Black screen after TV jump back and no tuners after S3 Sleep

Similar Questions

• G4 black screen after RESUME sleep book Pavilion

  Gud morning,

  IM using Pavilion g4-2007tx and my graphics card is AMD Radeon HD 7670 M (2 GB memory DDR3 dedicated) and graphics driver version is 8.933.3.3000. last 2 weeks, I went to the site to download driver hp to see if if there any update driver my laptop en... And yes I have gt a updated driver for my graphics card and the driver version is 8.933.3.4000 and this link http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-111285-1&cc=my&dlc=en&lc=en... After I download and update, it successfully but when I put in mode 'sleep' and when I on my laptop, the screen is all black when I install the driver previos version is not the problem of sleep... I hope that technician Hp would have a solution for me... Thank you

  Michael,

  After the update, go to power and all set options by default.

  The update can change a parameter with power options.

  Do a hard reset.
  Turn off the computer.
  Remove the power cable and battery.
  Hold down the power button for 15 sec while booth energy sources are deleted.

  This should reset the hardware in the computer.

  That you put it on press the F10 key. This will load the BIOS setup utility.
  Press F9 to load the default values.
  Press F10 to save and exit.

  When the computer starts up, check if everything is working.

  I would like to know how everything goes.

• HP G60 laptop: black screen after sleep or hibernate Windows10

  Since upgrading from Windows 7 to Windows 10, the laptop displays a black screen after the sleep or hibernate modes.  The system seems to be commissioning (HDD, fan action), but no video.  The system boots normally cold trouble-free starting.  Never, there is this problem with Windows 7.

  Hi @Bobby876,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your HP G60 laptop and problems with the mode "sleep" after the update to Windows 10. I recommend to restore the default BIOS settings. You could restore the BIOS with this document by selecting the reload the default BIOS settings. In this way, it will look at the hardware installed on your laptop.

  You can try:

  In Device Manager, click the arrow

  next to display adapters to expand this category
  Right-click on the graph, and then select Update driver software if more than 1 graphic adapter do 1 at a time.
  Select search automatically for updated driver software.

  The laptop must find and automatically install the updated driver
  Once the installation is complete, restart your laptop.

  You can try to use the Windows Update Troubleshooter to fix updates that do not come through Windows 10.  Please restart the laptop twice to make sure that all updates are completed!

  Please let me know how it goes.

  Thank you.

• Corrupt BIOS V5 531 Acer black screen after startup, f2 and f12 also. Repairable?

  Hello

  Yesterday I tried to install Win 7 if I could play D & D Neverwinter on Arc after using * nix systems study (looking to start a career as an administrator). I had plugged into a power strip that was, unbeknownst to me, turned off and I went to make coffee and watch some news. When I came back to check the progress of my laptop was powered off and since then I havn't been avle start without being blocked at a black screen after the start page of the bios. The f2 and f12 also leads to a black screen, I can not change the boot device or enter the bios Setup.

  Is - fixable at all? For example, is the a key-combo, I can use it to restore from a backup bios? Or, do I have to bring in a technician who can install a new chip bios or flash this old some how? Or did I brick pemanently my device?

  V1.22 is what you want to be part of a unit of Windows 7.

  The problem is if it crashed during the upgrade process, it will take some special tools clearly on the chip on the MB and recharge it with a new BIOS. I would contact your local support team to see what options are available.

• At the end of the factory restore, but black screen after "Windows has set up the computer.

  The model in question is VC863AA #UUW

  I want to get back the computer to the factory condition, so I rebooted and you press F11. Everything went exactly like this: http://support.hp.com/us-en/document/c00814731#N72 (chapter "Start a restore from the hard drive and the computer is off")...

  .. until step 10, which States:

  "The computer restarts and continues in the installation of Windows. Complete the configuration screens and wait until the computer finishes the installation program. "Then turn off the computer, reconnect all devices and turn on the computer.

  Yes, the computer restarts. She continues in the Windows installation (it says "medan windows konfigurerar datorn Vanta", which means roughly "Please wait while Windows configures the computer"). After that which was for about 5-10 minutes, the text disappears and the computer restarts by itself.

  After that, he gives a normal load Windows Vista bar and after that black screen. It seems to be a little bit alive but jammed somehow. If I let it be for several hours, he goes to the standby mode. If I wake up, he still won't. I can plug a USB another keyboard and he will make some access to hard drive (load a driver probably). I can press the sleep button and it will go into sleep mode. But if I press the power button / stop briefly, it will NOT stop.

  So finally, after several hours I forced to shut down (by pressing the power button / stop longer). When I start it, it goes back to behave as explained in the previous paragraph.

  If I press F8 during startup and select Safe mode, it goes in safe mode and I get dialogue indicating in Finnish:

  «Asenna Windows: Windows ei voi suorittaa vikasietotilassa asennusta.» See devam fenetresdans asennusta uudelleen tietokoneen kaynnistamalla. »

  Rough translation:

  "Installation of Windows: Windows cannot complete installation in safe mode." "You can continue the installation by restarting the computer.

  If I restart the computer, it goes back to the black screen after the windows loading bar.

  This suggests that there is something in the installation of Windows who jams it.

  I can install Windows Vista from a Vista DVD, but then I can't use the software included with the computer. (App States installation cannot install on a machine that is unauthorized, then of course they are looking for some OEM HP things.)

  Any suggestions on how to fix jam that continues with installing Recovery Windows or how to install the software on a normal Vista would be very appreciated.

  I solved the problem. Good thing I didn't order the restore disks, because that would not have solved the problem.

  I decided to post it because I don't know there will be others who have HP Pavilion Elite m9754sc and will have to face this problem of a black screen after the restoration.

  The fact is that the restore worked perfectly, but in this display card driver is buggy and it causes the screen to go black.

  I thought that what I installed fresh Vista which worked until I installed the driver from the recovery partition display. I tried VGA, outputs HDMI and DVI on the factory installed GeForce GT220 and none worked.

  A defective display driver should normally be no problem we could go in safe mode and fix it to the it. But as with the recovery goes to pre install state (ask what language to use etc.), safe mode does not work.

  So the solution is to unlock the display of the motherboard connectors and remove the factory installed GeForce GT220. Once the recovery and installation of Windows is finished using the graphics card integrated motherboards, you can reconnect the GeForce GT220 and get a updated driver with safe mode.

• Aspire R7 572 G having a black screen after windows update 8.1. What should I do

  Hi all

  IM wondering, anyone having this problem before, Im of the problems with this black screen after startup, it happened yesterday I think microsoft needs to have updated some drivers rendering my black screen after startup. Initially, I thought it was my SSD, but it turns out that I can't get into Safe Mode.

  I read more info on this problem related to the other PC and try the preferred method of 'disabling' drivers Intel GMA HD. It worked, however, this means that the main driver is now reduced to a graphics card video standard with vram limited.

  I tried to roll back and even redownloading and reinstalling the intel driver in version VGA_Intel_9.18.10.3215. The blackscreen after boot have yet taken place. I missed something?

  This is an old version of Intel drivers.

  Try this, after uninstalling the old pilot Intel:

  http://global-download.Acer.com/GDFiles/driver/VGA/VGA_Intel_10.18.10.3316_W81x64_A.zip?acerid=63519...

• HP Pavilion PC p2: black screen after log in

  Hello

  My screen on my desktop turns black after login.  I can still see the cursor.  I hit ctrl alt del, went to Task Manager typed in rstrui to do a system restore.  I went back a few months of restoration, but it did not work.

  The weird thing is sometimes I wait about 30-45 min disappears from the black screen.  But then reboot, I have to start the same thing.

  Any ideas or help would be very appreciated.

  Ryan

  Hi Ryan,

  Check the following points.

  Boot the computer normally and log.

  Black screen, hold down the ctrl and alt keys and press DELETE.

  Select Task Manager.

  At the bottom left, select "show processes from all users".

  Click the name column header to organize processes in alphabetical order.

  Look for an entry called to run once Wrapper (RunOnce.exe) - If you see it listed, right-click on it and select end task.

  If your office now appears, download AdwCleaner on the following link (there are 4-5 second delay until it's available)-in your downloads folder.

  https://toolslib.NET/downloads/finish/1/

  A once downloaded, close all programs, open your download folder and double-click the application to run it (click Yes to any uac prompt).

  Click the scan button.

  When the results are displayed, click the Clean button - when you are prompted to restart, click Ok.

  It starts on the desktop correctly now?

  Kind regards

  DP - K

• Black screen after the windows login

  Hi, I have a HP Pavilion DV7 notebook with Windows 7 Home Premium installed on it. A problem I've noticed is that, once I connect to windows during a boot, the screen is black for about 1-2 minutes. After awhile, explorer.exe would with desktop, taskbar and icons. I am concerned about this 1 to 2 minutes of black screen after the boot as it did not exist previously. I know I have options such as restoring the computer laptop back to the default state, or by using the system restore. However, I don't want to lose all my stuff, and with respect to the restoration of the system, I'm not sure when the problem happening, as it was some time ago. I have read a Microsoft article, (http://windows.microsoft.com/en-US/windows7/why-is-my-screen-black-when-i-start-windows-7) and tried all the steps with the graphics card and the regestry, but nothing seems to work.

  -Task Manager is able to open when the screen is black (shows explorer.exe running)

  -J' have the drivers on the HP support site

  -laptop is HP Pavilion DV7 3024ca

  You will need to login using the method of trial and error. Please uncheck all of the MSCONFIG Startup tab and restart the system. If the black screen issue is resolved, then check out an application every time and restart the system. This will help you to identify the program interfere.

• Black screen after the attempt to upgrade to windows 10

  I was trying to upgrade windows 7 on a laptop HP Windows 10. The first attempt was via the white windows logo in the taskbar. This attempt was interrupted, probably accidentally turned off the button wifi trying to move the computer. The second time I tried to use windows ten upgraded Installer. I did the usual download and installed up to 99%. He remained on the installation of 99% during the night and the next morning without change. I turned off the computer and he made a series of updates before shutting down for good. When it starts again, it has a black screen but the cursor is there and movable. I tried in safe mode for the repair and restoration of the system, but it did not work. I tried to reset the BIOS to default, but does not. I try to leave the computer turned off for an extended period of time disconnected from the internet to see if that helps. The last attempt to start, windows 7 seems to start but then ends up on the black screen and I held down the power button to stop it. I'd rather upgrade to windows 10 if possible, but if cannot then if can go back to windows 7 will be enough. It worked great on Windows 7 before trying to upgrade, so there is no problems with the computer.

  Hi Chris,

  I'll be happy to help you with the problem you have with black screen.

  The problem may occur if the video drivers are not updated.

  What is the model of your HP computer?

  I suggest you follow the suggestions by Sharath Srinivasan replied on August 7, 2015, the link below:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_10-hardware/black-screen-after-upgrading-to-Windows-10/cf3b4559-67d8-40E0-9cf2-ebf4528e1e78

  Please reply with the results, we are happy to help you.

  Thank you.

• Black screen after upgrading to Windows 10

  I upgraded from win 8 to win 8.1 and charge upward to my connection. Once I connect the stage is empty with no office or whatever it is. My only access was with the Task Manager and from there I was able to get to the control panel but I can't restore to previous Winows. I was able to get online and I tried to switch to the window 10 and it loaded but unfortunately do not have a product code to win 8. And I don't have a product code to win 10 or win 8.1.

  can help me, thanks

  Bill

  Hello

  I realize the inconvenience that you are having with your PC, as the screen goes black after you log in. I will certainly help you to question.

  I suggest you refer to the suggestion of Sharath Srinivasa on August 7^th, 2015:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_10-hardware/black-screen-after-upgrading-to-Windows-10/cf3b4559-67d8-40E0-9cf2-ebf4528e1e78

  Hope this information helps.

  Please get back to us with an update on the issue, we will be happy to help you.

• Black screen after the notation in Windows 8

  Title screen: black original after logon (windows 8)

  I have lock my Dell M4400 (windows + L) and close the cover, after leaving for about 5 minutes. And to come back and connect on my laptop that my office shows about 1 min, then my screen turns black.

  It happens every time, I lengthen windows, my display drivers but nothing helped.
  This started happening about 3 days ago, so I went back in time for a week, but it's always the same.
  Someone has an idea to solve this problem?
  Edit: now it does to wake from its slumber, the clean is when I cut the power or the hardshutdown. The screen remains black even after a couple of try tot restart the laptop. Im getting Desperate now.

  I tried to make the window & window + R, C. They simply do not work. The only thing I can do a window + L & Ctrl + Alt + Delete. I opened my computer by using the Windows Task Manager. With my computer, I opened Google Chrome and I'm typing this now with a black screen Google Chrome, Windows Explorer and Windows Task Manager.

  Task Manager, go to file > new task.

  RSTRUI put in and this should start the system restore.

  Choose a restore point a few days before this problem if it is available and you should be good to go.

• Black screen after the Bootcamp

  I just installed a Windows 10 drive to my mac pro end 2012 book. I had some problems when the bootcamp says "cannot copy files of windows (or something like that). However, finally I managed to resolve each of them, the windows of the files have been successfully copoed, and after that I chose to give my windows system 230 G and 270 G for my macbook pro.

  I clicked the button installed, waited a few seconds and the laptop computer just restarted (or close) by itself. It is automatically activated a white screen (which happens all the time when I turn it on). He stayed like that RPF about 5 minutes, and then it turned out to be just black. I mean by dark black, because I can still see a bit of light coming out of the screen. After that, nothing has changed.

  I have my USB connected since all this time and my energy plug. In my view, it is connected to the wifi too, but my mac remained black screen at least an hour and a half so far.

  Is this normal? I watched a youtube video, and he says that he will take a few minutes for the windows logo appears, which is certainly not the case. Im very worried right now: well I reboot by pressing the power button? Should I continue to wait? It's really frustrated. And please ignore the grammar errors that I may have made.

  Please leave a comment if you know what the problem is or if you know how to solve this problem, much appreciated! < 3

  Welcome to Apple Support communities

  The only thing you can do at this stage is to shut down your Mac. Then, after having turned it on again, hold down the ALT key until you see all available for your MacBook bootable disks, so you should see an option with a drive labeled as "Windows" USB icon Choose and let Windows install load, so you no longer have to follow the steps. Do not forget to keep the USB with Windows install is plugged.

  If you don't see the USB as a bootable disk, and then the Windows Installer may be damaged or your MacBook Pro does not support a USB drive installation.

• Pavilion 15 - p065tx: Pavilion 15 - p065tx, black screen after BIOS update recommended by HP assistant

  System reboot with black screen after accepting the update of the BIOS recommended by HP assistant this morning. AC power on at least three hours of waiting after the process completed successfully with auto update reboots always.

  Power light is on. Wired broadband light is turned on. Light CAP LOCK keyboard and led speaker hold noway.

  Hard reset has been tried 3 times with no improvement.

  External monitor is connected but no signal has been out of the laptop, screen is black.

  Done a few times this page to reset the BIOS setting blindly:

  http://support.HP.com/us-en/document/c02217843

  BEEPS heard when you press F10 or F5 during procedures. But still black screen.

  What can I try again?  Please advice kindly!

  Hi @ sokw,

  I have read and reviewed the post. Thanks for your reply. It seems that bios is damaged, and that is why the computer does not start. As it cannot be fixed by any software troubleshooting, you will need to contact the HP support by phone for the machine.

  HP technical support are available by clicking on the following link:
  
  http://h22207.www2.HP.com/us-en/?openCLC=true
  
  (1) once the page opens, please select the country in which you are located. Then enter your model of HP on the right number.
  
  (2) then choose "Contact the Support" tab at the top and scroll to the bottom of the page "HP Support - contact" to fill out the form with your details.
  
  (3) Once finished, click the "Show Options" at the bottom right.
  
  (4) Finally, scroll to the bottom of the page and select "Get a phone number." A file number and telephone number will now fill for you.

  I hope this helps. I would like to know how this happens. I really hope that the problem is solved without hassle and the unit works very well. Believe me, I've done everything I can to help by keeping your interests in mind. Please reach out for questions and I'll be there for you help.

  Just to say thank youPlease click the ' Thumbs Up 'button to give a Kudos to appreciate my efforts to help me. If it helps, Please mark this "accepted Solution" because it will help many other people with the same problem to get it resolved without hassle.

  Now carefully and have a wonderful week ahead.

• Persistent black screen after startup on Satellite Pro A210 (PSAFHE)

  Need help, need advice on how to solve a persistant problem with black screen after put into initial service.

  Initially its fine but after the initial Toshiba of the screen just goes black, and the rest in this way, the PC stays on. Have you tried F8 options but all result in the same.

  Help please.

  Hello

  You can access the BIOS by pressing F2?
  Boot from a boot as Recovery DVD disk?

  If both is not possible, I'm afraid you have a serious hardware problem m.
  In this case, I get just speculate on the affected parts. Maybe his problem GPU or motherboard who knows

• Black screen after flashing to latest BIOS

  Nothing but black screen after flashing the latest bios (fan, leds work)...

  I can do, or that of new bios/motherboard can help? (I tried to rest the battery, press F8...) Thanks in advance

  I presume that the BIOS is doomed. What you need is a professional help with this then contact the nearest service provider and ask for help.

  By the way: check this forum using the advanced search option. In the past, I have seen several interesting discussions on BIOS recovery. I m quite skeptical on this subject but maybe you will be lucky and find the solution.