Bitmap text point

Hello guys '

I have little problem. It is: I created BitmapField and then added scree.

------------------------------------------

_bitmapScreen = new BitmapField();
           
verMngr.add (_bitmapScreen);
horMngr.add (verMngr);

------------------------------------------

Then load image JPG to BitmapField. It works.

Image bitmap bitmap = createImage (data);

data are massive byte: byte data [];

Graphics graphics = new Graphics (bitmap);

int xOffset = (logo.getWidth () - Font.getDefault () .getAdvance (logoString)) / 2;

int decalage_y = (logo.getHeight () - Font.getDefault () .getHeight ()) / 2;

graphics.setColor (Color.WHITE);

graphics.drawText ("TEXT" x_offset, decalage_y);

Finally:

_mapScreen._bitmapScreen.setBitmap (bitmap); This line doesn't work well?

I think that printing text 'TEXT' on bitmapField. But he does not draw the text.

Is there a solution? Guy

TNX

TNX a lot ' guys, I found my mistake.

Tags: BlackBerry Developers

Similar Questions

  • How to clear the bitmap selected point

    Hello

    I have two bitmaps and bit1, bit2 with bit2 bit1 overlapping.

    I want to know how I can erase part of bit2 bit1 gets expose them in this area?

    the region would be selected by the user using the key.

    This is exactly opposite of signature capture. Instaead of cover bitmap with our sign, I would like to have exposed below bitmap where we touch.

    Thank you

    Afonso Tyagi

    It's done!

    I made it myself

  • Add text pointing to the PivotTable

    All,

    Is it possible to add text to a column header hover in a PivotTable? Specifically, I would like to add the value of columns other than the hover text in the column header. Is this possible?

    Thank you.

    Hover text is possible with static text, but your condition is not possible to display the value except if coded its hard

  • Text selection pointer is not visible in Windows Vista

    Original title: Mr

    Recently, the "Select text" pointer has become virtually invisible, because it became almost exactly the same color as the background. It becomes visible when it passes over the text on the screen. The problem affects only the pointer "Select text": other pointers such as "select Normal ' are not affected and remain clearly visible. The pointer only "disappears" when you move the cursor on a 'text' of the screen area.

    I have no idea what has caused this and cannot find how to remedy. Can someone tell me how to solve this please?

    Try to change the system pointer in the mouse control panel:
    Go to control panel-> double click on the mouse-> in the mouse properties box, click on on the "Pointers" tab-> sub select "Schéma" a different pattern and check, you can then return to the previous regime if you want.

  • Police base / positioning of the text of point vs box

    For some stupid reason too long to address here, I place some point text in the same place, as it would be placed if it was in text box.

    However, it appears in the text box is positioned compared to the 'first line' of the police, while the sharp text is positioned (anchored) from the baseline of the text, see the next with the same position sample model:

    0ajyv52.png

    What I've done here is just first create "mypoint" by clicking on (0,0) and paste the text ' "(which contains characters that show the level of reference and full height also), and create the text box"mybox"set by draw a text box to (0,0) to (1 000 100) and paste the same text and by changing the colors to make them recognizable.

    I then just added a rule to y = 100, added an adjustment layer and it value parent of these two layers, then shift the position of the adjustment layer - 100 so I can see what is happening.

    Now the question is, how to calculate what "mypoint" position would be to align on the same alignment of Y-position that the text "mybox" is?

    Just for the inspection of a few things:

    ylI9uVr.png

    Looking at the returned rectangles sourceRectAtTime() I get something in the general direction of the following, but he is not quite right:

    1CDsCSW.png

    model var = app.project.activeItem;

    var b = comp.layer ("mybox");

    var p = comp.layer ("mypoint");

    BR var = p.sourceRectAtTime (0, false);

    PR var = b.sourceRectAtTime (0, false);

    var text = p.sourceText.value; copy settings

    var t2 = comp.layers.addText (text);

    text = t2.sourceText.value;

    text.applyColor = true;

    text.fillColor = [0,1,1]; cyan to differentiate

    T2.sourceText.SetValue (Text);

    T2. Name = "myotherpoint";

    T2.parent = comp.layer("adjust-y");

    T2.position.SetValue ([0, 0]); gives the same position as "mypoint".

    T2.position.SetValue ([0, br.top - pr.top]) / / slightly off

    T2.position.SetValue ([0, text.fontSize]) / / No, too low

    Is it a reasonable way of calculation and this... ?

    I tried to add a point text and to match a text box, with a code similar to yours, and it works.

    However I have no parent the text point to layer "settle there" (because you said nothing on the subject), but directly in the text of the box.

    Start-ups can come from your transformation parameters to "settle there" layer. Maybe reset?

    I used this code:

    var comp = app.project.activeItem;
    var b = comp.layer("mybox");
    var br = b.sourceRectAtTime(0, false);
    
    var p = comp.layers.addText(b.text.sourceText.value.text);
    p.name = "mypoint";
    // make same doc specs (skipped)
    var pr = p.sourceRectAtTime(0, false);
    
    // parent, then set relative position
    p.parent = b;
    p.transform.position.setValue([br.left-pr.left, br.top-pr.top, 0]);
    

    Xavier

    Edit: just realized that 'set the y' is on your screen, and it is the parent of all the layers...

    I don't have a lot of time to understand why your code does not work, but if you parent the point of the box instead of the box parent, then it should work.

  • Text (no anti-alias) bitmap

    It ' possible in Actionscript 3 using a font ("Regular Communication", 8 - http://pixelfonts.style-force.net/download/munica-regular/) without anti-aliasing?

    I joined the police:
    {@font-face}
    SRC:local("munica_Regular"); also valid sr:url("MUNIRG__._«) ""TTF");
    fontFamily: municaRegular;
    }

    then,

    tfHeader = new TextFormat();
    tfHeader.font = "municaRegular";
    tfHeader.color = 0xFFFFFF;
    tfHeader.size = 8;

    var myText:TextField = new TextField();
    myText.embedFonts = true;
    myText.defaultTextFormat = tfHeader;
    myText.text = "My police incorporated";

    Everything works fine but the rendering seems so blurry (aliated).
    I tried with "Advanced" = antiAliasType and gridFitType value, but nothing important.
    It is possible to say ' use the bitmap text and do not apply anti-aliasing? antiAliasEnabled = false?
    Thank you
    g

    OK, I found the happy by myself.
    The problem was the position of the textfield object. With Pixel fonts TextField (maybe not only?) must be posizioned in an integer x and coordinate.
    Thank you

  • How to change the color of selected text-setting to default value

    Hello
    I'm WORD 2007 documents on a LCD Dell monitor display. Selected-text-point color highlight default appears as a light blue barely visible.

    I would like to change this color to something more visible, especially when I do a SEARCH/REPLACE, maybe even a bright yellow.

    Can someone tell me the ability to change the select text color by default?

    Thanks in advance,
    David

    Ah, I think I understand now.

    Try that and see if it's what you want

    Right-click on properties/Desktop

    On the appearance tab click the Advanced button

    To the title of the item change the color of the "selected items".

    .

  • Text in a line ListField

    After not having all the answers in this thread: http://supportforums.blackberry.com/rim/board/message?board.id=java_dev&thread.id=17423

    I thought I could try to use a ListField as a last resort, because, if you read the thread linked above, it seems that 4.2.1 has a bug where it will not change the background color of the Manager even if the word is invalid.

    However, I am having a hard time finding how I would wrap the text in a line ListField.  What I do is the following:

    [Bitmap] [Text text text text] [Bitmap]

    -[Text text text text]

    [Bitmap] [Text text text text] [Bitmap]

    -[Text text text text]

    [Bitmap] [Text text text text] [Bitmap]

    -[Text text text text]

    (Where '-' is just the space).

    I pray that I won't have to loop through the words in my channel and would be responsible for calculating the width each line wrapped.  I don't think also drawText with the style of the ellipse is suitable.

    Advice would be greatly appreciated.

    If anyone has the same problem, I came across this great piece of code: http://pastie.org/282759/wrap

  • Cannot copy - paste text of Mac Notes App Photoshop

    Hey guys,.

    can't copy - paste text from the Mac App Notes into a Photoshop Document. I tried:

    new point of text-> paste. nothing is got stuck

    new text of paragraph-> paste. nothing.

    existing text (point and point)-> paste. nothing.

    Other applications such as TextEdit or Word seem to work well...

    Someone at - it had the same problem or has a solution for this?

    best/tia

    SEB

    It works on my Mac 10.11.2/CC 2015.1

    I can select/copy/paste of Notes.app on a text layer, but it does not keep the formatting.

    As for why it works on mine and not yours, I can't say.

  • Why are the subtitles text highlights not appearing does not correctly?

    Several letters of the text point to see the place very well, but some letters get cut and are not highlighted at all. I've attached screenshots to show what I mean. Highlights fine during programming in yet, but the Preview Panel and DVD display differently. No idea why this is happening?

    -Scott

    Screen Shot 2015-09-02 at 6.15.58 PM.png

    Screen Shot 2015-09-02 at 6.16.33 PM.png

    Screen Shot 2015-09-02 at 6.16.46 PM.png

    In some cases, by placing the close buttons on the results of edge in these problems. It is most often a problem with thin lines, and I don't know if this is your problem or not.

    Also, using the non standard sizes or leave (for the menu psd himself) can create problems. Check your menu and nominal size in photoshop.

    Edit: I found my note on it. My speculation was that measures the position of the highlight of the edge of the frame and that sizes pixel standard or parts still in training place the nail improperly. And the bounding box of the part of masks (i.e. will interrupt) button all of the highlights. As in my previous experiences, the part of the highlights missing is far from the edge of the frame, which seemed strange, but maybe not.

  • Change text entry

    Sorry, didn't know anything to call it.  I had, After Effects, several years ago and it has

    sitting on my computer for years. I have just retired and have dusted off and try

    to learn it. So far, I didn't problems after checking the youtube help. But it isn't

    a very simple question that do not include people in their videos. I have a created a draft text.

    I entered the text I want to use. Now, I want to reposition text.  However, I can't because

    the cursor is always showing the 'text' tool whenever I try to do something with the text that I have

    have created, he tries to add more layers of text. So, how do a gesture and the text tool

    tool?   I use CS3. (I told you I got it for many years)  I know it's a simple question

    with a simple answer, but I can not understand. Thank you.

    That's the answer using After Effects:

    Adobe After Effects * Enter text point

  • Source text generated by current value - Expression?

    I write an expression to control the sourceText of a text layer based on the length of another layer of text. Part of the feature is to only update the current text of the layer, if there is a pretty big change in length.  Is there a way to access the current value of the text layer that was generated by the expression? value and sourceText.text pointing to the text on the text layer, not the generated layer. 

    Here's my expression

     function calc(prevValue) {
      var textLength = thisComp.layer(1).text.sourceText.length;
      var perc = thisComp.layer(2).text.animator("Animator 1").selector("Range Selector 1").start;
    
      var newValue = 140 - Math.floor(textLength * perc / 100);
      return (parseInt(prevValue) - newValue) < 10 ? prevValue : newValue;
    }
    
    //Need to pass the previously generated text value here...how do you access it?
    calc(text.sourceText);
    
    
    
    

    Could not find any way to access in the expression references.

    Thoughts?

    Calvin

    I think it's one of those cases where you will need to loop through all the previous images to restore the value of the expression + through the previous image.

    Dan.

  • How to disable the current point when validate trigger

    Hi all
    I want to disable the current text point when validate trigger.

    Generally, we rely on WHEN-VALIDATE when the cursor leaves a field. In this case, because the cursor leaves the ground, why are you trying to turn it off at this point? The other time would be during the validation process. In this case, you should be able to disable during the WE-COMMIT or in a VALIDATION KEY.

    I guess if we understood better what you want to accomplish and why you want to do, we could offer something more useful.

  • What trigger so I put on a text element?

    What trigger should I put on a text element so that when the cursor comes inside...
    mouse or keyboard, it should automatically display the value I put inside the trigger.

    I tried both click-mouse-when and when-validate-item, but Don ' know is why wheen I press the tab key and when the cursor comes within the text element, it does not show the value.
    When I click on the text element and then the value, appears.

    Published by: 831050 on February 2, 2011 13:10

    831050 wrote:
    Hello
    What is the differnce n/b pre-text-point and a time new point instance?

    Well you can find the description of each trigger in using the form and notes of use also.

    the two solve my problem... I should choose one which and why?

    After reading the help you can get better idea one you should use. But for you the situation mention you both should work.

    should what trigger I put if I want that the user cannot type a different value in the text element.

    You can use the trigger above and use the code something like this...

    SET_ITEM_PROPERTY('ITEM_NAME',INSERT_ALLOWED,PROPERTY_TRUE);
    SET_ITEM_PROPERTY('ITEM_NAME',UPDATE_ALLOWED,PROPERTY_TRUE);
    :ITEM_NAME:='Any Value';
    SET_ITEM_PROPERTY('ITEM_NAME',UPDATE_ALLOWED,PROPERTY_FALSE);
    SET_ITEM_PROPERTY('ITEM_NAME',INSERT_ALLOWED,PROPERTY_FALSE);
    

    -Clément

  • How do to "BOLD" in the first line of text on a number of sections of text at a time

    CS5 using (but we have CS5

    .5 available) we will create a business directory. Each page has columns of type

    business listings with the company name on top, under this address under this phone, etc.  Each ad is separated

    by a single line. There are thousands of ads, and we need to "BOLD" in the top line of each. How can do us

    without making them individually?

    Each line a paragraph, or each list a paragraph with soft returns (forced line breaks)?

    It's very simple and basic in both cases an operation. It is especially easy if each ad has the same number of lines, so we will focus first with this case.

    Each line should be a separate paragraph. If you have 4 lines, as your example, you might want to mention their name, street, city, and phone. You can and should, all the styles that will be similar in appearance on the same basic model and change only the atrributes that are different, so, for example, if all lines use the same font, many use the same size and weight and only the top line is different and only by being "BOLD" and or larger size start by defining the street, then city and phone based Street and you don't need to define something more than the next Style, I'll get to in a second.

    For topics, set name based as well on the street, but change the font characters. Now all the features of the basic fonts can be changed in one place, the definition of the style Stree.

    Since you have the same number of lines in each list, you can set up a loop "next style". For name, style next street is, the street is the city, for the city it is the phone and is name for the phone. You will also need to toe after the add space in the name, or space on the phone to book spaces registration and you probably also consider to assign everything except phone keep with the next line to prevent a list from breaking across a page or column break. If currently you have blank lines as separators (empty paragraphs), get rid of them. There are change queries find already registered in ID that will do that.

    Once the text is in place and the styles are defined, you can select all, then right click on the style name in the paragraph Styles Panel and choose apply following Style and name. Reformatted your entire list. IT IS CRITICAL in this method that the structure of each list is identical, and if there are no empty lines between the lists.

    If each line is a paragraph, but there is line different counts, you will probably reach with just two styles, one for the headings oand one for everything else, but the beat of following style will not work. If there is something unique that appears in all the headings you can use find/replace to make search and reformat in shape, but I suspect that this will not be the case on in the real world, there will be a manual work involved.

    Where a lisitn is a single paragraph, line break forced (which is better suited to the case of an uneven lines by registration number) you can define a character style nested to be applied by means of a line break forced to make the first line "BOLD", red or any other thing you want.

    At this point, you are probbly, noting that a bit before planningn is a good idea when you do a directory so that your ads have some sort of coherent structure that allows for automation. I have no idea whre that your text is coming from or how it is done in the code. If it can be established as a .csv or a tab-delimited text file, you can use data merge to fill a file based on a model of merge (i.e., how to build directories for my clients who need). You can set styles in the model to each field or paragraph that contains several fields, and merge data will remove empty lines if all row fields are null and there is no punctuation or whitespace on the line.

    A multiple records per page fusion will give you individual blocks of text for each record, and you can, if you wish, thread them using the script text point of Rorohiko.com.

Maybe you are looking for