Black screen C805D - 13G satellite after the switch of the bios to the CSM

Similar Questions

• Satellite A100-033 - black screen with no data after the advanced boot option

  I tried each F8 option in the advanced boot options to get my work laptop. There is just a black slowed after repairing Windows files and Loaded. Also F2 & F12 even when I try to use the recovery disk it remans black?
  Safe mode: nothing is displayed on the screen at all

  I noticed my mouse cursor can be seen moving around the screen, but the rest of the area is black.

  OS Windows Basic 32 bit IE9 Satellite A100-033

  Hey,.

  So if you start from the Toshiba Recovery disk you also get a black screen?

  What happens if you start from a normal Microsoft Windows disk? Just to make sure that it of hardware related problem or not

• Black screen with blinking cursor after the passage in MSC mode

  I followed the recommendation to disable startup secure in the Bios then move the UEFI Bios to the CSM. But when I go to set up what I see is a black screen with a stable cursor in it. And it doesn t go in the Bios.

  The black screen remains.
  I turn off the laptop and once again now, but I still have a black screen with a cursor that is stable and that s it.

  It's like that and it doesn t go to windows even go into the Bios, I can t.
  What should I do?

  Help, please...

  Hello

  After the passage of the CSM and disabling secure boot UEFI mode, you will not be able to boot from the HARD disk as the installation of Windows 8 requires secure boot and the mode of the UEFI.

  Now you can boot from the disc or other media bootable (USB flash key) to install the Windows 7 system.

  I guess you've made these changes installed Windows 7. Right?

  By the way: what model of laptop you have exactly?

• Black screen HP Elitebook 850 after the mode 'sleep'

  Hello

  I have a HP Elitebook 850, which is about 3 weeks old. It is running Windows 8.1 with most of the HP software, which is available for this model, installed.

  Once the laptop goes into mode 'sleep' may not wake up for some reason any. The screen remains black and seeing everything seems normal. The only thing to do is either ctr + alt + delete to restart or shutdown forced by using the power button.

  Any ideas?

  Best regards

  Has exactly the same problem.  Called HP support.  They said that I needed to downgrade the video driver I was using.

  Specifically they asked me to check the version of the video driver first:

  1. Start screen, type "Device Manager" and then click to open Device Manager.
  2. In Device Manager, expand "graphics cards".  There were two shown:
     Radeon (TM) AMD HD 8500/8700 M M
     Intel(r) HD Graphics Family
  3. They asked me to double click on the graphics card Intel.  The dialog box properties open;
  4. On the tab driver properties dialog box, check the Version of the driver.  Mine was 10.18.10.3379.

  HP support and then asked me to download an older version of the driver, 10.18.10.3316.  Here's how:

  (1) on the laptop in question go to hp.com;

  (2) in the Help menu of hp.com, click Download drivers;

  (3) search by product: Enter 'Elitebook 850 G1' and press Go.

  (4) multiple results will come to the top, select the one that says 'HP EliteBook 850 G1 Base model Notebook PC';

  (5) to select the operating system: "Windows 8.1 (64-bit);

  (6) from the Index to download, select 'drivers - Graphics ';

  (7) tΘlΘcharger "Driver Intel video and control panel (International)" version 10.18.10.3316, November 15, 2013.  It's a big download, 158 MB.

  Once the download is complete, double-click the downloaded file to install it.  If you get a dialog box warning you install an earlier version of the driver that is currently installed, click Yes to continue.

  After you have installed the version 10.18.10.3316 driver, I restarted the laptop.

  To test whether the fix had worked I open a text editor and entered the text without saving it (it was to see if the unsaved document would still exist after that the laptop computer woke up from his sleep).  I then put the laptop to sleep by closing the form.  When I opened it again the light behind the power button has been slowly pulsed on and outside and the screen was black.  Based on the presented power button the laptop out of fashion 'sleep' and return to the lock for recording screen in.  Once connected, I found that the unsaved document was still open for the laptop had obviously just slept and rather than restarted rewoken.

  I hope this helps.

• Satellite U405 black screen when I surfed on the internet

  Madam, Sir, I am a student in the third year and my laptop has a problem, I need help. This will be the black screen when I surfed on the internet for over 3 hours. Why?

  I guess my laptop battery is the key to the problem and a few friends recommend a battery for me web.
  What do you think about this?

  Your ad is a little strange to me.
  How you can surf internet if the screen is black? I mean, it's not logical for me.
  What Toshiba laptop model do you have?

• Black screen on startup Satellite A80

  I get a black screen at startup what is the problem and what is the solution for it? It might have something to do with the cold?

  Hi poly

  Please put more details on the problem, because it s not easy to say what has happened without any detailed information. You hear the operation of the HARD disk or fans?
  Switch you to other devices to display, before this problem occurs?
  Unfortunately it FN + F5 key combination doesn't work if the operating system has started so it could be a malfunction of the equipment. I don t think you can solve this problem by yourself. In this case, the only way is to contact the service.

• Invalid product key, left my computer with a black screen and a cursor of the mouse on the boot.

  A few days ago, I tried to upgrade Windows 7 Home Premium (64 bit) to Windows 10 using the free update. Installation hung at 84% for 2 hours, then restarted, was unable to recover the installation and then could not get back to Win 7. This left us with a black screen and a cursor of the mouse on the boot. The computer would remain in this State for about 10 minutes and then reboot and repeat.

  Fortunately, or so I thought, I had a few CD Windows installation backup from the back to the era of digital river. So I thought I'd install fresh on my empty partition, copy my files and data, and then format the partition with the installation broken on.

  I did, but now he tells me that my product key is not valid and cannot be activated. The product key came on a real label on the PC when we bought it.

  The key is for X 16-96072. I installed X 17-58997 (Windows 7 Home Premium x 64 with SP1 (u)). I don't know what is the problem with the key? Should I have installed without the (u)?

  One key 25 digits grouped in 5 sequences of 5 characters not X 17-58997.

  To analyze and solve problems for Activation and Validation, we need to see a full copy of the diagnostic report produced by the MGADiag tool (download and save to the desktop -http://go.microsoft.com/fwlink/?linkid=52012 )
  Once downloaded, run the tool.
  Click on the button continue, after a short time, continue button will change to a copy button.
  Click the copy button in the tool (ignore the error at this stage) and then paste (with r-click and paste or Ctrl + V) in your message.

• HP Pavilion HPE h8 - 1213c: black screen of death because of the new graphics card (EVGA geforce gtx 960)

  I just bought a new card (EVGA geforce gtx 960) to kick some butt. But during installation, it seems to be held on a black screen of death? Not the most fun to see... in any case, I had asked the store clerk if it would work and he said to, but it doesn't seem like it does... Is there a new BIOS I should download or something? Any help would be nice...:.

  My computer is a HP Pavilion HPE h8 - 1213c

  The graphics card is an EVGA geforce gtx 960

  If you have both. You can use one or. PIN 8 can be used as a 6 pin as well.

  http://www.EVGA.com/products/ProductList.aspx?type=0 & Family = GeForce + 900 + Series + Family & Chipset = GTX + 960

  2 smaller cards use a single PIN 6. The rest use a single 8 pin.

• HP Pavilion dv6000 (Vista) starts with a blank screen with a cursor after the original hp logo screen.

  HP Pavilion dv6000 (Vista) starts with a blank screen with a cursor after the original hp logo screen.  Cannot get it to boot Windows.  Any thoughts on next steps?

  I remove the hard drive and attach it to your desktop and use the host operating system to run a check disk on your drive.  The laptop goes hard disk looking for instructions to start and he does not see the correct code.  This is probably due to a damaged boot sector.  Another idea is that your bios has changed and you have changed the SATA from AHCI to IDE type somehow or vice versa. You also left a non bootable disk in the DVD/CD drive.  Remove all disks from your DVD.

• my screen shows a black screen and says to enter the system password, how do I reinstall windows if the pc is back to factory settings and wonder a system password

  Don't let me do anything, as soon as I turn on my pc, it goes to the black screen telling me to enter the system password

  It looks like your BIOS password "may" be set.

  What brand of computer do you have?

  If you have an antistatic grounding cable and are comfortable opening your case, you "can" be able to follow a procedure in the manual of your motherboard to reset such password.   If you choose to do so, please be careful because you do so at your own risk.

  WARNING:

  This response comes with absolutely no warranty express or implied.  The author of this response in any way be held responsible for any financial or physical or emotional loss that readers might incur as a result of the advice of this response.

• Start-up problems: I have a black screen when I log in the menu

  When I start my computer, I get a black screen when I log in the menu. I can still access the computer on safe mode, but I can't find a solution. Antivirus Avira found no detection, so I don't think that's associated virus.

  Follow these steps to try to solve your problems of boot.

   

   

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Scan with Malwarebytes in SafeMode with networking to ensure:

  http://www.Malwarebytes.org/MBAM.php

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  Download, install, upgrade and scan once a fortnight...

  How to use Malwarebytes once it is installed and updated:

  1. open Malwarebytes > click the update tab at the top > get the latest updates.

  2. on the Scanner tab, make sure that thePerform quick scan option is selected and then click on theScan button to start scanning your computer

  3 MBAM will now start to scan your computer for malware. This process can take some time.

  4. when the scan is complete, a message box will appear

  5. you must click on the OK button to close the message box and continue the process of Malwareremoval.

  6. you will now be at the main scanner screen. At this point, you must click on the button toview the result .

  7. a screen showing all of the malware displayed the program that is

  8. you must now click remove selection button to remove all the listed malware. MBAM will now delete all of the files and registry keys and add them to the programs quarantine. When you remove files, MBAM may require a restart in order to eliminate some of them. If it displays a message stating that it needs to restart, please let him do. Once your computer has rebooted, and logged in, please continue with the remaining steps.

  9. when MBAM has finished remove the malware, it will open the scan log and display it in Notepad. See the log as desired, and then close the Notepad window.

  10. you can now exit the MBAM program.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  It's Vista Security Forum.

  If the above does not she, repost in the Vista repair and recovery Forum:

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/threads

  See you soon.

  Mick Murphy - Microsoft partner

• Icons and black screen that appears when published the missing LMS

  Hello

  I tried to search online, but need some advice on how to solve a problem of publication I encounter.

  Captivate 7

  SCROM 1.2

  When I run a SWF file via my IE browser, I have no missing icons or black screen that appears. During the generation of the content to publish SWF with HTML5, it passes through successfully.

  When it is published through LMS, couple of slides in the length of the content, I am facing some missing icons and black screen. I read an article saying check on imsmanifest.xml that could help solve the problem. But watch and read the code, I am pretty well confused to determine what lack us here.

  Comments or the recommendation how I can solve this problem?

  Concerning

  AJ

  Publish your Cloud SCORM LMS SCORM online and test the functionality here.  If he plays as expected, the problem is with your own LMS and you must get their technical staff working on the problem.

• Screen does not light after the start, but after standby on Satellite M100

  Hello
  I have some experience with computers and laptops, but this problem exhausted all of my knowledge.
  My girlfriend has a Toshiba Satellite M100, PSMA1E. He currently works on Windows XP, SP3.
  The laptop has always had problems closing/stand bye. He would stand bye and the screen would not. She would usually be manually turn off (holding the power button) and restart.

  Same thing happened last week, but with me. I turned off the power button but when I turned it on the screen was completely black. After a few attempts, I realized that everything worked; I could hear the usual audio files and XP Boot, but there was no way I could get the job of the screen.

  The strangest thing is that the CMOS/BIOS, one with the Toshiba logo settings screen, also does not appear. If it's an OS problem, I thought that I would be able to access the BIOS at least, but it does not work. FN + F5 does not work.

  Then, strange yet something happened. I was turning it on and off with keyboard shortcuts and I realized that if I put on stand bye using shortcuts and then go back on the screen turns on perfectly well (there is a cause of adjustment resolution icons are irrelevant, but it works perfectly fine).

  From that on I tried everything I know. Update the BIOS, all Windows XP updates, all Toshiba QuickFix, cleaning the registry with different tools, uninstall and reinstall the video driver (ATI Radeon X 1400) utility, shortcuts keyboard, power saver, tools hardware Toshiba, looking to start up programs, services, everything I could possibly think off.

  What intrigues me is that the Toshiba start screen will not be displayed. I can't access the BIOS, but I tried to restore the standard values of the BIOS with Toshiba hardware tools. It did not work. I don't even know if reinstalling XP will work because whenever I turn it on it is all black and I have to make the stand bye / Tower on Tower.

  When I have it plugged into an external monitor, I could see all starting the process (initial screen of the BIOS and Windows). I then tried to access the video driver display configuration but it would show only the external monitor. It would only detect the laptop screen after a stand bye / turn back on, and then it worked perfectly: the screen two screens simultaneously, extended, everything. Ah, changing BIOS selection automatic the LCD + external monitor does not work.

  I am really puzzled here and I can't understand it. I really don't think it's a hardware problem, because the screen works 100% after the stand bye. I guess that XP is do something during the closing down that completely 'stops' my screen, even after starting, and then I can only turn it on with the thing stand bye.

  Any help would be really appreciated!

  Best,

  Hi guys

  I had a similar problem on a series of Satellite A200 and I could solve works to update the BIOS and update the graphics driver.
  In addition, you must make sure that all available MS fixes and patches have been installed.

  Unfortunately, but that's all I can suggest. If the problem persists and you would not be able to solve update components then an ASP needs to check.

  Good luck

• Satellite P100: Black screen but I can hear the sound of Windows OS

  Hello

  I have a problem on my Satellite p100.
  I broke the screen or something!

  When I start the computer I press the Start button and the laptop start normal. But the fact is that the computer starts but not the screen.

  The screen is not from, but the computer does!
  The screen is black, but I've heard say that im in windows beacause of the sound beginning...
  I didn't break the screen,

  Can Some1 help me? Please, I beg you!

  Maybe you accidentally switched the display on an external monitor?  :|
  Have you tried to use the FN + F5 key combination to return the display on the laptop?

  In addition, I would recommend linking the external monitor to the laptop to check if something appears on a second external display.

  If this does not help with this strange problem I would recommend contacting the ASP in your country. Maybe, display works really bad and a very small part or whole LCD screen needs to be replaced

  Good luck

• Black screen appears in green on the Satellite

  It is a problem that sometimes occurs before which would be fixed on close down and restart. But now, it seems not extinguish. Most of the black spots and a few other colors appear in green. for example, the black toshiba start screen appears entirely green with the usual letters. And after starting, there are green stains all over, especially there where it should be black.

  Can someone help, please?

  Hello

  For me, this looks like a defective screen. It might also be malfunction of the inverter FL.
  However, it seems that there must be a hardware failure. In this case, the only way is to contact Toshiba service for assistance.

  To be 100% sure that it of not a software problem, you can try to recover the operating system or / and try updating the graphics card driver.