Biz & HP Home

Similar Questions

• Adding HP ePrint home and Biz iPhone app - mal printer cannot find the email address of the printer

  I'm trying to connect my HP Photosmart c6380 to my iPhone. I have already downloaded the app and my printer is connected to my wireless network, as is my iPhone, but I can't add my printer to the app.

  When I go to 'Manage ePrinters' and try to add a printer with the + button I see 3 choices:

  Add x to list: "no available ePrinters.

  Manually add: I can't find the printer even email address using the instructions available on the ePrint centre.

  Add the WiFi network: my printer is not shown in this list, so it does not support Autodiscover.

  So I guess that if I could just find email address of my printer that would connect to my iPhone for wireless printing, but I can't for the life of me find.

  Any help is greatly appreciated.

  Thank you.

  Hello amybett,

  I have bad news and good news. The bad news is that your printer is not Airprint/ePrint capable. However, the good news is that with the HP ePrint capable home and Biz iPhone app, it didn't need to be Airprint/Eprint, as it is connected to the same network as your phone.

  Here are the steps that you want to print something:

  1. installation of the application by filling in the electronic registration and entering the code (which I believe you have).

  2. Select the item you want to print by using the menu in the application (Photo Albums, files saved, Web browser, etc.).

  3. Once you select the item, you should see article and a big button "Print" under him.

  4. If the printer you want to print to is not listed above the 'Print' button, select the icon on the right (key/computer), and then select the printer you want to use (and other parameters).

  5. press the button 'Back' at the top left, then tap "Done" (blue top-right button) and then press the 'Print' button to print your article.

  Let me know if you still have problems after following the guide above.

• Malfunction in HP Home & Biz: only first start translates into an impression

  Printer: HP LaserJet CP1515n

  Material: iPad 3, iPhone 4 (both iOS 5.1)

  Software: HP Home & Biz 4.1

  First the good stuff: fine everything seems if I print directly from home & Biz (Png, Jpg, PDF). Top to bottom, from left to right all very well.

  The bad thing and why I post:

  1. I received the email with an attachment, e.g. PDF.

  2A. I opened the PDF and open the PDF file in home & Biz (First Start, App) closed.

  3. The PDF is displayed. I opened the preview before printing.

  4A. is my printer and the status light is GREEN.

  5a. I could print. I am happy

  2B. I opened the PDF and open the PDF file in home & Biz (already open App and another document has been posted and printed before).

  3B. The PDF is displayed. I opened the preview before printing.

  4B. is my printer and the indicator light is RED.

  5 b. I couldn't print.

  Question: why I could only print if first closed the HP Home & Biz app?

  Thank you for helping me.

  I'm sorry this isn't the problem.
  On the German Board which solved the problem.

  Solution: my printer is not soustenans and I can Feeling Lucky that I can print.

• I have a DeskJet 6940 and it's on the list for HP ePrint home & Biz, but I can't find his e-mail.

  I have a DeskJet 6940 and it's on the list for HP ePrint home & Biz, but I can't find his e-mail.

  http://support.HP.com/us-en/document/c03722645

  I looked at the page Web of LAN of the printer and the Win 7 64 bit print test page and none of them give me an e-mail that I can use to implement.

  sureshotnj,

  With this particular Deskjet, you won't have to add it. The application will automatically search and find all capable printers.

  You can select the Photos section, select a photo, and then see if your printer is auto-découvert on the bottom in the center of the application when you view your selected photo.

• * Important Information for ePrint home & Biz users on iPhone/iPod/iPad

  If you are a current user of the ePrint home & Biz application or try to locate it on the app store, it has recently been renamed with an update. The app is now named HP ePrint.

  The update added the ability to add your e-mail account in the application to print e-mail messages directly from the app.

  Searching for printers supported has been removed. The only option for scanning on Apple devices now is HP Printer Control app. Unfortunately this app only works with printers 2010 models.

  Note also, as now, the Android version is still named the EPrint home & Biz.

• HP ePrint home & Biz do not find Business Inkjet 1200 on wireless network

  I'm trying to set up printing from my phone on my local network to an HP printer.

  I downloaded the HP ePrint home & Biz app on a Samsung SII runningAndroid v4.0.4 the application can't find the HP Business Inkjet 1200 (C8156A) on the wireless network.

  (1) the printer is functional and other devices will be able to be printed on it

  (2) the phone is able to conect wireless to the printer via a browser connection

  (3) the printer is on a fixed IP number

  (4) the BI 1200 is listed in the models supported for application ePrint home & Biz

  (5) I saw the app with ePrint, but should be able to connect via the wireless local area network

  I tried to use the option connect manually, but it is tring to get me to provide an ePrint e-mail address. What I really need to save the ePrint printer to get this app to work?

  As someone said why not have an app that is shaped just print job and send it to the local printer?

  Zinoune

  There are...

  Use Google Chrome cloud printing.

  He needs a PC/laptop on the network with chrome running, but then, you can print on ANY printer that the PC has installed (including the file print and OneNote). There is a bit of lag, while it is sinking upwards to the cloud and back, but it installs and works first time contrary to, um, other applications.

  Zinoune

• HP Home & Biz auf nach update HP ePrint - Zugriff auf ohne iOS5 scan? Alte scans Debby?

  Ich bin mir sicher nicht, ob ich das gut finde: Fast eine Woche konnte ich ein HP ePrint-implementation to date nicht installieren, weil ich die gleichnamige APP was removed. Are keep geht heute, die aber of removed HP Home & Biz - env. What: alle nicht gesicherten Scans sind weg und auf den Scanner kann ich nicht mehr vom iOS-Gerät zugreifen. Voll:-((correct, auf zur Arbeit und den netten Kollegen!) Blod  :-)

  Thanks for translate with google. I'll look for the recommended application and try again. Have a good weekend, Andreas

• HP Laserjet Pro M1217nfw, in-home ePrint & Biz on Android devices

  Got my new LaserJet Pro M1217nfw installed on my home (secure) wireless network and am 3 laptops wireless printing windows.

  Started trying to get my smartphones to connect and print. Verizon droid X, Verizon update running last gingerbread. Download ePrint and ePrint home & Biz to him. Updated my printer to the latest firmware and SmartInstall, got an e-mail address EPrint are entrusted to him. Am able to ePrint phone just fine, but home & Biz does not print, it detects the printer and said has printed the file, doc or pic, but nothing comes out on the printer. I see your list of printers is not supported

  supported on th 1217nfw. He plans to work on it in the future? Can give you my some advice or workarounds if it is possible to return home and Biz to work?

  I tried the service wirelessly directly on the printer, but don't really understand its purpose, as my phone and printer are both

  connected to my local wireless network, why live wireless using a different SSID and assign an IP fixed?

  in any case disabled this feature.

  Thanks for any help!

  Since both printers are capable ePrint and wireless printers, it is possible to print from your Android phone.

  To do this make sure that your printer and your phone are both connected to the network. Download and install the free ePrint home & Biz application from the Android market.

  If you have followed the manual above, it should be a quick process to be able to print from your phone.

  However, if you're having trouble feel free to call online services ePrint at 855-785-2777.

  I hope this helps!

• Home ePrint & Biz uses wrong tray when not the network printer

  Hello

  I recently purchashed a 7520 Photosmart e-all-in-one printer for my mother-in-law. While at home, on its network, we tested using the home & Biz application for android to send photos to the printer.  The app worked great and was able to use the tray photo 4 x 6 for the photos sent to it.  Unfortunately, when we were out of its WiFi all the images we sent used instead a regular sheet from the normal paper tray.  It's frustrating because the app allows you to select the paper tray, even when we are not on its network, but my selection is apparently ignored.  Send an attachment to a computer at the address of the printer eprint also don't have not selected the correct tray.

  Is there a setting I'm missing somewhere or is this a bug that I have to live with?  So, it defeats the purpose to buy this printer so that we can send photos of 1200 miles away.  Help, please.

  Calvin

  Hey I've referenced a post that would explain your problem.  I hope this helps.

• iPad app HP Home/Biz

  Hi just tried to use the iPad app sweep feature. He found fine document, but when clicking on scan I get an error message ' a problem occurred when scanning, please check your scanner and try again.

  I have the HP Photosmart Premium C310 series printer. I don't understand why if the preview feature works the scan isn't.

  Help, please.

  Thanks for the reply, I have solved the problem and I forgot to post back. I run an update on my HP printer and after that it worked fine.

• with hp eprint home & biz app.

  How can I remove attachments that are numbered from the queue after I print them?  Thanks for your help.

  I'm afraid there is no way to remove documents from this list. You may be able to uninstall and reinstall the application. Who can clear the list, but I can't say for sure. I'm sorry.

• How do install on my PC at home that uses Windows XP SP3 to connect to the WiFi 802.11 g/n wireless driver?

  Hi, I desperately need help to connect my PC at home that runs on Windows XP SP3 to my Wifi network. Currently my laptop (Windows 8) and the tablet of my wife are connected to the WIFI network but cannot connect the desktop home PC. Did some research and discovered that the driver wireless 802.11 g/n is missing from the network adapter in the Device Manager. I suspect that this as being the cause of the non-connectivite but how do I download and install this driver wireless to the computer?

  Can you please provide me with the simple steps to follow for installing this driver wireless 802.11 g?

  Emergency response required by the circumstances.

  See you soon

  Robin Wavite

  Robin,

  It's the support page from Dell for your computer--> http://www.dell.com/support/my-support/us/en/04/product-support/servicetag/JHDFR1S/config?s=BIZ

  As near as I know, your Optiplex was conducted in Australia.  If you are indeed in Australia (and you probably, if you have a modem/router of Telstra), I have no information on what products could be made available to you or where you could buy them.

  My personal preference would be an adapter that includes a cable for the antenna is not positioned between the back of your computer and the wall.  However, if your computer will be less a few meters from the router, there is not much difference, and you can use an adapter that looks like a USB key (or smaller).  My guess is that all of the products on this page might work for you--> http://www.mwave.com.au/networking-wireless/adapters-addon-cards-wireless?view=40&pricerangeid=1&filter=383%3Dusb&filteroptions=383%3Dinterface that the correct driver should be included on a CD supplied with the appliance.

• Unable to create directory/home/oracle/app/oraInventory

  When installing OEM Cloud user oraoem control, there is always an error even if this user oraoem belongs to oinstall.

  NEWS: 19 10/15 2:46:11 PM CDT: * noncorepluginIDs plugins: [Apache Tomcat, Bay EMC CLARiiON storage EMC Celerra, EMC Symmetrix Array, Exalogic Elastic Cloud Infrastructure, IBM DB2 Database, Microsoft .net Framework, Microsoft Active Directory, Microsoft Biz Talk Server, Microsoft IIS, Microsoft SQLServer Database, Oracle Audit Vault, Oracle Audit Vault and firewall database, Oracle Big Data Appliance, Oracle Cloud Application] [, planning of peacebuilding rebilling Oracle of engineering system Healthchecks, Oracle Fusion Applications, Oracle Siebel, Oracle storage management framework, Oracle Virtual Infrastructure, Oracle, Oracle virtualization, virtual networks and Oracle Sybase ASE database, zero data loss recovery device]

  NEWS: 19 10/15 2:46:11 PM CDT: get the default inventory of default invPtrLoc location: ' / etc/oraInst.loc '

  NEWS: 19 10/15 2:46:11 PM CDT: definition of the location of the default inventory: ' / home/oracle/app/oraInventory.

  NEWS: 19 10/15 2:46:11 PM CDT: * new selected installation *.

  NEWS: 19 10/15 2:46:11 PM CDT: load the XML validation+++/home/oraoem/softw//install/em/validateXmls//noseed_validate.xml

  NEWS: 19 10/15 2:46:35 PM CDT: * updates *.

  NEWS: 19 10/15 2:46:47 PM CDT: metalink option download is seletced.

  NEWS: 19 10/15 2:46:47 PM CDT: all fields are valid

  NEWS: 19 10/15 2:46:47 PM CDT: * Oracle inventory *.

  NEWS: 19 10/15 2:46:57 PM CDT: validate the variable: INVENTORY_LOCATION

  NEWS: 19 10/15 2:46:57 PM CDT: unable to create directory/home/oracle/app/oraInventory. You may not have the appropriate permissions to create the directory or there is no space left in the volume.

  19/10/15 2:46:57 PM CDT: error: / home/oracle/app/oraInventory specify a location of the inventory with write permissions.

  NEWS: 19 10/15 2:54:38 PM CDT: validate the variable: INVENTORY_LOCATION

  NEWS: 19 10/15 2:54:38 PM CDT: unable to create directory/home/oracle/app/oraInventory. You may not have the appropriate permissions to create the directory or there is no space left in the volume.

  19/10/15 2:54:38 PM CDT: error: / home/oracle/app/oraInventory specify a location of the inventory with write permissions.

  NEWS: 19 10/15 4:09:28 PM CDT: POPUP of WARNING: do you really want to leave?

  NEWS: 19 10/15 4:09:30 PM CDT: eliminate the object box to install controls

  NEWS: 19 10/15 4:09:30 PM CDT: update to STATE_CLEAN state machine

  NEWS: 19 10/15 2:46:57 PM CDT: validate the variable: INVENTORY_LOCATION

  NEWS: 19 10/15 2:46:57 PM CDT: unable to create directory/home/oracle/app/oraInventory. You may not have the appropriate permissions to create the directory or there is no space left in the volume.

  19/10/15 2:46:57 PM CDT: error: / home/oracle/app/oraInventory specify a location of the inventory with write permissions.

  If the directory/home/oracle/app/oraInventory does not close, can you test to see if you can create it manually using the oraoem OS account. If it already exists, try to create a subdirectory under it to avoid any problem of permission or space.

  Kind regards

  -Loc

• Cannot restart or refresh my iPhone 7 from the "home" button and the sleep/wake button at the same time

  I'm having difficulty trying to restart and update my iPhone 7 using the Home button and the sleep/wake button at the same time, when I do my phone takes a screenshot of the home screen.

  Should I turn off my Touch ID?

  Basically my home button button and / standby works not together at the same time.

  You need hold the House and turn off the button for 20 seconds, until the Apple logo appears.

• iPhone 5 home button does not work after ios 10

  My 5 Iphone Home button does not work after update final IOS version of 10.

  The home button works on the first push to wake the phone but it will not open the phone the second button.

  I activated the assist button, which does not work either. But what I discover is if I open device for assistance then touch and lock screen click on the button home will work once to open the phone. If I open any app I can't close it unless I go through the same routine.

  You attempted to restart your phone?

  You can do so by holding the sleep/wake button and the Home button simultaneously until the Apple logo appears