black screen appears during import file have?

black screen during file import have

Disable the GPU acceleration in preferences.

Mylenium

Tags: Illustrator

Similar Questions

  • black screen appears in windows movie maker

    My windows Movie Maker allows to work properly, I have windows vista, but this last year, when creating and previewing my film but nothing black screen appear instead of my movie... Don't know what happened. Even if idon't preview I will burn the dvd and then play on my dvd player and I still get the image black all through the film I've done. I tried to change all the filters in any way diff but no luck. I can't get any help from anyone. Help!

    Maybe... I want to say just maybe you would have a
    best result with and older version of Movie Maker.

    No guarantee but the next for an installable download
    version of Vista Movie Maker 6 may be worth a try

    * Proceed at your own risk *.

    (FWIW... it's always a good idea to create a system)
    Restore point before installing software or updates)

    Windows Movie Maker Installer for Windows 7
    http://noeld.com/programs.asp?cat=video#wmminst

    Also, Movie Maker 2.6 will work on Windows 7:

    Windows Movie Maker 2.6
    http://www.Microsoft.com/download/en/details.aspx?displaylang=en&id=34
    (this is similar to the version of Win XP Movie Maker 2.1)

  • Black screen appears whenever I start the laptop.

    Last week whenever I start up my Dell laptop computer, a black screen appears. I asked someone who knew with PC and he thought that it a defective power adapter. I tried to use it on just battery, no luck. At out the battery and the adapter just tried, without success. Adapter again sold, but I will assume that the adapter is not the issue.

    Sometimes it lights for a few seconds, but the black screen appears quickly before you can do something like get online.

    I held a flashlight the monitor and the screen is almost pure... If you look closely enough. Windows has loaded and you can see the wallpaper.

    Does anyone has any idea what caused this and how to fix it. The laptop has been barely used... perhaps 6 months at the most.

    Not sure if related but all updates are underway, antirvirus installed and running whenever the PC starts. Malware program executes and returns its own.

    Any help would be greatly appreciated, especially if it's something I can fix myself.

    Thank you

    Could be that the backlight of the lcd screen has failed. LCDs are sandwiches, with layer lcd sitting in front of a layer of back light. As you can see the Windows desktop without distinction when you look closely, the lcd layer seems to work like the graphics of the pc. Is the pc still under warranty - if so, take it back to the supplier.

  • Hi can someone help me... I try to open my photos of microscope and all of them are just empty black screen while the merged file shows the image. I can't change grayscale in RGB color space (like my single images the info on them is

    Hi can someone help me... I try to open my microscope fluorescnece images and they are all just empty black screen while the merged file shows the image. I can't change grayscale in RGB color space (like my single images the info on them is gray and the merged image color space is RGB)

    Try to update your video card driver to exclude

    Then reset your preferences - with Photoshop CC you can do it in the preferences. Earlier versions require that you press the modifier keys that you launch Photoshop. Ctrl alt shift on Windows or cmd opt shift on Mac.

  • Start-up/login problem. Vista starts by the boot sequence then cursor and black screen appears but nothing else.

    My laptop recently locked up when running a DVD rip, I waited an hour or so to see if he would respond, but he didn't, so I turned off the laptop by holding the power button down. I restarted the computer and it loaded correctly to the logon screen and allowed me to log in as usual. Once the computer was connected, I noticed that the sidebar was not loading, and when I click on what whether the locked computer.

    To try to remedy this I tried to start the PC in safe mode to perform a restore could noticed that I had not created restore points. I then tried to fill a start last known good config upward, it did not work. Then, I tried a CHKDSK/r procedure at startup. It worked fine until step 3 of 5, on which he seems to hang, I left it overnight and it was still on the same stage. So I have powerd off the PC and tried to start. But now, the PC is delivered to the black screen and the cursor as shown above.

    I created the new folder of the event log of the prompt on the Vista recovery disc option

    I did a repair to start - no problems found

    I checked that regedit in this \Microsoft\Windows NT\CurrentVersion\Winlogon. shell contains only explore

    When you are looking for through other Forums a cause of this problem appears to be to do with the permissions of the user being changed by the chkdsk does not complete, however I don't see how to fix this through the command prompt.

    As noted, I can access command prompt on the recovery disk. Any help or suggestions are greatly appreciated.

    You already did a great job of troubleshooting - exactly what I would have recommended here if you had not already tried.  Play well!  Here is one that you did not and I would start one you tried (because I feel that it is perhaps the root of the problem.

    Go to start / all programs / accessories / command prompt, right click command prompt and click Run as administrator (you can skip this step if you are using the disk).

    If you use the drive, cd to C:\Windows\System32. Type sfc/scannow, go and let it run.  It will scan and try to correct some of your system files.  If all goes well he comes complete with no corruption, it could not repair (if it has these post of corruption here or try to analyze it to find the problem or files using http://support.microsoft.com/kb/928228.  Try to put all the corrupt files here so that we can see if they can be repaired with good copies of the installation disc (unless there are too many).

    While in the command prompt, type chkdsk /f /r and enter and let it run.  She might want to plan itself to run at the next reboot (but I don't think that will happen if launched from the disk).   If so, answer Yes and restart to run the program.  It will scan and attempt to resolve any corruption or bad sectors on your hard drive and remove especially as a potential cause.  I know you tried this before, but we'll try again by using a slightly different command and see if it works this time.

    I hope this helps.  If this isn't the case, then we should try to reinstall the system (backup first) as only option short taking in a computer repair shop. But we'll see what happens with the first above.

    Good luck!

    Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • When I start windows media center that a black screen appears

    When media center click (Windows Vista) all that comes up is a black screen, I still have her, when I use the remote control for media center, it seems to work, but I don't see what I'm doing

    Hi grant_689,

    (1) if it works well before?

    (2) remember to make changes?

    Method 1: If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

    http://support.Microsoft.com/kb/929833

    Method 2: Download and install the patch that is available in the link below and then check if it makes a difference

    A black screen on Vista during the installation process of Windows Media Center

    http://support.Microsoft.com/kb/978862

  • Black screen appears 2-3 min long on Satellite L850-F313

    I have problem with my laptop Satellite L850-F313, when I start my laptop computer, a black screen comes after Windows Welcome I see a black screen for 2 or 3 minutes until the desktop is displayed.

    I thought that the black screen comes from Microsoft issue but when I contacted them they told me that I have to check with Toshiba because this problem can be solved by Toshiba.

    Could you please help me?

    Could connect you an external monitor to the laptop and you could check if something would be seen on the external monitor?

    You said that after short time (2 / 3 minutes) the office would appear... Well, for me, it means that the system needs time to complete the start-up procedure.

    Without doubt, the question relates only to some of the problems of the system and so I might recommend to a Toshiba recovery procedure and to check the laptop functionality using the recovered expenses system.

    I don't know what windows system was preinstalled on this laptop, but usually you can use the recovery media created clean in order to start the recovery process, or you can use the recovery of HARD drive... process details should be described in the laptop user manual.

  • Re: Satellite A300-29n - blue screen appears during installation of XP?

    Hello

    I'm working on windows vista and no problems
    When I tried to put in place XP on the machine, after loading windows files
    It was written "the installation program starts windows.
    everything was fine
    a blue screen appeared (a problem has been detected and windows has shut down to prevent damage to the computer...)
    Please help me
    Thank you

    Hello

    Go to BIOS (press F2 during the laptop turn on) and change the compatible SATA AHCI mode.
    Save the changes and try to install again the Win XP on this laptop.

    Good luck

  • tried to install a new copy of Windows XP Home. Everything is OK until the final phase, when the "blue-screen" appeared during the installation of the drivers.

    Installation of xp and blue screen of death

    Hello

    I recently formatted the partition boot and recovery of a laptop Medion2230, then merged the two partitions in a single NTFS partition.  Don't ask why, it's a long story.

    Then, tried to install a new copy of Windows XP Home.  Everything is OK until the final phase, when the "Blue Screen of death" appeared during the installation of the drivers. Restarted and installing XP as normal to repeat the first onboard staged and went to the "blue screen" at the same point as before.

    Using some diagnostic software, I reformatted the drive again, loaded XP set up and I had the same problem.

    Someone knows what to do?

    Thank you allionii123

    Now solved and pc with Windows XP home.

    Discovered a trick online, who said that at the beginning of XP installation, press F5, and this leads to a screen option - select 'standard pc' and continue with the installation of XP.

    (Again), formatted hard drive ran XP installation and followed above point.

    Worked the first time.

    Thank you very much for your advice.

    I think you can pressing F5 or F7...

    How to impose a layer of HAL during an upgrade or an installation of Windows XP

    Impose a HAL

    To prevent Windows XP to automatically determine the system HAL during the upgrade or installation of Windows XP, you can manually force in a system HAL. To impose an Abstraction Layer HAL during a upgrade or installation of Windows XP, follow these steps:

    1. During the phase in text mode of Setup, when you receive the message at the bottom of the screen, press F5:

      Press F6 if you need to install a third-party RAID or SCSI driver.

      Note If you press F7, the Standard PC HAL loads and the ACPI enforcement is bypassed.

    I would not need this except in the systems of many older and low end... :-(  After all, in the same article, for Standard PC they say: "the CPU can be a 386, 486, Pentium, Pentium II, or Pentium III '...

    Thanks for letting us know what you were doing.  Do you have all the necessary drivers after loading Windows XP?  I would not recommend using the default drivers for any hardware - always see what the manufacturer offers on their web page for each component of your system - card motherboard chipset, audio, video, network devices, etc.

  • Windows Vista does not boot, black screen after "windows loading files...". »

    I have a laptop HP Pavilion dv2000, it came with windows vista, so I don't have a boot disk. When I try to start it, it will say "windows loading files...". "with a bar, once the bar is loaded it will say microsoft Corp. (with the copyright symbol) and another bar with a bar made up of three small bars of loading through it, once that is done, it will show a black screen. I have installed recent updates and I can't access the restore mode or security system.

    Hello

    The possible fix is the same that you can not boot the system currently.

    You need to make a computer repair/restore on another disc, borrow a friends Windows disk.
    or buy one from the manufacturer of the system. See the methods in BOLD above which also shows how
    a repair/recovery disk which is bootable.

    It may not be repairable by a user and the help of a real store of the computer (no leeks and peaks at)
    a BestBuy or other BigBox stores) or Support from HP is required.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • When running Need for Speed Most Wanted game a black screen appears and freezes the system

    When running need for Speed \u200b\u200bMost wanted... I am facing problem that I get a black screen and my system hangs... end of mission need for speed... I see a box pop up displays

    get the solution online and qyit

    close the program

    debug the program

    and on the opening of the details, I see this

    Signature of the problem:
    Problem event name: APPCRASH
    Application name: NFS13.exe
    Application version: 1.0.0.0
    Application timestamp: 506ef77f
    Fault Module name: igd10iumd32.dll
    Fault Module Version: 9.18.10.3071
    Timestamp of Module error: 51493b0a
    Exception code: c0000005
    Exception offset: 0001 has 097
    OS version: 6.1.7601.2.1.0.256.48
    Locale ID: 1033
    Additional information 1: 0a9e
    More information 2: 0a9e372d3b4ad19135b953a78882e789
    Additional information 3: 0a9e
    Additional information 4: 0a9e372d3b4ad19135b953a78882e789

    Original title: APPCRASH

    When running need for Speed \u200b\u200bMost wanted... I am facing problem that I get a black screen and my system hangs... end of mission need for speed... I see a box pop up displays

    get the solution online and qyit

    close the program

    debug the program

    and on the opening of the details, I see this

    Signature of the problem:
    Problem event name: APPCRASH
    Application name: NFS13.exe
    Application version: 1.0.0.0
    Application timestamp: 506ef77f
      Fault Module name: igd10iumd32.dll
    Fault Module Version: 9.18.10.3071
    Timestamp of Module error: 51493b0a
    Exception code: c0000005
    Exception offset: 0001 has 097
    OS version: 6.1.7601.2.1.0.256.48
    Locale ID: 1033
    Additional information 1: 0a9e
    More information 2: 0a9e372d3b4ad19135b953a78882e789
    Additional information 3: 0a9e
    Additional information 4: 0a9e372d3b4ad19135b953a78882e789

    What is gd10iumd32.dll?

    These files more often belongs to the product shim NVIDIA D3D drivers.  and were most often developed by the NVIDIA Corporation. These files usually have NVIDIA D3D Shim Driver, Version 331.65 description

    Source:

    http://SystemExplorer.NET/file-database/file/igd10iumd32-dll

    What you can do

    1 see if you have the latest driver from Nvidia display.

    2. If you already later, uninstalling and reinstalling Nvidia Display.

    3 roll back to an older driver

  • Why a blue screen appears during installation of Windows 7 and not setup any OS?

    Dear support team,

    I have a Compaq Presario model: CQ3132L; Product ID: NY682AA-AB4 and serial No.: CNX00304C2. Today, I had a problem while giving a configuration with windows 7 Ultimate. A blue screen appeared and the error code was: 0x0000007B. There is a link below which shows the exact screenshot I encountered during the installation. I need a solution as soon as POSSIBLE because my PC died and I can't spend a single day without her. Thanks in advance

    link: http://komku.blogspot.com/2010_02_27_archive.html

    Enter the BIOS by typing /holding F10 key to power on. Check if the hard disk controller is set to AHCI or IDE mode. AHCI mode should work, but if it's the current setting, change IDE. If it is set for RAID on AHCI change.

  • Unable to import file HAVE for consequences

    HELO,

    I have problem with importing a file HAVE (images or compostion) in after effect.

    When I try to import it take forever to load (most of the time it loads at all), and all I see is black... and the bar blue loading under the composition Viewer.

    After the chat with the support they told my that This is a problem specific file...

    Someone recognizes the problem?

    I installed CC last week and it's really annoying, I can't work since...


    Thank you all...

    Thank you for your response.

    After a lot of research and testing, I discovered that the problem was with specific files which include some include photos and make files HAVE too heavy to open.

    I remove these photo and After Effects working properly!

    Thank you for your good will.

  • Importing files have effectively in Flash CS5

    Hello

    I import a file in flash that I'll have to use several times in my calendar. What is the optimal way to make changes to a chart of the AI which appears in several places, without seeing your change from first on each of them?

    Any help would be greatly appreciated.

    Thank you!

    If the graphics imported of HAVE show in the library of the Flash animation, duplicate the graphics you need to change. Then you can edit the copy and the original will remain as it was.

    If the AI of the imported graphics are imported directly to the step, select one and then do a movieClip. Select the new movieClip in the library and then reproduce them. You can now edit or change the duplicate without affecting the original imported graphic.

  • Black screen appears in green on the Satellite

    It is a problem that sometimes occurs before which would be fixed on close down and restart. But now, it seems not extinguish. Most of the black spots and a few other colors appear in green. for example, the black toshiba start screen appears entirely green with the usual letters. And after starting, there are green stains all over, especially there where it should be black.

    Can someone help, please?

    Hello

    For me, this looks like a defective screen. It might also be malfunction of the inverter FL.
    However, it seems that there must be a hardware failure. In this case, the only way is to contact Toshiba service for assistance.

    To be 100% sure that it of not a software problem, you can try to recover the operating system or / and try updating the graphics card driver.

Maybe you are looking for

  • Invalid SIM for 6plus iphone 64 GB

    I use a sim card the name of the carrier's cell IDEA. It is a 3 g SIM. He works in any other phone 6 and others also. but ijn my phone, it shows INVALID SIM, ' installed the sim card you are currently is a carrier that does not support ask that this

  • help I need help I am new I am new average chick. I don't know wat I do.

    Hi, I just got intoduced of this regulation thing u3, a guy at the store said its really cool and can do more than the regular usb. but now I'm stuk, I have now the navigation, my biggest concern howevere is that I have to pay for these things there

  • How can I retrieve or recover my file "Download"? I have a Windows Vista 64 - bit operating system. Thank you?

    I have Microsoft Windows Vista 64-bit operating system. I have lost my file "Download".  How retrieve/recover my file "Download"? Thank you Elliott e-mail: * address email is removed from the privacy *

  • backlightStateChange

    I'm trying to detect when the status of backlight is disabled (no matter if my application is in the foreground or background) to launch some discussions then. I am implemented SystemListener2 in my main class and overrides the backlightStateChange m

  • Blue system_service_exception screen every time the system starts

    Okay, so here's the deal: 2 days ago I decided to try an Oculus Rift DK2, it did not work (most likely) because I use a laptop that has an integrated graphics card and a dedicated graphics card, so I decided to restart the computer and attempt to dis