Black screen after upgrading to Windows 10

Similar Questions

• AoC crashes on black screen after upgrading to Windows 7

  My upgrade to Vista (64 bit) to Windows 7 appears smooth, with all works well. When I tried Age of Conan mmo for the first time, he loaded the game, but within seconds, the screen started flickering black/game/Office a few times alternately between the three with in game its operation across all three screens. After 30 seconds, the screen freezes on the game screen, or freezes on the black screen or briefly blue screens (no time to read the error message) and the computer restarts.

  I have updated drivers for my card (Nvidia 8800GT) video with Windows 7 compatible drivers, and the problem persists.

  The game went well on before Vista upgrade.

  Help!

  Thank you

  Windows Update has nothing to do with the upgrade of Windows. Posting here instead: http://social.answers.microsoft.com/Forums/en-US/w7programs/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Mac mini black screen after upgrading to sierra

  Hello!

  My probleme:Mac Mini end 2014 black screen to start immediately after the upgrade of Sierra.

  Thanks for your help.

  Kentr0n

  Is there anything on the black screen (boot) at all ever?

• Qosmio F60 - 11 c - black screen after update of Windows 7 Directx11

  Hello
  Two days ago I've updated Directx version because I want to try call of Duty Black Ops on my laptop. I've updated normally and it works perfectly but after a day at the restart of Windows7, after Windows 7 logo, I have a black screen and cpu fan running at full speed. So I used Toshiba Recovery Center and I got my pc to make settings. When it installs the drivers crashing into the graphics driver again. After that, I installed Windows 7, but I am using my computer on the resolution of 640 x 480 with 8 colors... And I can use the security with network mode but if I install the driver for GT - 330M and restart the computer, it hangs on after restarting windows 7.
  I tried to change the options in the bios, but it's always the same problem.

  * My :* graphics card Nvidia GT330M
  * :* Bios version 2.50 / EC2.40 (last update on the Web from Toshiba site)
  * Nvidia Driver :* 260.64

  I downloaded 197.16, 197.71, 258.80 drivers Nvidia and laptopvideo2go, but when I try to install these versions, it does not compotible with my control panel.

  IM totally crushed now and I do not want my laptop to Toshiba Technical Service which is in Turkey. For an easy fix, they spent 30 days...

  You have an idea?

  Thanks in advance
  Macaws.

  Post edited by: araskalyoncu

  > I used Toshiba Recovery Center and I got my pc to make settings
  What happens then?
  Problems after installing the operating system recovery disc?

  > When it installs drivers crashing into the graphics driver
  You n t need to install all the drivers after installing the recovery disc. The recovery disk installs OS Win and also drivers needed!

  > I downloaded 197.16, 197.71, 258.80 drivers Nvidia and laptopvideo2go, but when I try to install these versions, it does not compotible with my control panel.

  If you want to install non-Toshiba drivers, you will have to do it in the Device Manager.
  You must use the Advanced installation procedure and have point to the driver files (ini files) that you have downloaded and stored on the HARD drive.
  You have simply force windows to select this driver.

• Black screen after updates of Windows 8.1 - No. Cursor (Lenovo 50-75) - and gets hot

  Dear Forum,

  I have a new Lenovo Z50-75 with FreeDOS: I made a Windows 8.1 installation, and everything went well.

  After installing the approximately 70 updates - at one point it restarts and I get a black screen, just after few see the Lenovo Logo (enter the BIOS works).

  It is not all Windows start - I can't get fashion so safe, and I don't get any cursor.

  The behavior is reproducible, 2 times. Also when it crashes at the black screen, the van get reall busy, Levy and the laptop gets hot.

  Anyone working on this issue, or has any idea what should I do?

  Thank you

  Robert

  Updating the BIOS is not always my first option (risk, performance vs).

  Anyway... It works, everything is good.

• the 5s iPhone camera is still stuck in black screen after upgrading to iOS 9.2 still frozen just like with iOS 9.1

  I updated my iphone to iOS 9.1 5s, but the camera does not work, most of the time that it was stuck on the black screen. I read in a forum as there are a lot of users affected by the present. "Waited for the iOS 9.2, hoping that it will fix the bug. Finally iOS 9.2 has been launched. Happy to download it thinking that it is the answer to the question of the camera. For a while camera works perfectly, but after 2 days, it was stuck at the black screen forever. It worsen the problem of camera. Hoping someone can help me to fix my phone's camera. Thank you in advance.

  Try resetting your device. This will not erase your data stored on that device.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Alternatively, you can go to settings - general - reset - Reset all settings

  If that doesn't work, restore your device to factory settings. Please note that this will delete the data on your device.

  Take a look this Apple Support article: use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

  As a final step, try recovery mode. Turn off your unit, then plug it to your computer with the hold home button. Hold down Home button until you see the logo of iTunes on the screen of your device. After that on your computer, you should see the iTunes window saying that your device needs to be restored to factory settings. Click Restore.

  More info here:

  https://support.Apple.com/en-us/HT201263

  If these steps do not work, contact Apple and ask for help.

  https://www.Apple.com/support/iPhone/contact/

• HP Pavilion 17 Laptop: Unable to get the second screen after upgrade to Windows 10

  Hello

  I upgraded Windows 8.1 to Windows 10 yesterday.

  Up to now the double screen/second screen was working fine after upgrade my projector not able to identify my laptop.

  When I select the Windows key + P I get the message error "your PC can't project to another screen. Try to reinstall the driver or by selecting the different video card"

  On my device-> graphics cards Manager, I see only Microsoft Basic graphics card.

  Can someone help what driver should I install? Also ask you to provide the link for the driver to download the same.

  Thank you best regards &,.

  Umesh

  Here are the technical details:

  http://WWW8.HP.com/h20195/v2/getpdf.aspx/c04511132.PDF

  It is HD4400 Intel graphics

  Try the Intel driver update utility:

  https://Downloadcenter.Intel.com/download/24345/Intel-driver-update-utility

  Download drivers HP pages not available right now.

• Black screen after update yesterday Windows 7

  This morning I got a black screen with cursor error.  Was able to get into task manager, started in safe mode, Startup Repair did not work.  Went to system restore and restored to the 8/14 update, computer restarted normally.

  So the problem seems to be related to last update (19/08/10).  Now, of course I am offered this update again!  Any info on this problem?  I'm on a Dell Inspiron 546 desktop running 64-bit Windows 7 Home Premium.  Thanks for any help...

  Thanks for your reply.  After the system restore, I installed all the news updates and system rebooted normally.  Who knows why?

• Black screen after upgrade to Vista

  original title: I have the black screen of death since the update of Vista

  Please advise on how to fix?

  Hello bh_651,

  Looks like you dΘmarrez to a black screen.

  We will try to start in safe mode:

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  If we can start safe mode, then we can try to start mode minimum troubleshooting:

  http://support.Microsoft.com/kb/929135

  Let us know the result and we will proceed accordingly.

  Best regards

  Matthew_Ha

• HP all-in - One PC 19-2113w 19: white/black screen after upgrading RAM

  Hello

  So I have upgraded RAM using 2 x 4 GB SODIMM DDR3 Corsair 1600 Mhz, after installing the PC boots but screen is white/black

  steps to follow:

  1. I tried with 1 socket by using only a RAM, screen black

  2. I tried with 2 socket using RAM only one with the same RAM step 1, screen black

  3. I tried step 1 and 2 using the other RAM, screen black

  now here it gets interesting

  4 tried 1 socket using Original/factory RAM, screen black

  5 tried 2 socket using Original/factory RAM, screen black

  6. tried without any RAM at all, looks like a lack of RAM, screen black

  Now, to each measure adopted, I must say that the screen sound not only not showing things, but its totally black as it does at all, until the system starts normally. !

  Is it Possible the upgrade of RAM affect the screen? or maybe when I was replacing the RAM I hit some conecting by cable to screen or something?

  HP 19 all-in-ONE PC

  Product No.G4B06AA #ABA

  Model n ° 19-2113w

  10 64-bit Windows

  Update

  Removed the battery and hold the power for 30 sec button (BIOS reset if I'm not mistaken?) now it works with the orginal of RAM so I guess my new RAM that's the problem!

• Satellite C660 - black screen after upgrade memory

  Can Hi anyone please help

  try to upgrade the ram on my C660 account currently 3GB - talk to Toshiba and they told me the type to get and said im running 64-bit windows, I could go up to 8 GB - then bought the following

  DDR3 1066 MHz sodimm - x 2@4GB---de MyMemory.com (£64)

  When I mounted it and turned on the screen is all black.
  Anyone has any ideas please im in the middle of my assignments aaaaaahhhhhhhh!

  And any help would be really appreciated

  John

  Hello

  Looks like not compatible or faulty module.
  You can start the laptop properly using the old modules?
  If Yes, then the new memory should be replaced by another.

  I recommend modules Kingston I think they make good quality

• HP M9000: Black screen after the "Starting Windows" logo and the windows on the screen

  I just gave me a m9040n HP Pavilion Elite with a Q6600 CPU, graphics card ge force and two 500 GB HARD drives in.

  When I starts it up it seems to be ok the HP blue screen will lights up at the start of the BONE and displays "starting Windows" on the screen with the windows logo. and then it goes to black with just the cursor on the screen. (Vista) So I know WHAT BIOS is ok, the graphics are windows allowed from.

  I went to the HP system F11 recovery and he seems to think that all is well... Very confused ideas?

  Thank you, Glenn...

  400workstation

  It looks like one or more of the boot loader files has been corrupted.

  You need access to a PC for this phase of work in order to create the necessary support to fix your PC boot loader.
  
  You will need to create something called a CD-ROM of repair of Win7. This will repair the boot loader files, and if that is the problem, your PC will start OK after that.  Yes, it's for Win7, but Vista uses the same bootstrapper, so you can use Win7 to repair the Vista bootloader files.
  
  The file you need can be obtained (with supplement) from this link: http://neosmart.net/blog/2009/windows-7-system-repair-discs/
  
  When you download this file, it will be an ISO file.
  
  To make a CD bootable it, you will need to download and install ImgBurn: http://www.imgburn.com/
  
  Once you have installed, run, select the option "Save image to disk file" and select the downloaded ISO file and that it points to a blank CD.
  
  To make a USB bootable of it, you will need to download and install RUFUS: https://rufus.akeo.ie/
  
  Once you have that, it is executed in the input of the unit, use the drop down menu to select the USB stick.  Near the bottom right, where is written 'Create a bootdisk to aid', select the ISO file downloaded.
  -------------------------------------
  
  Boot from the media that you have created and follow the instructions in this link: http://www.sevenforums.com/tutorials/681-startup-repair.html
  
  You will probably need to run Startup Repair three times for him to fix all the boot loader.
  
  Once completed, your PC should start OK.

  If it isn't, then some files of the operating system has also been corrupted and the only way to fix it would be to perform a system recovery - which if F11 does not work, but a recovery from the PC to its original using recovery media state.

  Problem there is that HP no longer wears a recovery media for the Vista PC, so you should check to see if these sites still have it: http://www.computersurgeons.com/ and http://www.restoredisks.com/

  Good luck
  ========================================================================
  I'm a volunteer and I do not work for, or represent, HP.
  ---------------------------------------------------------------
  If my post helped you, please click on the Thumbs-Up symbol on my post to say thank you.
  If my posts resolved your issue please click "accept as a Solution.
  ========================================================================

• Satellite L675D: Blue error screen after upgrading to Windows 8

  Hello

  I recently updated my laptop to Windows 8 Toshiba and whenever I use it, after 5-10 minutes, I get a page of the Blue error screen and restart the laptop.

  The problem is really annoying.

  I discovered that if I plug the battery charger, the phone works normally, but I want to solve the problem correctly.

  What should I do?

  I m wondering about your model of laptop. What cell phone do you have exactly?

  Regarding your question:
  I would like to get this right, with the battery it works ok, but when the AC adapter is plugged, it crashes?

  What happens when you connect the front adapter from the laptop would be turned on?

  How have you installed the Windows 8? Move the laptop Win 7 to Win 8 or have you installed Windows 8 clean system?
  Are installed all the drivers Toshiba Windows 8?

  Another idea:
  Go to Windows 8 Device Manager and uninstall the device called compatible ACPI control method battery
  Restart the machine and check how it works.

• (hp envy 13-j000na 2 x) does not auto-rotation of the screen after upgrade to windows 10

  I can put in power 'Rotation lock' and "tablet mode" in the center of the action, but this does not help.

  I have noticed that after the last MS updated (KB3093266), auto-rotation started working even after a restart of the tablet. In Device Manager, the device driver Simple guidance is installed. For the moment, I think my problem is solved.

• Qosmio X 870-13 L - black screen after upgrading Ram

  Hello

  This is the 2nd time that I buy ram to upgrade my PC and it does not work. My PC has 2 theses ram already installed when I bought, and they are 4 GB each:

  "PC-12800 DDR3 800 MHz 11-11-11-28 M471B5273CHO-CKO samsun.

  I did some research before buying ram and saw that I had to buy the same frequency, CL and tension.
  So I bought this RAM which has the same exact settings as those already installed, but as soon as I insert it, I get a blackscreen on startup, can't even get to the BIOS. :

  http://www.Corsair.com/en-AU/Corsair-Memory-8gb-DDR3L-SODIMM-memory-cmso8gx3m1c1600c11

  Then I returned and bought theses two instead because people told me that the ram could be defective or my motherboard doesn't like two channels + 1 single channel:

  http://www.Corsair.com/en-us/Corsair-Memory-8gb-2-x-4GB-DDR3-SODIMM-memory-cmso8gx3m2a1600c11

  but here again, I have a blackscreen when they are inserted, I tried to put both or only 1 in the 2 available slots, but no matter what I do it does not work, the computer works fine when I remove the ram I bought.

  I even flashed my BIOS, but it did not help.

  So what I would get is a link to a 8 GB ram kit that will work for sure because I've already lost 15 with delivery.

  Thank you

  The problem is related to new RAM modules.

  I assume that there is only one real solution: you must replace the modules and must use compatible parts.

  The Corsair DDR3L module seems to support the 1.35v (test voltage).

  As far as I know Toshiba recommends the module PA5037U-1M8G (8 GB 1600 Mhz PC3-12800) who favour the voltage 1.5V.

  So I guess you need to use the support 1.5V modules