black lines after updating album app

Similar Questions

• Qosmio X 870-149 - black screen after update to 8.1 win

  After an update to win 8.1, I got a black screen after connection, the only thing I could do was to press zero when starting and make a recovery facility.

  It took 40 hours, I don't know why it took so long, but when it was over, the HARD drive was completely empty, so I installed win 7 instead, because I had not done? a restore CD. The problem now is that I still get black screen between the two, and think it might be a heat problem, I still have the warranty, but I don't know if it applies when I installed win 7 on the machine.

  I still have a warranty on my Qosmio toshiba

  Hello

  Well, the guarantee covers material related problems. It does not any problem with the software.

  Now the question is: why the black screen appears?
  Is - this problem is hardware or software?

  What happens if you access the BIOS?
  You don't see anything on the screen?

  Something is visible on the external monitor?

• video capuring crashes after update camera app!

  Video capture automatically hangs (1 second) after update to motorola to 4.0.7.5 camera application

  other applications works correctly (google camera)

• Black screen after update firmware TL 838

  Hello
  After firmware update USB with TV on 513312 xxTL838 message "Update complete" and something like "changing software" (I don't remember exactly). Once the TV screen is black and the Green led are on.
  remote control does not work.

  After power deconnect and connect - situation is the same.
  Is it possible to fix this?

  Hello

  > Now I have RC with the iPhone.

  To use the REGZA link, the two devices must support this standard.
  I doubt iphone this.

  To use an iphone as a remote control, a special application is necessary
  I know that some app stores contains these apps for TV from other manufacturers, but I don't know if you there is a Toshiba app in the app store to control the Toshiba TV via iphone m.

• FireFox starts a black screen after update 33

  After that set Firefox to update my version to 33, the application is launched in a black screen. I tried to uninstall my version and reinstall the current version (33) and it (Firefox) always throws a black full size window. No further questions with other applications.

  Could you try starting Firefox in Safe Mode? It is a standard diagnostic tool to disable some advanced features of Firefox and extensions. More info: questions to troubleshoot Firefox in Safe Mode.

  With completely closed Firefox, you can hold the SHIFT key when you start Firefox.

  A small dialog box should appear. Click on 'Start mode safe' (not reset).

  Any difference?

  If Firefox is visible, go ahead and disable the use of Firefox hardware acceleration as a workaround for incompatibility of graphics software possible driver card.

  "3-bar" menu button (or tools) > Options > advanced

  In the mini ' General' tab, uncheck the box for "use hardware acceleration when available.

  This will indeed be the next time you go out and you launch Firefox upward.

• Qosmio F60 - 11 c - black screen after update of Windows 7 Directx11

  Hello
  Two days ago I've updated Directx version because I want to try call of Duty Black Ops on my laptop. I've updated normally and it works perfectly but after a day at the restart of Windows7, after Windows 7 logo, I have a black screen and cpu fan running at full speed. So I used Toshiba Recovery Center and I got my pc to make settings. When it installs the drivers crashing into the graphics driver again. After that, I installed Windows 7, but I am using my computer on the resolution of 640 x 480 with 8 colors... And I can use the security with network mode but if I install the driver for GT - 330M and restart the computer, it hangs on after restarting windows 7.
  I tried to change the options in the bios, but it's always the same problem.

  * My :* graphics card Nvidia GT330M
  * :* Bios version 2.50 / EC2.40 (last update on the Web from Toshiba site)
  * Nvidia Driver :* 260.64

  I downloaded 197.16, 197.71, 258.80 drivers Nvidia and laptopvideo2go, but when I try to install these versions, it does not compotible with my control panel.

  IM totally crushed now and I do not want my laptop to Toshiba Technical Service which is in Turkey. For an easy fix, they spent 30 days...

  You have an idea?

  Thanks in advance
  Macaws.

  Post edited by: araskalyoncu

  > I used Toshiba Recovery Center and I got my pc to make settings
  What happens then?
  Problems after installing the operating system recovery disc?

  > When it installs drivers crashing into the graphics driver
  You n t need to install all the drivers after installing the recovery disc. The recovery disk installs OS Win and also drivers needed!

  > I downloaded 197.16, 197.71, 258.80 drivers Nvidia and laptopvideo2go, but when I try to install these versions, it does not compotible with my control panel.

  If you want to install non-Toshiba drivers, you will have to do it in the Device Manager.
  You must use the Advanced installation procedure and have point to the driver files (ini files) that you have downloaded and stored on the HARD drive.
  You have simply force windows to select this driver.

• Ipad black screen after updating ios 9.2 2 mini

  Hi all

  My mini ipad 2 was somewhere in the update to ios 9.2 and when I tried to unlock it, it did not.

  I got a black screen, I thought that maybe battery or something.

  After the cable, I hear the sound of connect 'dived', so he is still alive.

  Then every 5-10 seconds who even connect sound repeats.

  So I tried the following:

  -Home and power button, connect to itunes-> restore

  -Home and power button, connect to itunes-> update

  -Home and power button, connect to itunes->-> tried restoring back to 9.1-> causes error 3194

  So, I tried all of the obvious ways to get the ipad back alive again, but I still have a black screen and the sound of connection.

  What to do?

  See the following support article on error 3194. https://support.Apple.com/en-us/HT201442

  -AJ

• Black screen after updates of Windows 8.1 - No. Cursor (Lenovo 50-75) - and gets hot

  Dear Forum,

  I have a new Lenovo Z50-75 with FreeDOS: I made a Windows 8.1 installation, and everything went well.

  After installing the approximately 70 updates - at one point it restarts and I get a black screen, just after few see the Lenovo Logo (enter the BIOS works).

  It is not all Windows start - I can't get fashion so safe, and I don't get any cursor.

  The behavior is reproducible, 2 times. Also when it crashes at the black screen, the van get reall busy, Levy and the laptop gets hot.

  Anyone working on this issue, or has any idea what should I do?

  Thank you

  Robert

  Updating the BIOS is not always my first option (risk, performance vs).

  Anyway... It works, everything is good.

• Black screen after update yesterday Windows 7

  This morning I got a black screen with cursor error.  Was able to get into task manager, started in safe mode, Startup Repair did not work.  Went to system restore and restored to the 8/14 update, computer restarted normally.

  So the problem seems to be related to last update (19/08/10).  Now, of course I am offered this update again!  Any info on this problem?  I'm on a Dell Inspiron 546 desktop running 64-bit Windows 7 Home Premium.  Thanks for any help...

  Thanks for your reply.  After the system restore, I installed all the news updates and system rebooted normally.  Who knows why?

• Black screen after update of Microsoft Windows 7

  After you install automatic updates on 04/16/10, Windows 7 is no longer load.  After the manufacturer splash screen (Dell), the screen goes black with the cursor at the top left.  Cannot start in safe mode.  Used the recovery disc for restore to the point just before the updates, but the problem persists.  I'm now restore to factory settings.  Most of the messages on this problem point to video drivers, but since I can't get a Safe Mode option, I don't think that the question is a video driver.  After that I restored, I fear that it will recreate the problem to apply updates.  No one knows exactly what causes this?  I do not like to disable automatic updates, but do not know what else to do.

  Lisa Dell,
  If you already have a factory restore, then you can create a System Image first.  Then update all your hardware drivers.  It is better to go to the website of the hardware manufacturer to obtain the latest drivers.  Then run Windows Update, until no more updates only is presented.  Then install all the programs gone 3.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• black screen after update?

  After installing the updates, my screen is black and I can't do anything? Help

  Hello

  Welcome to the Microsoft community. I appreciate your efforts to solve this issue. I will certainly help you with the problem you are experiencing.

  I would like to ask you:

  -What is the brand and model of your PC?

  -Updates were installed after that this problem occurred?

  This issue may arise when there is a conflict with the boot files or when there is corruption in the boot files. I recommend you to try the following methods to diagnose and solve this problem.

  Method 1:

  Disconnect all external devices, as appropriate (printer, scanner, camera photo or any other USB device) except the mouse and keyboard and try restarting your computer.

  If you are able to start the computer after disconnecting all external devices, the device identification by connecting one by one. If the problem persists, proceed to the next method.

  Method 2:

  Use startup repair and other options for system recovery to see if one of them help you.

  Startup Repair is a Windows Recovery tool that can fix certain system problems that might be preventing Windows to start. Startup Repair scans your computer for the problem and then tries to fix it so that your computer can start correctly.

  What are the system recovery options in Windows 7?

  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  System Restore warning: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  If the method above does not work. You can access the advanced options by following the steps below.

  If you are unable to start the computer, then I suggest to automatically perform a repair by booting from the installation disc. Try the following steps.

  1. Insert the floppy disk repair or Windows 7 DVD and restart your computer. Boot from the DVD, press a key if prompted.

  2. Choose your language and click Next.

  3. Click on repair your computer, select the operating system you want to repair.

  4. Click the link to repair system list of recovery tools in the System Recovery Options.

  Hope this information was useful. Let us know the results once you have tried these methods.

• Fusion 7.1.1 - Win 7 black screen after update, but still works

  After the last update of fusion, my VM 7 Win shows a black screen. The mouse is always visible on the screen, and everything is work and display the preview in the library window. I have disabled the accelerated graphics and still nothing, as well as updating my vmware tools. When I stop the virtual machine, I get the screen to show, but restarts, it goes black again, and rebooted several times.

  any thoughts? I have a bunch of stuff that I have to get out of it to the ability I have to erase and start over.

  Thank you!

  After a few other troubleshooting, I found that I was waiting on an update to OSX as well. Did the update, and everything came and works correctly. Figure I'll add that, just in case where someone is looking for a solution.

  See you soon.

• Problem with scrollbar after update with App Builder 32.4.4.

  Hey,.

  I just created an app update with the new version of the DPS App Builder (32.4.4.). After the update the scroll bar (of the Viewer - no content drop-down) moved to it of original position. (see screenshot)

  Any ideas?

  

  The update went live Saturday. If you do not have automatic updates enabled for your devices, then you should see the update in the App Store Update tab.

• Black screen after updating IOS

  My daughter has an iPhone 4S. When she tried to update the phone yesterday, the screen went black. I know that the phone is on, because she speaks for me, when I touch the screen. The touch screen responds, but I don't see anything about it. What should I do?

  Best regards Rune

  Restart the iPhone by holding down the button Power + Home button even time until apple logo appears

  IF it is not difficulty a phone connect to iTunes & keep a restore via Recovery Mode.

• After update, training app watch does not follow the calories or remotely.

  I did the update Apple Watch Jan 2015 and now when I use the app to drive the thing which is the subject of a follow-up is both. Distance and calories remain at zero.

  I noticed this also. I did a 20 min walk today and it wasn't time added to my ring of exercise on the implementation of the activity.