Bird fails via enet/100 with ELCK on all other attempts

I use my own code (C/C++) on linux which reads data from a RF Boonton Electronics 4300 running talkmode via a power meter box GPIB-ENET/100. The first Bird command returns data properly but the second fails, and this trend continues thereafter. Change in the amount of delay between the orders of Bird does not appear to have any effect.

Ibsta shows ERR, TIMO, CMPL, and the error seems to be ELCK whenever he fails. There is only one instrument connected to the box ENET/100 and that a copy of my program interact with it. My program is multi-threaded, but I keep a mutex on the gpib lock of in the thread making the reading of the instrument.

I connected one committed GPIB to ENET/100 box and I can only see good handshake and transfers of data from the instrument to the listener at the same frequency that I get good data in the application.

Using a packet sniffer, I see what I guess it's the error response coming back from the box of ENET/100 on all other Bird attempts.

Does anyone have an idea what could be the problem? I would try to run the power meter in another mode where I could ibwrt and get a unique response from the Bird, but I don't think that this mode exists. Thank you.

Jim

So I think I thought a solution to my problem... maybe someone could explain why this works?

If I execute a command ibtrg before each Bird, I never receive any errors. What confuses me, is that I thought that the talkmode supported by the instrument does not require an external trigger, but apparently he... half the time.

BTW, I use older drivers or-488 to the situation above. I also tried to use reminders ibnotify with 488.2 without success.

Jim

Tags: NI Hardware

Similar Questions

My laptop fell during the loading of pictures & stops now, it is locked, how can I reset with losing them all other files

How can I reset lightroom with losing them all my files

Hi Larry,

Go to the location where your Lightroom Catalog is stored and remove .lock file (not .lrcat)

By default, the catalog is stored in the Pictures\Lightroom folder.

If this doesn't help, kindly share more information about the version of Lightroom and the operating system.

Vista 32 bit does not connect to internet via wifi on new router. All other computers work.

I upgraded my router Belkin G to a Netgear N150. My computer laptop windows 7, ipad and ps3 to connect to the internet. My Vista laptop will connect via cable but not wireless. The wireless still works on the old router. The new router DHCP assigns an ip address from my laptop to visa, but it's a unidentified network which is local only.

I tried to reset the tcp/ip and winsock stack.

I disabled wireless utility from Toshiba configFree.

I ran:

ARP d

ping 192.168.1.1

Ping 192.168.1.1 with 32 bytes of data:

Response of 192.168.1.15: Destination unreachable host.

Response of 192.168.1.15: Destination unreachable host.

Request timed out.

Response of 192.168.1.15: Destination unreachable host.

Ping statistics for 192.168.1.1:

Packets: Sent = 4, received = 3, Lost = 1 (25% loss),

ARP - a - v:

Interface: 192.168.1.15 - 0xb

Internet address physical address type

192.168.1.1 00-00-00-00-00-00 Invalid

ipconfig/all /allcompartments

Windows IP configuration

==============================================================================

Information network for the compartment 1 (ACTIVE)

==============================================================================

Name of the host...: jennifer-PC

Primary Dns suffix...:

Node... type: mixed

Active... IP routing: No.

Active... proxy WINS: No.

Wireless network connection Wireless LAN adapter:

The connection-specific DNS suffix. :

... Description: Atheros AR5007EG Wireless Network adapt

Physical address.... : 00-24-D2-8B-4F-ED

DHCP active...: Yes

Autoconfiguration enabled...: Yes

Address IPv6 local link...: fe80::6476:106d:3c70:4bf3% 11 (Preferred)

IPv4 address: 192.168.1.15 (Preferred)

... Subnet mask: 255.255.255.0.

Lease obtained...: Thursday, February 16, 2012 20:11:05

End of the lease...: Friday 17 February 2012 20:11:04

... Default gateway. : 192.168.1.1.

DHCP server...: 192.168.1.1.

DHCPv6 IOOKING...: 285222098

DHCPv6 DUID customer...: 00-01-00-01-13-87-1B-E5-00-1E-33-80-70-41

DNS servers...: 192.168.1.1.

NetBIOS over TCP/IP...: enabled

Ethernet connection to the Local network card:

State of the media...: Media disconnected

The connection-specific DNS suffix. :

Description...: Realtek RTL8102E Family PCI - E Fast Ethern

and NIC (NDIS 6.0)

Physical address.... : 00-1E-33-80-70-41

DHCP active...: Yes

Autoconfiguration enabled...: Yes

Card tunnel Local Area Connection * 7:

State of the media...: Media disconnected

The connection-specific DNS suffix. :

... Description: Teredo Tunneling Pseudo-Interface

Physical address.... : 02-00-54-55-4E-01

DHCP active...: No.

Autoconfiguration enabled...: Yes

Card tunnel Local Area Connection * 11:

State of the media...: Media disconnected

The connection-specific DNS suffix. :

Description...
. : isatap. {0E605CFB-74AF - 441-A-8404-DC7C2175F
9 9}

Physical address.... : 00-00-00-00-00-00-00-E0

DHCP active...: No.

Autoconfiguration enabled...: Yes

Card tunnel Local Area Connection * 17:

State of the media...: Media disconnected

The connection-specific DNS suffix. :

... Description: isatap. {0E605CFB-74AF - 441-A-8404-DC7C2175F

9 9}

Physical address.... : 00-00-00-00-00-00-00-E0

DHCP active...: No.

Autoconfiguration enabled...
. : Yes

Card tunnel Local Area Connection * 18:

State of the media...: Media disconnected

The connection-specific DNS suffix. :

... Description: isatap. {BCF6118F-5DAA-4C0C-BEBD-710E18983

E72}

Physical address.... : 00-00-00-00-00-00-00-E0

DHCP active...: No.

Autoconfiguration enabled...: Yes

Card tunnel Local Area Connection * 19:

State of the media...: Media disconnected

The connection-specific DNS suffix. :

... Description: isatap. {0E605CFB-74AF - 441-A-8404-DC7C2175F

9 9}

Physical address.... : 00-00-00-00-00-00-00-E0

DHCP active...: No.

Autoconfiguration enabled...: Yes

Card tunnel Local Area Connection * 21:

State of the media...: Media disconnected

The connection-specific DNS suffix. :

... Description: isatap. {0E605CFB-74AF - 441-A-8404-DC7C2175F

9 9}

Physical address.... : 00-00-00-00-00-00-00-E0

DHCP active...: No.

Autoconfiguration enabled...: Yes

I can't think of anything to try. I really want to go back to my other router. Any help would be appreciated.

Solved. Was a driver problem with Atheros adapter Vista security and network. Downloaded new driver and Voila.

GPIB-ENET/100 problem with NEITHER 488.2 v2.5 under Suse 10

Hello

I installed "NOR-488. ' 2 (Linux) Version 2.5 for Linux - 32-bit ' under Suse 10. Now, I try to add the GPIB-ENET/100 with gpibexplorer but failed:

1. I have connected the GPIB_ENET/100 directly to the computer (eth1) with a crossover cable.

2. as a result of gpibexplorer guests, I observed the PWR/RDY LED is orange flick so configured IP address/hostname as 192.168.1.2.

3. then I clicked on the button 'search for GPIB-ENET/100', I had 'no device to display.

4. I configured the IP address/host name as 'NIENET', which is the default hostname printed on the rear side of the unit and got the same result at step 3.

5. one thing I need to mention is that I installed nienet-linux - 1.2 before and the ENET box didn't work with it either. I put
```
192.168.1.2 NIENET gpib0
```
in the file/etc/hosts and I have deleted all the files of this facility.

The State of the network types arenetstat - rn)
```
Kernel IP routing table
Destination     Gateway         Genmask         Flags   MSS Window  irtt Iface
192.168.1.0     0.0.0.0         255.255.255.0   U         0 0          0 eth1
134.105.192.0   0.0.0.0         255.255.248.0   U         0 0          0 eth0
169.254.0.0     0.0.0.0         255.255.0.0     U         0 0          0 eth0
127.0.0.0       0.0.0.0         255.0.0.0       U         0 0          0 lo
0.0.0.0         134.105.192.1   0.0.0.0         UG        0 0          0 eth0
```
and the Ethernet card type isifconfig)
```
eth0      Link encap:Ethernet  HWaddr 00:0A:5E:52:48:51
          inet addr:134.105.193.25  Bcast:134.105.199.255  Mask:255.255.248.0
          inet6 addr: fe80::20a:5eff:fe52:4851/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:54226 errors:0 dropped:0 overruns:1 frame:0
          TX packets:15248 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:17829035 (17.0 Mb)  TX bytes:3468412 (3.3 Mb)
          Interrupt:177 Base address:0x6000

eth1      Link encap:Ethernet  HWaddr 00:11:2F:AE:5D:55
          inet addr:192.168.1.1  Bcast:192.168.1.255  Mask:255.255.255.0
          inet6 addr: fe80::211:2fff:feae:5d55/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:5 errors:0 dropped:0 overruns:0 frame:0
          TX packets:285 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:2950 (2.8 Kb)  TX bytes:12186 (11.9 Kb)
          Interrupt:185 Base address:0xb000

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:489 errors:0 dropped:0 overruns:0 frame:0
          TX packets:489 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:44592 (43.5 Kb)  TX bytes:44592 (43.5 Kb)
```
My questions are:

1. in GPIB, will I set of Configuration IP address AND host name or IP OR hostname? If it is "OR", they must be linked in what file?

2. "NIENET" is the default host name. How to change?

3. What is the problem with my setup?

Thanks in advance and best regards,

Weining

Hi Weining,

to be able to set up a NEW ethernet device, it must be connected to eth0 - otherwise the GPIB Explorer won't be able to find it. Which is clearly described in the referenced article, and there is no work around for this need.

You can only configure devices on eth1 if they already have an assigned static IP address.

Then please follow the steps below (summary of the article that you and I already linked):

(1) connect the new ENET/100 to eth0

(2) open the GPIB Explorer, select "New Devce" and click on the "Search" button to find the box.

(3) select the found device and change its IP settings to keep the network connection on eth1 and leave the Explorer GPIB

(4) now unplug the eth0 device and connect it to eth1

(5) restart the GPIB Explorer, choose 'New' and enter the static IP address you gave the ENET box.

Best regards

Sebastian

Problem with getting communication with old instrument GPIB-ENET/100

Hello!

I'm trying to get my program in VB.net to communicate with an older instrument (Infratek 305 A, measure of power) via a GPIB-ENET/100 device.

The manual of the instrument does not say what GPIB standard, it supports, but the instrument is detected by the measurement and Automation Explorer.

Detected by that I mean that MAE has detected an instrument located on the right GPIB address, but indicated identification is the output measure instrument string

instead of the name of instrument (as shown for some more recent instruments of Agilent).

When I run my application, I followed the communication with NISpy.

Configuration of the device seems to work and I present only once in the program.

The problem is reading data from the instrument. Whenever I read the data, I get a correct string of the instrument. But the problem is

I get the same data in two consecutive and all readings first after that I get new data and also these new data are received in two consecutive readings.

According to the manual of the instrument the instrument generates the data as follows:

"A row of data ends with CRLF. The instrument can send multiple rows of data. "When all of the data transfer is complete the EOI (end or identify) is sent.

My endpoint settings are:

Send EOI to write complete: YES

Terminate read on EOS: No.

EOS byte: 2

8 bit EOS compare: YES

Define EOI with EOS on write: No.

How can I configure the GPIB-ENET/100 to work with my instrument?

Here are som NISpy logs:

# Configuration #.

61 ibwrt(UD3, "C0C2C4C8..", 10 (0xA))
PID: 0x0000113C Thread ID: 0x000008B4
Departure time: 13:54:43.671 call duration 00:00:00.079
ibsta: 0 x 100 iberr: 0 ibcntl: 10 (0xa)

62 ThreadIbcntl()

PID: 0x0000113C Thread ID: 0x000008B4
Departure time: 13:54:43.750 call duration 00:00:00.000
ibsta: 0 x 100 iberr: 0 ibcntl: 10 (0xa)

63 ibwrt(UD3, "K0K3K5K9..", 10 (0xA))
PID: 0x0000113C Thread ID: 0x000008B4
Departure time: 13:54:43.765 call duration 00:00:00.125
ibsta: 0 x 100 iberr: 0 ibcntl: 10 (0xa)

64 ThreadIbcntl()
PID: 0x0000113C Thread ID: 0x000008B4
Departure time: 13:54:43.890 call duration 00:00:00.000
ibsta: 0 x 100 iberr: 0 ibcntl: 10 (0xa)

65 ibwrt(UD3, "F14F18F24..", 11 (0xB))
PID: 0x0000113C Thread ID: 0x000008B4
Departure time: 13:54:43.890 call duration 00:00:09.250
ibsta: 0 x 100 iberr: 0 ibcntl: 11 (0xb)

66 ThreadIbcntl()
PID: 0x0000113C Thread ID: 0x000008B4
Departure time: 13:54:53.140 call duration 00:00:00.000
ibsta: 0 x 100 iberr: 0 ibcntl: 11 (0xb)

### LU ###

437 ibrd(UD3, "*AC/1.0A480V/...", 1024 (0x400))
PID: 0x0000113C Thread ID: 0x000008B4
Departure time: 13:58:52.484 call duration 00:00:00.094
ibsta: 0 x 2100 iberr: 0 ibcntl: 225 (0xe1)

438 ThreadIbcntl()
PID: 0x0000113C Thread ID: 0x000008B4
Departure time: 13:58:52.578 call duration 00:00:00.000
ibsta: 0 x 2100 iberr: 0 ibcntl: 225 (0xe1)

439 ThreadIbcntl()
PID: 0x0000113C Thread ID: 0x000008B4
Departure time: 13:58:52.578 call duration 00:00:00.000
ibsta: 0 x 2100 iberr: 0 ibcntl: 225 (0xe1)

Hello!

I don't have the opportunity to test with other controllers.

However, I found a solution to my problem.

The instrument should output 4 lines of data.

L1 - line with comments

L2 - line with current values

L3 - line with the values of voltage

L4 - line with power values

The first line of the reading stops the instrument of implementation of additional measures.

The measurements in the instrument began reading the last line of data (L4)

The problem was that the instrument for a reason any also released a fifth line, which was empty.

Read this line 5' th stopped the instrument again.

By configuring the HW to finish reading on EOS, with EOS PMQS, the value byte, I could read the

buffer of the instrument with a line output instead. This way I could read just L1 - L4

and the instrument could work again.

Next time I should read data from the Instr. first of all, I would like to read the empty line, then

L1 - L4.

Why the outputs Instr. an additional empty line will be left not resolved.

My problem is solved.

With the help of two GPIB-ENET/100 boxes with ibconf - gpib1 selection?

I hope this is the right forum for this post.

I'm trying to use ibconf on Solaris to configure a workstation to use 2 boxes GPIB-ENET/100. I have never tried to configure a computer to use multiple boxes GPIB-ENET/100 at the time, so I don't have a lot of confidence that I'm doing it correctly for two boxes. Especially given what I describe below.

According to the manual page 4-2 of the "Getting started with your GPIB-ENET/100 and NOR-488.» 2 for Solaris. "

To identify your GPIB-ENET/100 in ibconf, perform the following steps:
1. press on to select the option rename.
2. type the alias name of host, host name, or IP address assigned to your
GPIB-ENET/100 and press .
3. press to exit, chooose to save your changes.

I followed these steps for both boxes, but the banner at the top of the menu always says 'Card device for Council gpib0' and he always says "gpib0" just to top the host name that I go. Shouldn't he State gpib0 first Board and gpib1 of the Committee on the second? But I don't see a way to move to gpib1, or the unit of the second box ("Board") map. Instead, it seems that I crushed the entrance of host name for the first box, I've identified using the steps above with the host name of the second box, that I've identified by following the steps above.

I looked through the manual as well as fact a search online, nothing helps. Which brings me to this forum.

How should we do to get the pilot configured to use the GPIB-ENET/100 boxes?

Thanks in advance. Out of my ibconf is below (that's what it actually looks like, either incidentally - the strange on the line with dev2, dev13, and dev24 is not an artifact of copy/paste):

===============================================================================
National Instruments GPIB Software Configuration utility Rev A.3.
Copyright (c) 1991 National Instruments Corp.   All rights reserved.
===============================================================================

File: / etc/gpibrc = CAPACITY: 8-plank 44 devices =
----------         -----------
Press a key to continue * -.
----------------- -------
---------------- ----

-------
----

===============================================================================
National Instruments |    Card device for Council SPARCstation gpib0
===============================================================================
-----------
| GPIB0 |
----| nienetD |
|   |_________|     * Use the cursor keys h, j, k, l & to select a device or a Commission.
|                   * Use the buttons below to select the desired action.
=====|------------------=======================================================
| - 0 dev1 |-dev12 0 1 dev23 2 dev34
= | - dev2 0 = = |-ev13 = 1 dev24 = 2 = dev35
| - dev3 0 0 |---4 1 dev25 2 dev36
| - dev4 0 1 dev15 1 dev26 2 dev37
| - 0 dev5 1 dev16 1 dev27 2 dev38
| - 0 dev6 1 dev17 1 dev28 2 dev39
| - 0 dev7 1 dev18 2 dev29 2 dev40
|---0 dev8            1 dev19           2 dev30                                                                   2 dev41
| - 0 1 dev20 dev31 2 dev42 dev9 2 |-0 1 dev21 2 dev32 dev10
| - 1 dev22 2 dev33 dev4311
3 dev44
|

^ Q: help ^ r: Rename ^ T: (de) connect ^ edit I: ^ o: output

I just thought of it. My terminal has been updated with the ansi format. That was streaked the menu and blocks my view of the operating instructions ^ B / ^ F to see maps for more tips. The dockers affecting my vt100 terminal. You can even see how my menu was watered to the top at the bottom of my original message. I didn't know until now that the menu was supposed to look like different (although I knew it).

GPIB/ENET 100 connects but cannot pass utility Troubleshooting Test or detect instruments

Hello

I'm trying to control two power supplies (AC and DC) Agilent by GPIB. To connect to the computer, I use a GPIB/ENET 100 device but make me connection errors.

In the beginning, I followed the steps detailed here (http://www.ni.com/gettingstarted/setuphardware/instrumentcontrol/gpibenet.htm) and managed to connect using wizard Ethernet GPIB. Initially, I only ran the software verification of the troubleshooter NOR 488.2 and thought everything was working well, since after having wiped. When I went to the MAX, however, the produced instrument scan and error. I don't have the instrument which I have now so I can't be too specific I want but the error was different from those I saw in the troubleshooting resources. He simply said something to the effect of "there was an error."

During troubleshooting, I found that the device has failed to pass the test of the troubleshooter nor 488.2. I tried a few fixes suggested in the help option of public service including moving ping IP and suggestions for change. Ping has been answered, but she came from a different IP address and said something to the effect of non-responsive, while the same amount of packets that have been sent back and none were lost. Initially, I tried to adjust IP the device manually to the previously defined address and everything else (the subnet mask, etc.) set to zero. Then I tried corresponding subnet of the computer, then by asking Assistant Ethernet GPIB to suggest an address, then the first with the IP address itself has changed to the previously defined address and finally the DHCP option (wouldn't cross). None of these worked and got the same results of the ping command. In fact, when I'd go to MAX to check for changes to the intellectual property, they would not be there, and I enter the values again. Nothing I have tried so far has led to the aircraft passing the test of the utility.

I went through all of the fixes suggested in the troubleshooter nor 488.2 and searched online but nothing worked. I would really apprecate some help on this issue and hope that someone on this forum has addressed a similar problem. Finally, if you need me to post screenshots or specific error messages, I can do so starting Monday.

Thanks in advance,
Yusif Nurizade

Hello Yusif,

How did the GPIB/ENET 100 connected to your PC? Is it connected via a router or is - this directly connected via an ethernet cable? When the GPIB/ENET 100 is connected to a router, it might get an IP via DHCP, but when it is connected directly, you should make sure your PC and the ENET 100 are on the same "network". This means that you will need to make sure your firewall is disabled on your PC (to start) and ensure that the address IP of your PC and the ENET 100 range are similar, as well as the mask subnet for both devices. Can you confirm that you have done this? Please let me know and I'll do my best to help!

IP default GPIB-enet/100

I have a GPIB-ENET/100, which has been reset to factory default. I want to set a new IP address for her, but I was not able to know what is the default IP address, so that I can put IP my computer and subnet mask to allow me to find it on the local subnet. I have read the manual on the device and searched the forums and knowledge base, but could not find anything. I know I saw it somewhere in the past when the setting of some of them before. Does anyone have this info? Thank you.

Holmes,

How do you try to connect to your device? You connected directly via a cable crossed, or connected to the wall? If you have not tried to connect directly, please try this.

Many KnowledgeBase articles for this device have been archived and are is no longer being updated, which may explain the difficulty finding. Try the one below for setting up if you have not already.

http://digital.NI.com/public.nsf/allkb/C7F73559653B2C5686256E6100709D5D

Driver for GPIB-enet 100 on Ubuntu (10.04 v)

Hello

We are currently moving a Solaris 9 system to linux (Ubuntu 10.04) and I would like to know if there is a driver to interface amendments current GPIB-enet 100 boxes.

Thank you

Hello

Pour to communicate with GPIB ENET 100 boxes, you will not need to PyVISA.

Normally, the installation procedure of the second document that I mentioned has, as a first step, instructions pour Installer correctly NI-VISA and NEITHER 488.2.

These two components should be enough pour allow you to communicate with your boxes.

Sincerely,

KB2887069 Windows update fails to install, even with the audio drivers and uninstalled AV

KB2887069 Windows update fails to install, even with the audio drivers and uninstalled AV.

Background: I am setting up a pavilion of 500-164 equipped with OEM specs, specifically:

-AMD/Radeon APU

-Windows 8 6.2.9200

-See sysinfo below for more details

The PC brought to the specifications of the plant, with all Windows updates applied with the exception of KB2887069, which breaks down at the update. With the exception of troubleshooting the failure of the update, none of the changes have been made. The Windows KB2887069 update fails to install as well through the automated process when tried manually via a direct download.

Additional troubleshooting measures to date include:

-Uninstall the software OEM AV (Norton), then by restarting.

-Temporarily disable all the features of Windows Defender.

-Temporarily uninstall the audio driver (IDT High Definition Audio CODEC) OEM.

-Realization of an analysis of the SFC system (with no error found).

Results: The Windows Update full KB2887069 with a failed State and produced the following results.

2014-11-15 19:25:08:807 3488 1 b 84 Misc = logging initialized (build: 7.8.9200.17099, tz:-0500) =.
2014-11-15 19:25:08:807 3488 1 b 84 Misc = process: C:\Windows\system32\wuauclt.exe
2014-11-15 19:25:08:807 3488 1 b 84 Misc = Module: C:\Windows\SYSTEM32\wuaueng.dll
2014-11-15 19:25:08:807 3488 1 b 84 Manager:
2014-11-15 19:25:08:807 3488 1 b 84 Handler: START: Manager: installation CBS
2014-11-15 19:25:08:807 3488 1 b 84 Manager:
2014-11-15 19:25:08:807 3488 1 b 84 Manager start installation of CBS update BCA9DC69-8FB6-4B79-8E1B-E706B32B55C9
identity of 2014-11-15 session 19:25:08:807 3488 1 b 84 CBS Handler: 30409011_3339369637
the package identity 2014-11-15 19:25:08:807 3488 1 b 84 CBS Handler: Package_for_KB2887069 ~ 31bf3856ad364e35 ~ amd64 ~ ~ 6.2.1.1
2014-11-15 19:25:08:822 3488 1 b 84 Manager stand-alone installation with source=C:\Windows\SoftwareDistribution\Download\c3f79bd7f837c5015dba3018d0ab7d67\windows8-rt-kb2887069-x64.cab, workingdir = C:\Windows\SoftwareDistribution\Download\c3f79bd7f837c5015dba3018d0ab7d67\inst
2014-11-15 19:25:12:567 3488 Manager e00 FATAL: CBS called error with 0x8007371b.
2014-11-15 19:25:13:269 3488 1 b 84 Manager FATAL: full install of CBS update with type = 0, requiresReboot = 0, installerError = 1, hr = 0x8007371b
2014-11-15 19:25:13:378 3488 1 b 84 Manager:
2014-11-15 19:25:13:378 3488 1 b 84 Handler: END: Manager: installation CBS
2014-11-15 19:25:13:378 3488 1 b 84 Manager:
2014-11-15 19:25:13:378 880 fa0 Agent *.
2014-11-15 19:25:13:378 880 fa0 Agent * END * Agent: installing updates [CallerId = wusa]
2014-11-15 19:25:13:378 880 fa0 Agent *.
2014-11-15 19:25:13:378 6676 1a0c COMAPI > COMAPI - RECOVERY -: install [ClientId = wusa]
2014-11-15 19:25:13:378 6676 1a0c COMAPI - tender installation complete (successful = 0, succeeded with errors = 0, failed = 1, missing = 0)
2014-11-15 19:25:13:378 6676 COMAPI - restart required 1a0c = No.
2014-11-15 19:25:13:378 6676 1a0c COMAPI - WARNING: exit code = 0x00000000; Call error code = 0 x 80240022
2014-11-15 19:25:13:378 6676 1a0c COMAPI-
2014-11-15 19:25:13:378 6676 COMAPI COMAPI - END - 1a0c: install [ClientId = wusa]
2014-11-15 19:25:13:378 6676 1a0c COMAPI-
2014-11-15 19:25:17:605 6676 1 a 10 COMAPI - COMAPI: IUpdateServiceManager::RemoveService -.
2014-11-15 19:25:17:605 6676 COMAPI 1 has 10 - ServiceId = {b043431c-3a5f-4bf5-b5b2-34a542b07e41}
2014-11-15 19:25:17:683 6676 1 a 10 COMAPI IUpdateService removal scan volatile package service, serviceID = {B043431C-3A5F-4BF5-B5B2-34A542B07E41}
2014-11-15 19:25:17:683 6676 1 a 10 COMAPI WARNING: ISusInternal::RemoveService failed, hr = 80248014
2014-11-15 19:25:17:683 880 524 Agent WARNING: WU client omits CClientCallRecorder::RemoveService with error 0 x 80248014
2014-11-15 19:25:18:385 880 1a7c report REPORT EVENT: 2014-11-15 19:25:13:378 - 0500 1 182 {807311FF-2CC0-45E2-B903-238AD59E6377} [AGENT_INSTALLING_FAILED] {3CE1E1A4-CA14-4F2A-BEA1-71029F73AFD6} 101 501 8007371 b wusa error content install Installation error: Windows failed to install the following update with error 0x8007371b: update security for Windows (KB2887069).
2014-11-15 19:25:18:385 880 1a7c report CWERReporter::HandleEvents - WER report upload completed with status 0 x 8
2014-11-15 19:25:18:385 880 1a7c WER sent report: 7.8.9200.17099 0x8007371b (0x8007371b) 3CE1E1A4-CA14-4F2A-BEA1-71029F73AFD6 install Unmanaged 101
2014-11-15 19:25:18:385 880 1a7c report CWERReporter finish event management. (00000000)
2014-11-15 19:35:18:718 880 1 to 28 in THE # to THE: initialization of automatic updates.
2014-11-15 19:35:18:906 880 1 to 28 WuTask WU Uninit Manager tasks
2014-11-15 19:35:19:795 880 1-28 Service *.
2014-11-15 19:35:19:795 880 1-28 Service * END * Service: out of Service [exit code = 0 x 240001]
2014-11-15 19:35:19:795 880 1-28 Service *.

https://onedrive.live.com/embed?CID=F6521FC0B4D999D4&RESID=F6521FC0B4D999D4%21152&AuthKey=AH4VBaqSBjRn6lU"width ="320"height ="272"frameborder ="0"scrolling ="no">

I find it peculiar that you just bought a HP computer brand new, still-in-the-box, which came with Windows 8, not 8.1, preinstalled Windows. That said, cross your fingers, roll up your sleeves and try the fix following multiple step, I cooked up just for your computer...

ACTIONS

[You may want to print these instructions for reference offline. IMPORTANT => NO SKIP & perform all steps in one uninterrupted session! [If a step said to restart, restart! ]

1 right-click on the link, select SAVE TARGET as.... & download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

2. close all open applications (that is, anything with an icon on the taskbar).

3. right click on the file that you saved in step #1 above and select run as administrator to run the Norton utility. DO TAP not your keyboard until the race ends, then restart.

4. right-click on the following link and save the download to your desktop: ie8 - rereg.all.zip [1]

4B. right click on the file that you saved in # 4 has & select EXTRACT ALL. This will create a new folder in Office also appointed ie8 - rereg.all. The folder contains both scripts below (plus a third that will NOT be).

Note-online scripts are good for IE9, IE10 & IE11, too,

5. close all open applications (that is, anything with an icon on the task bar), open the folder created in step # 4 b above & double-click on the file named ie8 - rereg.32on64.cmd to run the script.

5 b. Repeat this for the file named ie8 - rereg.64on64.cmd then restart.

6. reset Internet Explorer by the MANUAL of instructions on this page-online http://support.microsoft.com/kb/923737

Note => for best results, check the option Remove personal settings .

7 run the Windows Update Troubleshooter from start to finish by the first paragraph on this page-online http://windows.microsoft.com/en-us/windows-8/troubleshoot-problems-installing-updates [2]

8. restart once more then test by launching a manual check of updates & see if KB2887069 any/all others updated and allows to install now. Follow all the instructions.

9. assuming all went well, see if Windows 8.1 is available through the store Windows and, if so, if it will be properly installed. Still, follow all the instructions.
- Upgrade to Win8.1: FAQ
  http://Windows.Microsoft.com/en-us/Windows-8/upgrade-to-Windows-8
- The upgrade to Win8.1 tutorial
http://Windows.Microsoft.com/en-us/Windows-8/update-from-Windows-8-tutorial
What's new in Win8.1?
http://Windows.Microsoft.com/en-us/Windows-8/whats-new

10. assuming that Win8.1 is now installed, perform another manual check for updates & install all Security updates offered (if any); Follow all the instructions.

11. in response to this post with a status report. Also confirm (hopefully) that Windows 8.1 has been installed successfully.

Good luck!

===========================================================
[1] source: page http://iefaq.info/index.php?action=artikel&cat=42&id=133&artlang=en of my colleague IE MVP Kai Schatzl

[2] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.

Changing table via the package with immediate execution (problem)

Hello
I have a unusual problem. I have a package that contains the procedure that via execute immediate statement, creates a table on which he performs different actions for example:
-alter table some_owner.dummy_table noparallel
-create index some_owner.idx_name on some_owner.dummy_table (column)...
But I only managed to run move and create synonym table/public via execute immediate statement. Actions as alter table and create index fails with error ORA-01031: insufficient privileges.
Note If call these commands outside the package (a simple script) this all done OK.
I found a way, where I set the AUTHID CURRENT_USER command create package statement. In this way all the actions executed OK.
I wonder why I can't change the table via the package with immediate execution on a table that is in the tablespace "SOME_TABLESPACE" and the title of owner "SOME_OWNER", without putting the AUTHID command on the package.
There must be a problem why a package cannot change the table which is owned by the user 'SOME_OWNER '.
All useful responses would be appreciated.

I have a unusual problem.

No - you don't have. This question has been answered SEVERAL times on this forum and others.

But I only managed to run move and create synonym table/public via execute immediate statement. Actions as alter table and create index fails with error ORA-01031: insufficient privileges.

OK - your username doesn't have privileges to do these operations or only received privileges through roles.

Roles are DISABLED in named PL/SQL blocks that use of the AUTHOR's rights.

Note If call these commands outside the package (a simple script) this all done OK.

I found a way, where I set the AUTHID CURRENT_USER command create package statement. In this way all the actions executed OK.

Of course - the roles are NOT disabled in named PL/SQL blocks that use the rights of the APPELLANT or in anonymous blocks.

I wonder why I can't change the table via the package with immediate execution on a table that is in the tablespace "SOME_TABLESPACE" and the title of owner "SOME_OWNER", without putting the AUTHID command on the package.

Well now you know!

Do not start W30Dt-A-100 with Windows 8 satellite

I have a toshiba satellite W30Dt-A-100 with Windows 8.
But the laptop does not start the Windows 8.

I get only the screen + Toshiba Leading Innovation > +.

Can someone tell me how I can insert the BIOS or how do I turn on the computer.
I think that it does not check the disk.

Where and how can I open to find the hard drive.

Well cordially

At first I want to say is: don t open anything on your own. I presume that for laptop is pretty new with valid warranty so don t do anything that can void the warranty.

Since when did you notice this kind of behavior?
Have you noticed the problem even if you use it in laptop mode and tablet?

Trying to copy a video on my DVD recorder via AV connection with adapter. Audio is fine, but no video on the screen

Trying to copy a video to my iPad Pro on my DVD recorder via AV connection with adapter. Audio is fine, but no video on the screen

Which sector adapter are you using? The digital adapter AV output is digital, which is not compatible with analog VCR.

iOS: on adapters AV digital Apple

I've updated VIA / S3G UniChrome IGP plug-and-play reverse, but the update still no resolution 1600 x 1200 with the exception and others with the same ratio of 4 x 3.

I've updated VIA / S3G UniChrome IGP plug-and-play reverse, but the update still no resolution 1600 x 1200 with the exception and others with the same ratio of 4 x 3. That did not help.

Hello
1. What version of Windows are you using?
2. What is the brand and model of the computer?
I suggest to run the patch from the following link and check the status of the issue.

Hardware devices do not work or are not detected in Windows.

http://support.Microsoft.com/mats/hardware_device_problems/en-us

If the problem persists, I suggest you to send us more information to help you better.

HP8562A and NI GPIB-ENET/100

Hi, I would like to access my Analyzer of spectrum HP8562A from my computer using the NI GPIB-ENET/100 material. Is there a screw or drivers out there ready to achieve? I searched online and on ni.com, but I can't find them. Please help me. Thanks, Rocío-

What is available is a driver of the 8562E series

the two machines are agilent spectrumanalyzers but you will need to decide for yourself how they are of same familytree.

http://sine.NI.com/apps/UTF8/niid_web_display.model_page?p_model_id=2032

Bird fails via enet/100 with ELCK on all other attempts

Similar Questions

Maybe you are looking for