black screen crash

Similar Questions

• MacPro4, 1 black screen crashes

  MacPro4, 1, 2.26 8-core, 16 GB RAM, video card from Nvidia 560 2.5 GB, disk internal 1 TB (5).

  4 disks striped SoftRAID(4) RAID 5, 1 system drive.

  OSX 10.10.5 running Adobe CCSuite and Final Cut Pro 7 suite for video, web, picture of the work.

  Sometimes crashing to black screen and readers winding down to the last few weeks.  Seems not related to the application in use.

  I tested all the RAM with Rember 4 cycles, then switched locations with all the RAM and tested 4 cycles with Rember again.  The cards past.

  Checked the activity monitor while the round-trip first, After Effects and Photoshop, memory used is of about 6-7 GB and Cache is about 6-7 GB, leaving sometimes 1-2 GB free.

  I add more RAM, would be the activity monitor just fill out more with cache ram or maybe it solves the random black screen crashes?

  Panic every accident report shows something like these.

  Thu Apr 28 09:18:56 2016

  Panic report *.

  Machine-check capabilities: 0x0000000000001c09

  family: 6, model: 26 stepping: Firmware 5:17

  signature: 0x106a5

  Intel (r) CPU of Xeon E5520 at 2.27 GHz

  9 banks of error reports

  panic (appellant cpu 6 0xffffff800e0177ea): "control of Machine 0xffffff7f8ff2b242, registers: \n" "CR0: 0x000000008001003b, CR2: 0 x 0000000109148000, CR3: 0x0000000010ace000, CR4: 0x0000000000002660\n" "RAX: 0 x 0000000000000020, RBX: 0xffffff802be8c800, Recommissioning: 0 x 0000000000000001, RDX: 0x0000000000000000\n" "RSP: 0xffffff81cbbabd40, PBR: 0xffffff81cbbabd70, IHR: 0 x 0000000000000006, RDI: 0xffffff802b7d5400\n" "R8: 0 x 0000000000000000, R9: 0x000007bd1d74c865, R10: 0 x 0000000000000000, R11: 0x00000000e0000000\n ' ' R12: 0 x 0000000000000006, R13: 0xffffff802b7c06c0, R14: 0x00000000000007b0, R15: 0xffffff7f8ff47e20\n" "RFL" ': 0 x 0000000000000046, RIP: 0xffffff7f8ff2b242, CS: 0 x 0000000000000008, SS: 0x0000000000000010\n "" error code: 0x0000000000000000\n"@/SourceCache/xnu/xnu-2782.50.2/osfmk/i386/trap_native.c:1 68.

  Backtrace (CPU 6), frame: return address

  0xffffff81ebc25e90: 0xffffff800df2ad21

  0xffffff81ebc25f10: 0xffffff800e0177ea

  0xffffff81ebc26070: 0xffffff800e03454f

  0xffffff81cbbabd70: 0xffffff7f8ff231e9

  0xffffff81cbbabe60: 0xffffff7f8ff225b4

  0xffffff81cbbabf20: 0xffffff800e01898e

  0xffffff81cbbabf40: 0xffffff800df41deb

  0xffffff81cbbabf90: 0xffffff800df42330

  0xffffff81cbbabfb0: 0xffffff800e0116e7

  Extensions of core in backtrace:

  com.apple.driver.AppleIntelCPUPowerManagement (218.0) [0844CEE1-814F-3BCC-B8AD-B0 21FF882343]@0xffffff7f8ff20000-> 0xffffff7f8ff4afff]

  Corresponding to the current thread BSD process name: kernel_task

  Boot args: nvda_drv = 1

  Mac OS version:

  14F1713

  Kernel version:

  14.5.0 Darwin kernel version: Mon Jan 11 18:48:35 PST 2016; root:XNU-2782.50.2~1/RELEASE_X86_64

  Kernel UUID: A503418E-2182-3864-AEA5-79374A30A241

  Slide kernel: 0x000000000dc00000

  Text of core base: 0xffffff800de00000

  Text __HIB base: 0xffffff800dd00000

  Name of system model: MacPro4, 1 (Mac-F221BEC8)

  Availability of the system in nanoseconds: 8525474790969

  last load kext to 269784140339: com.apple.filesystems.msdosfs 1.10 (addr 0xffffff7f8f0ec000 size 69632)

  kexts responsible:

  com.nvidia.CUDA 1.1.0

  com Paragon - software.filesystems.ntfs 187.1.14

  com.nvidia.web.GeForceWeb 10.0.5

  com.nvidia.web.NVDAGF100HalWeb 10.0.5

  com.nvidia.web.NVDAResmanWeb 10.0.5

  com AJA. 12.3.8 IOKit.NTv2

  com.sony.pci.SxS 1.0

  com.nvidia.NVDAStartup 10.0.5

  com GenesysLogic.driver.GLLUD 8.8.8

  com.softraid.driver.SoftRAID 5.5

  BREAKING-

  Fri 29 Apr 09:32:52 2016

  Panic report *.

  panic (cpu 14 0xffffff800adf77b3 appellant): "TLB invalidation IPI timeout:" "CPU has not responded to interruptions, on which the bitmap of the CPU: 0x400, accused of receiving NMIPI: orig: 0x0, now: 0x0"@/SourceCache/xnu/xnu-2782.50.2/osfmk/x86_64/pmap.c:2480 ' "»

  Backtrace (CPU 14), Frame: Return address

  0xffffff81f305b3a0: 0xffffff800ad2ad21

  0xffffff81f305b420: 0xffffff800adf77b3

  0xffffff81f305b4b0: 0xffffff800adfdaa3

  0xffffff81f305b5a0: 0xffffff800adfe775

  0xffffff81f305b600: 0xffffff800adac625

  0xffffff81f305b710: 0xffffff800ada22ac

  0xffffff81f305b740: 0xffffff800ad9e123

  0xffffff81f305b770: 0xffffff800ad3384a

  0xffffff81f305b790: 0xffffff800b227d71

  0xffffff81f305b7d0: 0xffffff800b212d2c

  0xffffff81f305b7f0: 0xffffff800af7f10d

  0xffffff81f305b830: 0xffffff800af7ed04

  0xffffff81f305b890: 0xffffff800af6e427

  0xffffff81f305b8f0: 0xffffff800af61f46

  0xffffff81f305b990: 0xffffff800af4d708

  0xffffff81f305bbd0: 0xffffff800af4e2e0

  0xffffff81f305bf50: 0xffffff800b24af3a

  0xffffff81f305bfb0: 0xffffff800ae34198

  The process corresponding to the current thread BSD name: AdobeUpdateDaemo

  Boot args: nvda_drv = 1

  Mac OS version:

  14F1713

  Kernel version:

  14.5.0 Darwin kernel version: Mon Jan 11 18:48:35 PST 2016; root:XNU-2782.50.2~1/RELEASE_X86_64

  Kernel UUID: A503418E-2182-3864-AEA5-79374A30A241

  Slide kernel: 0x000000000aa00000

  Text of core base: 0xffffff800ac00000

  Text __HIB base: 0xffffff800ab00000

  Name of system model: MacPro4, 1 (Mac-F221BEC8)

  Availability of the system in nanoseconds: 10523372422492

  last load kext to 269071529336: com.apple.filesystems.msdosfs 1.10 (addr 0xffffff7f8beec000 size 69632)

  kexts responsible:

  com.nvidia.CUDA 1.1.0

  com Paragon - software.filesystems.ntfs 187.1.14

  com.nvidia.web.GeForceWeb 10.0.5

  com.nvidia.web.NVDAGF100HalWeb 10.0.5

  com.nvidia.web.NVDAResmanWeb 10.0.5

  com AJA. 12.3.8 IOKit.NTv2

  com.sony.pci.SxS 1.0

  com.nvidia.NVDAStartup 10.0.5

  com GenesysLogic.driver.GLLUD 8.8.8

  com.softraid.driver.SoftRAID 5.5

  com Apple.filesystems.msdosfs 1.10

  BREAKING-

  Fri 29 Apr 15:40:30 2016

  Panic report *.

  panic (the appellant 2 cpu 0xffffff80187f77b3): "TLB invalidation IPI timeout:" "CPU has not responded to interruptions, on which the bitmap of the CPU: 0x100, accused of receiving NMIPI: orig: 0x0, now: 0x0"@/SourceCache/xnu/xnu-2782.50.2/osfmk/x86_64/pmap.c:2480 ' "»

  Backtrace (2 CPU), Frame: Return address

  0xffffff8210d93840: 0xffffff801872ad21

  0xffffff8210d938c0: 0xffffff80187f77b3

  0xffffff8210d93950: 0xffffff80187fdaa3

  0xffffff8210d93a40: 0xffffff80187fe775

  0xffffff8210d93aa0: 0xffffff80187ac625

  0xffffff8210d93bb0: 0xffffff80187a22ac

  0xffffff8210d93be0: 0xffffff80187c5301

  0xffffff8210d93c20: 0xffffff801898933d

  0xffffff8210d93d20: 0xffffff8018b3e6aa

  0xffffff8210d93db0: 0xffffff8018964141

  0xffffff8210d93e50: 0xffffff8018beb9ea

  0xffffff8210d93ef0: 0xffffff8018beb753

  0xffffff8210d93f50: 0xffffff8018c4b316

  0xffffff8210d93fb0: 0xffffff80188344a6

  Corresponding to the current thread BSD process name: mdworker

  Mac OS version:

  14F1713

  Kernel version:

  14.5.0 Darwin kernel version: Mon Jan 11 18:48:35 PST 2016; root:XNU-2782.50.2~1/RELEASE_X86_64

  Kernel UUID: A503418E-2182-3864-AEA5-79374A30A241

  Slide kernel: 0 x 0000000018400000

  Text of core base: 0xffffff8018600000

  Text __HIB base: 0xffffff8018500000

  Name of system model: MacPro4, 1 (Mac-F221BEC8)

  Availability of the system in nanoseconds: 401593817410

  last load kext to 304120518670: com.apple.filesystems.msdosfs 1.10 (addr 0xffffff7f998ec000 size 69632)

  kexts responsible:

  com.nvidia.CUDA 1.1.0

  com Paragon - software.filesystems.ntfs 187.1.14

  com AJA. 12.3.8 IOKit.NTv2

  com.sony.pci.SxS 1.0

  com.nvidia.NVDAStartup 10.0.5

  com GenesysLogic.driver.GLLUD 8.8.8

  com.softraid.driver.SoftRAID 5.5

  com Apple.filesystems.msdosfs 1.10

  com.apple.driver.AppleHWSensor 1.9.5d0

  com.apple.driver.AppleGraphicsDevicePolicy 3.7.7

  com.apple.driver.AppleTyMCEDriver 1.0.2d2

  com.apple.driver.AGPM 110.19.6

  com.apple.driver.AppleUpstreamUserClient 3.6.1

  com.apple.driver.AppleMCCSControl 1.2.12

  com.apple.GeForce 10.0.4

  I tested all the RAM with Rember 4 cycles, then switched locations with all the RAM and tested 4 cycles with Rember again.  The cards past.

  Of course, they did. Your Mac's memory error correction.

  Normally, this first fragment of panic report would indicate a memory error double bit. But it lacks some of the typical characteristics of these reports.

  Show you fragments of the second panic report all TLB invalidation timeout - a problem with the cooperation of several processors (including the graphic processor).

  But the part of control of machine of it concerns me. I think that it is possible, you have a bad treatment, but cannot be ruled out just a bad graphics card.

• The RAM lot shown on Sys. Info. but the correct amount of shows mycomp/properties, black screen was crashing...

  Although quick and concise as possible. PC under XP SP3 Pro with AMD Athelon 2.41 GHz and had two sticks of 1 GB of ram with 256 MB radeon x 1650 just to use dual monitor graphics card. A few weeks ago it started to break up during different tasks, no bsod or error message, just a black screen crash and reboot. He wouldn't even say ms recovered or give me an option to boot safe mode or anything like that, just acted like it never happened. The typical check/clean/test when discovered that even if sys properties reported two GB of info sys ram only showed 256 MB total physical. Thought it was a RAM problem, took a stick, works slowly but not crash, exchanged, even. Put two sticks in another pc, no crash and it reads 2 Go in the properties and 2 048 Mo in sys info. Took the four MB 512 out of this pc put into this one, nothing, does not start. Put the 1 GB in works slowly with no crash, but reads only 128 MB of ram in sys info, while always reading 1 GB in comp/properties...

  So my question is: is this a power supply motherboard problem or power, or am I just missing something here? I wonder on BIOS or CMOS, but they have not been affected or modded and it worked. In addition, av is up-to-date with no reports of virus.

  Looks like you got a BSOD but just don't see it because XP is supposed to relaunch on these failures.  If your system is configured to save dump files, we can always get infromation from last bit depressed.  If the sytem is not configured to save dump files, make sure and then let a few dump files accumulate so we have something to look at.

  If you are forced to do so, you can certainly guess all what he could be and try things.

  Please provide more information on your system.

  Click Start, run and enter in the box:

  Msinfo32

  Click OK, and when the system info summary appears, click Edit, select all, copy and paste then return here.

  For information about video drivers, expand components, click view, click on edit, select all, copy and then paste that information here.

  There would be some personal information (such as the user name and the name of the system), or what seems to be only your business that you can remove the dough.  Send two copy/pasta.

  XP is configured to restart automatically on some system failures, you will need to disable this feature for BSOD information will remain on the screen for you to see.

  Configure your system does not automatically restart on system failure (this is what he wants to do):

  Right click my computer, properties, advanced, startup and recovery settings.

  In the system failure section:

  Put a check mark in the box "write an event to the system log.

  Put a check mark in the box "send an administrative alert.

  Uncheck 'automatically restart '.

  In the Write debugging information section select:

  Partial dump (64 KB)

  Set the directory small dumpster:

  %SystemRoot%\Minidump

  Click OK, OK.

  Restart your computer.

  What is your system brand and model?

  Describe your current antivirus and software anti malware situation: McAfee, Norton, Spybot, AVG, Avira!, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..

  Download BlueScreenView here:

  http://www.NirSoft.NET/utils/blue_screen_view.html

  Unzip it and run it (BSV installs nothing) and let him complete the digitization of all of your files to dump.

  If you double-click on depressed, you will get information on it (including the field caused by the driver) and you should be able to spot the problem right away - especially if you see a model in landfills where Caused by field pilot is the same (beginning with this driver).

  Select (highlight) one or more of the most recent dump files by clicking on them and hold down the CTRL key to select multiple files.  Try to select only the most recent links that relate to your problem (perhaps five or six to start dump files).

  Click on file, save selected items and save information from the dumps to a text file on your desktop called BSOD.txt.  Open BSOD.txt with a text editor, copy the text and paste it in your next reply.

  Here's an example of report ASB to a single BSOD I initiated on purpose that indicates the cause of the accident as the pilot i8042prt.sys belonging to Microsoft Corporation:

  ==================================================

  Dump file: Mini062110 - 01.dmp

  Crash time: 21/06/2010-11:51:31

  Bug Check String: MANUALLY_INITIATED_CRASH

  Bug check code: 0x000000e2

  Parameter 1: 0x00000000

  Parameter 2: 0x00000000

  Parameter 3: 0x00000000

  Parameter 4: 0x00000000

  Caused by the driver: i8042prt.sys

  Caused by the address: i8042prt.sys + 27fb

  Description of the file: i8042 Port driver

  Product name: Microsoft® Windows® Operating System

  Company: Microsoft Corporation

  File version: 5.1.2600.5512 (xpsp.080413 - 2108)

  Processor: 32-bit

  Computer name:

  Full path: C:\WINDOWS\minidump\Mini062110-01.dmp

  ==================================================

  Send information from 5 last memory dumps.

  I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• Crash black screen on DirectX games in Windows 7

  First of all, if you take the time to read this... Thank you in advance. I realize it's not easy. If its in the wrong place please move, but I don't know what is causing the problem...

  I'm fighting a recurring problem on the PC of my son for some time. I'm quite known in customized versions and have never had a problem persisting who me before perplexed.

  There used to be an old Intel Q9650 system based on an ASUS P5B Deluxe/WiFi-AP mobo. 8 GB ram Corsair XM3, OC secondary disk of 60 GB SSD and seagate 500 GB, card Nvidia, Silent-Pro 550w PSU 295GTX.

  The system would, on some games and after certain periods of time to a black screen crash, sometimes with a sound loop. All temperatures were within normal limits as the Arctic Pro CPU cooler and other fans were good Setup. The PSU has been good and tested in other platforms and toggled to eliminate information. The worst games were Napoleon Total War and Balanced Annihilation running on the engine of spring... this one is interesting because it's a mouse on the plan of the GPU/CPU power it takes. A true end bottom of the game.

  Pilots were all to date and tested OK memory with memtest. I ran several programs benchtest to push/stresstest the CPU and GPU and they crashed at all.

  Tried to exchange the components of my PC as memory, graphics card, PSU, and the problem still persisted.

  Finally, I said enoughs enough, and we bought him new components.

  We currently have the following

  Windows 7 Home Premium 64-bit (6.1, Build 7600)
  Card mother Gigabyte GA-H67A-UD3H
  Intel Core i5-3450 CPU @ 3.10 GHz (4 CPUs), ~3.4GHz
  8192 MB Corsair RAM XM3
  OCZ 60 GB SATA-2 HARD drive
  NVIDIA 570GTX
  Silent POWER Pro 750W PSU

  The only bits I brough of the old system are the memory (tested and OK), SSD and it connects to the TV/monitor even.

  And of course the problem persists. The black screens after 2-3 minutes on all directX games, more L4D2. System has all the latest drivers.

  Now here's the interesting bit of, I found a game that is completely unaffected by the issue, Unreal 2004... .it is pure coincidence but this game has no problem at all... works very well never fails, all set to full... coincidence? I do not. Isn't this game in OpenGL? I'm sure that his few misenoma DirectX?

  I have tried everything I can think about, all the same tests were executed and Im totally stumped. I don't see the point in sending to a store to get some bull * so here I turn to the community for help... then... Help!

  Any necessary additional information I can post. Please let me know if you have people from the idea and thank you.

  Try installing the latest nvidia drivers. During installation, you are given the opportunity to do a clean install when it first deletes all traces of previous drivers or programs related to nvidia.

  When you perform the installation, just install video drivers, sound and physx and return to view the results.

  You talked about the tv/monitor, which is it, a TV or monitor? If it comes to a TV, it could be a problem of refresh rate?

  You say you traded to memory, but how did you manage to get DDR2 memory from your old computer to a new motherboard that uses DDR3?

  http://www.Newegg.com/product/product.aspx?item=N82E16813131028

  http://www.Newegg.com/product/product.aspx?item=N82E16813128475

• Games black screen

  I'm about to shake off the balcony of my Alienware 17 x R4. I have a computer game that won't play games and I can't find a way to make do. Whenever I start a game the screen turns black and the game is reduced in the taskbar and won't play no matter what I do. No error message not just an icon in the task bar and I can hear the audio of the game. I tried EVERYTHING I found in ALL the forums, I have visited and nothing works. Is not graphics cards is not the firewall is not the resolution settings, is not the compatibility settings, it is not game management applications, is not the games, is not material, so what causes this problem? I'm more frustrated by that. Please, someone tell me there is a PERMANENT solution to this problem. I'd hate to have to trade my beautiful machine for a Mac, but if it comes to that, I will. I need a computer, I can do everything on including playing games. This seems to be a Windows problem. I use Windows 7 Professional. I'm supposed to be relaxing between semesters at school and take advantage of my free time playing games but I lost 2 weeks trying to solve a seemingly irreparable problem and I have not yet played a single game! Help, please! Thank you!

  "- Online games play very well, but I prefer to play in offline mode." It's only installed games that won't play. »

  Optional update - KB 2670838 is known to cause some problems with games. Unfortunately,.
  If you use IE10 is necessary.
  One of these potential problems is loading games while offline because it can cause some games search
  for an update and if off line looking blocks the loading successfully game (even games that have no line update options). I don't remember what is happening on the machine of my wife (she has many
  'Flash' similar games she gets from the local library), but I could have discovered this problem before
  his machine has been updated.
  BTW - you can disable auto-install optional updates and allow automatic updates with the update 'important '. However, I prefer manual, so I can choose a time to allow the updates to install with full use of machine resources. It reduces the risk of corruption updates.
  It is even more important with graphics driver updated, regardless of the DELL, Nvidia or AMD with
  options for automatic updates.

  While the machine can start in selective startup that does not mean he does not start something
  with Windows, or a Service that can cause a conflict if you want to check this possibility.
  It could also be something that you load manually after you start in Windows. Things like
  system optimization/tweaking software can often lead to problems.

  As games have the same problem with two charts we know that drivers are not at fault.

  I don't remember if it happened when I was KB 2670838 installed, but there is also something in relationship
  games run with black screen crashes that I don't remember and is not my
  Notes (or simply have not found where), but I'll see what I can find.

• Windows 8 will not start, shows a black screen with cursor

  I tried to turn on my hybrid 3 cell / tab lenovo black this morning. After starting, it shows only a black screen with the cursor mouse mobile, but it stays like that for hours, until now. I can't turn it off, nor can I force turn it off by unplugging the battery it has unified the design of the body. What can I do?

  Hello Mel.

  Thanks for posting your question on the Microsoft community.

  Thank you for details on the issue.

  This problem may occur because of corrupted display driver.

  I suggest you use the steps in this article and check if it helps.
  Reference:
  How to solve a problem of black screen crash
  https://support.Lenovo.com/in/Hi/documents/ht079944
  (Also valid for Windows 8)

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Plug the VGA cable causes the crash or black screen on my Thinkpad. Help!

  On my newly purchased W530, a cable VGA-causes a crash or a black screen on my Thinkpad.

  The foregoing happens whenever I have insert the cable VGA which is quite annoying, because I use it with my projector every day.

  Accidents seem to occur more often when I closed the lid and insert the VGA cable. If I open cover more often get a black screen (which remains black even when I leave the cable again).

  I could try to fix this problem?

  Which driver (or other) would be the most likely cause?

  Thanks Adam! :-)

  Yes, as I mentioned, accidents have disappeared after installing the latest driver Nvidias own site.

  Remaining problems are small problems which I can live with to what NVidia fixes if all goes well with an updated driver.

  But it was really great to see instructions on how to start in safe mode on Windows 8. I always wondered who. Thanks again Adam! :-)

• I received a message stating that resources were low. Computer has crashed and when I turned on the computer had black screen

  Original title: drive full D... computer laptop unusable

  I have a HP Pavilion dv7 laptop... computer.  Two months ago I saved mistakedly C drive to D drive.  I soon messages that D was 85% full... knew that I'd made a mistake... bul everything seemed OK.  Has nothing on this subject.  Yesterday, I received a message stating that resources were low.  Computer has crashed just after that.  The computer turns on with only a black screen.  Pressing F8 does not start in safe mode as it does on my PC.  Can someone help me?  Thank you!

  Hi SteveKinney,

  ·         What version of Windows is installed on your computer?

  ·         What is the exact error message?

  ·         Did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: Start in safe mode and do a System Restore to a point before the show.

  See Advanced startup options (including safe mode) for more information about starting in safe mode.

  Method 2: See the following articles and check if the problem still persists.

  Why my screen is black when I start Windows 7?

  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-screen-black-when-i-start-Windows-7

  See also the article mentioned for more information:

  Resolve stop (blue screen) error in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  I hope this helps.

  Thank you all... I brought to a repair shop... He says that the LCD is toasted, the date is displayed correctly on another monitor.  About $200.

• Black screen on startup after windows update 7 crashed

  Hello

  Hope you can help.

  I have windows 7 64 bit installed and everything was fine until last night.

  It seems a windows update has been downloaded and when I turned my PC it was installing the update - the projection of the usual blue installation screen updates etc.

  It took a long time and it seems to me he had crashed, has frozen I couldn't move the mouse.

  Yes I know it says that you should not turn the PC while the update was the installation, but for me, it seemed like it had crashed and frozen upward.

  So I decided turn off the pc and he left the next day to check the pc.

  I turn on the pc and select windows 7 in my list - I have Setup dual boot

  I get the message that windows did not start properly, so I select boot normally - I get the swirly logo appear and then just a black screen with the cursor that responds to moving the mouse.

  There's just the black screen with the cursor and pass to the next step of the login screen.

  I think because of the windows don't update not install correctly and turning the pc off this contributed to hang on the black screen.

  I tried to start in safe mode to see if the same problem which he passes, I can connect via the SafeMode very well and have the available login screen and entered fine windows via safe mode.

  I get ideas as to what I can do to solve this black screen?

  To confirm once again, this has happened after a windows update tries to install, but as I felt it had crashed I turned off the pc - no drivers graphics etc. have been installed for a long time - only this update of windows

  I hope you can help, thank you very much

  InnI

  EDIT: Just to add that I tried to do a restore point, but as I turned it off I don't have the option to do so.

  Hi Martin,

  Thanks for the reply.

  I tried something last night after going through loads of forums.

  I tried F8 for advanced startup options, and I'll give you good last thinking setting up a go, known guess what, it worked!

  I was able to return in Office windows as usual, I even installed the update that it crashed on the last time, well, I think that he reinstalled the last update, it crashed on... anyway, I think I'm back to normal, but will check it out tonight but if you are still having problem try what I did It can work for you.

• After my computer will crash does not start has a black screen with message operating system not found. Responsible for recovery disc but wont start.

  not boot Vista after that computer crashed have a black screen with message operating system not found.recovery discs won't load

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  Above is the way you normally boot from the Vista recovery disks.

  If you have tried to boot from the recovery without success disks, contact the manufacturer of your computer.

  This isn't their recovery process, Microsoft.

  See you soon,.

  Mick Murphy - Microsoft partner

• Occasionally, computer crashes and goes to black screen.

  Original title: computer crashes, black screen

  64-bit Windows.  My computer sometimes freezes.  Screen goes black, trying to restart, give up eventually.  Need to turn it off and restart.  Checked for viruses, registry fixed and whatever other System Mechanic, CC Cleaner and Windows tools can check.  What could be the problem?

  Try to repair your system using the system recovery options. You can access this option by continuously pressing F8 just after the start of your system and choose the advanced startup options.

  Try to repair your system at least 3 to 4 times. In addition, you will also need to check and make sure that you have all the drivers updated and the system is free from malicious trojan software.

  Alternatively, you can also find the solution posted here:

  http://tips4pc.com/articles/computer%20troubleshooting/computer_has_a_black_screen_and.htm

• my game 'SkyRim, Elder Scrolls V' crash, black screen, every few minutes.

  My Games for Windows 'SKYRIM, Elder Scrolls V' game continues to crash every few minutes. I tried everything suggested by the manufacture of game and the site of the game "Steam", where the game is played, but nothing is. I have all my drivers updated. My PC is greater than all the recommended requirements to run the game. I reinstalled the game, updated the game, scanned the game, updated my windows software, you name it I tried it. The game installed and started very well, but after 4-5 minutes of the game, it just hangs at a black screen, with the sound in the game always running. After a minute or so, the sound stops and a humming noise replace. I have to press the button for a few seconds so that the PC to shut down. CTL + alt + delete does not work when the game crashes.

  My PC is a gateway DX4840 with intel Core i5 650 processor running the Windows 7 Home Premium 64-bit @ 3.2 GHz, 4 GB memory DDR3 Ram, ATI Radeon HD 4670 graphics card PCIe with 1 GB of memory, Cox Cable Internet connection with a Motorola cable modem,. & DLink Wireless N Router, 15 MBS

  connection. I TB Sata hard drive, a RW Super Multi DVD/CD drive. Sometimes the game will work very well for half an hour or more before it crashes, but most of the

  time it hangs after only 4 or 5 minutes. I learned to Quicksave my game about every 3 or 4 minutes so that I can make progress. So far, I've played the game for hours 946, which meens it crashed several thousand times so far. As I said before, I've tried everything suggested to solve the problem. Nothing works so far. I'm retired so I have a lot of room on my hands, & I like the game, except for accidents. Any suggestions? Give up, this is NOT an option.

  Update on the problem of crash: I now 1060 + hours of game play and still have not solved the problem of crash. Normally, I run that my computer with no auto update turned on what so ever, not even Windows auto update. I thought that this could be the cause of the Windows error log entry that says "TESV.exe has stopped interacting with Windows and stopped. So I enabled Windows automatic update - no change at all. The game always crashes all the minutes. I noticed that most of the occre crashes just like, or just after that I walk around with my charictor @ change of direction all of a sudden or rapid movement in one direction for a while or for a very long distance. One last thing, I sometimes use "God Mode Cheat Code" to get out of a very difficult situation in the game. The use of cheats in the console will cause outages? If yes how can I disable the protection 'Punk buster type' game modes that could have the default set. I have several Mods installed but I had crashes before I never installed one of the Mods. I have over 50 Mods installed either. I completely run out of ideas and patience with the way to solve this problem. It is, of course, put a damper on my enjoyment of the game. If I was not so bull headed, I would have given to the top a long time ago. I really like the game but cannot aford to buy many more mice or keyboards, to replace the ones I ruined right after a game crash. I splashed several mice out of my wall of the apartment when my temper got the best of me. I think it's better than bottling up anger and having a heart attack. lol just kidding. 2 mouse and 1KO have bit the dust so far but my 2 female roommates are starting to think I'm a little crazy. They ask why I continue to play the game, and I tell them 'because I love so much." New suggestion would be greatly appreciated. Thank you. Gary D. Hoover

  If you look at the forums of Bethesda, the thread "Skyrim plant" is 74 pages, now (http://forums.bethsoft.com/topic/1270631-crashes-during-gameplay/page__st__2190), and no one finds a universal solution for this widespread problem.

  Your computer's specifications are more than OK, it's the game itself that is causing the issues. Some argue lock TESV.exe (executable of the game) to steam is the cause, and revert to the version 1.1 (where TESV.exe can be launched without the steam launcher) stopped the breaks down. Others find that the change in the sound settings helped (24-bit, 44100 Hz). Others, even once, noticed that the 1.3 update (the update of 4GB memory patch) stopped accidents or aggravated their. The use of mods can also be a negative factor. Etc.etc.

  It would help if you had an error log any. Unfortunately, it is not uncommon that spontaneous TCTC happen without leaving any trace, but you can type "perfmon /rel" in the search (without quotes) bar to open the reliability monitor where accidents can be declared as events with a cross within a red circle. For example: one of the users of the forums above could provide a log of errors with "BEX" and "Code of Exception: c0000409 '-c' is a mistake that could be avoided by temporarily disabling DEP, DEP data (enabled by default on 64-bit CPU).

  Regardless of the exact reason in your case: what I can say as a player of all YOUR (I - V) games on different hardware, is that Bethesda has implemented a RCG (random crash generator) in all their game engines. It's so random that you can play a game for 200 hours and nothing happens, it works perfectly. And when you reinstall the next time or start a new game, it crashes so often to be unplayable.

• Display flicker of NVidia and crashed to a black screen on HP IQ500.UK after upgrade of Windows 8

  I have a HP IQ500.UK OS computer original Vista 64 with GeForce 9300 M GS Driver version 174.62. Update of the operating system Windows 8 has replaced the driver NVIDIA version 9.18.13.0286, which is unstable for display, causing frequent display flicker every other second or so, sometimes not get back and goes to black screen. Reboot needed to recover and a phenomenon. The original driver can be deployed in windows 8? HP or Nvidia has a solution? Should I revert to original driver Vista 64?

  Update: I have now the Nvidia driver works and have not had an accident in days. Here's what I did:

  1. You must stop Windows 8 tries to automatically update drivers every time it starts up because that's what's causing all the problems, to do follow this tutorial:
     http://www.c-sharpcorner.com/UploadFile/6cde20/automatically-updates-drivers-in-Windows-8/
  2. Then up to uninstall everything what you have loaded upward and loading the driver VGA Windows options base which is available under find it locally. Do all this in Device Manager
  3. Download the Windows 7 Nvidia driver on the HP support site - don't try Nvidia card who are not compatible
  4. Remove your ethernet cable and/or disable wireless - very important. You'll re-enable it after all this is over, but you do not want Windows to do something unexpected...
  5. Using 7-Zip or some other programs self-extracting unzip the exe that you downloaded. My memory was SP44488 or something like that (I'm at work sorry). Extract it to your desktop or something
  6. Go back into Device Manager, right click on the graphics card and select update or install drivers option.
  7. Select the manual installation option
  8. Select the diskette provided at the bottom of the screen and then go to your exe file extracted in step 4
  9. Windows will look for the name of the driver then install it from there. Your screen, wobbles a bit and you think that its going to crash but mine did not. It takes a while to load so be patient.
  10. Once loaded to reboot the machine. When it restarts it will likely screen black right now that even if you did mine has actually updated the driver to version 9, I think only the first step.
  11. Stop and try again and your father's brother Bob

  I did the above and all my problems disappeared and I have the Nvidia drivers loaded. You'll see the pilot who caused all the problems turn upward in Windows Update as an optional download - INSTALLER DONT IT

  Now, my PC is not the fans screaming as he did when the driver has been disabled and it is much more receptive.

  Hope this helps

  see you soon

  Steve

• HP Pavilion Elite HPE - 400z CTO: H - RS880 - Μatx Motherboard BIOS Update caused crash, to see a black screen now?

  I have a desktop HP Pavilion Elite HPE-400z running Windows 7 (64), my computer was working fine, however I thought that I needed to update the drivers and things from the HP website.

  The first thing I installed was the following: H - RS880 - Μatx Motherboard BIOS Update

  That restarted immediately frozen mouse on a black screen. When I turn on the computer the lights and the fan turns on but the screen remains black. Their is nothing wrong with the monitor, it's light is on, but when turn light it just says: "monitor going to sleep".

  I went through these troubleshooting pages: http://support.hp.com/us-en/product/HP-Pavilion-Elite-HPE-Desktop-PC-series/4269972/model/4300925/do...

  http://support.HP.com/us-en/product/HP-Pavilion-elite-HPE-400-desktop-PC-series/4269972/document/BPH...

  without success.

  Any other suggestions of what I could do to fix this?

  Hello

  Disconnect the PC and press and hold power for 30 seconds. Remove and replace the battery CMOS. It's a $4 item. Now let's see what happens. If no joy, then try the steps above once again.

  If your PC support has been changed or modified then put it back in its original state.

• AoC crashes on black screen after upgrading to Windows 7

  My upgrade to Vista (64 bit) to Windows 7 appears smooth, with all works well. When I tried Age of Conan mmo for the first time, he loaded the game, but within seconds, the screen started flickering black/game/Office a few times alternately between the three with in game its operation across all three screens. After 30 seconds, the screen freezes on the game screen, or freezes on the black screen or briefly blue screens (no time to read the error message) and the computer restarts.

  I have updated drivers for my card (Nvidia 8800GT) video with Windows 7 compatible drivers, and the problem persists.

  The game went well on before Vista upgrade.

  Help!

  Thank you

  Windows Update has nothing to do with the upgrade of Windows. Posting here instead: http://social.answers.microsoft.com/Forums/en-US/w7programs/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft