Black screen appears in green on the Satellite

Similar Questions

• Black screen appears whenever I start the laptop.

  Last week whenever I start up my Dell laptop computer, a black screen appears. I asked someone who knew with PC and he thought that it a defective power adapter. I tried to use it on just battery, no luck. At out the battery and the adapter just tried, without success. Adapter again sold, but I will assume that the adapter is not the issue.

  Sometimes it lights for a few seconds, but the black screen appears quickly before you can do something like get online.

  I held a flashlight the monitor and the screen is almost pure... If you look closely enough. Windows has loaded and you can see the wallpaper.

  Does anyone has any idea what caused this and how to fix it. The laptop has been barely used... perhaps 6 months at the most.

  Not sure if related but all updates are underway, antirvirus installed and running whenever the PC starts. Malware program executes and returns its own.

  Any help would be greatly appreciated, especially if it's something I can fix myself.

  Thank you

  Could be that the backlight of the lcd screen has failed. LCDs are sandwiches, with layer lcd sitting in front of a layer of back light. As you can see the Windows desktop without distinction when you look closely, the lcd layer seems to work like the graphics of the pc. Is the pc still under warranty - if so, take it back to the supplier.

• Satellite A25-S3072: black Pixels appear as green pixels

  My laptop A25-S3072 green pixels where black pixels should be, so, in other words, when the Windows XP splash screen appears during startup, the screen is completely green with the exception of the logo of course.

  Each black pixel 'true' is green and that's the problem when Windows runs too. I see that they are not dead pixels because all pixels do it when a black pixel should be there. I had a friend who is a certified Toshiba technician to take a look and he said that it seems that the coffee was spilled on it, but the LCD is fine, there seems to be something with the embedded video.

  I'm fine with the manufacture and repair of desktop computers, but not laptops, if I could if I had to. Can anyone suggest anything in addition to becoming a new laptop or a new motherboard. The MB sounds better than a whole new laptop.

  Another thing, I have to add is that when I bought it on eBay, it was sold because of the little green pixels, but it was reported as appearing here and there, when I actually got the laptop the problem disappeared completely. Then I sent it to UPS because I filed a claim because they damaged the power supply and also the CD and when he sent it back pixels then came green and much worse.

  Nothing helped, torsion of the LCD screen, it hit a little, at all, nothing will do it. So its strange because after I bought through eBay, UPS delivered and the so-called problem was non-existent, so I sent it to UPS, then it it shipped back and the problem was there.

  Can anyone help please?

  Is not easy to say how much the repairs would cost. This depends mainly on the corrupt parties. If an FL inverter failures then the repairs should t be expensive

• Satellite U405 black screen when I surfed on the internet

  Madam, Sir, I am a student in the third year and my laptop has a problem, I need help. This will be the black screen when I surfed on the internet for over 3 hours. Why?

  I guess my laptop battery is the key to the problem and a few friends recommend a battery for me web.
  What do you think about this?

  Your ad is a little strange to me.
  How you can surf internet if the screen is black? I mean, it's not logical for me.
  What Toshiba laptop model do you have?

• black screen appears in windows movie maker

  My windows Movie Maker allows to work properly, I have windows vista, but this last year, when creating and previewing my film but nothing black screen appear instead of my movie... Don't know what happened. Even if idon't preview I will burn the dvd and then play on my dvd player and I still get the image black all through the film I've done. I tried to change all the filters in any way diff but no luck. I can't get any help from anyone. Help!

  Maybe... I want to say just maybe you would have a
  best result with and older version of Movie Maker.

  No guarantee but the next for an installable download
  version of Vista Movie Maker 6 may be worth a try

  * Proceed at your own risk *.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Windows Movie Maker Installer for Windows 7
  http://noeld.com/programs.asp?cat=video#wmminst

  Also, Movie Maker 2.6 will work on Windows 7:

  Windows Movie Maker 2.6
  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&id=34
  (this is similar to the version of Win XP Movie Maker 2.1)

• Start-up problems: I have a black screen when I log in the menu

  When I start my computer, I get a black screen when I log in the menu. I can still access the computer on safe mode, but I can't find a solution. Antivirus Avira found no detection, so I don't think that's associated virus.

  Follow these steps to try to solve your problems of boot.

   

   

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Scan with Malwarebytes in SafeMode with networking to ensure:

  http://www.Malwarebytes.org/MBAM.php

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  Download, install, upgrade and scan once a fortnight...

  How to use Malwarebytes once it is installed and updated:

  1. open Malwarebytes > click the update tab at the top > get the latest updates.

  2. on the Scanner tab, make sure that thePerform quick scan option is selected and then click on theScan button to start scanning your computer

  3 MBAM will now start to scan your computer for malware. This process can take some time.

  4. when the scan is complete, a message box will appear

  5. you must click on the OK button to close the message box and continue the process of Malwareremoval.

  6. you will now be at the main scanner screen. At this point, you must click on the button toview the result .

  7. a screen showing all of the malware displayed the program that is

  8. you must now click remove selection button to remove all the listed malware. MBAM will now delete all of the files and registry keys and add them to the programs quarantine. When you remove files, MBAM may require a restart in order to eliminate some of them. If it displays a message stating that it needs to restart, please let him do. Once your computer has rebooted, and logged in, please continue with the remaining steps.

  9. when MBAM has finished remove the malware, it will open the scan log and display it in Notepad. See the log as desired, and then close the Notepad window.

  10. you can now exit the MBAM program.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  It's Vista Security Forum.

  If the above does not she, repost in the Vista repair and recovery Forum:

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/threads

  See you soon.

  Mick Murphy - Microsoft partner

• Black screen on startup instead of the splash screen

  Sometimes it shows a black screen instead of the start screen and I have to restart my laptop using ctrl + alt + delete.

  This happens at every start, but sometimes it takes a little more time to the log on screen (which shows the name and photo of the user) and a black screen appears with no option, same shortcut as windows, windows + D, windows + I, windows + C etc works on this screen. What conclusion I came up with, it is "there is no other choice, rather than using ctrl + alt + del-> restart" and then it works normally.

  am using alt + ctrl + del options to lock, ease of access, etc. Task Manager & the option to as well as I use to start my laptop and it starts normally.

  Then, the most likely scenario is that explorer.exe crushed and for some reason any decided not to try to recover.   Use the Task Manager to test this idea.   For example to enter his Details tab and see if explorer.exe is there, if not, you can use the TM file, run command... to try to run again.   You can also start some diagnostic programs such as trying to get a glimpse on why explorer.exe does not display you its screen start Event Viewer.   As I mentioned a likely explanation for this would be on the bad monitor but then I expect not allow you to see the Ctrl-Alt-Delete menu, no more.  The usability of this scenario is quite wrong and the user should understand the opportunity that can use the keyboard cannot be seen without doing something to change it.

• HP Pavilion HPE h8 - 1213c: black screen of death because of the new graphics card (EVGA geforce gtx 960)

  I just bought a new card (EVGA geforce gtx 960) to kick some butt. But during installation, it seems to be held on a black screen of death? Not the most fun to see... in any case, I had asked the store clerk if it would work and he said to, but it doesn't seem like it does... Is there a new BIOS I should download or something? Any help would be nice...:.

  My computer is a HP Pavilion HPE h8 - 1213c

  The graphics card is an EVGA geforce gtx 960

  If you have both. You can use one or. PIN 8 can be used as a 6 pin as well.

  http://www.EVGA.com/products/ProductList.aspx?type=0 & Family = GeForce + 900 + Series + Family & Chipset = GTX + 960

  2 smaller cards use a single PIN 6. The rest use a single 8 pin.

• my screen shows a black screen and says to enter the system password, how do I reinstall windows if the pc is back to factory settings and wonder a system password

  Don't let me do anything, as soon as I turn on my pc, it goes to the black screen telling me to enter the system password

  It looks like your BIOS password "may" be set.

  What brand of computer do you have?

  If you have an antistatic grounding cable and are comfortable opening your case, you "can" be able to follow a procedure in the manual of your motherboard to reset such password.   If you choose to do so, please be careful because you do so at your own risk.

  WARNING:

  This response comes with absolutely no warranty express or implied.  The author of this response in any way be held responsible for any financial or physical or emotional loss that readers might incur as a result of the advice of this response.

• Invalid product key, left my computer with a black screen and a cursor of the mouse on the boot.

  A few days ago, I tried to upgrade Windows 7 Home Premium (64 bit) to Windows 10 using the free update. Installation hung at 84% for 2 hours, then restarted, was unable to recover the installation and then could not get back to Win 7. This left us with a black screen and a cursor of the mouse on the boot. The computer would remain in this State for about 10 minutes and then reboot and repeat.

  Fortunately, or so I thought, I had a few CD Windows installation backup from the back to the era of digital river. So I thought I'd install fresh on my empty partition, copy my files and data, and then format the partition with the installation broken on.

  I did, but now he tells me that my product key is not valid and cannot be activated. The product key came on a real label on the PC when we bought it.

  The key is for X 16-96072. I installed X 17-58997 (Windows 7 Home Premium x 64 with SP1 (u)). I don't know what is the problem with the key? Should I have installed without the (u)?

  One key 25 digits grouped in 5 sequences of 5 characters not X 17-58997.

  To analyze and solve problems for Activation and Validation, we need to see a full copy of the diagnostic report produced by the MGADiag tool (download and save to the desktop -http://go.microsoft.com/fwlink/?linkid=52012 )
  Once downloaded, run the tool.
  Click on the button continue, after a short time, continue button will change to a copy button.
  Click the copy button in the tool (ignore the error at this stage) and then paste (with r-click and paste or Ctrl + V) in your message.

• I have a new hp running windows 8.1 in turn and have tried to install the adobe reader software.  The installer downloads (1) and I choose to run it, but it is just a blank screen appears.  I checked the Task Manager and it takes memory, but does nothing.

  I have a new hp running windows 8.1 in turn and have tried to install the adobe reader software.  The installer downloads (1) and I choose to run it, but it is just a blank screen appears.  I checked the Task Manager and it takes memory, but does nothing.  After you let it run for 3-4 minutes, I kill the task.  What can I do to get the player installed on this machine?  I tried using chrome, firefox, and explore and get the same results with everyone.

  Try the Installer http://get.adobe.com/reader/enterprise/ offline

• Black screen appears 2-3 min long on Satellite L850-F313

  I have problem with my laptop Satellite L850-F313, when I start my laptop computer, a black screen comes after Windows Welcome I see a black screen for 2 or 3 minutes until the desktop is displayed.

  I thought that the black screen comes from Microsoft issue but when I contacted them they told me that I have to check with Toshiba because this problem can be solved by Toshiba.

  Could you please help me?

  Could connect you an external monitor to the laptop and you could check if something would be seen on the external monitor?

  You said that after short time (2 / 3 minutes) the office would appear... Well, for me, it means that the system needs time to complete the start-up procedure.

  Without doubt, the question relates only to some of the problems of the system and so I might recommend to a Toshiba recovery procedure and to check the laptop functionality using the recovered expenses system.

  I don't know what windows system was preinstalled on this laptop, but usually you can use the recovery media created clean in order to start the recovery process, or you can use the recovery of HARD drive... process details should be described in the laptop user manual.

• Satellite P100: Black screen but I can hear the sound of Windows OS

  Hello

  I have a problem on my Satellite p100.
  I broke the screen or something!

  When I start the computer I press the Start button and the laptop start normal. But the fact is that the computer starts but not the screen.

  The screen is not from, but the computer does!
  The screen is black, but I've heard say that im in windows beacause of the sound beginning...
  I didn't break the screen,

  Can Some1 help me? Please, I beg you!

  Maybe you accidentally switched the display on an external monitor?  :|
  Have you tried to use the FN + F5 key combination to return the display on the laptop?

  In addition, I would recommend linking the external monitor to the laptop to check if something appears on a second external display.

  If this does not help with this strange problem I would recommend contacting the ASP in your country. Maybe, display works really bad and a very small part or whole LCD screen needs to be replaced

  Good luck

• Satellite A100-033 - black screen with no data after the advanced boot option

  I tried each F8 option in the advanced boot options to get my work laptop. There is just a black slowed after repairing Windows files and Loaded. Also F2 & F12 even when I try to use the recovery disk it remans black?
  Safe mode: nothing is displayed on the screen at all

  I noticed my mouse cursor can be seen moving around the screen, but the rest of the area is black.

  OS Windows Basic 32 bit IE9 Satellite A100-033

  Hey,.

  So if you start from the Toshiba Recovery disk you also get a black screen?

  What happens if you start from a normal Microsoft Windows disk? Just to make sure that it of hardware related problem or not

• Start-up/login problem. Vista starts by the boot sequence then cursor and black screen appears but nothing else.

  My laptop recently locked up when running a DVD rip, I waited an hour or so to see if he would respond, but he didn't, so I turned off the laptop by holding the power button down. I restarted the computer and it loaded correctly to the logon screen and allowed me to log in as usual. Once the computer was connected, I noticed that the sidebar was not loading, and when I click on what whether the locked computer.

  To try to remedy this I tried to start the PC in safe mode to perform a restore could noticed that I had not created restore points. I then tried to fill a start last known good config upward, it did not work. Then, I tried a CHKDSK/r procedure at startup. It worked fine until step 3 of 5, on which he seems to hang, I left it overnight and it was still on the same stage. So I have powerd off the PC and tried to start. But now, the PC is delivered to the black screen and the cursor as shown above.

  I created the new folder of the event log of the prompt on the Vista recovery disc option

  I did a repair to start - no problems found

  I checked that regedit in this \Microsoft\Windows NT\CurrentVersion\Winlogon. shell contains only explore

  When you are looking for through other Forums a cause of this problem appears to be to do with the permissions of the user being changed by the chkdsk does not complete, however I don't see how to fix this through the command prompt.

  As noted, I can access command prompt on the recovery disk. Any help or suggestions are greatly appreciated.

  You already did a great job of troubleshooting - exactly what I would have recommended here if you had not already tried.  Play well!  Here is one that you did not and I would start one you tried (because I feel that it is perhaps the root of the problem.

  Go to start / all programs / accessories / command prompt, right click command prompt and click Run as administrator (you can skip this step if you are using the disk).

  If you use the drive, cd to C:\Windows\System32. Type sfc/scannow, go and let it run.  It will scan and try to correct some of your system files.  If all goes well he comes complete with no corruption, it could not repair (if it has these post of corruption here or try to analyze it to find the problem or files using http://support.microsoft.com/kb/928228.  Try to put all the corrupt files here so that we can see if they can be repaired with good copies of the installation disc (unless there are too many).

  While in the command prompt, type chkdsk /f /r and enter and let it run.  She might want to plan itself to run at the next reboot (but I don't think that will happen if launched from the disk).   If so, answer Yes and restart to run the program.  It will scan and attempt to resolve any corruption or bad sectors on your hard drive and remove especially as a potential cause.  I know you tried this before, but we'll try again by using a slightly different command and see if it works this time.

  I hope this helps.  If this isn't the case, then we should try to reinstall the system (backup first) as only option short taking in a computer repair shop. But we'll see what happens with the first above.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.