Black and white display problem

Similar Questions

• Tecra A3: TV - black and white display

  I have a Tecra A3, which I tried to connect to a TV via the S-video connection. Works, but the TV picture is black and white.

  I tried to change the Graphics Options without result. These are currently on:
  Colors: True color.
  Screen area: 1024 x 768
  Video Standard PAL-B

  Everyone you have any other suggestions?
  Thank you.

  Hello

  This unit has a S-video out. If your TV has only video then you will get only a black and white screen.
  To get a color screen, you have a TV with S-video
  Also, check if the TV works correctly with the standard NTSC video.

  Good bye

• Vista for admin is displayed in black and white, safe mode he color__How can I solve this?

  It's for my computer vista laptop professional 32-bit, I run, I have a NVIDIA Geforce 9600 M GT video card, which displays its colors very well in safe mode which I am right now.

  I tried to update the driver, and it shows that I have the latest updated driver for my card, which I doubt has problems because safe mode clearly shows the colors. I tried in the admin change all aspects of the display to check if, somehow, it shows color without result.

  I have not change anything until the problem happens, the last action I did before putting it in black and white, was admin log, and put the computer in mode "Eve". I tried to access low and high graphic games after the problem, and the low graphic games can be played in black and white, while the high graphic games are not. They display an error on x-ray engine which I assume is due to the lack of color on the screen.

  I also tried a system restore, but it failed because all the 3 times, he showed that nothing has changed for the restoration of the system has failed.

  I hope this is enough information to troubleshoot. (I restarted and tried to update and even downloaded program Mr. Fix It Microsoft and unsuccessfully yet.)

  PLS, help

  It wasn't her, but I managed to solve the problem but another way. Believe it or not, under the digital vibrance I just had it higher than before, but the strange thing is that I never played with this setting under my nvidia Control Panel. Another is that whenever I have a graphic problem with my theme (which is three times since I increased the digital vibrance), it turns black and white display before they change.

  I think that maybe it won't be a temporary solution, because I can not find the reason for the error of digital vibrance begin wth or as to why the screen goes black and white when my theme does not appear himself.

  But thanks to try it regardless, but this isn't the high contrast setting. Become text and th white black screen, rather mycomputer transformed into black and white way somewhat.

• Tecra A6-EZ6411 - video photo is shrivelled and black and white

  After a recent update to Windows 7 I have a problem with the display of images in the Windows image viewer and watch netflix videos. I can look and onto my computer without problem. I can also display an image in paint.net or any other picture watching a program. I can watch Hulu or any other site of company of cable without problem. What is happening is that the image is overwritten and made black and white.

  So the first thing I tried was uninstall silverlight and then put it back. The next thing I tried was start in basic mode, uninstall all nvidia drivers, then reinstall the latest driver available. None of those corrected these problems. Strange thing is when I first start in basic mode and the resolution is 640 X 480 photos appeared normal in the Windows image viewer and when I try to watch a video on netflix seems normal. Only when I change the resolution to anything else he revert to the old diplay of a black and white display shrunk.

  Hey,.

  You have the same problem with the version preinstalled Windows from Toshiba or did he only because you have upgraded to Windows 7?

  I mean if it works with the screen resolution of 640 x 480, it could be the graphics card to malfunction but a problem of driver too so much easier is to install original Windows of the Toshiba recovery disc and it tests again.
  ?

• When Vista (Home premium) end its commissioning, my switches in black and white color scheme. I can't go back to the color. I looked at the display settings and they say all in colour, however, I am always shows black and white.

  Color screen is permenantly black and white. cannot change color and all the display settings are in color. Monitor is always on the color, its just something that vista went to. At the start of vista, it's after start of switches in black and white and color. I can't see where it get back to normal.

  Hi shamorau,

  Welcome to the Microsoft Answers site!

  (1) do you have because of recent changes, after which the problem occurred?

  The first thing I would say is to update or rather uninstall and reinstall display drivers and who might have to deal with the issue.

  Also I suggest you try to use another monitor to see if it is not a problem with the monitor.

  Let us know if the problem persists after the driver updates.

  Concerning
  Varun j: MICROSOFT SUPPORT
  Visit our Microsoft answers feedback Forum
  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• InDesign - type display images appear black and white and grainy

  Please help! I have scoured the internet looking for a solution to this problem for many years and were generally able to work around it so far.

  A bit of background first: all the images are recorded as a dish, .eps, CMYK, 300 dpi (about 6 inches square), with clipping paths. All images are created from the same Photoshop file (working model) - photo of a single bucket on a white background, with an existing clipping path. Illustrator illustration is placed in this file and distorted to create images for the various products that we manufacture. (Rather than photograph each bucket with a tag on it).

  Issue 1:

  What seems to be completely random, sometimes square or re-related images in InDesign appear black and white dotted with images (typical display). I used to get frustrated with it, but since I couldn't find a solution, I usually ignore it because the "high quality screen" works very well.

  Two of these buckets below have been created since the same file photoshop, the same day, saved in the same way. The two shown here in typical display.

  

  Even buckets again, both the 'high quality screen '.

  

  2nd question:

  Now, I create a new InDesign "Data sheet" model for our products and each sheet will have 3 buckets shown. Because the buckets are white, I add shadows laid and Interior to create the deep shadows. I want to be able to create a Standard model, given that several designers in our Department are going to access it and when they create a new datasheet, all they need to do is add a link to the photos of the bucket for the new product (which will be created from the photoshop, existing model) and drop shadow/inner shadows everything remain the same.

  On the images that become black and white grainy (3085 above), the effects are applied to the colored areas of the buckets, no not the path of clipped bucket.

  This screenshot below shows two buckets to high quality screen. I've selected two images and try to apply the same exact shadow, but as you can see on the left is almost ghost image of bucket. The two images have the exact same clipping on them. Help, please!

  

  SPE is no longer recommended for use with InDesign format. Because these files have some content vector and raster, save it as a Photoshop PDF and see if it helps.

• Libretto U100 - pc to tv adapter displays black and white

  Hello
  I have an Averlite tv adapter pc using a composite connection to the TV. I changed my screen to 800 x 600, but it appears in black and white on the TV (on the laptopn is it perfect color).

  Anyone have a similar problem or can help me? Thank you in advance.

  Hi Julia

  Can you please tell me what Averlite tv adapter pc is? Can you please send a link where I can see what you mean exactly?

  This card is connected at the end of the RGB port at the end of the RGB cable + delivered?

  I saw this little booklet several times but I n t try to connect it to the TV but the principle on all laptops from Toshiba is the same. It is of course much easier with laptops that have S-Video output port.

• Irish critical update needed to solve the problem of black and white tv on the G20!

  I recently had trouble with the implementation of the tv on my Qosmio G20, I was directed in the direction of an issue of black and white affecting earlier models. The solution to the problem was to use the drivers of the g20 and run 2 reg files.

  Having done that I tried all combinations Irish possible, with still in black and white without success, I then tried UK and got the color.

  I mucked with the recording files and found that there is no Irish layout in the file, then when a user updates to Ireland as their situation they will always get black and white.

  The Ireland uses the exact same settings for television as in the United Kingdom, however if a person chooses UK they fall outside the Irish guides or Irish to choose channels amongst (Ireland is not part of the United Kingdom)

  I found the settings for the United Kingdom-

  [HKEY_LOCAL_MACHINE es\ttv200x\Parameters\44]
  @= "United Kingdom".
  "FreqBoundary" = dword:000493e0
  "LB_VideoStandard" = dword:20000080
  "LB_AudioStandard" = dword:00020000
  "LB_ShiftFreq" = dword:00000abe
  "HB_VideoStandard" = dword:20000080
  "HB_AudioStandard" = dword:00020000
  "HB_ShiftFreq" = dword:00000abe

  Thinking the 44, was the dialing code for the United Kingdom (which took a while to understand), I added an entry to register with exactly the same parameters but with the Ireland and 353 above.

  [HKEY_LOCAL_MACHINE es\ttv200x\Parameters\353]
  @= "Ireland".
  "FreqBoundary" = dword:000493e0
  "LB_VideoStandard" = dword:20000080
  "LB_AudioStandard" = dword:00020000
  "LB_ShiftFreq" = dword:00000abe
  "HB_VideoStandard" = dword:20000080
  "HB_AudioStandard" = dword:00020000
  "HB_ShiftFreq" = dword:00000abe

  I now have color tv under the Irish settings in the library, I also make it sound now, where before I didn't. I hope that the code above will add registry files named ttv2_regdata_20050111.reg that comes as part of the correction of pilot http://support.toshiba-tro.de/kb0/TSB5800V20000R01.htm to the problem...

  Thanks to jimi in what follows after http://forums.computers.toshiba-europe.com/forums/thread.jspa?forumID=42&threadID=11145 for pointing me in the right direction.

  Hope this helps someone...
  laters taters...

  Hi Joseph

  It is very nice to hear that you solved your problem and thanks for the comments!

  Good luck!

• Black and white photos at the start of printing OK then turns reddish, changed the cartridges, same problem

  HP Photosmart C4600 all in one printer, HP, Windows7 desktop. When I try to print copies of old black & white photos, on premium Matt paper or any document (I tried all), with settings for grayscale or black and white, printing starts OK (black & white) and soon begins to print with a reddish tint. I changed the cartridge back & White 3 times with the HP cartridges and the problem persists. I cleaned my print heads, the problem persists, I tried various other parameters without result. Finally, I gave up and I went back to my old Epson 15 year for problem free Photo printing. How can this problem be fixed? Thank you!

  When you print graphics color cartridges are usually used to print even black and white.  In addition, when printing on the paper color photo is always used as the pigmented black ink cartridge is not compatible with the photo paper.

  It would seem that your color ink runs out.  See the troubleshooting steps described in this page.  Most likely, you need a fresh color cartridge.

• Aero Glass problem? saved only in black and white video acquisition card: clolour sceme changed temporarily Aero in Vista Basic: I have Vista home premium, 32-bit

  video capture card via USB to the PC... everything works but only in black and white and info: perpetual sceme changed temporarily Aero in Vista Basic:

  What is the reason why it is black and white?

  .. and if so: how to change? I have Vista home premium, 32-bit system (PC bought in 2007)

  can anyone help?

  Hans

  Hello

  1 have had any changes made on the computer before the show?

  2. who is the manufacturer of the video capture card?

  3. If it works well before?

  4 is the issue limited to the video capture card?

  Method 1:

  Check the link and see if it helps:

  Solve problems with Windows Aero

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Windows-Aero

  Method 2:

  I suggest also refer to article and change the theme:

  Change desktop theme

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-desktop-theme

  Method 3:

  I would also suggest update you the graphics drivers on the computer and check if the problem persists.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

• Computer load upward with display in black and white

  When loading my computer upward, all right up until just before I finish the load in place, when the screen turns into grayscale (black and white).  Restarting the computer is not solve it.

  The first Question of troubleshooting: If the problem is new, what has changed between the time things worked and the time they do not have?

  Laptop or desktop?

  If a desktop computer, connect the computer to a different, known monitor that work. If all goes well, throw the original monitor. If the problem persists, replace the video card for a well-known work. If it is a laptop, you cannot correct yourself. Communicate with technical support of the computer laptop mftr... MS - MVP - Elephant Boy computers - don't panic!

• HP3209a not printing black and white enamel but will display the web page

  I'm on Mac OSX10.8.  My HP Photosmart 3209 has suddenly stopped printing yesterday and had a pop up that says I got printhead problems.  I spent two hours on the phone this morning with two so-called experts feel, the first who said that the problem was with my iMac (he couldn't find it) and the second who said it was a problem with the printer (he couldn't find it).  The printer is connected to an iMac by USB cable.  It will not print e-mail or most of the pages of black and white but now curiously print a web page. BTW, I put new ink in it and did not help anything, and Printhead Cleaner ran about two dozen times.  I try to run an alignment but the page it prints which is for most of the blocks of color blue on half a page is not recognizable on the scanner when I try to run the alignment.

  I think that you always print head problems.  Go to System Preferences > print & Scan.  Click on your printer, click Options & supplies.

  From there, go to utility > Open Printer Utility, then clean the print head.

• My built in camera on my Lenovo thinkpad is now only display black and white?

  I have installed the webcam lenovo soft... He showed color and I went to special effects and click one and it just went black and white... and I clicked on cancel special effects and nothing... I just uninstalled, as well... always in black and white :/ How to color on my camera?

  Note: Moved music

  Hi Bryan,.

  First I want to apologize for the delay in responding.

  This issue could have caused due to not having updated due to hardware or driver related issues. I suggest you try to update the drivers of webcam and check if it helps. See the hyperlink "update a hardware driver that is not working properly" in the following Microsoft Help update the webcam driver.

  http://Windows.Microsoft.com/en-us/Windows7/using-webcam

  If the problem persists, you should then contact Lenovo support for more help on this issue.

  Lenovo Support: http://support.lenovo.com/en_US/

  Please reply with the status of the issue so that we can better help you.

• Color display you want to only print in black and white?

  Hi all

  I have been responsible for creating a PDF file that displays in color on the screen but will print in black and white. It doesn't matter who chooses to print from any computer.

  Any ideas if this is even possible? If so, how?

  Searched the web and can't find anything, so any help is very appreciated.

  See you soon

  Is not possible.

• ATI Mobility Radeon X 1400 with the problem of the TV, only the black and white photo

  Hello

  When I try to connect my TV to my Dell Inspiron 6400 with ATI Mobility Radeon X 1400 card, all I get is a black and white image. I have tride all the PAL settings.

  What I tried: I connected the s-video with an s-video cable output to my TV s-video connector (composite) result: no color image, just black and white of my office.

  I connected the s-video with a s-video SCART cable output to my SCART TV (RGB signal) result: no color image, just black and white of my office.

  I connected the s-video with a s-video SCART cable output to my SCART TV (composite signal) result: no color image, just black and white of my office.

  His is no problem, this workt fine.

  Anyone know how can I get the color on my TV? Is this possible with my s-video cables? What type of signal you send with my Mobility Radeon X 1400 graphics card?

  Kind regards

  Marcel