Black screen after opening the software of the camera on Satellite P200 - 17 c

Similar Questions

• Black screen after opening the lid - Pavilion g6

  Hello, I need help. I bought my laptop a few days ago and installed Windows 8.1.  When I closed my lid and opened after a while the screen remained black, so I had to force close button and restart. I tried to change the power plan settings to "Choose the closure of the hood", and it always ends the same way "Black screen", does nothing. This is a brand new laptop and it is that wories me. It must be a software problem, I hope that you guys could understand.

  Thank you Marko

  Finally, I found a solution.

  I did Update my Windows and everything works fine from that point.

• Pavilion dm4-black screen after opening the cover of the fashion watch

  Pavilion dm4-3000tx

  Windows 7 (64-bit)

  When I close the lid of the laptop and re - open the screen remains black. the sounds keep playing and if a video is palyed before closing the lid, he also plays with the play/pause button, but there is no graphics on the screen, only a black screen while all runs in the background. I have to restart the machine with the power button then.

  action dafault on the cover is the sleep and re - open the cover and press a button he wakes up, but the screen is still black. problem when I change the dafault action: do nothing

  Hi zineb. I understand that your computer is well problems wake up sleep mode. I found a thread from Microsoft that contains a good amount of troubleshooting for this issue: http://answers.microsoft.com/en-us/windows/forum/windows_7-performance/blankblack-screen-on-wake-up-from-sleep/6fdca378-6279-486e-8e7f-6e90a3f9d42f

  Please inform me of your results when the diagnosis is complete. I'm only here to help!

  Mario

• PAVILION 15: BLACK SCREEN WHEN OPENING THE LID ON WAKE UP

  THE LAP TOP SHOWS A BLACK SCREEN WHEN OPENING THE LID.

  THE SCREEN WORKS WELL WHEN PUT ON, BUT ON CLOSING THE LID FOR A WHILE AND RE OPENING STARTING THE ENGINE AND THE LIGHTS FLASH BUT THE SCREEN IS BLACK.

  TO RETRIEVE THE SCREEN POWER BUTTON MUST BE PUSHED AND WHEN FLASHING JUST AGAIN PUSHED THE SCREEN THEN WAKES UP.

  THIS FIRST STARTED WINDOWS 10 CHARGE BUT WHE I GO BACK TO THE FACTORY SETTINGS AND WHICH IS 8.1

  I TRIED TO REMOVE THE BATTERY TO RESET AND REMOVE AND REPLACE MEMORY CARDS AS SUGGESTED BY SOME SITES I RELOADED ALSO BIOS AND I STILL HAVE THE PROBLEM.

  I WOULD BE VERY GREATFUL FOR ANY HELP.

  Hi @lily-springer,.

  Thank you for your update.

  I am pleased that now when you close the lid, it does nothing.

  You don't have the possibility to contact the HP support for assistance. They can access your system remotely to help overcome the difficulties.

  Contact HP to Contact HP Support assistance

  Good luck!

• Black screen after entering the password to open Windows Vista

  I need help for vista windows Desktop to appear. All I get is the black screen after I get my password

  Aziz I apologize not responding earlier! In fact, I had to do was reboot the pc! I wish I knew exactly what it was that I did!

• J5B54EA #ABU: help black screen after put the password in

  I turn on my laptop and everything is normal until after I type my password and it is supposed to go to my office instead it goes straight to a black screen, I can not access my Start menu ive had the laptop 4 months on its never had any problems and was working fine an hour ago

  Hello

  Try this and let me know.

  Boot the computer normally and log.

  Black screen, hold down the ctrl and alt keys and press delete.

  Select Task Manager.

  At the bottom left, select details (if it is not already selected).

  Click in the header of column Nsoul to organize the processes in alphabetical order.

  Look for an entry called to run once Wrapper (RunOnce.exe) - If you see it listed, right-click on it and select end task.

  The office is now show?

  If this is the case, download Autoruns on the following link and save it in your downloads folder.

  http://download.sysinternals.com/files/Autoruns.zip

  When you have that, open your download folder, right-click on the folder zipped to Autoruns, select "extract all...". "and in the next window, click Extract.

  A new window will open displaying the extracted content.  The application you must launch is the 2nd in the list (in format autoruns 636ko) but this by right clicking on it and selecting 'Run as administrator' -click 'Yes' to the uac prompt.

  Scroll down the list until you find the entrance to RunOnce (it may well be 2 entries) and Remove the tick (s) in the box next to it.

  Restart computer and see if it boots now on the desktop.

  Kind regards

  DP - K

• Half rest black screen after removing the update

  Hi, I'm very inexperienced that I just took in video editing so bear with me when I don't know what to do.

  On a recent thread, the cause of the upper part of the screen is black has been on a Microsoft update, I had removed the other day and correctly solved the problem.

  However, after opening the program (Adobe Premiere Pro 2.0) today I imported a file into a new project that resulted in half top in black again. Yes, my files are in WMV, because I am just a YouTuber and the format fits to my basic editing and shooting very well (I've seen a lot of arguments about how "dumb", it is to use this format) and this is what format my camera braces on. I made sure the update does not occur, but the question is back. Help?

  -Katie

  the 1st forum for Agency 2 http://forums.adobe.com/community/premiere/premierepro_previous?view=all

  2nd, search for Microsoft http://search.microsoft.com/search.aspx?mkt=en-US&setlang=en-US

• How can I fix a print black screen after downloading the adobe reader software?

  I downloaded acrobat and reader weekend last on my mac.  I noticed when I go to print a pdf file, the preview screen is black and when I print in fact, it's black.  How can I fix this please?

  Quit Safari

  Go to Mac HD/Library/Internet Plugins

  Search for "AdobePDFViewer.plugin" and "AdobePDFViewerNPAPI.plugin".

  

  'Trash' together. You will need to enter your admin password.

  Empty the trash.

  Restart Safari and open the PDF file.

  It should be OK.

• Having the black screen after put the password in

  Hello, my HP model number 15do11TU, product code F6D42PA #ABG has a black with the cursor screen after that I entered the password. I can open the Task Manager but when I click on switch to try and get anything that is open, nothing happens. I tried to remove the battery and powering off/on power but still nothing, help!

  Hello

  Try the following.

  Stop of the laptop and leave it like that for 10 seconds.

  Tap here to f11 as soon as you press the power button until you see a message "Windows is loading.

  On the next screen, select your Keyboard Layout and on the next screen, select Troubleshooting.

  Select 'Advanced Options', and then select System Restore.

  Click on yourcurrent system O and then wait as the system restore window opens.

  Choose a restore point before the problem session opening took place and then proceed to the system restore.

  Kind regards

  DP - K

• Satellite L350D - 11K: black screen after downloading the Tempro updates

  Hi Forum,

  yesterday, I admitted Tempro download several updates on my satellite L350D - 11K.
  During the last update, it was an update of the firmware, the system crashed, and it no longer starts.

  After removing the battery, the system starts up, but now it has a black screen and I don't know what to do.
  Pressing any key F doesn't show any results and I have no recovery CD.

  Does anyone have an idea what to do?

  Thxxx in advance

  Hello

  I don't know why it happened, but if the short workaround solution posted by boarder will not help, so I see good opportunities to contact the ASP in your country for assistance.

  > During the last update, it was an update of the firmware, the system crashed, and it no longer starts.
  You're talking about the firmware update
  Maybe it was a BIOS update which failed and so the laptop will not start again
  As already said in this case that only the ASP technician could help you.

• Black screen after using the popular repair disk.

  I have a Dell Latitude D620 XP with SP3.  I installed a utilityAnd repair/tune-up that seemed to go well. Then several hours later, I found it with a black screen and it will not get after the BIOS loading before the black screen drive hard light Charlotte.

  I tried to start safe mode, and the hash of the path works in only about halfway to the bottom of the screen. I tried disable automatic reboot, then Safe Mode w / networking. still stuck... I use another dell latitude which has its own problems.

  He was left in the repair shop for 10/11 with windows files corrupted and missed all of the updates. When the community hands me the answer to my loop of black screen on the xp operating system, because I am sure they will be, I'll get into trouble I have with the machine running Vista.

  There is a relevant reason to denote the unit D630 Vista OS. I had exchanged batteries because the update of flash plaqyer needed a good battery to install successfully, and vista units battery will not take a charge.

  .

  Hello

  ·         You will remember to do recent changes on the computer before this problem?

  ·         Do you mean that the battery of your laptop Windows Vista does not load?

  Response with above information to better help you.

  I suggest you to follow the steps in the link and let us know the State of the question:

  http://support.Microsoft.com/kb/314503

• Black screen after updating the BIOS on the Satellite A200 - 12 X

  Hi people, I have a Satellite A200 - 12 X and get me some problems when I try to install the latest version of the bios.
  Today, I see the new driver bios here in the drivers of toshiba, the version of the 08/07/07.
  I have download and start installing, in the middle of the border as usual in windows vista gives me problems, and I complete the configuration of the bios.
  Restart the notbook and give them a black screen and nothing else.
  I take out the power cable and try turn turn it on if advance again once and nothing, turn on the power tube and read the dvd, but don't go to windows or other place, just a screen backl.
  Can someone tell me what is taking place and how I can fix the situation please.

  Hello

  It seems during the BIOS update process, something went wrong and therefore the laptop does not start correctly.
  You should know that the update of the BIOS is always a risky job.

  Unfortunately, you will not be able to solve this problem. You need a help of an ASP.

  As the above user said, contact the service provider allowed in your country and ask for help!

  Good luck

• Black screen after getting the flashing message

  I have a Pavilion dv6 3011so. During the execution of a program the computer gets a black screen with a message that says that the touchpad, keyboard will be no function during the flash process. Please do not feed the system until the flash compalete.

  But the process took a long time and I have power which crashed the computer. Now I can not start. I get a black screen and not any other sign of the PC.

  I think that you tried to update the BIOS, please read this article to solve this problem

  http://support.HP.com/us-en/document/c02693833

• Black screen after leaving the computer idle for some time.

  Original title: Black screen

  Laptop screen starts to turn black every few seconds so I don't use it to take a short break.  The only way to get back the screen is to move a finger on the mouse pad, otherwise, it is just black.  The only way to stop what is happening is to switch off the laptop, wait a few moments and then turn on laptop.  But if I take another short break, this cycle repeats.  Any ideas please.

  Hello

  To provide the proper resolution, I would need more information on your side.

  (1) did you last changes made on the computer prior to this problem?
  (2) did you put the screensaver in a vacuum?
  (3) do you have any particular power on your computer(sleep/hibernate) model?
  This problem can occur if the screen saver is put under vacuum.
   
   

  I suggest you to set the screen saver because none and check if it helps. To configure the screensaver to zero, follow the steps described in the article.

  Change your screen saver
  http://Windows.Microsoft.com/en-us/Windows7/change-screen-saver

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• Re: NB100-11R: black screen after installing the Vodafone software

  Since the installation of the software Vodafone to enter the internet, my screen remains black.
  The netbook works fan runs well, it's just the typical noises when starting.
  I don't know what it can be broken.

  Would need to help, you have a suspicion which can be?

  Thank you
  Florentin

  Hello

  It seems that this software confused your OS.
  Try this;
  Start Notepad, and then press F8. Usually, the Advanced Boot Menu should appear.
  Now you should choose the option: last good configuration.

  Alternatively, you can try to start the computer in safe mode. The option can also be selected in the Advanced Start Menu

  Select this check box.