black screen for 3.5 hours when starting

Similar Questions

• Start the computer to the top, but before the office back I get a black screen for 5 to 15 minutes long.

  Basically what the title says, "computer starts up, but before the office is up I get a black screen for 5-15 minutes long."

  I don't know the problem, looking it up and this is an annoying problem.

  Hi InterestedLearner,
   
  -Have you done recent changes made to your computer before this problem occurred?
   
  Updated the graphics driver and check if it helps fix the problem.
   
  Visit the manufacturer's Web site to do the same.
   
  Take a look at these items as well for more information on updating a driver:
  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Update drivers: recommended links
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-drivers-recommended-links

• Try power upward and he would keep a black screen for a few seconds then turn off and turn on and repeat until I've done a hard stop. I got a message on the svchost.exe

  Original title: help - csvhost.exe and problems to start

  My sons laptop has problems - try to turn on and it would maintain a black screen for a few seconds and then turned off and turn and repeat until I've done a hard stop.  I am able to navigate to the top after repeated attempts.  I could take a quick and complete hard drive test and it passed... Finally, I restored to factory and spent the last 8 hours going through the update process.  It works fine and restart without problems until recently - I followed the instructions to reboot to perform an update, but he had served in the "shutting down" mode for almost an hour I did a firm hard down.  It took a few attempts so he could begin after that, and when I did I had a message on the svchost.exe and thought that might have something to with him... found a site that has a download that is supposed to fix errors and am curious if that is recommended or whether there is another solution or possible make my misfortunes.  The site is: http://www.exe-error-advisor.com/svchost-exe.  I don't know what's happening - the computer works very well when it turns - to be fair, I did also made an update of "HP Total Care Advisor" who has nothing and after I rebooted I could not make it work... "HP Advisor has stopped working"

  Any ideas or advice?

  replied in the other thread

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/help-svchostexe-and-problems-booting/cd6ef667-7833-4f34-B976-ffded620a208

• On turning on my laptop that I keep seeing a black screen for about 20 seconds.

  So, I got a few problems of starting time. On turning on my laptop that I keep seeing a black screen for about 20 seconds. Seeing a few forums I have seen that this should not take more than 5 seconds. I have a dell Inspiron 15 3537. Please help. "

  Hello

  Please download CCleaner here and when it is installed, open it, appointment on the 'clean' tab, leave all the boxes even and click run while cleaning.

  When you have done this, go to the 'Tools' tab, select uninstall and bottom right, select Save to text file, select a file name for it, and then open the saved document. Send the contents of it in your next reply.

  It is possible that it is caused by corrupted files. You can try to run the System File Check to check (and challenge!) corrupted files.

  Use the System File Checker tool to repair missing or corrupted system files.
  https://support.Microsoft.com/kb/929833?WA=wsignin1.0

  You can also have a third-party application installed on your computer that is the cause, so try to perform a clean boot Mode, which is executed at Windows startup, by using a minimal set of drivers and startup programs.

  How to make a Windows-specific Startup Mode.
  http://support.Microsoft.com/kb/929135

  It is also advisable to run a scan with Malwarebytes Anti-Malware to check all infections.

  Thank you.

• Why show black screen for some of my users with a view to the horizon?

  Hello

  I installed horizon view 6.0. now, I just have a problem sometimes some of my users connect to their desktop with vmware view client horizon just see a black screen and cannot do everything even when I'm this office openconsole in vsphere client no show and a black screen for solve the problem I have to restart this desktop computer and its not ok how can I prevent black screen

  now I see that my status of vmware tools was obsolete is so important?

  What di I do?

  Best regards

  Babak

  As often occurs when the wrong VGA driver is installed.  This occurs when the view Agent is installed on the desktop, and then the VMware Tools is updated after the fact.  The result is the driver included with the Agent to view VGA is replaced with the VGA driver in VMware Tools.  You can see some advantages to the relocation of the Agent of the view, or update the VMware Tools and then install the Agent from the view.

• YouTube load black screen for the first five seconds

  As of the beginning of January 2013 in Firefox, videos YouTube are responsible as empty black screens for the first five seconds. 0:06 mark, video begin to play normally. This isn't a problem in Chrome or IE. Tested with all plug-ins and Add-ons disabled (except Flash player). Plug-ins/add-ons custom updated. Tried to reinstall Firefox without solution. Help? Thank you!

  You can check the problems caused by the recent updates of Flash and try these:

  • disable an eventual extension of the browser for Firefox Plugin RealPlayer Record and if installed RealPlayer update
  • disable the safe_mode in Flash 11.3 and later versions
  • turn off hardware acceleration in the Flash plugin
  • http://KB.mozillazine.org/Flash#troubleshooting

• I get a black screen saying 'OS install mode' when I start my computer

  Original title: The OS Install Mode
  When I turn on my pc, before starting, I get a black screen saying "os install mode. So, I have to pressing f1 so he can begin upward. Then, it takes 10 to 15 minutes to start. How can I change so that I don't have to make that choice. I read that it is in the BIOS but I don't know what that means. It is a XP system.
  Thank you!!
  Hello
   
  1. What is the number of brand and model of your machine?
   
  I suggest you see the computer user's manual or contact your OEM (Original Equipment Manufacturer) for a better support.
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Pavilion dv7-6c75eo: 10 start Windows (black screen for about 1 min.)

  Windows 7 (System. org) was running fast and good.

  Updated to 10 and after a few reboots, it has been installed and working.

  whenever I start cold blue windows logo appears and the device goes into screen black.

  It remains so for at least 1 minute and then the login screen appears. All the drivers are updated day/install.

  I tried to do a clean 10 x 64 Windows and installed well installation and rebooted.

  This time it was much faster (a few seconds) and I went into the Device Manager.

  I could see that Windows installed the drivers for various devices like the unknown devices disappeared one by one.

  Some time after (with 1 remaining peripheral unknown not related to the problem) it restarts.

  Now I'm on the black screen again whenever I restart.

  I hope that the description of this issue is understandable

  I've updated the hard drive on a disk of 120 GB and second disk SSD Intel with a disk of 1000 GB new

  Data sheet:

  CPU: i7 [email protected]

  RAM: 8 GB DDR 665 MHz (9-9-9-24)

  MB: HP 1803

  Graphics card: Intel HD Graphics 3000 + ATI Radeo HD 6700 M

  Storage: INTEL SSDSA2CW120G3 (SSD) + Hitachi-HGST HTS541010A9E680 (SATA)

  Audio: IDT HD Audio

  Windows Pro 64-bit 10

  Temperatures: CPU: 49-51/degr. Motherboard: 51-52/degr. storage: 32 degrees.

  I hope someone can get some ideas

  PS. : I'm not a newb

  The solution is either:
  ¤ Accept the loooooong delay
  ¤ Do not upgrade for Windows 10

• HP Envy 15 notebook PC C8P47AV: black screen on laptop and also when I connect to monitor

  When I turn on my laptop I can see only a black screen.  I don't quite see the HP logo.  The hard drive seems to be spinninge I can hear the fan and the lights on the wireless and the caps lock are functional; believe so everything works well except the video.  I tried to connect to a monitor via HDMI, but you still get black screen after trying the F4 key.  There is no beep codes or the upcoming diagnostic lights.  Before I lost the video, I had taken the laptop fan because there was a message that he did not work properly.  Turned out a screw was stuck in there.  I removed the screw and replace the fan in.  Everything closed and turned on the laptop - no video.  I tried to re-seating the RAM.  Basically, I would like to see if people think it's the motherboard or the video chip that is the question; in this case, I'm going to buy a new laptop because motherboard costs about $200.  Also if anyone knows if there is a diagnosis of material that I could run that might give some beep codes.  I think that Dell has something where you hold D down and power on the phone to start the diagnostics.  Full disclosure this laptop fell a few times as well, so this problem can only await the right time appear.

  @gman2,

  Hello and thanks for the display on the HP support forums.  If you can, nothing appears on the screen or enter the bios at all this means you have a hardware problem.  You will need to contact the HP support by phone for repair at this point.

  Please use the following link to connect to the appropriate service.

  Contact HP support.

  Please let me know how things are going.  Thanks again for posting and have a great day.

• Error message: Windows could not open possibly due to a hardware or software upgrade with a black screen and white on Windows XP starts.

  Original title: suddenly Windows XP does not open

  After using the computer someday, he would not start the next time I lit. Windows tried to start but failed and went to a black and white screen saying windows could not open possibly due to a hardware or software upgrade and invites me to try opening windows normally, safe mode, using the last well-known congig, etc... Every choice has ended up doing the same thing, windows tries to start and end up back in the black and white screen.

  Hi Brian,.

  1. you receive messages or error codes?

  2. did you of recent changes on the system?

  You can read the following article and check if it helps.

  Computer stops responding with a black screen when you start Windows XP

  Black screen on startup

  Hope this information is useful.

• Windows 7 black screen with cursor (without flashing) to start in normal mode or safe. HELP PLEASE!

  Yesterday, I was using my computer and it locked up, so I turned off the power and the reboot. When I did this went to a system startup repair screen and said that no problem was detected on windows startup. However, I always get a black with a cursor screen when I try to start my computer. It does this in regular mode, course, debugging, any mode that concerns windows makes the screen just go black after the windows loading screen.

  I found many people having problems with black screen, but none seems to be identical to mine, since most people can always use safe mode. I tried to do a system restore but it says that no restore point has been set, even if I did restorations in the past by the control panel (not the computer repairman found by pressing F8 to turn on my laptop.

  My laptop is a Sony VAIO VGN NW125J, I don't have a windows recovery disk, or something like that because I got a free upgrade to Windows 7, when I bought the laptop a little over a year. Someone knows a way to solve this problem, or I'll have to give up a few hundred dollars and bring it to the Geek Squad? Thanks in advance!

  Hello

  There may be no resolution without a re-installation and you should probably get help
  a real computer store (not the leeks and the glances at a Best Buy or other stores) or the
  Support of system Maker.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Black screen for 10 seconds and then lock screen after ios 10

  I am facing a problem where my iphone 6 randomly shows a black screen with a loading circle in the Center for about 10 seconds and then wakes up to the password lock screen.

  Called in support and they mentioned to install ios 10 via itunes instead and a new device settings and do not restore the backup to diagnose the problem.

  Is anyone else having the same problem? Any suggestions that might be faster than the one mentioned by the Apple Support

  Colleague and I have this specific question. Getting really boring. The app I was on lost its place, its similar accidents are happening

• Why my dosent ml 3706 gateway laptop screen wants to turn on when started taking 3 or 4 times

  Why my gateway computer ml3706 laptop screen dosnt want to turn on when start takes 3 or 4 times to light

  Hello

   
  You have made any changes to your computer recently?
   
   
  I suggest you to follow the steps and check if it helps.
   
   
  Method 1: Disconnect all external devices except the mouse and check if that helps.
   
   
  Method 2: Start on your desktop and follow the steps in the link and check if that helps.
  Troubleshoot monitor and video card

   

   

  This could be a hardware problem, you can contact the laptop manufacturer support and check if it helps.

  http://support.gateway.com/support/ask_gateway.aspx?cmpid=supportnav

   

• Black screen showing F2 set up and start up F12 on the Vista Start menu and saying "no boot device."

  Original title: Windows Vista has stopped working

  I turn on the computer and Vista will not load.  Black screen that shows set up F2 and F12 boot menu.  Then after a few seconds it says: no boot device.   I know not if I reinstall vista with a disc, then it will be a new installation.  I lose all my files and documents?  Is it possible to recover?

  Hi Ladybel,

  You must contact the Local tech-store and check the hard disk for errors.

• black screen after the windows logo when I install my video card

  Leadtek WinFast GT 220 1024Mo DDR2 graphics card

  I compared the original image with my GT220 I bought, and me missing 1 capacitor... It's funny because it's probably the error of the factory. It only works with the drivers, if I install them it hundred boot windows7 (only win logo and black screen then)... And when I go to nvidia to scan my gpu it shows gt 330, HELP?

  I compared the original image with my GT220 I bought, and me missing 1 capacitor... It's funny because it's probably the error of the factory. It only works with the drivers, if I install them it hundred boot windows7 (only win logo and black screen then)... And when I go to nvidia to scan my gpu it shows gt 330, HELP?

  You say you have "defective" material and you want a software solution?

  Any material support - including the drivers and other software that may be necessary to enable a hardware component to operate fully in a given operating system - is the manufacturer of the equipment.  So if you have a problem with your nVidia GT220 video card - your first stop should be nVidia.

  • Assuming you have Windows 7 64 bit, the drivers you want to include.
  • Assuming you have Windows 7 32 bit, the drivers you want to include.

  -In addition, you are in the hands of nVidia.