Black screen after on native screen only hp logo, but the external monitor is ok

Similar Questions

• Satellite P300 - screen is broken - how activate the external monitor

  My screen is completely broken.
  I hung on a desktop to the laptop monitor.
  I need to know to turn on the broken and the other external.

  I turn on and I am looking for an a little glowing screen and cracked and broken.
  I don't know this may be to do I don't know what buttons to push because I see a screen.
  IHIS, this is my first Forum ever thanks!

  Hi mate

  I recommend using the FN + F5 key combination
  You can use it to switch to output the external monitor or TV.
  This key combination supports several options:
  -screen internal + external display
  -external display only
  -TV out
  -etc...

  You have to press FN + F5 several times in order to get the right output.

• Satellite M30X-111 screen does not display anything but the external monitor works

  My laptop just screen does not display anything (like when the computer is turned off), but when I connect the external monitor, then the desktop is displayed on this screen. I tried to recover the laptop using the recovery disk and it worked again, but today, it stopped working again.

  Again, I must plug the external monitor, and after I tried to restart, I continue to pressing F8 but the startup mode is not come, the noise of when you press a button for too long beeps, however, the monitor of the laptop working again.

  How can I solve this problem?

  What do you do? You want to recover the laptop?
  If Yes, you n press any F8 but you will need to boot from the recovery CD by pressing the C key immediately after starting the laptop.

  But this question seems that you have accidentally switched to external display.
  I recommend checking the Fn + F5 option. This combination allow you to switch between the display and the external monitor.

• Unable to get the maximum screen resolution when you use the external monitor

  Hello

  I use Windows 8 on laptop ASUS K55A. I use an external monitor (Samsung SyncMaster 2233BW). Everything works fine except that I do not get the maximum resolution on the external display. The only way I see a sort of an overview of the good resolution is when I choose "extend these screens", but it's very uncomfortable when there's always one screen, I don't actually see.
  How can I increase the resolution of the screen on the external screen? (now, it's on 'show desktop only on 2')
  Thank you!

  I use Windows 8 on laptop ASUS K55A.

  So first a Bing search finds that ASUS K55A probably has the chip Intel HD 4000

  Then,

  https://communities.Intel.com/thread/30360

  (BING search engine for)
  Two monitors specifications Intel HD Graphics 4000

  )

  Graphics card Intel doesn't support double bond, so 1920 x 1200 is the maximum for DVI and HDMI, 2560 x 1440 is only possible with a display port. This is indicated in each product page.
  

• Satellite P200 - LCD is black but the external monitor is OK

  Hello

  I have a Toshiba P200 17.1 ", LCD has gone black,
  You can see the backlight in the background.
  It turns on sometimes.

  I checked with an ohmmeter lead LCD and it seems to be ok, is not sure that that is the problem.
  When I connect it to an external it follow the work ok, made his first appearance on the backlight.

  I suspect it is the LCD screen, but I would check with certainty before I part with my hard earned money.

  Question, I have a spare screen Latitude D600 14.1 ", with the same connector on the LCD (30pin)
  Could I use with inverter P200 to see if there is a signal / MoBo to the power connector.

  Thank you

  Spike

  Hello

  You must use the display 17.1.
  Your Latitude D600 screen is 14.1 "so it will not work.

• Screen saver does not not on external monitor

  I recently bought an Acer Aspire 5742Z under Windows 7 Home Premium (Service Pack 1).

  The screen saver (one of the pre-loaded Windows screensavers) works fine on the computer screen, but he did not come if I connect an external LCD display.

  I read that this kind of problem may be related to devices such as the mouse/keyboard wireless. However, in my case I have that keyboard/mouse USB connected to the laptop via a USB HUB. No wireless device.

  Any suggestions?

  Thank you in advance.

  Hello

  I did work on the external display.

  All I had to do was re - run the performance index test. I don't know why, but after having done this integrated screen saver released normally on the external monitor.

  Concerning

• PCoIP black screen only with client software, only external connections

  Hello.

  Everything is in the title

  I have an infrastructure with ESX 4 5.0 and a 5.1 vCenter; Gateway security VCS 5.1.2 and 1 2 (associated with the second VCS); The view composer.

  When the connection between the local network using the internal address of VCS, everything works fine.

  When the WAN connection, using the external URL (www.mycompany.com, with an external IP address, registered in the public DNS): everything works very well with an IOS device, or a customer zero (Teradici chipset). but when he connects with a customer display Windows, authentication pass well, but after you have logged in, the client displays a black screen. It seems that the session is not present in the view manager.

  Does anyone have an idea?

  Thanks in advance for your help.

  Best regards.

  Stéphane Grimbuhler

  Virtualization and storage architect (VCP / VCAP-DCA)

  VMware instructor (VCI)

  My Blog: www.virtualgeek.ch

  Do you have all the necessary ports open in any firewall between the end user and the connection manager / ESX farm? The client software must open RDP (3389) addition to the PCoIP ports.

  Ed

• Tecra M3: black screen on startup, the vertical lines on the external monitor

  Hi all

  I searched a lot on the Internet for a solution to this specific problem, I have, but did not find a thread
  with exactly the same problem. I have a Toshiba Tecra M3 with Windows XP SP 3. Two weeks ago, I encountered problems with the commissioning. After a couple of times to restart it would work. Then it became worse... When I try to run I see no splash... the screen remains black. If I press the power button, I hear the fan and CD player but no screen. It is totally black. I know its working because I can go (blindly) in the installation program. Press end, and then press Y and enter. The computer will restart but still no screen.

  I plugged it to an external monitor. Pressing Fn and F5 allows switching. The external monitor shows different
  vertical lines in multiple colors. They change if I go to settings or you try to start windows.

  Does anyone have a solution to these problems?

  I have fear of solution can be given by the service only.
  In my view, this question must be tested properly.

  I can't say for sure, but to me that sounds like a technical question. Without testing you will know for sure what is the problem.
  Here on the forum we can only speculate why this happen.

  As you can see on notebooka? s LCD problem. On external it doesnâ? t properly work as well. It may be a faulty graphics card.
  Try to contact the nearest authorized Toshiba service and speak with the technician.

• Invalid product key, left my computer with a black screen and a cursor of the mouse on the boot.

  A few days ago, I tried to upgrade Windows 7 Home Premium (64 bit) to Windows 10 using the free update. Installation hung at 84% for 2 hours, then restarted, was unable to recover the installation and then could not get back to Win 7. This left us with a black screen and a cursor of the mouse on the boot. The computer would remain in this State for about 10 minutes and then reboot and repeat.

  Fortunately, or so I thought, I had a few CD Windows installation backup from the back to the era of digital river. So I thought I'd install fresh on my empty partition, copy my files and data, and then format the partition with the installation broken on.

  I did, but now he tells me that my product key is not valid and cannot be activated. The product key came on a real label on the PC when we bought it.

  The key is for X 16-96072. I installed X 17-58997 (Windows 7 Home Premium x 64 with SP1 (u)). I don't know what is the problem with the key? Should I have installed without the (u)?

  One key 25 digits grouped in 5 sequences of 5 characters not X 17-58997.

  To analyze and solve problems for Activation and Validation, we need to see a full copy of the diagnostic report produced by the MGADiag tool (download and save to the desktop -http://go.microsoft.com/fwlink/?linkid=52012 )
  Once downloaded, run the tool.
  Click on the button continue, after a short time, continue button will change to a copy button.
  Click the copy button in the tool (ignore the error at this stage) and then paste (with r-click and paste or Ctrl + V) in your message.

• Satellite U405 black screen when I surfed on the internet

  Madam, Sir, I am a student in the third year and my laptop has a problem, I need help. This will be the black screen when I surfed on the internet for over 3 hours. Why?

  I guess my laptop battery is the key to the problem and a few friends recommend a battery for me web.
  What do you think about this?

  Your ad is a little strange to me.
  How you can surf internet if the screen is black? I mean, it's not logical for me.
  What Toshiba laptop model do you have?

• HP Pavilion HPE h8 - 1213c: black screen of death because of the new graphics card (EVGA geforce gtx 960)

  I just bought a new card (EVGA geforce gtx 960) to kick some butt. But during installation, it seems to be held on a black screen of death? Not the most fun to see... in any case, I had asked the store clerk if it would work and he said to, but it doesn't seem like it does... Is there a new BIOS I should download or something? Any help would be nice...:.

  My computer is a HP Pavilion HPE h8 - 1213c

  The graphics card is an EVGA geforce gtx 960

  If you have both. You can use one or. PIN 8 can be used as a 6 pin as well.

  http://www.EVGA.com/products/ProductList.aspx?type=0 & Family = GeForce + 900 + Series + Family & Chipset = GTX + 960

  2 smaller cards use a single PIN 6. The rest use a single 8 pin.

• my screen shows a black screen and says to enter the system password, how do I reinstall windows if the pc is back to factory settings and wonder a system password

  Don't let me do anything, as soon as I turn on my pc, it goes to the black screen telling me to enter the system password

  It looks like your BIOS password "may" be set.

  What brand of computer do you have?

  If you have an antistatic grounding cable and are comfortable opening your case, you "can" be able to follow a procedure in the manual of your motherboard to reset such password.   If you choose to do so, please be careful because you do so at your own risk.

  WARNING:

  This response comes with absolutely no warranty express or implied.  The author of this response in any way be held responsible for any financial or physical or emotional loss that readers might incur as a result of the advice of this response.

• Start-up problems: I have a black screen when I log in the menu

  When I start my computer, I get a black screen when I log in the menu. I can still access the computer on safe mode, but I can't find a solution. Antivirus Avira found no detection, so I don't think that's associated virus.

  Follow these steps to try to solve your problems of boot.

   

   

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Scan with Malwarebytes in SafeMode with networking to ensure:

  http://www.Malwarebytes.org/MBAM.php

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  Download, install, upgrade and scan once a fortnight...

  How to use Malwarebytes once it is installed and updated:

  1. open Malwarebytes > click the update tab at the top > get the latest updates.

  2. on the Scanner tab, make sure that thePerform quick scan option is selected and then click on theScan button to start scanning your computer

  3 MBAM will now start to scan your computer for malware. This process can take some time.

  4. when the scan is complete, a message box will appear

  5. you must click on the OK button to close the message box and continue the process of Malwareremoval.

  6. you will now be at the main scanner screen. At this point, you must click on the button toview the result .

  7. a screen showing all of the malware displayed the program that is

  8. you must now click remove selection button to remove all the listed malware. MBAM will now delete all of the files and registry keys and add them to the programs quarantine. When you remove files, MBAM may require a restart in order to eliminate some of them. If it displays a message stating that it needs to restart, please let him do. Once your computer has rebooted, and logged in, please continue with the remaining steps.

  9. when MBAM has finished remove the malware, it will open the scan log and display it in Notepad. See the log as desired, and then close the Notepad window.

  10. you can now exit the MBAM program.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  It's Vista Security Forum.

  If the above does not she, repost in the Vista repair and recovery Forum:

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/threads

  See you soon.

  Mick Murphy - Microsoft partner

• Compaq presario cq42 screen becomes black when the external monitor is unplugged

  Compaq presario cq42-137tu running windows 7 32 bit.

  I've been using a connected external display on the vga port and now every time I disconnect the monitor and restart the laptop the laptop LCD screen will display the original message of compaq and the black windows boot screen with the logo but then turns off. If I reconnect the extrnal monitor it will work fine (even if the external monitor is turned off)

  The screen of the laptop works fine without the external monitor connected in safe mode.

  I used both the HP support and the setting in the display panel to select single monitor and set the display on the screen of the laptop, but every time that the external monitor is not connected the screen turns off. The external screen does not need to be turned on, just to connect to the laptop monitor work. I also tried to download the graphics driver and put it back.

  If your laptop is a ComPaq base model then there is the (built-in) Intel UMA / GMA 4500 M - GL40 chipset with video memory sharing and you should consider downloading and installing the driver Intel graphics high definition (HD).

• Icons and black screen that appears when published the missing LMS

  Hello

  I tried to search online, but need some advice on how to solve a problem of publication I encounter.

  Captivate 7

  SCROM 1.2

  When I run a SWF file via my IE browser, I have no missing icons or black screen that appears. During the generation of the content to publish SWF with HTML5, it passes through successfully.

  When it is published through LMS, couple of slides in the length of the content, I am facing some missing icons and black screen. I read an article saying check on imsmanifest.xml that could help solve the problem. But watch and read the code, I am pretty well confused to determine what lack us here.

  Comments or the recommendation how I can solve this problem?

  Concerning

  AJ

  Publish your Cloud SCORM LMS SCORM online and test the functionality here.  If he plays as expected, the problem is with your own LMS and you must get their technical staff working on the problem.