Black screen after getting the flashing message

I have a Pavilion dv6 3011so. During the execution of a program the computer gets a black screen with a message that says that the touchpad, keyboard will be no function during the flash process. Please do not feed the system until the flash compalete.

But the process took a long time and I have power which crashed the computer. Now I can not start. I get a black screen and not any other sign of the PC.

I think that you tried to update the BIOS, please read this article to solve this problem

http://support.HP.com/us-en/document/c02693833

Tags: Notebooks

Similar Questions

  • I often get frequent blue screens on internet sites. Blue screen too fast for me to record specific error message. How can I put an end to the blue screen to get the error message?

    frequent blue screens often to internet sites.  Blue screen too fast for me to record specific error message.  How can I put an end to the blue screen to get the error message?

    en blue screen too fast for me to record specific error message.  How can I put an end to the blue screen to get the error message?

    If your computer is restarted when the BSOD appears, then you must change the by default for what to do in case of system error. It is easy to do, but takes a lot of mouse clicks to get there:

    Start | Control Panel | System | Advanced system settings (need for credentials for the administrator to spend here |) Advanced | Startup and recovery / settings.

    On this screen, uncheck the box under system failure that says automatically restart. The next time the BSOD appears, your computer will not do anything else until you press the reset button, so you'll have all the time you need to read and copy the error codes. Paste here, verbatim, and someone should be able to point in the right direction.

    ``````~~~~`````

    In the control panel choose reports on problems and Solutions (problem of type in the START search box), go to historical problem, right-click your error and choose check for the Solution. You can also examine the details.

    In administrative tools, choose the reliability and performance monitor and click on MonitoringTools then the reliability monitor (type reliability in research on Start). This list is a chart of the software installs, uninstalls, updated Windows and crashes by date. See if your plant has started to happen after you installed or uninstalled something.

    It may be useful to eliminate equipment defects

    Type of memory in the search box of start and choose Memory diagnosis

    In a command prompt (type command in the start search box then right click and choose Run as administrator) type

    CHKDSK c: /r

    If you have more than one drive replace C: with the other drive letters.

    Search for corrupted files by typing at the command prompt

    sfc/scannow

    You can clean boot troubleshooting http://support.microsoft.com/kb/331796

  • Black screen after entering the password to open Windows Vista

    I need help for vista windows Desktop to appear. All I get is the black screen after I get my password

    Aziz I apologize not responding earlier! In fact, I had to do was reboot the pc! I wish I knew exactly what it was that I did!

  • J5B54EA #ABU: help black screen after put the password in

    I turn on my laptop and everything is normal until after I type my password and it is supposed to go to my office instead it goes straight to a black screen, I can not access my Start menu ive had the laptop 4 months on its never had any problems and was working fine an hour ago

    Hello

    Try this and let me know.

    Boot the computer normally and log.

    Black screen, hold down the ctrl and alt keys and press delete.

    Select Task Manager.

    At the bottom left, select details (if it is not already selected).

    Click in the header of column Nsoul to organize the processes in alphabetical order.

    Look for an entry called to run once Wrapper (RunOnce.exe) - If you see it listed, right-click on it and select end task.

    The office is now show?

    If this is the case, download Autoruns on the following link and save it in your downloads folder.

    http://download.sysinternals.com/files/Autoruns.zip

    When you have that, open your download folder, right-click on the folder zipped to Autoruns, select "extract all...". "and in the next window, click Extract.

    A new window will open displaying the extracted content.  The application you must launch is the 2nd in the list (in format autoruns 636ko) but this by right clicking on it and selecting 'Run as administrator' -click 'Yes' to the uac prompt.

    Scroll down the list until you find the entrance to RunOnce (it may well be 2 entries) and Remove the tick (s) in the box next to it.

    Restart computer and see if it boots now on the desktop.

    Kind regards

    DP - K

  • Pavilion dv6000: black screen after getting a virus and reboot

    I got a virus and after that I restarted my computer it gets to a black screen. No cursor, not even the HP logo flashes on the screen and more.

    I created bootable usb and dvd discs and tried to start with them and neither one of them work. Also, I can not for the installation or the bios.

    I don't have any other ideas for what to do. Any help is appreciated.

    Hello @sepi,

    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums, I would like to draw your attention to the HP Forums Guide first time here? Learn how to publish and more.

    I came across your post about the black screen problem and he wanted to help!

    For starters, can you provide me with the product number of the laptop?  Here is a link that you can use that will help you find your model and product number:
    How can I find my model number or product number?

    In the meantime, you may need to perform a system restore, to put the computer laptop back to the factory setting.  First of all, try to review the following document and let me know how it goes:

    Computers laptops HP - computer won't start (Windows 7, Vista, XP)

    Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

    Have a great day!

  • Having the black screen after put the password in

    Hello, my HP model number 15do11TU, product code F6D42PA #ABG has a black with the cursor screen after that I entered the password. I can open the Task Manager but when I click on switch to try and get anything that is open, nothing happens. I tried to remove the battery and powering off/on power but still nothing, help!

    Hello

    Try the following.

    Stop of the laptop and leave it like that for 10 seconds.

    Tap here to f11 as soon as you press the power button until you see a message "Windows is loading.

    On the next screen, select your Keyboard Layout and on the next screen, select Troubleshooting.

    Select 'Advanced Options', and then select System Restore.

    Click on yourcurrent system O and then wait as the system restore window opens.

    Choose a restore point before the problem session opening took place and then proceed to the system restore.

    Kind regards

    DP - K

  • Black screen after using the popular repair disk.

    I have a Dell Latitude D620 XP with SP3.  I installed a utilityAnd repair/tune-up that seemed to go well. Then several hours later, I found it with a black screen and it will not get after the BIOS loading before the black screen drive hard light Charlotte.

    I tried to start safe mode, and the hash of the path works in only about halfway to the bottom of the screen. I tried disable automatic reboot, then Safe Mode w / networking. still stuck... I use another dell latitude which has its own problems.

    He was left in the repair shop for 10/11 with windows files corrupted and missed all of the updates. When the community hands me the answer to my loop of black screen on the xp operating system, because I am sure they will be, I'll get into trouble I have with the machine running Vista.

    There is a relevant reason to denote the unit D630 Vista OS. I had exchanged batteries because the update of flash plaqyer needed a good battery to install successfully, and vista units battery will not take a charge.

    .

    Hello

    ·         You will remember to do recent changes on the computer before this problem?

    ·         Do you mean that the battery of your laptop Windows Vista does not load?

    Response with above information to better help you.

    I suggest you to follow the steps in the link and let us know the State of the question:

    http://support.Microsoft.com/kb/314503

  • Satellite L350D - 11K: black screen after downloading the Tempro updates

    Hi Forum,

    yesterday, I admitted Tempro download several updates on my satellite L350D - 11K.
    During the last update, it was an update of the firmware, the system crashed, and it no longer starts.

    After removing the battery, the system starts up, but now it has a black screen and I don't know what to do.
    Pressing any key F doesn't show any results and I have no recovery CD.

    Does anyone have an idea what to do?

    Thxxx in advance

    Hello

    I don't know why it happened, but if the short workaround solution posted by boarder will not help, so I see good opportunities to contact the ASP in your country for assistance.

    > During the last update, it was an update of the firmware, the system crashed, and it no longer starts.
    You're talking about the firmware update
    Maybe it was a BIOS update which failed and so the laptop will not start again
    As already said in this case that only the ASP technician could help you.

  • Black screen after updating the BIOS on the Satellite A200 - 12 X

    Hi people, I have a Satellite A200 - 12 X and get me some problems when I try to install the latest version of the bios.
    Today, I see the new driver bios here in the drivers of toshiba, the version of the 08/07/07.
    I have download and start installing, in the middle of the border as usual in windows vista gives me problems, and I complete the configuration of the bios.
    Restart the notbook and give them a black screen and nothing else.
    I take out the power cable and try turn turn it on if advance again once and nothing, turn on the power tube and read the dvd, but don't go to windows or other place, just a screen backl.
    Can someone tell me what is taking place and how I can fix the situation please.

    Hello

    It seems during the BIOS update process, something went wrong and therefore the laptop does not start correctly.
    You should know that the update of the BIOS is always a risky job.

    Unfortunately, you will not be able to solve this problem. You need a help of an ASP.

    As the above user said, contact the service provider allowed in your country and ask for help!

    Good luck

  • Black screen after opening the lid - Pavilion g6

    Hello, I need help. I bought my laptop a few days ago and installed Windows 8.1.  When I closed my lid and opened after a while the screen remained black, so I had to force close button and restart. I tried to change the power plan settings to "Choose the closure of the hood", and it always ends the same way "Black screen", does nothing. This is a brand new laptop and it is that wories me. It must be a software problem, I hope that you guys could understand.

    Thank you Marko

    Finally, I found a solution.

    I did Update my Windows and everything works fine from that point.

  • Black screen after leaving the computer idle for some time.

    Original title: Black screen

    Laptop screen starts to turn black every few seconds so I don't use it to take a short break.  The only way to get back the screen is to move a finger on the mouse pad, otherwise, it is just black.  The only way to stop what is happening is to switch off the laptop, wait a few moments and then turn on laptop.  But if I take another short break, this cycle repeats.  Any ideas please.

    Hello

    To provide the proper resolution, I would need more information on your side.

    (1) did you last changes made on the computer prior to this problem?
    (2) did you put the screensaver in a vacuum?
    (3) do you have any particular power on your computer(sleep/hibernate) model?
    This problem can occur if the screen saver is put under vacuum.
     
     

    I suggest you to set the screen saver because none and check if it helps. To configure the screensaver to zero, follow the steps described in the article.

    Change your screen saver
    http://Windows.Microsoft.com/en-us/Windows7/change-screen-saver

    Hope this information helps. Answer the post with an up-to-date issue report to help you further.

  • Half rest black screen after removing the update

    Hi, I'm very inexperienced that I just took in video editing so bear with me when I don't know what to do.

    On a recent thread, the cause of the upper part of the screen is black has been on a Microsoft update, I had removed the other day and correctly solved the problem.

    However, after opening the program (Adobe Premiere Pro 2.0) today I imported a file into a new project that resulted in half top in black again. Yes, my files are in WMV, because I am just a YouTuber and the format fits to my basic editing and shooting very well (I've seen a lot of arguments about how "dumb", it is to use this format) and this is what format my camera braces on. I made sure the update does not occur, but the question is back. Help?

    -Katie

    the 1st forum for Agency 2 http://forums.adobe.com/community/premiere/premierepro_previous?view=all

    2nd, search for Microsoft http://search.microsoft.com/search.aspx?mkt=en-US&setlang=en-US

  • Pavilion dm4-black screen after opening the cover of the fashion watch

    Pavilion dm4-3000tx

    Windows 7 (64-bit)

    When I close the lid of the laptop and re - open the screen remains black. the sounds keep playing and if a video is palyed before closing the lid, he also plays with the play/pause button, but there is no graphics on the screen, only a black screen while all runs in the background. I have to restart the machine with the power button then.

    action dafault on the cover is the sleep and re - open the cover and press a button he wakes up, but the screen is still black. problem when I change the dafault action: do nothing

    Hi zineb. I understand that your computer is well problems wake up sleep mode. I found a thread from Microsoft that contains a good amount of troubleshooting for this issue: http://answers.microsoft.com/en-us/windows/forum/windows_7-performance/blankblack-screen-on-wake-up-from-sleep/6fdca378-6279-486e-8e7f-6e90a3f9d42f

    Please inform me of your results when the diagnosis is complete. I'm only here to help!

    Mario

  • Dv7t-3000 Black Screen after that the Bios flash (Bios CORRECT) what are my options?

    Hi, I have a dv7t-3000 and recently, I installed windows7 ultimate and so I started to install all my drivers to catch up with my laptop. I flashed my bios and the computer went to reboot and installed 76 updates before you stop. I went to bed and woke up and when I turned my count on the screen is BLACK. Without backlight or nothing. Leads to come, wireless is disabled, I hear the fan and do not know if the hard drive does not work. I don't see why it wouldn't. I tried a HARD reset and taking the ram and put it back in. Neither have worked. I even tried to hold the windows key + B when the computer turns on but no luck. Any ideas? Any help would be greatly appreciated.

    Fixed it by resetting CMOS battery. =)

  • Satellite A200-13R - black screen after cleaning the fan

    Model name: Satellite A200-13R
    Model no: PSAE0E-011014GE

    I clean the fan, and I put new thermal paste to the processor. After finishing this job button press / the laptop works but the screen is black. The laptop shows that read the hard drive and the processor works well. I'm trying to remove the battery, disconnect the power, hold the button works / power off for 60 seconds, turn on computer with power plug, then stop, add the battery and restart * but the screen is always black *. I try to press Fn + F5 reboot screen * but again is black *.

    Any solution please?

    Thank you

    Nick

    You have disconnected the display while you cleaned up the laptop?
    Are you sure that the display is connected correctly?
    Check the cable?

    > The laptop shows that read the hard drive and the processor works well.
    How do you know that? Flashing LED HDD?
    You know, it's not easy to say what may be the problem.

    You can also try testing with external monitor.

Maybe you are looking for