BIOS update is safe for the W10 Y50-70?

Similar Questions

• Bios update 64-bit for the Compact Dx2300 HP version 1.14 Rev microtour format. December 18, 2008

  I Dx2300 minitour, I can't use my Ram full I installed 4 GB of RAM and I can use that 3.25 GB of RAM and 770MB is material booked but I have Windows 7 Ultimate 64 bit and external graphics card 'GIGABYTE AMD R7 250 2 GB OC'...

  In other forums they say its because of internal GPU which uses the RAM as VRAM and it can be disabled in the BIOS...

  I found the guide on this motherboard, there must be this option in bios

  MAX DVMT Allocation specify memory DVMT/system to allocate video memory size:
  ● 64 MB
  ● 128 MB
  ● 224 MB

  But in my Bios Thats the only Option missing...

  I can't change my OS just for 32 bit version bios I need 64-bit please help me...

  If you have an add on the graphics card, external reserved yet some system memory.

  Indeed, sometimes the memory more than you add, reserves as an add on the graphics card.

  The internal is disabled, so it should not use memory.

• Update of security for the SQL Server 2005 Service Pack 3 (KB970892) does not load.

  Someone at - he found a way to load it correctly?

  Hello

  Welcome to the Microsoft Vista answers Forum!

  Try the steps below and check if the problem is resolved,

  Download the stand-alone package of "A security update to the SQL Server 2005 Service Pack 3 (KB970892)" from the link:

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=0d878f4b-71e8-4170-9a14-1bce684811ce&displaylang=en

  Now you must install the update in safe mode.

  Restart the computer using safe and then by running the Setup program

  The next step to install the program in safe mode is to restart your computer in safe mode, and then run Setup from the hard drive. To do this, follow these steps:

  1.

  To start Windows in safe mode, follow these steps: one. Click Start and then click on stop. b. Click on restart the computer and then click OK. c. To enter the safe mode of Windows Vista, the computer starts to press on and hold your "F8 key" which should show "Windows Advanced Options Menu" as shown below. Use your key to move to "Safe Mode" and press your enter key. d. When Windows starts in safe mode, click OK. Now try to install the update and check for the issue.

  If the above provided steps fail, then you need to visit the link provided to connect with the following technet forum:

  http://social.technet.Microsoft.com/forums/en-us/categories/

  Hope this information is useful.

  Thank you, and in what concerns:

  Suresh Kumar-Microsoft Support.

  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

• Dell Inspiron 530 s updated... for the first time.

  I want to upgrade the CPU, graphics card and ram. I'm new on this but my bios is 1.0.5 I don't know he should be updated... it has a processor intel celeron 420 @ 1.6 ghz and 1 GB of ram, videocard stock, I found a compatible 400w PSU. Where would I start? Bios upgrade I don't need a computer game leveling mid but this thing is terrible slow... money is not a problem, but I paid $100 for the whole pc. I wouldn't spend $200 to upgrade

  jmiller199071013

  You are welcome.

  BIOS update instructions are on the download page of Dell BIOS.

  Follow the procedures carefully, as a corrupted or failed BIOS flash may "brick" the motherboard.

  Bev.

• The last IOS 9.3.1 is now safe for the users of IPad 2 GSM?  I don't want horrible IOS 9.3 activation problems recur everywhere.

  The last IOS 9.3.1 is now safe for the users of IPad 2 (GSM) download and install?  I don't want the horrible fiasco of activation IOS 9.3 reproduce anywhere!

  Yes, you can upgrade to iOS 9.3.1.

• Will there be an update to FROYO for the Motorola Milestone?

  Hello motorola is when the update 2.2 for the next step?

  It is noted to find on https://supportforums.motorola.com/community/manager/softwareupgrades

  Please give us an indication of type T3 or T4 or something like that

  everyone is left in the dark do same motorola is very pleased with this update (we the users of your products are in)

  Return to the obstruction, I see.

  A simple "Yes, it will be" even if no date is better than the plain ignoring the requests of clients, or how Motorola Europe is all shot on facebook. You have not yet learned a thing about support customer I see.

  On the other hand Motorola himself published the Milestone as 'Flash ready', and which requires 2.2 (Froyo). How do you feel that Motorola will feel all have to manage dozens of lawsuits around the world about false advertising?

  Hey, we could still use this forum to coordinate prosecution. It is not against the rules of the forum, is it?

• Xoom 3 G update 3.1 for the Malaysia

  can I know what update 3.1 for the Malaysia, going to the user, so no one will ask and ask again (which is me... heheheheh).

  Thank you.

  
  

• Cannot install the update of security for the Microsoft Visual C++ 2010 Redistributable Package (KB2467173)

  I can't install the update of security for the Microsoft Visual C++ 2010 Redistributable Package (KB2467173).

  According to Microsoft Update, the error code is 0 x 643.

  I tried to install the update during a clean boot without result.

  Here is the log: https://skydrive.live.com/redir?resid=DDC6388AB2460543! 117

  Hello

  Method 1
  I suggest you to run the fixit from the following link:

  The problem with Microsoft Windows Update is not working
  http://support.Microsoft.com/mats/windows_update/

  Method 2
  I would say you can do clean boot and install the update.

  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  Note: Make sure that you reset the computer back to normal once the diagnosis is complete.

  Method 3
  I suggest you to download and install the update from the Download Center.

  RTM of Microsoft Visual C++ 2010 redistributable MFC security update
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=21576

  Method 4
  I suggest you try the steps from the following link:

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2
  http://support.Microsoft.com/kb/2509997
  
  Note: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article: http://support.microsoft.com/kb/322756
  Note: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

• Update of security for the SQL Server 2005 Service Pack 3 (KB970892) constantly moved, what can I do about it?

  Update of security for the SQL Server 2005 Service Pack 3 (KB970892) constantly moved, what can I do about it?

  The update tried to automatically install dozens of times, but it keeps failing, is there something I can fix which will allow this facility. I have reasonable computer skills but I'm not good at that, I need step by step help and a full explanation of acronyms.

  Hi Laurence,.

  The issue of Windows is more complex than what is generally answered in the Microsoft Community Forums. Appropriate in the TechNet Forums. Please post your question in the TechNet Forums.

  You can check the link to post your question:

  http://social.technet.Microsoft.com/forums/en-us/category/SQLServer

  I hope that helps!

• Error code 64 c for update of security for the SQL Server 2005 Service Pack 3 (KB2494113)

  Have tried to install KB2494113 - update of safety and he constantly fails to install. Help please as I know very little about the "intricacies" of my laptop

  Hi Phillipmuir,

  Step 1:

  You can read the following article and try to reset the Windows Update components and check.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Step 2:

  You can also check the following link and try to download and install the standalone update package:

  Update of security for the SQL Server 2005 Service Pack 3 (KB2494113)

  Hope this information is useful.

• When I update my driver for the card ATI Mobility Radeon HD 3650 with live update my screen goes black

  When I update my driver for the card ATI Mobility Radeon HD 3650 with live update my screen goes black and stays black even after a reboot. I turn it off to go back to my office. nothing will be displayed, but the screen is powered.

  When I update my driver for the card ATI Mobility Radeon HD 3650 with live update my screen goes black and stays black even after a reboot. I turn it off to go back to my office. nothing will be displayed, but the screen is powered.

  Hello

  When you say "live update" are you talking about Windows Update?

  If so, you can go to the ATI site and download the latest driver for this video card. Here are the download links for the drivers later, Windows 7, 9.9 32-bit and 64-bit version for the Mobility Radeon 3000 series.

  ATI Catalyst Mobility Radeon Display Driver 32-Bit

  ATI Catalyst Mobility Radeon Display Driver 64 bit

  Hope this helps

  Thank you for using Windows 7 Ronnie Vernon MVP

• Hello, I've just updated my Photoshop for the most recent version, Im having problems with flow tool, is - that someone is having this problem too?

  Hello, I've just updated my Photoshop for the most recent version, Im having problems with flow tool, is - that someone is having this problem too?

  Hi tonyc75479545,

  Greetings.

  Please check this thread - Photoshop CC 2015.1 liquefy lightens the result on the 16-bit per channel images

  Concerning

  Rohit

• Satellite 4090 BIOS number - message "ready for the update BIOS... ' appears

  Hi all! Excuse my poor English because I'm french.

  A friend gives me his cell phone (a Satellite exactly 4090CDS) because he had a problem.
  In fact, the problem is that when I turn on the computer, I have a single message (not even the toshiba red logo) that is "ready for the update of the BIOS. Place the BIOS update floppy in the drive and press any key when you are ready to move forward."

  So I go to the french site of toshiba, in the BIOS download, I find that I must download this update: http://support.toshiba-tro.de/tools/bios/satellite/4030-4060-100/bios_820.zip

  OK, I download and unpack it on a floppy disk and I start the laptop with the disjette, he said that the update has been successful and it restarts automatically.
  This time, the Red toshiba logo appears, but then I have a black screen with a message:

  Bad checksum (CMOS) *.
  Check the system. Then press the [F1] key.

  And after that, I can't do anything, not even, press F1. If I restart the laptop, I myself meet once more with the first message «Ready for the update of the BIOS...» "and it's still the same.

  If someone could help me understand what the problem is, that would be fine.
  Thank you.

  Bastien.

  It sounds as if your CMOS chip has a problem. It is possible to s that the CMOS battery has failed and the BIOS settings are lost.
  Maybe the RTC battery is empty. In this case, you should connect the AC adapter to charge the battery of the CCF.
  Please note that the RTC battery (CMOS battery) can be fluffed once the main laptop battery has been recharged. In this case, the charge process may take several hours.

  But if after this long process of load this message appears again then I guess the battery is dead.
  I suggest that you only contact your ASP closest to get your phone checked.

• Update BIOS version 1.55 for the hard-to-find S540!

  I discovered by chance that today there is an update of the BIOS for the Thinkpad S540 at the link:

  http://support.Lenovo.com/en_GB/downloads/detail.page?&docid=DS038373

  This is the version 1.55, released on 12 May.

  .. .and even if I go to drivers in general download page for the selected as the portable S540 concerned and looking at the BIOS available in the list of available software and drivers, it is still the old one version 1.54 of 12 March and not the new BIOS version 1.55 may 12 as in the link above!

  I think that there is a problem of updating web pages at the Lenovo site downloads?

  It seems that Lenovo support web pages are updated now so it's resolved.

• In vain after BIOS update that isn't the Satellite A60 boot

  I have an A60 and I have a problem with it now.
  It does not work. I did a BIOS update and the machine turns off, so I then turned back on it and it is stuck in start mode and would have turned off yet again, so I removed the battery and it exploded.
  Now the machine does not start and no led will indicate.

  Please can someone help?

  HEY Warren,

  Usually, when a BIOS update is interrupted, it causes the CMOS become none-functional chip. This will result in the laptop being unable to start up so that the update can be tried again.

  The only option at this point is to take (or send) the laptop to authorized service center which has the necessary equipment for re-flashing the CMOS with the latest BIOS chip.

  Kind regards