BitLocker in Vista 32 bit Ultimate activation is not possible on Tecra M4

Similar Questions

• Qosmio G55 - Q804 WIFI driver does not work with Vista 32 bit Ultimate

  I have Vista 32 bit Ultimate and everything is loaded and great job EXCEPT my internal WIFI adapter which is a unit of Intel.
  I would like to know if anyone else has handled this problem on this laptop? Is there something that I am missing?

  Why the driver of the habit?

  I'm an IT admin expert and have run many pieces of hardware in my life so I'm not at a loss to try different tricks and all of them have failed. If anyone can learn an old dog a new trick to get to this loading, I would be more apprciative.

  Thanks in advance

  Coogrrr

  Hello!

  Downloaded the latest driver and the Toshiba BIOS?

  Here you can download:
  http://www.CSD.Toshiba.com-online download-online mobile => Qosmio-G55-Q804 online

  Try with the new driver WLAN and the BIOS and if you have problems, make me know it.

  Good bye

• Toshiba Tempro does not work with Vista 64 bit Ultimate

  Why Toshiba Tempro don t works with windows vista 64 bit ultimate mey Satellite A300 - 1 l 4?

  Any idea where I can find a solution?

  Thank you very much

  Hello

  I m not very well why it doesn't work on Vista Ultimate, but to my knowledge, there are a few Vista Toshiba Utilities and tool that are not fully supported by Ultimate.

  But why you use Tempro? This tool reports only if a new driver has been transferred on the Toshiba driver page.
  OK, it's interesting to know that a new driver is available, but if your laptop runs without problem I wouldn't update or reinstall anything s!
  There is a proverb which says: never change a running system.

  Welcome them

• Is Vista 32 bit Ultimate OEM able to run Win 7 64-bit?

  I have Vista 32 bit ultimate OEM version.

  Buy just upgrading to the 64-bit Win 7 or because it's an OEM of Vista that I have to buy the version full version of Win 7 64 bit?

  Thank you

  N °

  There is no way to upgrade from 32 bit to 64 bit.

  32-bit to 64-bit should be done with a clean install, using a full operating system disk/license.

  http://TechNet.Microsoft.com/en-us/library/dd772579 (WS.10) .aspx

  Railways upgrade to Windows 7 at the link above.

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  Windows 7 Hardware/Software Compatibility Center.

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to / stationed there.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• By clicking on uninstall on Biz Vista 32 bit in Control Panel - not opening.

  By clicking on uninstall on Biz Vista 32 bit in Control Panel - not opening. No error message. Saw a mistake early on the osbaseln.dll not correct. Please help :) Try to install Windows 7 but recommended, I need to uninstall Windows Onecare. I'm unable to open the ' uninstall option.

  Try to download http://www.snapfiles.com/reviews/revo-uninstaller/revouninstaller.html Revo and uninstall the program using Revo uninstall Vista feature which doessn can't seem to work.  If it's only then you can move to Windows7 there is no real need try to find and correct the uninstall process if Revo works since that will be replaced when you upgrade.

  I hope this helps.

  Good lcul!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Zoo Tycoon 2 does not work on Vista 64 bit Ultimate

  When I start the game it gives an error saying that I have 0 MB of RAM installed.
  I also have a stub GPF.

  I tried to turn on DEP for all programs and added ZT.exe in exceptional cases.
  I edit "MSCONFIG" to show only 2 GB of ram.

  The issue of ram 0 MB goes, but I still I get a stub of protection error when I start the game.

  The thing is my old Zoo Tycoon 1 full collection works very well.
  ZT1 was released around 2001-2002. Whereas ZT2 came out around 2006.
  How can and more old-fashioned work fine but not the new version. I expect it to be the other way around.

  Someone at the helpdesk said MS the ZT2 game does not work on Vista 64 bit and I should install a virtual machine so that it can work in 32-bit.
  Is really the only way? Help, please.

  Hi orbit17,
   
  Thanks for posting on Microsoft Answers.
   
  Try to turn on DEP for "Windows programs and services only" and then restart the computer and check with the game.

  Here is a link to a KB which deals with the minimum requirements of the system and the compatibility problems with Zoo Tycoon 2: http://support.microsoft.com/default.aspx/kb/889368

  Please make sure that your computer meets the requirements for the game and that your computer is compatible

  Also how much RAM do you have installed on the computer?
  Did you add extra RAM since the purchase of the computer?

  You can also try to run the memory diagnostic tool by using the Windows Vista DVD.

  I hope this helps.
  Kind regards

  Niranjan | Microsoft Answers Support Engineer

• Vista 64 Bit Home Premium does not start when a disc is in the optical drive

  I tried to understand this for a long time, but I thought I might as well ask for help.  I use Vista 64 - bit Home Edition Premium and the problem I have is that I cannot restart my machine if a disc is in the optical drive. Specifically, if I have a DVD or Bluray disc in the optical drive (IE a BD - ROM drive). When I restart my computer and a disk is present, the startup process is going past the initial windows screen, but that's how far it goes. My desktop (I don't have a password to connect). Initially, I thought it was a matter of priority to boot but the boot process starts from the hard drive but stops at half way through. Then, I went into the BIOS and removed the optical drive completely from the boot priority list.  But there is no change in behavior. The process stops with the only thing visible on the splash screen is a black screen and the hard drive light flashes and goes out from time to time.  I use this computer as my Home Theater PC and sometimes I have to restart my machine when a movie DVD or a Bluray movie is in the optical drive. I would appreciate any response that can help me solve this problem...

  Thanks in advance...

  There may be something wrong with the files on your hard disk.  We will try to update to see if it helps:

  Do a startup repair, boot from the disk Installation of Windows Vista genuine (or one that you can borrow from someone) or a recovery disc.  Here is the procedure: http://www.bleepingcomputer.com/tutorials/tutorial148.html.  You may need to change the BIOS to do first the CD drive in the boot sequence to boot from the CD.  To do this, hold the screen that tells you the key F to push to enter the menu start or start of installation.  Push it quickly. Make the changes, save your work and exit.  Put the CD in the drive and reboot.  When you are prompted, press any key to boot from the CD.

  If you do not have a floppy disk, you can make a bootable recovery disk by using http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/ with burning software like: http://www.snapfiles.com/get/active-isoburner.html and, of course, a blank CD.

  If this does not resolve the problem, try the following:

  To run the Bootrec.exe tool, you must start Windows RE. To do this, follow these steps (I believe you need a disc for Installation of Vista to do that, even if some Installtion OEM disc might work, but probably not all the recovery discs).

  1. put the Windows Vista installation disc in the disc drive, and then start the computer.

  2. press a key when you are prompted.

  3. Select a language, a time, a currency, a keyboard or an input method, and then click Next.

  4. click on repair your computer.

  5. click on the operating system that you want to repair, and then click Next.

  6. in the System Recovery Options dialog box, click command prompt.

  7. type Bootrec.exe, and then press ENTER.

  Note If rebuilding the BCD does not resolve the startup problem, you can export and delete the BCD, and then run this option again. In doing so, you ensure that the BCD is completely rebuilt. To do this, type the following commands at the command prompt Windows RE:

  ·        bcdedit/export C:\BCD_Backup

  ·        c:

  ·        Boot CD

  ·        BCD attrib s h - r

  ·        Ren c:\boot\bcd BCD.old

  Bootrec /RebuildBcd

  If this does not work, or if you do not have the disk, try EasyBCD http://neosmart.net/dl.php?id=1 and see if that works and does everything well.  Make sure what you are doing or you could mess up your boot files and you'd be in a lot of trouble.

  I don't know if the problem is even caused by startup files (but it is possible if it is not the BIOS), but you'd better check and if the procedures are followed to the letter as stated there is no harm in trying.

  Good luck and I hope this helps!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Error code 5. My version of windows is Vista 64-bit. RegCure is not supported on this version of windows. How can I fix this error code 5?

  I tried to install a music software, but could not. The following error came. DeleteFile; code 5.
  I tried to use the solution for code 5, it did not work. Instead he informed me that RegCure is not
  supported on my version of windows. My version of windows is Vista 64-bit.

  Any solution out there?

  If you ever think your registry database must be cleaned, repaired, amplified, to the point, or optimized (it isn't), read http://aumha.net/viewtopic.php?t=28099 and draw your own conclusions. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I have a piece of test equipment that is not compatible with Windows Vista 64 - bit edition. Is it possible to go back to the 32-bit version without having to re - install?

  The test equipment is a Site Master S820D used for the test of microwave signals.  It is not compatible with Windows Vista 64-bit, but is with Windows Vista 32 - bit.  Want to know if there is a way to get back to Windows Vista 32-bit, without having to buy a new operating system.  The program is called "Site Master Handheld Software Tools".

  Hello

  If you want to move from a 32-bit version of Windows to a 64 bit version of Windows Vista, or vice versa, you will need to back up your files, then select custom during installation of Windows Vista. Next, you need to restore your files and reinstall your programs

  Use the links below.

  Installation and reinstallation of Windows Vista

  http://Windows.Microsoft.com/en-us/Windows-Vista/installing-and-reinstalling-Windows-Vista

  32-bit and 64-bit Windows: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/32-bit-and-64-bit-Windows-frequently-asked-questions

• Windows Vista 32-bit Windows Installer will not work. "Windows Installer are not available"

  I've seen other answers for it but when I go to my list of services. Windows Installer does not appear on the list of Services. Does anyone know how to fix this?

  I've seen other answers for it but when I go to my list of services. Windows Installer does not appear on the list of Services. Does anyone know how to fix this?

  extracted from:

  http://www.Winhelponline.com/blog/Vista-the-Windows-Installer-service-could-not-be-accessed/

  Difficulty in registration of Windows Installer

  If the steps above do not help, or if the Windows Installer service is not listed in the Services applet, follow these steps:

  1. Download msiserver.zip and save it to the desktop.
  2. Unzip the file and extract the msiserver.reg on the desktop.
  3. Right click on msiserver.reg and choose Merge.
  4. Click Yes when asked for confirmation.
  5. Restart Windows.

  Here is a tutorial from Microsoft Support. Have you tried this one?

  http://support.Microsoft.com/kb/2642495#top

• Added value to Toshiba VAP pack for Vista 64 bit Ultimate necessary

  Hello

  I need this program to work in my Vista Ultimate 64 bit, because the function keys above the keyboard, those who have the light does not work, and some windows features are not as.

  Help, please.

  Click on the Toshiba support site and you will find that it listed for some models of portable 64-bit support. I think you can use it even if it is listed for the other model of laptop.

• Cannot run Windows Update in Vista 64 bit Ultimate. Download popup that Windows Update cannot currently check the updates, because the service is not running.

  Windows Vista SP2 from worm 6.0.6002 Build 6002.  KB2675157 Explorer 9.0.8112.  Runing Norton 360 6.2.1.5 (I disabled the two virus checking a firewall).  My problem is that I ran Windows Update and go on a popup message: Windows Update cannot currently check the updates, because the service is not running.  I ran last update of Windows in April and he was properly executed.  I run FixIt 50202 and checked that wuauserv, misiserver, bits, cryptsvc, and workstation are started.  I am able to run updates on all the software outside of windows.  I ran recently updated for Radeon Catalyst Control Center, Safari, Chrome, and various Adobe products.  I don't have another PC with Vista I can compare the registry entries.

  Hello

  Method 1: The problem with Microsoft Windows Update is not working: http://support.microsoft.com/mats/windows_update/

  Method 2: Try to reset the Windows update components and check to see if the same problem happens: http://support.microsoft.com/kb/971058

  Method 3 :

  Try to set up your computer in a clean boot state, and then check to see if the same problem occurs.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

   

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Hope this information is useful.

• My dell xps m1730 with vista 32-bit Ultimate edition knocks out any home wireless network (for all other portable) trying to connect

  When you try to connect to the home network.

  Thanks in advance for your help.
  Abel

  Hello

  Temporarily disable the security software and check if it makes a difference.

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  See also: http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-network-connection-problems

• Windows Vista 32 - bit Ultimate Edition

  Recently purchased and installed an Epson SX515W all-in-one printer.

  Kepp getting a pop-up card stating: "could not reconnect all network drives.

  While they inspected the status, MEMORYCARD (\\epson087ab0) (z) of a red cross next to it.

  Z: open, message reads as follows: "year error occurred while reconnecting Z:.» The network path was not found. This connection has not been restored. "

  However, while they inspected the performance of the printers, everything works well--in all aspects.

  I had to consult the technical support of Epson and was told that there was nothing they could do about the problem, because the printer works well. and suggested I contacted Microsoft.

  Is this something that Microsoft can solve?

  Thank you, Lindsay

  This printer has the facility for its reader of memory cards available from the computer. This seems to be the problem.

  Have you changed the way in which the printer is connected wireless USB? If it's on a network, have you changed the network somehow.

  Here you can find additional documents:

  http://www.Epson.co.UK/store/printers-and-all-in-ones/Epson-Stylus-SX515W/drivers-support

  To stop messages, you can use this procedure:

  1. Click on the computer
  2. Press Alt to reveal the Tools menu
  3. Click on the Tools menu
  4. Click disconnect a network drive
  5. Click the Z: drive
  6. Click OK

• Try refomat Pavilion dv6 Vista 64-bit. C: format not available

  It has been a year since I have my Pavilion dv6.  It's a little slow and I want a new installation of Windows 7 64-bit.  All my data is stored on external hard drive.

  I have my recovery disk ready to go.  When I right click on "C:" in the management of the computer, it won't let me choose 'Format '.  It is just gray.

  How to reformat my C:?

  Yes, my laptop has a recovery partiion (D I understand that I must leave in tact.)

  Advice on getting this format complete?

  Hello

  Since you still have the recovery partition, use Restore Factory is a better option because formatting OS drive is not the same as the format or other readers. Please back up all your data/files first.

  To set your PC/laptop to the factory settings, restart the PC/laptop. At HP Home screen has reached repeatly F11 (or ESC) key to start the recovery process. Follow the instructions on the screen.

  Kind regards.