Black screen after the Bootcamp

Similar Questions

• Satellite M70 - black screen after the installation of recovery

  So far, what I did is put in the Recovery DVD - ROM product. Then when my computer restarts I was invited to restore my computer failing and said. After that he went through this process, that he told me to remove the disc that I did. Now he only get a black screen after the Toshiba screen that gives me options f2 for Setup and f12 for options.

  I don't know what to do now to make my laptop works again. Help, please.

  Hi Zach_1,

  Have you tried to launch the installation of recovery again? Maybe that something was wrong during the first installation, it might have arrived
  Then retry the recovery facility and see what happens.

  If it doesn't work you should try a normal Microsoft disk so determine if the problem is related to hardware or recovery disk.

• Pavilion 15-243cl after automatic update of windows 8.1 I get a black screen after the home page.

  recently installed an automatic update of windows 8.1. Now, I get a black screen after the home page. I can load the Task Manager and access the internet. tried to go to the SafeMode to start with f8, but several attempts failed. I updated my graphics driver from AMD today and same black screen. I've also restored sytem to an earlier date using the HP utility with results screen - black even after the home page.

  Hello

  Try the following.

  Boot the computer normally and log.

  Black screen, old the ctrl and alt keys and press delete.

  Select Task Manager.

  Click on file and select the new task.

  Type rstrui - also enter a tick in the box for "create this task with administrative privileges" - and click on Ok.

  When the system restore interface is loaded, choose a restore point at least 48 hours before the opening of session question (IE before the last batch of Windows updates have been applied) occurred initially and then proceed to the system restore.

  Kind regards

  DP - K

• Black screen after the windows login

  Hi, I have a HP Pavilion DV7 notebook with Windows 7 Home Premium installed on it. A problem I've noticed is that, once I connect to windows during a boot, the screen is black for about 1-2 minutes. After awhile, explorer.exe would with desktop, taskbar and icons. I am concerned about this 1 to 2 minutes of black screen after the boot as it did not exist previously. I know I have options such as restoring the computer laptop back to the default state, or by using the system restore. However, I don't want to lose all my stuff, and with respect to the restoration of the system, I'm not sure when the problem happening, as it was some time ago. I have read a Microsoft article, (http://windows.microsoft.com/en-US/windows7/why-is-my-screen-black-when-i-start-windows-7) and tried all the steps with the graphics card and the regestry, but nothing seems to work.

  -Task Manager is able to open when the screen is black (shows explorer.exe running)

  -J' have the drivers on the HP support site

  -laptop is HP Pavilion DV7 3024ca

  You will need to login using the method of trial and error. Please uncheck all of the MSCONFIG Startup tab and restart the system. If the black screen issue is resolved, then check out an application every time and restart the system. This will help you to identify the program interfere.

• Get an error message when turning on the computer, then just get a black screen after the message saying cannont find script file c:/windows/run.vbs

  Original title: windows does not

  I have windows 7 and get an error message when turning on the computer, then just get a black screen after the message say cannont find script file c:/windows/run.vbs

  What can I do?

  Enter your bios usually with keys F2 or delete to the first powered

  Use default Optimize can be the F5 key and save and exit,

  Insert your installation disc or flash media and press F8 or F12 to boot on it

  Then use the recovery tools to run the Startup Repair tool.

  http://Windows.Microsoft.com/en-us/Windows/Startup-Repair-FAQ#1TC=Windows-7

• Black screen after the mode 'sleep'

  My laptop never wakes fashion "Eve" and just keep with the dreaded black screen.

  If anyone has had this problem or have solutions?

  I am currently using a hardware, operating system.

  This message can help,

  http://h30434.www3.HP.com/T5/notebook-lockups-freezes-hangs/Pavilion-DV6-black-screen-after-sleep-mode/TD-p/527033

• Vista black screen after the loading bar

  I have the problem that I am assuming that almost all users of Windows Vista have probably experiences - the black screen with the white cursor lonely after the loading bar 'Microsoft Corporation'. Here are the steps that I tried to solve the problem, but have not yet worked:

  • With the help of "last known good configuration" brings back me to the screen and the white slider
  • Go into safe mode which brings back me to the screen and the cursor
  • Activate the video mode low resolution which brings back me to the black screen and a cursor
  • Using Ctrl + SHIFT + ESC to appear during the black screen Task Manager
  • CTRL + Alt + Delete does not work on the black screen
  • I do not have access to the installation CD, as it was preinstalled on the computer

  Yes, as usual, what happened after a windows update - I really should stop waiting for something good to these updates.

  I'm under the original version of Vista Home Premium without service pack - these caused a similar problem, but at least I was able to return the system restore.

  Thank you in advance, I know how useful these forums can be.

  Yes, a new installation of Windows 7 was the way for me. Lucky he composed a back all my documents, however. Thanks for the help all. Unfortunately I have no where near more closely to solve the problem, then when I started.

• Laptop black screens after the latest updates of windows... wil not booting in SafeMode (black screen).

  Windows Vista 64-bit... Black laptop after the latest updates... windows screens will not boot into SafeMode again black screens.

  Hello

  I would suggest trying the following methods and check if it helps.

  
  Method 1:

  Try the steps in the following Microsoft article and check if it helps.

  Windows Vista or Windows 7 unbootable, and the Startup Repair tool does not resolve the problem:

  http://support.Microsoft.com/kb/934540

  Method 2:
  You can refer to the link below and check the drive for errors:
  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

  Warning: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost.

  If the methods mentioned above do not solve the problem, then it would be best to contact the manufacturer of the computer.

  For more information, see the following Microsoft article and check if that helps.

  
  Why my screen is black when I start Windows 7? (Applies to Windows vista)

  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-screen-black-when-i-start-Windows-7

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article: back up the registry in Windows Vista

• Black screen after the attempt to upgrade to windows 10

  I was trying to upgrade windows 7 on a laptop HP Windows 10. The first attempt was via the white windows logo in the taskbar. This attempt was interrupted, probably accidentally turned off the button wifi trying to move the computer. The second time I tried to use windows ten upgraded Installer. I did the usual download and installed up to 99%. He remained on the installation of 99% during the night and the next morning without change. I turned off the computer and he made a series of updates before shutting down for good. When it starts again, it has a black screen but the cursor is there and movable. I tried in safe mode for the repair and restoration of the system, but it did not work. I tried to reset the BIOS to default, but does not. I try to leave the computer turned off for an extended period of time disconnected from the internet to see if that helps. The last attempt to start, windows 7 seems to start but then ends up on the black screen and I held down the power button to stop it. I'd rather upgrade to windows 10 if possible, but if cannot then if can go back to windows 7 will be enough. It worked great on Windows 7 before trying to upgrade, so there is no problems with the computer.

  Hi Chris,

  I'll be happy to help you with the problem you have with black screen.

  The problem may occur if the video drivers are not updated.

  What is the model of your HP computer?

  I suggest you follow the suggestions by Sharath Srinivasan replied on August 7, 2015, the link below:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_10-hardware/black-screen-after-upgrading-to-Windows-10/cf3b4559-67d8-40E0-9cf2-ebf4528e1e78

  Please reply with the results, we are happy to help you.

  Thank you.

• Black screen after the failure of the connection - win 10 win7 installation

  Hello

  SYSTEM ERROR
  Cause
  I tried to install win10 on a PC running win7. Installation stalled at 99% and I restarted.
  The problem
  Now he still run win7, but once connected, the screen is completely black except for cursor. Features such as the job-work list as it should and in safe mode, the screen is not black after login.

  PC INFORMATION
  The video card
  My video card is "Mobile Intel (R) 4 Series Express Chipset Family" (driver version: 8.15.10.2202) Driver date: 25/08/2010) and windows tells me that the video card (graphics - in my language) is updated to the latest version.
  The model
  ASUS Pro79I Series. With Windows 7 64 bit

  Mathias, cordially

  Denmark

  Hi Mathias,.

  According to the description of the issue you do not get black screen after login in safe mode. For example, there might be a chance that the display driver is either corrupted or need a update. Please, try the steps to uninstall graphics card in Device Manager, uninstall the drivers of device from the list of programs, and then download the latest drivers from the manufacturer's website.

  Step 1:

  Uninstall the device from Device Manager

  • Open the Device Manager
  • Expand the section of the graphics card .
  • Find the Display card Driver.
  • Graphics Driver right click and choose Uninstall.
  • Select the check box delete the driver for this device.
  • Restart the computer after the uninstall is complete.

  Step 2:

  Uninstall the drivers of device from the list of programs in the control panel

  • Click Start, select Control Panel
  • Now, click on programs and select programs and features.
  • Find the Display card Driver.
  • Display driver card click right and select Uninstall.
  • Restart the computer after the uninstall is complete.

  Step 3:

  Download and install the latest drivers for the graphics card from the Web site of the manufacturer (ASUS)

  Hope it would help. If the problem persists post returns with the required information, the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Kind regards

• Black screen after the Windows Logo

  I have a black screen after windows with no crusor logo and no keyboard work, I just tried all mentioned in the forum, but all of them are just useless happens just after I shutdown or standby or standby extended

  I use windows 7 ultimate 32 bit with the latest drivers & updates

  Hello

  What is the code of Bug_Check of BSOD?

  Check this thread for more information on using BlueScreenView, MyEventViewer and other methods of
  Troubleshoot the BlueScreens - top 3 answers.

  http://social.answers.Microsoft.com/forums/en-us/w7repair/thread/c675b7b8-795f-474d-a1c4-6b77b3fcd990

  Check the code from Bug_Check to Faultwire as shown in the above troubleshooting link.

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• black screen after the mode standby, windows 8

  I upgraded my laptop HP dv6 to windows 8. I get a black screen after I wake up from sleep mode. as if the monitor has no power.

  In fact, I solved the problem by upgrading my graphics card driver.

  but I was troubled because I thought that it was up-to-date.
  display the properties of the computer - device manager - adapters - NVIDIA GeForce GT 230 M
  I have a click right on NVIDIA GeForce GT 230 M, and then clicked on update driver software. He told me that the driver was updated.
  but I checked the nvidias site. There, I found a newer version.
  It was confusing. Why windows can't find this newer version?

• Why my iphone 6 more stuck with the apple logo and the black screen after the factory reset?

  I'm selling my iphone 6 Plus I did a factory reset, but it has stuck on a black screen with the white apple journal for more than an hour, why what is happening?

  Force the restart: press the lock and home buttons until the Apple logo appears again.

• Start the computer to a black screen after the improperly installed display driver

  original title: display driver

  I installed the wrong display driver and now black screen when the computer starts

  Hello

  Start mode safe mode with networking.

  Go to the website and get the correct - driver download but don't install it yet.

  Control Panel - device - graphics cards - right click on the adapter Manager - UNINSTALL-
  Check the box - DRIVER to REMOVE when complete reboot safe mode.

  Now, install the appropriate driver.

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Turning to black screen after the value time/RAM used FireFox

  Hello

  My question is for the graphics. It lasts for several months now and he came to a point where it starts eating away at me.

  I installed recently (within 6 months) 16 GB of RAM and a new extra GPU. I upgraded to an ATI Radeon HD 5750 to a Gigabyte Radeon R9 x 270. I never had this problem with my 5750 card, so that initially led me to believe it was a card problem, until I discovered that my problem seems to be ONLY with FireFox.

  Now to the question: arriving to 2.8 GB + of memory used (according to Task Manager), FireFox flashes for a brief moment and to scroll the screen or between tabs, becomes completely black, forcing me to re - load the browser. Now the first question of the use of FireFox, so initially, amount of RAM is crazy, and I tried to lower the settings by disabling extensions, all sorts of things and the fulfillment of the only thing that is extend the time before flash made his boring appearance.

  The screen flashes problem seems to be quite something else. I tried to upgrade to the latest version of FireFox, run a new installation of FireFox, update my graphic drivers their latest versions, just about everything I can think of, and nothing seems to fix. What seems to be the problem here? I would be very happy all feedback and better understand how I can solve this problem outside hard using a different web browser.

  Hardware specifications:
  Motherboard ASUS P6X58D
  Intel Core i7 930 @2. 8 GHz processor
  22 GB of total RAM (3 branches of 2 and 2 strips of 8)
  Gigabyte Radeon R9 270 x GPU
  Brand/model unknown 850W of power (honestly, I'm just too lazy to remove the top of my tower which is packed in a locked drawer to figure out the make and model at display time)

  Running FireFox in safe mode seems to have solved or at least slow the excessive RAM issue however FireFox has now terrible performance much earlier. Adding constantly freezes and scripts constantly crashing, it would seem that addons and extensions that I ran helped to solve these issues.

  What I do now is to reload firefox standard and turn my extensions one by one to see which seems to be the cause of most of the points in the use of the ram.

  AdBlock Plus seems to so far be keep stable FireFox without problem. Going to turn in my next toolbar. Will edit this post more information after having observed the behavior of FireFox.

  Edit: The reason to believe it's my toolbar like with AdBlock plus, FireFox was still around or less 1 GB to use physical RAM. After the reactivation of my toolbar, I jumped up to 2 GB. Contact the developer of the toolbar soon.