Black screen after startup - Satellite A105-S4334

Similar Questions

• Persistent black screen after startup on Satellite Pro A210 (PSAFHE)

  Need help, need advice on how to solve a persistant problem with black screen after put into initial service.

  Initially its fine but after the initial Toshiba of the screen just goes black, and the rest in this way, the PC stays on. Have you tried F8 options but all result in the same.

  Help please.

  Hello

  You can access the BIOS by pressing F2?
  Boot from a boot as Recovery DVD disk?

  If both is not possible, I'm afraid you have a serious hardware problem m.
  In this case, I get just speculate on the affected parts. Maybe his problem GPU or motherboard who knows

• Black screen on startup Satellite A80

  I get a black screen at startup what is the problem and what is the solution for it? It might have something to do with the cold?

  Hi poly

  Please put more details on the problem, because it s not easy to say what has happened without any detailed information. You hear the operation of the HARD disk or fans?
  Switch you to other devices to display, before this problem occurs?
  Unfortunately it FN + F5 key combination doesn't work if the operating system has started so it could be a malfunction of the equipment. I don t think you can solve this problem by yourself. In this case, the only way is to contact the service.

• Corrupt BIOS V5 531 Acer black screen after startup, f2 and f12 also. Repairable?

  Hello

  Yesterday I tried to install Win 7 if I could play D & D Neverwinter on Arc after using * nix systems study (looking to start a career as an administrator). I had plugged into a power strip that was, unbeknownst to me, turned off and I went to make coffee and watch some news. When I came back to check the progress of my laptop was powered off and since then I havn't been avle start without being blocked at a black screen after the start page of the bios. The f2 and f12 also leads to a black screen, I can not change the boot device or enter the bios Setup.

  Is - fixable at all? For example, is the a key-combo, I can use it to restore from a backup bios? Or, do I have to bring in a technician who can install a new chip bios or flash this old some how? Or did I brick pemanently my device?

  V1.22 is what you want to be part of a unit of Windows 7.

  The problem is if it crashed during the upgrade process, it will take some special tools clearly on the chip on the MB and recharge it with a new BIOS. I would contact your local support team to see what options are available.

• Black screen after startup for 30 sec as if my network is enabled.

  So my problem is that I mentioned above. If I disable my router with its button to completely close and bad to start the computer, my PC starts in 5-7 seconds.

  If I turn on my router my PC goes black screen after the loading screen logo of blue windows and wait like 30 sec or sometimes 1 min, before sharing the login screen.
  I tried to make my static rather than dynamic, same IP occur.

  Hello

  Thanks for the updates.

  Did you check with the router manufacturer to see if the firmware updates are available for the same?

  Since the problem started once you have this connection, you must get in touch with the ISP or router manufacturer to check the issue.

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

• Satellite C660D 15F - black screen after startup

  Satellite C660D 15F

  Hi guys,.

  I have a big problem with my laptop. When I started to-go from sleep - two days ago I heard the computer starts normally but the screen remains black. No mater how many times I tried to restart, the screen shows nothing, no message no picture. The normal operation of the side light remains on but the keyboard lights stay offshore. I can hear the computer normally (the fan etc..).

  I tried to hit SHIFT F8 start buttom on the first night, and the image was on the first attempt when I started the machine and everything seemed normal again! The next few days, I got a black screen once more and the case never worked again, no matter how many times I tried.

  Can someone help me please get out of this mess? Has anyone had a similar problem? How do solve you?

  My machine is now exactly four years.

  Thank you very much for your ideas! I really need to access some files on there!

  Hello

  Disconnect the power and remove the battery. After doing this press the power for 30 seconds about and try to reset your machine. Leave it for a while and try to start with power current only.

• Satellite Pro U200-> black screen after startup

  Hello

  It happens from time to time when I try to start my PLUA1E Satellite Pro U200-02802QS4, then I get a black screen even from the BIOS.
  What is wrong and how to fix this?

  BTW, I already have this BIOS version: P0044v370.exe installed.

  Hello

  This happens from time to time?
  This means that you can not reproduce this problem?

  Hmm that's not easy to say what the issue might be.
  Maybe the BIOS update will help you at the moment you can find BIOS 3, 7 victory on the European driver Toshiba page.
  If you have a lower BIOS version installed, then I recommend an update.

  It is also possible that this problem is related to some of the material; motherboard, screen, etc.
  In this case the part should be replaced but first of all it of necessary to know what part is affected and I think that the technician of the ASP for this

  What do you think???

• My Satellite L505D goes to a black screen after startup

  It seems to boot up properly and everything. It starts Windows 7 and goes to the user selection screen, but since there is only 1 user, it only says: Welcome to the loading circle. But when he tries to load the page office or home or whatever you call, all that happens is the mouse.

  I can move the mouse normally, my anti anti-virus pop ups see the place if necessary. On my last attempt to try to solve the problem, I got my user to open the file, but has happened automatically. I tried taking the battery twice thing. If any ideas on why the screen just looks like a black screen and the mouse visible.

  PS: I use the keys ctrl + alt + del function to get these options appears.

  On this virtual path, it is not easy to understand why all this is happening, but what you can try is to start the operating system in safe mode and roll back the OS to an earlier time to see if it works.

  Can you please try this and post comments.

  Do as a first step. Later, we see what can be done.

• Black screen after hibernation - Satellite Pro A120 mode

  I have the following on my A120 problem:

  My Satellite Pro A 120 with professional vista crashes after I close the lid.
  The current settings in the power management standby is extended when the lid is closed, but I also tried with the sleep settings.

  After I opened my top once again, black screen appears and restart windows.
  Vista offers a solution online after the accident, but nothing appears as a result of the audit.

  Someone had this problem?
  I would appreciate any kind of advice.

  Hello

  I see you are using Vista on this laptop.
  This laptop has been pre-installed with Windows XP. Am I wrong?

  It would be very interesting to know if the same thing happens with the OS pre-installed Toshiba. Please check this!

  That say these issues can be caused by wrong or not entirely compatible graphics driver or lack of MS patches/fixes.

  I recommend checking out the various graphics and update the operating system drivers to the last State

  Best regards

• Black screen on startup - Satellite A200

  Hello

  I have a new Satellite A200-25 x (2 months). Sometimes when I start the work of hard drive, the light is also on, but I have a black screen. The same may appear after a sleep mode.

  Could someone help me and tell what is the problem?

  I put t know what s wrong but I know the solution ;)

  Many users here in the forum have confirmed that the update of the BIOS solves this annoying problem.

  Take a look on the page of European driver of Toshiba. Choose the BIOS compatible and right and then update.

  It should help!

• Black screen after startup (no home screen)

  I was just with the Firefox browser, looking for patterns (no piece, first... use airplane mode and not wifi) and when I clicked on the cog icon in Firefox the buggy device. He showed me a message saying that the home screen has crashed. Now the device boots (displays the logo of LG, the animated Fox, my carrier logo (Vivo, of the Brazil) and Firefox OS logo, but it goes to a blank screen (it is actually a black screen with high bar appearing, showing that it is on that plane and battery.) If I press the home button (or hold it) the phone vibrates, but nothing happens. If I pressed the power button a menu appears with: "Turn airplane MODE" (which is annoying because it is already on, but if I choose what to disable), "Silence incoming calls", "restart", "Power Off". There is the option "Cancel". Each of them works, but I don't know what to do.
  Oh, I tried to bring together the power, them increase the volume and the buttons on the home screen when the phone is off, but nothing happens. It turns when I release the home button. In addition, the volume and lock (or power) buttons works and change the volume / locks the phone...
  What should I do?

  The phone is a LG Fireweb, bought in the Brazil.

  Update, I tried to discount backwards, looks like you need the power, the House hold and volume KEYS until the LG screen appears, then release them. Worked well after the reset (so far).

• L50 - A - black screen on startup satellite

  After pressing power button all I get is a black screen.
  Previously, when I pressed the button that should be up to 10-15 min to get to log in screen
  Is all black, I can hear the fan working.

  The same phenomenon occurs on battery or power.
  Pressing F1 F2 or F8 does nothing.
  Any help or advice please.

  Donald

  What model of laptop and operating system are you using?
  Unplug the power plug, remove the dough and press power for 20 seconds.
  After a few minutes only connect the power supply and try to restart your laptop.
  What happens when you do this?

• Black screen after startup

  every thing is as per normal until after I type my password and it finishes loading. After it is loaded, it does'nt show me any application or my background. It shows me only a black screen and my mouse arrow. I can still see my mouse arrow move and go to the Task Manager. When I press my power button and restart my laptop, the same thing. I can only use safe modes. Can someone help me? By the way im not a computer pro so much more simple answers will help

  Try to start safe mode and run system restore
  to return to an earlier date.
  Click on start Orb, start typing restoration and watch for
  System Restore to show at the top.
  Click on it and restore to an earlier date.

  After back if it works or not.

• HP x 360 310 n3530 g1: black screen after startup

  Hello

  I just bought n3530 g1 310 hp x 360 and upgraded to windows 10. I have a weird question. Since the whenewer then I computer shutdown and boot it up I have black screen. I have to press the power button / stop to put it in standby mode. So I have to tap it again and after the awakening of the screen lights up and I can connect. What is more interesting, does not happen if I restart the system. Then everything works fine. Any ideas?

  Concerning

  HI Marqueee,

  Try this link to third parties for a solution. This a common problem after upgrade Windows 10.

  http://www.thewindowsclub.com/Windows-10-black-screen-problems

• Windows Vista black screen after startup

  Hello!

  I have a pc HP G60 with Windows Vista. After the updated pc, I couldn't use Google Chrome (it crashed and said 'Whoa Google Chrome has stopped working') after reading a few posts, I decided to restore the pc. So once I did this it worked fine. The next day Chrome stopped working again and not so my Mozilla Firefox (it says THAT XPCOM is not found) and I think it was because as I closed the previous night there are more updates running on the computer. So I restored around 4 or 5 times and the last time I have done that and restarted the computer, that he was really a lot of time with a black with just the mouse screen shows so I shut it down by pressing the power down button (bad I know). Now, whenever I turn it on, you can see the Windows loading screen with the small bars at the bottom and then there is a black screen with white text, requesting that the operating mode (safe mode, normal mode, etc.) and then after I decided to use it says loading files or something like that in the white text then just a bunch of names to run it on the screen. However, after that then it goes to a black screen with only the mouse showing. Someone knows how to fix this? I tried pressing the f8 key and I tried pressing the power button for 30 seconds without energy sources and put into market as Sigma_08 says in this post:

  https://social.msdn.Microsoft.

  and the CTRL ALT DEL, but it still does not work. Is there something I can do? D:

  * I tried all modes (normal, security) on the start screen (it opens with this screen every time since I closed it the wrong way.

  Hello! Thanks for the help! I have not tried, but because it turned out that I was pressing f8 at the wrong time, then tried again before the windows logo showed on the screen and was able to use the Repair Options and then system restore and this time he solved the problem! Thank you again for taking time to answer and the link!