black screen after 2 hours of chkdsk runs with Vista

Because my PC freezes from time to time, I did a chkdsk. The chkdsk runs for about 2 hours and then there is a black screen, the PC is always on. So I have it turn off, then restart. Then I can use Windows normally, but it freezes often later.

How can I do a full chkdsk with no black screen?

Hello

1. you receive an error message when the computer crashes?
2 did you do changes on the computer before the show?

Method 1:
You can find more information on this issue in the event Viewer and check:
http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer
http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer 

Method 2:

You can start the computer in safe mode with command prompt and check your hard disk for errors

Check out the link to start the computer in safe mode and then check-
http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
See the link to check your hard disk for errors:

http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

Warning: We recommend not to interrupt the CHKDSK process. Microsoft does not guarantee the integrity of the disk if the CHKDSK program is interrupted. For security, you can back up your data before using check disk drive if you can. Defective sectors found while making the disk check would result in a loss of data.

You can also check out the link provided:
http://Windows.Microsoft.com/en-us/Windows-Vista/optimize-Windows-Vista-for-better-performance

Tags: Windows

Similar Questions

  • Black screen after entering the password to open Windows Vista

    I need help for vista windows Desktop to appear. All I get is the black screen after I get my password

    Aziz I apologize not responding earlier! In fact, I had to do was reboot the pc! I wish I knew exactly what it was that I did!

  • Get an error message when turning on the computer, then just get a black screen after the message saying cannont find script file c:/windows/run.vbs

    Original title: windows does not

    I have windows 7 and get an error message when turning on the computer, then just get a black screen after the message say cannont find script file c:/windows/run.vbs

    What can I do?

    Enter your bios usually with keys F2 or delete to the first powered

    Use default Optimize can be the F5 key and save and exit,

    Insert your installation disc or flash media and press F8 or F12 to boot on it

    Then use the recovery tools to run the Startup Repair tool.

    http://Windows.Microsoft.com/en-us/Windows/Startup-Repair-FAQ#1TC=Windows-7

  • Pavilion 15 - p065tx: Pavilion 15 - p065tx, black screen after BIOS update recommended by HP assistant

    System reboot with black screen after accepting the update of the BIOS recommended by HP assistant this morning. AC power on at least three hours of waiting after the process completed successfully with auto update reboots always.

    Power light is on. Wired broadband light is turned on. Light CAP LOCK keyboard and led speaker hold noway.

    Hard reset has been tried 3 times with no improvement.

    External monitor is connected but no signal has been out of the laptop, screen is black.

    Done a few times this page to reset the BIOS setting blindly:

    http://support.HP.com/us-en/document/c02217843

    BEEPS heard when you press F10 or F5 during procedures. But still black screen.

    What can I try again?  Please advice kindly!

    Hi @ sokw,

    I have read and reviewed the post. Thanks for your reply. It seems that bios is damaged, and that is why the computer does not start. As it cannot be fixed by any software troubleshooting, you will need to contact the HP support by phone for the machine.

    HP technical support are available by clicking on the following link:

    http://h22207.www2.HP.com/us-en/?openCLC=true

    (1) once the page opens, please select the country in which you are located. Then enter your model of HP on the right number.

    (2) then choose "Contact the Support" tab at the top and scroll to the bottom of the page "HP Support - contact" to fill out the form with your details.

    (3) Once finished, click the "Show Options" at the bottom right.

    (4) Finally, scroll to the bottom of the page and select "Get a phone number." A file number and telephone number will now fill for you.

    I hope this helps. I would like to know how this happens. I really hope that the problem is solved without hassle and the unit works very well. Believe me, I've done everything I can to help by keeping your interests in mind. Please reach out for questions and I'll be there for you help.

    Just to say thank youPlease click the ' Thumbs Up 'button to give a Kudos to appreciate my efforts to help me. If it helps, Please mark this "accepted Solution" because it will help many other people with the same problem to get it resolved without hassle.

    Now carefully and have a wonderful week ahead.

  • Satellite A100 system goes to a black screen after the recovery procedure

    I tried running the recovery CD, I received on my cell phone. the process perfectly, (I have only one CD, I don't know if I need a second). At the end of the process, I have the option to insert the second CD, or jump.
    Because I don't have that one CD I have support on ignore.

    I tells me that the installation is complete and I can restart my system.
    Then I removed the disk and I tried to reboot the system. The system goes to a black screen (on which he indicates that Microsoft load) and then crashes. That was the problem I was facing before recovery.

    Basically, the recovery process has not worked. I don't think I did something very wrong, unless I need a second CD. What could be the problem?

    Help me please!

    Hello

    The A100 is one of the new series of laptops and AFAIK the image of Toshiba was placed only on a CD (DVD) recovery.
    I think that the message and the possibility to insert the second CDconfuses a little.

    In my opinion the black screen and freeze has nothing to do with the recovery procedure and the new installation if Windows OS.
    Due to the fact that this problem has occurred until you have installed the OS from the recovery CD, I assume that there must be something wrong with the hardware.

    But it s very interesting to know if the same problem appears after the new installation of Windows from the original CD of Microsoft.

    It's worth a try.

  • At the end of the factory restore, but black screen after "Windows has set up the computer.

    The model in question is VC863AA #UUW

    I want to get back the computer to the factory condition, so I rebooted and you press F11. Everything went exactly like this: http://support.hp.com/us-en/document/c00814731#N72 (chapter "Start a restore from the hard drive and the computer is off")...

    .. until step 10, which States:

    "The computer restarts and continues in the installation of Windows. Complete the configuration screens and wait until the computer finishes the installation program. "Then turn off the computer, reconnect all devices and turn on the computer.

    Yes, the computer restarts. She continues in the Windows installation (it says "medan windows konfigurerar datorn Vanta", which means roughly "Please wait while Windows configures the computer"). After that which was for about 5-10 minutes, the text disappears and the computer restarts by itself.

    After that, he gives a normal load Windows Vista bar and after that black screen. It seems to be a little bit alive but jammed somehow. If I let it be for several hours, he goes to the standby mode. If I wake up, he still won't. I can plug a USB another keyboard and he will make some access to hard drive (load a driver probably). I can press the sleep button and it will go into sleep mode. But if I press the power button / stop briefly, it will NOT stop.

    So finally, after several hours I forced to shut down (by pressing the power button / stop longer). When I start it, it goes back to behave as explained in the previous paragraph.

    If I press F8 during startup and select Safe mode, it goes in safe mode and I get dialogue indicating in Finnish:

    «Asenna Windows: Windows ei voi suorittaa vikasietotilassa asennusta.» See devam fenetresdans asennusta uudelleen tietokoneen kaynnistamalla. »

    Rough translation:

    "Installation of Windows: Windows cannot complete installation in safe mode." "You can continue the installation by restarting the computer.

    If I restart the computer, it goes back to the black screen after the windows loading bar.

    This suggests that there is something in the installation of Windows who jams it.

    I can install Windows Vista from a Vista DVD, but then I can't use the software included with the computer. (App States installation cannot install on a machine that is unauthorized, then of course they are looking for some OEM HP things.)

    Any suggestions on how to fix jam that continues with installing Recovery Windows or how to install the software on a normal Vista would be very appreciated.

    I solved the problem. Good thing I didn't order the restore disks, because that would not have solved the problem.

    I decided to post it because I don't know there will be others who have HP Pavilion Elite m9754sc and will have to face this problem of a black screen after the restoration.

    The fact is that the restore worked perfectly, but in this display card driver is buggy and it causes the screen to go black.

    I thought that what I installed fresh Vista which worked until I installed the driver from the recovery partition display. I tried VGA, outputs HDMI and DVI on the factory installed GeForce GT220 and none worked.

    A defective display driver should normally be no problem we could go in safe mode and fix it to the it. But as with the recovery goes to pre install state (ask what language to use etc.), safe mode does not work.

    So the solution is to unlock the display of the motherboard connectors and remove the factory installed GeForce GT220. Once the recovery and installation of Windows is finished using the graphics card integrated motherboards, you can reconnect the GeForce GT220 and get a updated driver with safe mode.

  • Qosmio X 870-149 - black screen after update to 8.1 win

    After an update to win 8.1, I got a black screen after connection, the only thing I could do was to press zero when starting and make a recovery facility.

    It took 40 hours, I don't know why it took so long, but when it was over, the HARD drive was completely empty, so I installed win 7 instead, because I had not done? a restore CD. The problem now is that I still get black screen between the two, and think it might be a heat problem, I still have the warranty, but I don't know if it applies when I installed win 7 on the machine.

    I still have a warranty on my Qosmio toshiba

    Hello

    Well, the guarantee covers material related problems. It does not any problem with the software.

    Now the question is: why the black screen appears?
    Is - this problem is hardware or software?

    What happens if you access the BIOS?
    You don't see anything on the screen?

    Something is visible on the external monitor?

  • HP 2000-2c22DX Notebook PC: HP 2000 - black screen after login

    Hi, I have a hp 2000 laptop that has a black screen after I login. I have used F9 or ESC tab and follow the directions shown by others with the same problem, but nothing has changed. Sometimes he goes to the site of Regclean Pro I installed when I got the Pc, but suffice it to say you have error and difficulty buying Regclean. I once the buy, but nothing has changed. Please help, I have a lot of photos that I don't want to lose. Thank you

    Try to install the free version of MalwareBytes. After the installation to run a full analysis:

    https://www.Malwarebytes.org/products/

  • computer only blinked a cursor in the corner of a black screen after that it shuts down. Was it an accident?

    Original title: was it an accident?

    My computer only blinked a cursor in the corner of a black screen after that it shuts down. then the fan stopped running current and the screen went blank, but I could still hear the hard drive running. Was it an accident?

    Yep, especially if she does not return.

  • Pavilion 15-243cl after automatic update of windows 8.1 I get a black screen after the home page.

    recently installed an automatic update of windows 8.1. Now, I get a black screen after the home page. I can load the Task Manager and access the internet. tried to go to the SafeMode to start with f8, but several attempts failed. I updated my graphics driver from AMD today and same black screen. I've also restored sytem to an earlier date using the HP utility with results screen - black even after the home page.

    Hello

    Try the following.

    Boot the computer normally and log.

    Black screen, old the ctrl and alt keys and press delete.

    Select Task Manager.

    Click on file and select the new task.

    Type rstrui - also enter a tick in the box for "create this task with administrative privileges" - and click on Ok.

    When the system restore interface is loaded, choose a restore point at least 48 hours before the opening of session question (IE before the last batch of Windows updates have been applied) occurred initially and then proceed to the system restore.

    Kind regards

    DP - K

  • Black screen after the windows login

    Hi, I have a HP Pavilion DV7 notebook with Windows 7 Home Premium installed on it. A problem I've noticed is that, once I connect to windows during a boot, the screen is black for about 1-2 minutes. After awhile, explorer.exe would with desktop, taskbar and icons. I am concerned about this 1 to 2 minutes of black screen after the boot as it did not exist previously. I know I have options such as restoring the computer laptop back to the default state, or by using the system restore. However, I don't want to lose all my stuff, and with respect to the restoration of the system, I'm not sure when the problem happening, as it was some time ago. I have read a Microsoft article, (http://windows.microsoft.com/en-US/windows7/why-is-my-screen-black-when-i-start-windows-7) and tried all the steps with the graphics card and the regestry, but nothing seems to work.

    -Task Manager is able to open when the screen is black (shows explorer.exe running)

    -J' have the drivers on the HP support site

    -laptop is HP Pavilion DV7 3024ca

    You will need to login using the method of trial and error. Please uncheck all of the MSCONFIG Startup tab and restart the system. If the black screen issue is resolved, then check out an application every time and restart the system. This will help you to identify the program interfere.

  • Black screen after the failure of the connection - win 10 win7 installation

    Hello

    SYSTEM ERROR
    Cause
    I tried to install win10 on a PC running win7. Installation stalled at 99% and I restarted.
    The problem
    Now he still run win7, but once connected, the screen is completely black except for cursor. Features such as the job-work list as it should and in safe mode, the screen is not black after login.

    PC INFORMATION
    The video card
    My video card is "Mobile Intel (R) 4 Series Express Chipset Family" (driver version: 8.15.10.2202) Driver date: 25/08/2010) and windows tells me that the video card (graphics - in my language) is updated to the latest version.
    The model
    ASUS Pro79I Series. With Windows 7 64 bit

    Mathias, cordially

    Denmark

    Hi Mathias,.

    According to the description of the issue you do not get black screen after login in safe mode. For example, there might be a chance that the display driver is either corrupted or need a update. Please, try the steps to uninstall graphics card in Device Manager, uninstall the drivers of device from the list of programs, and then download the latest drivers from the manufacturer's website.

    Step 1:

    Uninstall the device from Device Manager

    • Open the Device Manager
    • Expand the section of the graphics card .
    • Find the Display card Driver.
    • Graphics Driver right click and choose Uninstall.
    • Select the check box delete the driver for this device.
    • Restart the computer after the uninstall is complete.

    Step 2:

    Uninstall the drivers of device from the list of programs in the control panel

    • Click Start, select Control Panel
    • Now, click on programs and select programs and features.
    • Find the Display card Driver.
    • Display driver card click right and select Uninstall.
    • Restart the computer after the uninstall is complete.

    Step 3:

    Download and install the latest drivers for the graphics card from the Web site of the manufacturer (ASUS)

    Hope it would help. If the problem persists post returns with the required information, the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

    Kind regards

  • Persistent black screen after startup on Satellite Pro A210 (PSAFHE)

    Need help, need advice on how to solve a persistant problem with black screen after put into initial service.

    Initially its fine but after the initial Toshiba of the screen just goes black, and the rest in this way, the PC stays on. Have you tried F8 options but all result in the same.

    Help please.

    Hello

    You can access the BIOS by pressing F2?
    Boot from a boot as Recovery DVD disk?

    If both is not possible, I'm afraid you have a serious hardware problem m.
    In this case, I get just speculate on the affected parts. Maybe his problem GPU or motherboard who knows

  • Black screen after flashing to latest BIOS

    Nothing but black screen after flashing the latest bios (fan, leds work)...

    I can do, or that of new bios/motherboard can help? (I tried to rest the battery, press F8...) Thanks in advance

    I presume that the BIOS is doomed. What you need is a professional help with this then contact the nearest service provider and ask for help.

    By the way: check this forum using the advanced search option. In the past, I have seen several interesting discussions on BIOS recovery. I m quite skeptical on this subject but maybe you will be lucky and find the solution.

  • Black screen after the mode 'sleep'

    My laptop never wakes fashion "Eve" and just keep with the dreaded black screen.

    If anyone has had this problem or have solutions?

    I am currently using a hardware, operating system.

    This message can help,

    http://h30434.www3.HP.com/T5/notebook-lockups-freezes-hangs/Pavilion-DV6-black-screen-after-sleep-mode/TD-p/527033

Maybe you are looking for

  • Portege R700 - quick as lightning!

    Despite some reports of 'flaky' and similar operation, I decided to tear off my HARD drive and slap a SSD and W7 Pro 64 bit on my portege R700-184 flippin heck its the thing to the top fast! I used a base of sandforce OCZ Vertex 2 120 GB drive and th

  • Apple ID in Bangladesh

    How can I create an Apple ID in Bangladesh with credit card?

  • change the processor?

    I have a compaq sr2010nx, it has an amd sempron 3400 + socket 754. I want to know is can I put a 2.0 ghz instead it? It is also an amd sempron. Same socket. If this is not the case, what size should I go to? Mine is reallly slow there a mhz 991 in it

  • Why is there no option to burn pictures on a dvd in the photo gallery for windows vista

    I try my best to find a way to BURN a DVD of my photos that I had downloaded in windows live photo gallery, or windows photo gallery.I even try to find a way to burn pictures on a DVD via windows developer. NO LUCK.It isn't even an option anywhere to

  • Mini speaker shows not all light

    My mini speaker x does not show a blue or red light on the side and now won't play and when I try to charge it to the laptop it stops the laptop immediately, it is as if she has just died, what to do