters to inherited and modified device priority.  Acronis wouldn't so I did not continue.  I went back into the configuration utility, use F9 to restore the default value and to my astonishment that the DUAL boot option was now gone and Windows startup option was also gone.

  This means that £800 this laptop is now unusable.  The installer standalone reconfigured without warning.  Nowhere is there at - it advice or advice do not use the Setup utility when it erases the features that cannot be recovered by using F9 to restore the default configuration.  If this isn't a serious design flaw, I don't know what is.

  I am deeply worried because the idea of a BIOS setup utility behave in this way seems so unlikely that I wonder if anyone will believe me.  How are the Setup utility has been designed to self-harm like this?

  Your suggested action works!  Thank you very much.  You saved my life.

  loungehake

• BIOS Update Fail - Aspire XC - 603G Win 8.1

  Hello

  I have searched here for a few days and read a bunch of messages - which some I tried.

  I don't mean to come down in Win 7 (even though I really like Win 7)

  I'm trying to stick with Win 8.1.

  I was running BIOS P11 - A1 and suddenly started having trouble with the USB 3.0 controller.

  I read some posts here and on other forums that I should see if there is a BIOS update.

  There are in fact four for this machine and so I started with the oldest a P11 - B0L

  T

  To be honest, the instructions in the file Readme PDF weren't that useful

  but I found some great data on the site of the FRIEND who helped me to put up-to-date to B0L - P11.

  I ran the BIOS BACK. BAT file first, but got this error: "4 - error: file ROM ROMID is not compatible with existing BIOS ROMID.

  So I advanced and run AFUDOS file without any parameters in the command and all set file to update correctly.

  But I still have problems with the USB 3.0 controller and the process just seemed to be relatively complex.

  As well my HP and three other Dell had programs BIOS Flash, or simple instructions which worked without any problems.

  I was just lucky with them and there are some hidden secret ritual UEFI and/or MS-DOS that I'm missing here?

  Am I possibly using the incorrect day BIOS file - and if yes which one should I use?

  Thank you

  -Bil

  If your computer came pre-installed with windows 8.1, BIOS correct would be P11. B2 (to the best of my knowledge).

  'L' versions are for Linux.

  http://Acer.custhelp.com/app/answers/detail/A_ID/35410#_ga=1.124769097.237648148.1435182563

• BIOS update failed on Satellite P200 - 13 M

  Hello world

  I have a Satellite P200, (PSPB6E-03G01XFR).
  Yesterday, after attempting to update my BIOS version with the windows application, my phone was cut.

  I downloaded the new version of the bios of Toshiba-Europe Web site (v2.30) and I tried to use the Crisis_Recovery_Disk but no result. :(
  Can someone help me please?

  Unfortunately, in your case only the ASP can help you.

  Does your BIOS update fails and only the ASP can update the ROM module damaged by using a special version of the BIOS

  So, don t waste time and ask the ASP in your country to help.

  Best regards dude

• Satellite L755-S5349 - BIOS update failed - black screen

  Hello.

  So yesterday, I got a Toshiba pop-up message to update my BIOS, so I clicked it and it started to update but then it says "error checking".

  So I closed it, cause I had to restart my computer after one previous update with another program and I thought to try to update the BIOS after you restart.

  But once it restarted it is off, so I tried to put back market but the screen is black, lights are immediately (food, batt etc.) and the fan works just as well. I tried to take the battery out and in again but screen remains black.

  Could someone please tell me what you think it might be and what I have to do.

  I also tried with a HDMI, but it does not recognize.

  Thank you for your help

  Hello

  I think I have bad news for you.
  To me, it seems that the update of the BIOS didn't
  Why? Who knows maybe that some applications that runs in the background affected the BIOS update process.

  I've updated the BIOS on my laptop last night, everything went well. First, I downloaded the BIOS package from the Toshiba page. Then I unzipped the folder.
  I closed all applications that looked like Firewall, antivirus etc software
  Then I did the BIOS update

  At least in cases where the BIOS update failed, you must get in touch with a local ASP Toshiba in order to solve this problem in the best of cases they need to update the module ROM again

  Good luck

• BIOS update failed - where can I download BIOS for floppy drive?

  Hello

  After the BIOS update fail by Windows I need to reflash.

  Where can I download the bios for floppy drive files '?

  Thanx

  Hello

  Update of the traditional BIOS cannot be downloaded.
  Only focused on winning BIOS is available on the European driver Toshiba page.

  In your case, you will need to contact a local ASP.
  The technician can help you and able to reflash the BIOS using a disc of crisis of the BIOS.

  Good luck

• Satellite L40 PSL48E - BIOS update fails on VISTA 32 bit SP1

  The 2.0 with latest downloads BIOS update failed.

  After adjustment of the rights of the user and Disabling UAC is remaining the following command line error:

  C:\TEMP\BIOS>winflash.exe P20B200. BIN
  Cannot copy the BIOS image. (File name error?)
  C:\TEMP\BIOS >

  No idea how solved it, file name is correct?

  You unzip the package to update the BIOS first?
  It is very important that the BIOS package will be unpacked first.

  Then, you can update the BIOS the winflash.exe execution.

• 2330 Pavilion p6: p6-2330 bios update fails

  HP Pavilion p6-2330, I was warned by the HP Support Assistant I had a bios update available.  I clicked on it to start the process, and it downloads, etc. successfully, but when it comes to 'install' step, it turns a little, then returns the error 7, bios checksum error.  I tried this update in all imaginable ways (with all closed virus/malware scan software, since a prompt cmd, etc etc) and nothing works.   Help!

  Hello

  Boot into the BIOS and disable Secure Boot and save the changes. Then download BIOS update and manually install the update.

  HP Secure Boot Windows 8 themes

  I've noticed a number of positions when the Support Assistant for the BIOS update method seems to have failed or HP provided the wrong update of BIOS for the help Wizard to install.

• Acer Aspire V3 - 772G monitor Glitch

  Hi, I bought a new laptop Acer Aspire V3 - 772G, but have a problem with the monitor. I tried to reinstall Win 8, then tried to install Win 7 problem still exist. In the videos below, I captured the question. The problem occurs on a random period.

  Video 1: http://www.youtube.com/watch?v=714-HUYoQtQ
  Video 2: http://www.youtube.com/watch?v=v9rHYhgCGgU

  Send laptop to the Acer license service. The problem has been fixed.

• BIOS update failed - Dell Precision M4600

  I just got a used M4600 and the currently installed bios is A08. When I try to update to A16, it restarts, said it is updating the firmware, but fails at 0%. It gives no reason and no code error I can say. Thanks in advance for any help you guys can provide.

  Is NOT the issue! There is nothing wrong with motherboards M4600 se.

  Everyone tried to find why when you attempt an upgrade of the BIOS, the system fails immediately with a "BIOS Update Failed" basis and any specific error code or more explanations. The answer is in the PDF below--that is the message displayed when the BIOS authentication will fail!

  Just look for the Firmware Signature Dell's "feature" that was introduced in a number of laptop including the M4600.  Doc PDF to download. It is a feature introduced by the NIST requirements.

  In a Word, they changed the way BIOS authenticates a BIOS file before he will use it to update the firmware BIOS & CBS. The M4600 is in the list of "Legacy Systems", where it was introduced. Basically, these systems do NOT have the Firmware of Signature When produced.

  Version A04 introduced this feature. After you have that installed, you will have an option to activate the requirement of Signature of the Firmware (default is). Once activated, it cannot be disabled!

  The problem starts in worm BIOS A08. Something in the code is wrong. Because on some M4600s, it updates the BIOS AND activates the requirement of Signature of the Firmware. After that, the system will authenticate ALL the other versions of the BIOS, so you will NOT be able to upgrade past version 8!

  I got many, many systems for a company. I'm currently sitting on 33 (Yes, that many) M4600 with this exact same situation!

  An exchange of motherboard does not correct the problem. It is to give you a new BIOS chip to tinker with.

• Vostro 3500 BIOS update failed - need recovery procedure

  I got a Vostro 3500 laptop computer work and was doing maintenance to update. I downloaded and installed the BIOS update recommended for this laptop... Dell Vostro 3500 system BIOS 3500 has 12. EXE | Release date of BIOS of Windows/DOS (3 MB) 21/07/2014 updated 21/07/2014 recommended BIOS update failed and left no work of BIOS of the computer. F2 is dead. It will not start. I am sure that there a backup BIOS or primitive still, as when I start the machine without battery and power, using the end key he's constantly trying to read the data from a 2 GB flash drive. I guess he wants to reload the BIOS from a file. I know how to get the ROM content from the file above using the /writeromfile parameter. The big question is, what type of file the 3500 wants to read, and what is the name of the file it is seeking? Is the flash player must be bootable? What is a FRIEND or a Phoenix BIOS? Can someone please? Thanks, Terry

  Here's how to recover a flash update BIOS of your laptop Vostro 3500 failure...

  1. download the Dell BIOS update .exe file to a USB flash drive.

  2. run the .exe with the /writehdrfile parameter file

  3. run the .exe with the /writeromfile parameter file

  4. copy the .hdr winery50.hdr

  5. remove the battery and the power of the dead computer

  6 Insert the flash drive into the USB port on the computer of the death

  7 press and hold the end key and then connect the AC power

  8 dead computer reads USB flash and request if the update should be performed

  9. let the update at the end and then restart.

  10. computer now works normally.

  Useful web site: http://mickitblog.blogspot.com/2011/09/dell-bios-switches.html

• I've updated my Ram in my Acer Aspire 5532 3 GB to 4 GB and it shows that I use only 2 GB and I have an empty slot

  I've updated my Ram in my 5532 Acer Aspire from 3 GB to 4 GB and
  When I run a check on my computer using my Norton 360 it shows
  I have 2 GB and I have an empty slot for the ram, but I have a 2 GB
  in it. What can I do about it? How should I do?

  Make sure that the RAM module is installed correctly.

  If you are running Windows 7 32 bit, you can recognize 3.2 GB of RAM.

  My PC running the 32-bit version or 64-bit Windows?

  http://Windows.Microsoft.com/en-us/Windows7/find-out-32-or-64-bit

• Satellite Pro U400 BIOS update failed - what is the BIOS Boot-block access

  Hello

  My last update of the BIOS has failed and my laptop PSU45E PrU400 Satellite is now out of use.
  I want to use the recovery disk of crisis with a USB floppy drive, but I don't know the key combination to run the boot block.
  Is that someone can help me?

  Best regards

  Hello

  I was wondering what crisis recovery disk you have?  :|
  In my experience the special drive is required, which is available only for ASP technician
  That's why it of necessary to contact the ASP in your country to reflash BIOS.

  In my opinion you shouldn't t try recovery disks of the crisis who loves you in the net, it can drive to the mobo damage

• Tecra M4 - BIOS update fails

  I'm updating my M4 with the Toshiba BIOS provided for support of Windows Vista. It can be found here: http://www.csdsupport.toshiba.com/tais/csd/support/windows_vista/vista_beta.cgi?lsAction=list_files&model_id=1

  However, the update process fails. I can unzip the file downloaded to a file, but then fails it to process with a generic-looking message "install2 has encountered a problem and needs to close."

  My M4 is currently leading the BIOS version 1.70, 14/02/2006.

  Any ideas? Maybe is there a way I can do an update of the traditional BIOS with the new file?

  Be careful with the BIOS updates. I put t know where you bought your Tecra but you try to install the update BIOS, designed for the laptop models in the United States.

  If you have European mobile phone use just updates BIOS you will find under http://eu.computers.toshiba-europe.com > support & downloads.

• BIOS update failed, 2000 with AMD E-300 HP

  I have a laptop of HP 2000

  Specifications of the PC:

  CPU: AMD E-300

  Graphics card: AMD Radeon HD 6310 graphics

  Operating system: Windows 64-bit 8.1

  Product name: HP 2000 Notebook PC

  Product number: C2M21UA #ABA

  The version of the BIOS: Insyde F.61

  Whenever I'm in support of Hp Assitstant it says there is a BIOS update available for AMD processors

  I try to install it, it creates a restore point, it checks the disk space, it connects to HP servers, it downloads the update and then when it comes to install just fails. Help, please!

  Spoiler (Highlight to read)

  

  

  Go to your Support page and download & save the update of the BIOS. Once the download is complete. Double-click it to run it.

  Do not use the Scan option on the page_scroll to the bottom of the list and get the update to the BIOS:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4132&LC=en&cc=us&DLC=en&sw_lang=&product=5305061#N832