Black print cartridge registers is not on the right side of the page

CP1215 has developed a weird problem! Recently replaced the black print cartridge (new, original HP).

Printing a document in BLACK color, this isn't a problem. Crisp and clear impressions.

Print the same document in color gives completely misaligned recording BLACK on the side RIGHT of the page. The side LEFT is clear!

Printing CONFIGURATION PAGE confirms the problem. Registration of marks below on the LEFT are perfectly aligned.

But on the lower RIGHT, all colors are aligned with the exception of black - the black line is much higher and offset printing to the right where it should be. That's why the color prints are all blurry on the right side of the page.

Calibration several times running, check the drivers etc.

Any help/advice is really appreciated!

Hi Gemini02,

Sorry about the long absence, but was busy with other stuff. More beat troubleshooting according to your last email.

First of all, a few answers to your questions:

1. don't know what the problem is. Don't want to start replacing immediately.

2. all ink levels are more than 80%; Black nine.

3. all the cartridges are original HP Black has been replaced recently, the other three provided with your printer.

4. the paper is double-a premium, 80gr

5 paper is set on the plain. Have you tried with the HP90 and light parameters too.

After following your instructions of troubleshooting:

6 printer moved closer to the wall outlet - it's a machine heavy tho!

7 pressed & held green button. Config and supply status printed pages.

8. print with other applications (Photoshop, Word, PowerPoint and Adobe Reader).

Problem persisted. Registration completely to the bottom of the hand right side of the page and the worst in the lower corner straight out.

Acts of desperation next, pure:

9 deleted each cartridge, shaken several times on the axis horizontal and then triggered one end while decreasing the other and vice-versa several times. Replaced in the status bar.

10. Ran HP Toolbox calibration.

11. test print to Adobe Reader - same document as before. Substantial improvement!

12. Repeat steps 9 and 10. Further improvement.

13. Repeat steps 9 and 10 more. Almost no problem checking.

14. Repeat steps 9 and 10 more. No record of the questions at all!

Then, to avoid the location and power source:

15. moved printer in its normal location.

16 connected the printer to its normal power source - an extension of good quality.

17. reprinted on the same page. No registration no questions at all.

I have no idea why the steps 9 and 10 would have such an impact. And why repeating them would improve the print quality progressively until no problems are observable. I have detailed my action here in case they can help someone else.

I thank very you much for the support and guidance you provided. If you have any idea why the repeated shaking and calibration solved this problem, I would be very interested! Keeping in mind I ran several times previously without success to calibration.

Thanks again for your help.

Tags: HP Printers

Similar Questions

  • DeskJet F4480: full black print cartridge still does not print black. Colors OK.

    What the title says. All of a sudden my Deskjet F4480 does not print black. All cartridges are almost nine (changed recently, bought at Staples). Colour printing is OK. Print a page with black text and results in only the images printing color images. I only went through all the steps of cleaning cartridge several times, no difference. There is no error message, just black not appear do not at all.

    And... Here is the solution.

    Funny how I found an explanation of the problem and how to fix it on a different printer manufacturer's Web site, but not on HP... But I digress.

    The black cartridge has been blocked. The way of difficulty is:

    1. remove the faulty cartridge from the printer.

    2. place a small amount of boiling water in a cup (about 1/4 in.) and dunk of the print head (the part where the ink comes out) in warm water for a minute. Do not immerse the entire cartridge in hot water, just the print head.

    3 take it out, pat against a paper towel, observe the model ink left in the cartridge on the towel. If too little / interrupted, dunk again in hot water for another minute, pat again. You want to get an unbroken line of ink through the length of the print head. Repeat as needed (I did 4 times total).

    4 cartridge Pat dry everywhere, put it back in the printer, run cleaning cycles (1 - 2).

    5. If still not good fixed, take out the cartridge and repeat 2 (I had to do it again).

    You will lose little ink, cartridge of bad and good a well (you can not run cycles with only 1 cleaning cartridge), but at least you won't have to throw a nearly full cartridge.

  • HP Officejet Pro 8600 black printing/copying has vertical lines on the page. The color is fine.

    HP Officejet Pro 8600.  at 2 weeks.

    Windows XP

    Color copies/prints are very good.  Black prints/copies have vertical lines widths, ranging from top to bottom.  This occurs when it is copied to form glass or through the feeder.

    Suggestions?

    If the unit is producing lines in copies, so I suggest checking a few things. Make sure that the printer is plugged into a wall outlet directly and not in a surge protector. Additionally, make sure that the glass of the scanner (including the small strip on the left) are clean.

    Also, see the steps in the document troubleshooting located here.

  • Message "install the black print cartridge.

    I installed my new LaserJet Pro M127fn MFP printer.  However, even if I have the cartridge properly into the printer, the above message keeps appearing.  I tried a hard reboot several times, but the message continues to appear, and I'm unable to print.   What causes this problem?

    There could be some left on the toner packaging. Please try the steps outlined in this guide below, if all goes well he will clear the error

    Toner blinking or 'Install black print cartridge' Message is displayed on the control panel

    If this does not work, and given that the printer is brand new, you can also contact HP in North America at 1-800-474-6836 support or find the local for your country here phone number: http://welcome.hp.com/country/w1/en/support.html please look for the category 'technical support after you buy '.

  • My V715W was not printing black print cartridge replaced with cartridge Dell, error message says lack of empty, re-installed ink cartridge the cartridge with the same message. Put original cartridge is black and got the same error

    My V715W was not printing black print cartridge replaced with cartridge Dell, error message says lack of empty, re-installed ink cartridge the cartridge with the same message. Put original cartridge is black and got the same error

    My dells V515w printer will not print after that I changed the cartridge, the cartridges black & color dells. There is no print blank paper. Re-installed I'm really lost.

  • HPO D5560 not print with the black print cartridge

    Having a D5560 printer which stopped printing with the black cartridge.

    Thought it was the cartridge has installed a new (only use HP cartridges) no difference

    After thinking the Black just stopped - no phasing-out quality, etc..

    Ran the cartridge filter (all levels of cleaning) no difference

    Print well if I remove the black cartridge so that the Tricolor print black but it's only good to work around the problem

    I use this on Windows 8.1. It worked fine for months

    Can't think that I had installed recently HP driver updates

    I have a hardware problem?

    Thanks for any input

    See you soon

    Geoff

    OK, so it's weird.

    Just thought to connect my netbook windows 7 into the printer.

    It print very well with the black print cartridge.

    Sent a work computer Windows 8.1 and now prints fine in black of the black cartridge.

    Problem solved, but I'm losing the plot!

    See you soon

    Geoff

  • Black ink cartridge 564XL will work in the 6510 AIO printer?

    Black ink cartridge 564XL will work in the 6510 AIO printer?

    A cartridge of the same size that the color cartridge would be the photo cartridge.  This is not interechangable with the black cartridge, you will need a black cartridge.

    document here can help.

  • LaserJetPro M201dw: Error Message on new HP LASERJET PRO M201dw - "install the black print cartridge.

    Hi, we have a new printer HP LaserJetPro M201dw. We put up this morning, following the instructions as stated in the manual, but the printer keeps blinking and say "install the black print cartridge or clear jam."

    The printer has never been used, so there is no jams, and the ink cartridge was too brand new and a black cartridge HP official. The printer does nothing, it doesn't print, I can't do a cleaning page, it simply does not work. I tried resetting, disconnected from the power supply from the mains and put it back, and we tried a second new ink cartridge, he pulled several times and it still says "install the ink cartridge. I is not a jam in the printer at all. I tried following the recommended steps for others who have had the same problem, but always without success.

    The printer has been installed successfully on my Windows Vista computer, but the same error message appears on my computer when I try to print directly from the computer.

    I would be grateful for any suggestion. Thank you very much.

    You probably have a joint expedition on something.  It really is a common thing, now it's HP shipped toner in printers take the tray, toner, open everything. Tilt the machine upward, look inside, etc.  Use a flashlight if you have not entered of lights in the room.

    If it's blue or orange, a transport lock.  It could be as simple as a piece of tape, a plastic tie or a block of expanded polystyrene (white).

  • Photo on the 5510 black print cartridge

    I just bought a Photosmart HP 5510 e-all-in-One Printer (B111a).  It doesn't have a crack 'black photo.  Quality of the printed photo will improve if I change the black cartridge for a photo before printing photos black?

    Thank you.

    Hello

    I'm afraid that you can't use the photo cartridge instead of the black print on your printer cartridge. See label install the cartridges or the symbols on the door of the printer when you insert the cartridges. The symbols must match those on the cartridges.

    If you hurt, I guess you get an error of ink.

    Zab

  • When you print photos it prints black evey line 1/2 inch on the page

    My Photosmart HP 7510 prints black lines every 1/2 inch on the page when printing pictures what is the solution.  I cleaned the print heads and the print quality and the allignment.  What Miss me?

    Hello

    I would suggest trying a hard reset with the printer.

    Hard Reset:

    Unplug the power cord from the printer and the wall

    Take out the toner cartridges.

    Wait for 30 seconds

    Plug the power cord into the printer and the wall (be sure that the printer is plugged into the wall and not a surge protector)

    Replace the toners/cartridges in the printer

    Let me know the results

  • e-All-In-One series C410: HP Photosmart - black print cartridge produces only "ghost image".

    The black print cartridge produces a ghost image.  I installed a new cartridge with the same results.  The photo and 3 color cartridges cartridge are all ok.  I also introduced "clean printhead" and ran a "print quality report", where black could not appear in the report.

    Dragon fur, I rechecked possible solutions in your response, and after a new test of everything that I had already done, I noticed an alignment test.  That was the problem.  I tried to clean the print heads, as a last resort, on my 4 year old printer.  Solution: I bought a new printer.

    Thank you for your wonderfully detailed answer.

  • HP psc1350 all-in-one: check printer cartridge error will not clear

    In the middle of printing of the check print cartridge light error came.  The cartridges are faily new and there has been no discoloration.  I tried to remove and reinsert the cartridges, disconnect the printer from the computer, disconnect the printer, press Cancel.  Error will not clear

    Hey @dennisc10,

    Welcome to the Forums of HP Support!

    I understand that you have some problems with an error light on your PSC 1350 all-in-one printer. I can help you with that.

    To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once done, this document explains How to solve the blinking lights on the printer.

    If after following the above you still can not clear the error, the printer needs to be replaced. You can contact the HP Support by clicking on this link and fill out the form below to discuss the options based on your warranty.

    Please let me know the results after following the above. If you are able to solve the problem or reach some resolution, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

  • Print cartridge missing or not detected C4585

    Hello

    I have a photosmart C4585 printer all in one, for a long time, I used hp cartridges-it worked fine until recently when the "print cartridge missing or not detected" message appeared.  I Googled it and found a video on YouTube showing how to remedy this with a particular sequence, which only worked to a print.  Then the error message returned.  I replaced the "truant" cartridges with HP authentic and still always get the same error message.  I am at a loss to know what to do, really can't afford a new printer, my daughters will be lost without a printer for homework!  Please can someone offer me advice?

    Thank you very much in advance.

    Vinia, I understand that you use genuine HP NO ink cartridges. Usually, this creates a problem at the beginning. Even if you were able to print before, using the correct cartridges is the best way.

    Here is a link that might help with this problem.

    http://goo.GL/BI5MB

    I hope this helps, please do not hesitate to ask questions. Thank you

  • Print cartridge missing or not detected message

    Hi - have a HP 4280. I just started to receive message "print cartridge missing or not detected". Have replaced the cartridges with new HPs and no dice. Always get the message. Have restarted printer and still no hemp. Any ideas?

    After cleaning, resets, etc., I got to work by installing the cartridges on the tenth time VERY strongly in their slots... I'm sure this isn't the approved view of HP, but it worked!

  • OfficeJet HP5510 remove and check black print cartridge error

    Hi, my OfficeJet 5510 was printing very well. Then suddenly gave me the error "remove and check black print cartridge". The cartridge has plenty of ink. Remove and replace the cartridge. No luck. Past to another black HP cartridge. Same mistake. Any suggestions?

    Hello

    Only two suggestions for you, but they might do the trick:

    Try the troubleshooting steps as much as possible the documents below. The only step that you should ignore is to buy a new cartridge, since you just got a new.

    "Remove and check [color / black / photo] cartridge ' Error Message appears on the screen of the control panel.

    "Incorrect print cartridge" or "Print cartridge problem" message

Maybe you are looking for

  • TE2100 frozen and CMOS / boot problem

    I have an old TE2100 of 3.5 years.When I worked on this subject, it froze all of a sudden. No reaction on the keyboard or the mouse. I had power is down by holding down the power button.After that the laptop wouldn't turn on more, so I removed the ba

  • Report generation toolkit jump between workbooks

    Hello I'm having a problem with my VI which I wonder if anyone has a solution too or workaround. Basically during my tests I write multiple data sets to different sheets of Excel using the report generation tool. At the beginning of my code, I have o

  • How to get the sound of my computor when watchig itv/player

    How do you get sound on your computor, when you look at itv/player

  • HP LaserJet M1319f not copy...

    I put the paper in the tray and digital reading says "document loaded", then I press "copy/start copy" and he says "copy pending" and does not have the copy; reading then goes back to the "document loaded.  I have not changed anything and made copies

  • LR stuck on the importation of the iPhone 6

    Hi allRecently, like many others, my wife and I migrated to Lightroom opening. I've used now for a few weeks and I am getting more excited. So, we started using the library of my wife as well and one of the first things to import photos from his iPho