Black screen after the Windows Logo

I have a black screen after windows with no crusor logo and no keyboard work, I just tried all mentioned in the forum, but all of them are just useless happens just after I shutdown or standby or standby extended

I use windows 7 ultimate 32 bit with the latest drivers & updates

Hello

What is the code of Bug_Check of BSOD?

Check this thread for more information on using BlueScreenView, MyEventViewer and other methods of
Troubleshoot the BlueScreens - top 3 answers.

http://social.answers.Microsoft.com/forums/en-us/w7repair/thread/c675b7b8-795f-474d-a1c4-6b77b3fcd990

Check the code from Bug_Check to Faultwire as shown in the above troubleshooting link.

I hope this helps.

Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

Tags: Windows

Similar Questions

  • Windows startup at black screen after the Windows logo

    Original title: Evga Nvidia GeForce GT 520 1GB black screen graphics card

    I have a Hp Pavilion 6400 in the series which ran on Windows Vista (32 bit). I recently installed Windows 7 Ultimate (32 bit) and now the screen goes black once the windows logo closed its animation. I uninstalled the driver, re the driver installed and configured my system to the lowest resolution.

    Already found in the forums.
    -TV is too old to be compatible.
    EVGA - technician told me that the food was not powerful enough.
    -Forum Windows says: error in Explorer.exe.
    -Also found response that runs the computer through MSconfig would solve the problem.
    So far, none of these solutions have worked. Answers appreciated.

    Problem solved.

    It turns out, the driver for the video card would never completely install due to its mode of operation.
    Solution.
    1 restart Windows "low resolution".
    2. access to the form of previously downloaded files driver install the EVGA site while in safe mode.
    3. once divers have installed I changed the resolution in a HD rather than a framework
    "(native)" parameter in the resolution section.
    4. application of the Windows updates.
    5A started playing Star Trek Online.
    Thanks for your reply and have a great week.
  • Pavilion dm4 1041tx: black screen after the windows logo

    My laptop screen has frozen while watching a video then after restarting it displays black screen but I can connect to windows using the laptop and fingerprint reader can be closed by windows by pressing and then alt + f4, then alt + f4, then enter. Works in safe mode. Disable the ati graphics card did not work. Same execution of recovery did not work.
    Hard drive test results:
    Smart check: past
    DST short: PAST
    Long DST: PAST
    Help, please...

    Hi @vikash4309 ,

    At this point I agree with the tech that look at the computer I think it's a problem with the hard drive or even the system board. They may give falsely on the test results. I would recommend that you take it back to this HP's Service Center.

    If you do not replace the hard drive recovery CDs should work as long as replace you it with another hard drive and not an SSD because they are different and the recovery CD will know how to properly partition the drive.

  • black screen after the windows logo when I install my video card

    Leadtek WinFast GT 220 1024Mo DDR2 graphics card

    I compared the original image with my GT220 I bought, and me missing 1 capacitor... It's funny because it's probably the error of the factory. It only works with the drivers, if I install them it hundred boot windows7 (only win logo and black screen then)... And when I go to nvidia to scan my gpu it shows gt 330, HELP?

    I compared the original image with my GT220 I bought, and me missing 1 capacitor... It's funny because it's probably the error of the factory. It only works with the drivers, if I install them it hundred boot windows7 (only win logo and black screen then)... And when I go to nvidia to scan my gpu it shows gt 330, HELP?

    You say you have "defective" material and you want a software solution?

    Any material support - including the drivers and other software that may be necessary to enable a hardware component to operate fully in a given operating system - is the manufacturer of the equipment.  So if you have a problem with your nVidia GT220 video card - your first stop should be nVidia.

    -In addition, you are in the hands of nVidia.

  • Black screen after the Windows Logo screen

    All of a sudden just put off the computer. I keep trying to start it up, but just then it gets to a black screen and does nothing. I managed to get in Mode safe like twice, but when I try to access safe mode again, it gets stuck loading. What can I do to save my laptop OR at least save my data?

    Hello

    It will be interesting to know what model of laptop you have. I had the same problem and I connected the HARD drive to the second workbook as external HARD drive. on this way, I was able to copy all the important data.

  • Black screen after the windows login

    Hi, I have a HP Pavilion DV7 notebook with Windows 7 Home Premium installed on it. A problem I've noticed is that, once I connect to windows during a boot, the screen is black for about 1-2 minutes. After awhile, explorer.exe would with desktop, taskbar and icons. I am concerned about this 1 to 2 minutes of black screen after the boot as it did not exist previously. I know I have options such as restoring the computer laptop back to the default state, or by using the system restore. However, I don't want to lose all my stuff, and with respect to the restoration of the system, I'm not sure when the problem happening, as it was some time ago. I have read a Microsoft article, (http://windows.microsoft.com/en-US/windows7/why-is-my-screen-black-when-i-start-windows-7) and tried all the steps with the graphics card and the regestry, but nothing seems to work.

    -Task Manager is able to open when the screen is black (shows explorer.exe running)

    -J' have the drivers on the HP support site

    -laptop is HP Pavilion DV7 3024ca

    You will need to login using the method of trial and error. Please uncheck all of the MSCONFIG Startup tab and restart the system. If the black screen issue is resolved, then check out an application every time and restart the system. This will help you to identify the program interfere.

  • iPhone ran out of battery, now wont start black screen after the apple logo

    Hey not last night, but the night before, I forgot to plug my phone so it died while I was sleeping. When I woke up, I plugged and went a little. When I came back I noticed that the phones screen was on, but black. I tried to restart with the buttons and everything that I do not understand what could be wrong. The battery is not cause fried, it continues to display the apple logo then a black screen. I would prefer not to have my phone back and to lose everything, and I can't really afford to pay someone more than 200 to tell my my phone is broken, please help.

    Have you tried that?

    Try a forced reboot. No data is lost during this procedure. Hold on the sleep and home buttons at the same time for about 10 seconds until the Apple logo appears on the screen.

  • Startup problem on my Satellite - black screen after the Toshiba logo

    I have a satellite phone and I recently installed 3 programs and asked me to reboot. Upon restart, the Toshiba logo appears, and then the screen turns off, it does not load any further. Drive HARD is not running but is under tension. Thank you

    Hello

    And the programs that you have installed?

    You can start the machine in safe mode?

  • Black screen after the Microsoft logo.

    I have windows Vista and every time I go to start my computer I have to press F8 in in order to get to the login screen. What should I do?

    Hi Chris,

     
    1. did you of recent changes to the computer before the show?
    2. which option F8 you chose to connect?
    3. do you have external devices attached to the computer? If so, please, disconnect them and check.
     
    Please follow the methods to perform the Startup Repair:
     
    Method 1:
     
    Startup Repair: frequently asked questions
     
    Method 2:
     
    What to do if Windows does not start correctly
     
    Important: When running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.
     
    Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.
     
    Let us know the status of the issue once you've completed the steps above.
  • HP M9000: Black screen after the "Starting Windows" logo and the windows on the screen

    I just gave me a m9040n HP Pavilion Elite with a Q6600 CPU, graphics card ge force and two 500 GB HARD drives in.

    When I starts it up it seems to be ok the HP blue screen will lights up at the start of the BONE and displays "starting Windows" on the screen with the windows logo. and then it goes to black with just the cursor on the screen. (Vista) So I know WHAT BIOS is ok, the graphics are windows allowed from.

    I went to the HP system F11 recovery and he seems to think that all is well... Very confused ideas?

    Thank you, Glenn...

    400workstation

    It looks like one or more of the boot loader files has been corrupted.

    You need access to a PC for this phase of work in order to create the necessary support to fix your PC boot loader.

    You will need to create something called a CD-ROM of repair of Win7. This will repair the boot loader files, and if that is the problem, your PC will start OK after that.  Yes, it's for Win7, but Vista uses the same bootstrapper, so you can use Win7 to repair the Vista bootloader files.

    The file you need can be obtained (with supplement) from this link: http://neosmart.net/blog/2009/windows-7-system-repair-discs/

    When you download this file, it will be an ISO file.

    To make a CD bootable it, you will need to download and install ImgBurn: http://www.imgburn.com/

    Once you have installed, run, select the option "Save image to disk file" and select the downloaded ISO file and that it points to a blank CD.

    To make a USB bootable of it, you will need to download and install RUFUS: https://rufus.akeo.ie/

    Once you have that, it is executed in the input of the unit, use the drop down menu to select the USB stick.  Near the bottom right, where is written 'Create a bootdisk to aid', select the ISO file downloaded.
    -------------------------------------

    Boot from the media that you have created and follow the instructions in this link: http://www.sevenforums.com/tutorials/681-startup-repair.html

    You will probably need to run Startup Repair three times for him to fix all the boot loader.

    Once completed, your PC should start OK.

    If it isn't, then some files of the operating system has also been corrupted and the only way to fix it would be to perform a system recovery - which if F11 does not work, but a recovery from the PC to its original using recovery media state.

    Problem there is that HP no longer wears a recovery media for the Vista PC, so you should check to see if these sites still have it: http://www.computersurgeons.com/ and http://www.restoredisks.com/

    Good luck
    ========================================================================
    I'm a volunteer and I do not work for, or represent, HP.
    ---------------------------------------------------------------
    If my post helped you, please click on the Thumbs-Up symbol on my post to say thank you.
    If my posts resolved your issue please click "accept as a Solution.
    ========================================================================

  • G62 screen remains black after the windows logo

    Hello

    I have a HP G62-b05SD. I noticed that many people have the problem of simmular.

    I know what makes, but don't know how to fix it.

    So here it is.

    Sometimes when I boot / reboot system screen turns black after the windows logo, but if I wait a while, I do not hear the star tune up windows, but the screen remains black.

    I noticed that this happens when I shut down or restart the system with a usb port (be it a mouse or a stick is not serious)

    If I all out en usb port restart or turn on the machine for the first time this day here, everything starts well.

    So there must be some driver problems I think with usb ports and the screen or something.

    Help, please!

    HP G62-b05SD

    Windows 7 64-bit

    Intel i3

    ATI mobility radeon graphics card

    Ow and when I get the black screen, the hard reset does not always work.

    I also did a startup repair and it showed:

    "If you have recently attached a device to this computer as a camera or portable music player, remove it and restart your computer. If you continue to see this message bla... bla... bla... "

    I hope you can help.

    Hi Frosty1984,

    Thank you for visiting the Forums HP's Support and welcome. I read your thread on your HP G62 - b05SD Notebook and having problems with the starter. Here is a link to BIOS update.

    What is the USB device that is at the origin of the questions?

    Thank you.

  • Pavilion 15-243cl after automatic update of windows 8.1 I get a black screen after the home page.

    recently installed an automatic update of windows 8.1. Now, I get a black screen after the home page. I can load the Task Manager and access the internet. tried to go to the SafeMode to start with f8, but several attempts failed. I updated my graphics driver from AMD today and same black screen. I've also restored sytem to an earlier date using the HP utility with results screen - black even after the home page.

    Hello

    Try the following.

    Boot the computer normally and log.

    Black screen, old the ctrl and alt keys and press delete.

    Select Task Manager.

    Click on file and select the new task.

    Type rstrui - also enter a tick in the box for "create this task with administrative privileges" - and click on Ok.

    When the system restore interface is loaded, choose a restore point at least 48 hours before the opening of session question (IE before the last batch of Windows updates have been applied) occurred initially and then proceed to the system restore.

    Kind regards

    DP - K

  • Get an error message when turning on the computer, then just get a black screen after the message saying cannont find script file c:/windows/run.vbs

    Original title: windows does not

    I have windows 7 and get an error message when turning on the computer, then just get a black screen after the message say cannont find script file c:/windows/run.vbs

    What can I do?

    Enter your bios usually with keys F2 or delete to the first powered

    Use default Optimize can be the F5 key and save and exit,

    Insert your installation disc or flash media and press F8 or F12 to boot on it

    Then use the recovery tools to run the Startup Repair tool.

    http://Windows.Microsoft.com/en-us/Windows/Startup-Repair-FAQ#1TC=Windows-7

  • Inspiron 9300 screen turns off after the Windows Logo screen

    Inspiron 9300 my wife became severely infected.  I thought I had some weird things start popping up of the problem decided to wipe the hard drive and start over.  Unfortunately, I don't have to restore disks when I bought the computer.  I install windows xp pro service pack 2 full retail version.

    Installation was not a problem until I installed the driver ATI Mobility x 300.  I followed directions for installation from the website, do the installation of xp followed of the dell system software update followed of chipset followed video driver.  After that whenever I put on, the screen turns off after the Windows Logo.  The computer is still running and if I plug an external monitor everythng is fine.

    I tried all the troubleshooting tips I've seen in this forum.  I did a full install twice. made of safety boots (all right), started in VGA mode (works fine), I ran diagnostics from fn on startup, including express, extended and video tests and they pass all the controls.  I'm sure it's a software problem, but have been unable to solve.  I've updated the ATI bios although when I run it says already installed and done one installs x 300 driver on 6 ttimes own.

    I know it must be something simple that I'm missing. My system is the Inspiron 9300 with 2 GB of ram and the mobility x 300 card.  Any help would be appreciated.


  • I just ran the last update for my iPad and now it just continuously reboots to the black screen with the Apple Logo. Hard restarting does not help, neither do not connect the camera to MacBookPro. Any ideas?

    I just ran the last update for my iPad and now it just continuously reboots to the black screen with the Apple Logo. I left plugged in all night and still no change. Hard restarting does not help, neither do not connect the unit to aMacBookPro. When I do this, iTunes complains that it can not connect because the iPad 'expires '. Now it is disconnected, but I can't turn it off. Even close the lid will not extinguish it. Any ideas?

    Try the following. It seems yo may have to let the battery drain is completely:

    - iOS: do not respond or does not light

    -Also try DFU mode recovery mode post-test

    How to put iPod touch / iPhone in DFU "Karthik doodles."

    -If failed and that you cannot completely turn completely the iOS device, leave the battery to drain completely. After loading a hour repeat the foregoing.

    -Try a different cable

    -Try on another computer

    S ' there is still not successful that usually indicates a hardware problem and an appointment at an Apple store Genius Bar is in order.

    Shop Apple Store - Genius Bar

Maybe you are looking for

  • I can't upgrade my firefox 1.0 to 1.1

    I know that there is a new update for Firefox OS. I want to download it but when I try, it says that my system is already upgraded.I don't know what I can do!

  • Addition of drift in frequency of trapezoids

    I'm using Labview 8.0 and I want to add the derivative of a square wave to the instantaneous frequency of a sinusoid at the same point in time. I tried to use the VI point by point, but they do not seem to work. Does anyone have any suggestions?

  • ACER ICONIA W700

    I recently bought a W700 Iconia, and no matter what I do, I can't figure out how to get my internal microphone to work. I searched every possible site and video I could find, and have not been able to find a solution that works. I tried setting, Cont

  • Mapped DFS network file causes windows Explorer to hang

    Hello I have an environment running windows xp service Pack 3 and distributed file system (DFS) mapped network.The domain level is windows 2003 service pack 2 and server dfs are running in windows 2008 service pack 2. whenever a client machine connec

  • Application settings...

    Hi, guys! I stored the information of setting up my application using PersistentStore and initialized with the default values during the installation. If the application is updated, it has the old settings. But I want to initialize the parameter with