Black screen HELP!

Similar Questions

• Pavilion MS225: all on one black screen help

  Hi, from Thursday morning, I noticed a light flickering on the screen on and off during the day, then that night, the screen went black all of a sudden, I could put in sleep mode and wake him up, things went very well after that.  I turned it off for the night and kept overnight get this screen black (I could barely see the bottom of screen and icons) but I was able to see my login page for a few seconds when wake-up mode 'sleep'.

  I went to updates and saw that the Realtek High Definition Audio Driver need updated, so I tried and failed so he can install from Windows. I could see the screen enough to get on the industrial site and uninstall and reinstall. I reinstalled graphic discs too. Now, it seems to work very well, not black screen or flashing for about 5 hours now since the update the Realtek device. I was wondering if that was the question all along, is that this driver not getting updated cause screen problems? I also installed AMD Catalyst Install Manager and it updated the drivers.

  Honestly, I don't know much about computers and it is the only one I also gives access, any help would be appricated! Thank you

  Hi there @slyn1234,

  Welcome to the Forums of HP Support!  It's a good place to find the help you need, other users, HP experts and other support staff.  I understand that your computer screen went black, and after updating the driver it works again.  I'm happy to help you with this.

  In response to your question, as to whether that was the problem, I'll give you a qualified Yes. It may be that the driver has been updated but that something has happened to the existing driver, the file has been corrupted, or another program or driver was installed that are in conflict. Another option is that a setting has been changed somewhere; There are several possibilities.

  If this kind of thing happens again, see if you can boot your system with the help of computers HP - safe mode of Windows 7. Windows safe mode will load with the base drivers and is a way to access your system, if it seems that there is a software problem. Can be modified in Mode safe as parameters to display, or drivers, or uninstalled applications that may not be easy to dismantle a normal start.

  Another useful to look at document is: HP PC - computer won't start (Windows 7). I hope this helps.

  Please let me know if it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

• The gel at the Windows logo goes to black screen HELP!

  Hello

  First when I turn on my laptop I have SMART disk error. I have been informed that the hard drive needs to be replaced, but I have also another problem is when I press on enter to continue to start. My computer freezes s to the Windows for a good few minutes, then I get a black screen and the cap lock light flashes 4 times.

  Can someone help me?

  HP Pavilion DV6-3040sa

  Windows 7 64 bit

  Before that happened, my laptop has been extremely slow and unresponsive this is why I decided to do a clean install of the operating system. My laptop was still slow and be insensitive. I have the installation could of thought was wrong somewhere so I reinstalled the operating system again, but the same problem. I installed some updates and Service pack 1. Restarted my laptop and then receive the SMART drive problem.

  Thank you

  Kin

  Replacing the hard drive means a re-installation of the operating system.  Resettlement reign essentially all software issues that may have accompanied the failure of your hard drive.  So the answer is Yes it should solve the problem.

  If you don't have recovery media please contact HP using the information provided above.  I suggest you contact instead of trying to create your own media.  As this will probably be very difficult and problematic on a failing hard drive.

• Upper half of the video is missing (black screen) - Help!

  

  I work with Adobe Premiere Pro CS6 and I installed updates. This is my first time posting and I only use CS6 for a few months so I'm still a beginner. That being said, here's my dilemma: now half video missing one superior project I worked on yesterday without any problem. I didn't have a problem before and it's the first time I'll have to deal with that. For some reason, the problem is only occurring when I use of files larger than 1 GB. When I switch to a low quality video file which is 160 MB, for example, I don't have the problem of lack the upper half of the video. I also tried export to see if the problem is corrected during the export process, but it will also be released lack the upper half of the video.

  Any help would be greatly appreciated. Thanks in advance.

  Marisela

  We had exactly the same problem in our software.  We have reduced to updates of windows under MS technology MS13-057.  Specifically, on kb2834904 XP and windows 7 kb2803821.

  For us, it happens when the decoding of WMV9 files.  Not all uses of decoding WMV are affected, but I have confirmed that when linking the WMV decode DLL to a sample for RGB32 video grabber, executives are black on top, so that points directly to the internal data of the dll to decode WMV decoding.

  You can uninstall these windows updates to fix your problem.  I hope that Adobe can join Microsoft to fix this properly as soon as possible.

• Start black screen and beeps, HELP pls

  I have a HP Pavilion zv5410. When I turn it on it has a black screen and it beeps (1-2-2). I went on some sites about, but don't really understand what is happening.

  I put the new RAM in because that I was told by a techie, it was usually the RAM goes bad, but this did not help. I can't do anything with the BIOS because I can not even a screen to enter in info, even with an external monitor.

  I was told that I could get the data on my hard drive with a hard drive enclosure kit. I bought the kit box Rocketfish 2.5 inches, but it has a different connector (for individual pins where solid mieare 'PIN' this slide down into the connector of the laptop).

  Any ideas or suggestions. I'd appreciate any help.

  Thank you all,

  K

  It worked!  I feel so stupid for not trying to see if the plastic piece came out.  Thank you much for the help!

  Karen

• I just ran the last update for my iPad and now it just continuously reboots to the black screen with the Apple Logo. Hard restarting does not help, neither do not connect the camera to MacBookPro. Any ideas?

  I just ran the last update for my iPad and now it just continuously reboots to the black screen with the Apple Logo. I left plugged in all night and still no change. Hard restarting does not help, neither do not connect the unit to aMacBookPro. When I do this, iTunes complains that it can not connect because the iPad 'expires '. Now it is disconnected, but I can't turn it off. Even close the lid will not extinguish it. Any ideas?

  Try the following. It seems yo may have to let the battery drain is completely:

  - iOS: do not respond or does not light

  -Also try DFU mode recovery mode post-test

  How to put iPod touch / iPhone in DFU "Karthik doodles."

  -If failed and that you cannot completely turn completely the iOS device, leave the battery to drain completely. After loading a hour repeat the foregoing.

  -Try a different cable

  -Try on another computer

  S ' there is still not successful that usually indicates a hardware problem and an appointment at an Apple store Genius Bar is in order.

  Shop Apple Store - Genius Bar

• Black screen with blinking cursor on HELP!

  Today, I tried turing on my laptop its a G56. and the hp logo came after that I got a black screen with a white cursor blinking. now I tried the hard reset which did not work, there is no blinking lights. I also tested the hard drive and memory and everything this past. Also I have tride f11 system recovery and does nothing just a black screen again. a friend of mine also has the same laptop right, I tried to Exchange hard drives to see maybe if it was my computer but its hard disk works fine on my comp. and then I put my hard drive into his computer and made the exact same thing, black screen with the white cursor. I don't know whats going on. PLEASE HELP ME!

  Hello

  No problem

  If you do not, use another PC to create a rescue CD Windows 7.  Download the ISO relevant among the links below.  If you are not sure of the version, the product page for your laptop shows it was delivered with the 64-bit version, so try first.

  Windows 7 32 bit

  Windows 7 64 bit

  You must use an app like ImgBurn to burn the ISO to a CD - a guide on the use of ImgBurn to write an ISO on a disc is here.  One time created, or if you already have this, insert the rescue CD in Notepad and restart at the start of it.  Select repair your computer and choose the command prompt.  When this charge, enter the following commands and press on enter after everyone – including spaces as shown.

  Bootrec.exe

  bcdedit/export C:\BCD_Backup

  c:

  Boot CD

  BCD attrib s h - r

  Ren c:\boot\bcd BCD.old

  Bootrec /RebuildBcd

  Bootrec /fixmbr

  Bootrec /fixboot

  Remove the rescue CD and try to restart the laptop.

  Let me know how it goes and if there are still errors, include them with your next post.

  Kind regards

  DP - K

• I hope someone can help.my p7-1054 has a black screen

  I hope someone can help.my p7-1054 has a black screen

  Hello

  Follow the steps listed in the link below

  http://support.HP.com/us-en/document/c01896806

• HP Pavilion G6 black screen at startup... Help!

  I have a HP pavilion G6 that has worked well for like half a year. Today I wanted to start my laptop, but it seems to be stuck on a black screen (with my slider appeared) after the HP loading screen.
  Sometimes, at the start, he says 'prepairing failback', but the results after loading at the same black screen.
  I tried to solve this problem with the following things:
  1. hard reset (turn off everything, hold the power button / stop 30 seconds, all lights and start-up etc..)
  2 replacement RAM. Someone from the Forum said it worked, but it didn't.
  3 tried to take off all USB devices such as mouse, adapter DC etc. and starts but didn't work

  I don't know if it has nothing to do with the startup problem, but a month ago I tried to do a factory reset, but my laptop seems to be stuck on the same black screen. I couldn't find a solution for this too.

  I really hope that someone can help me without sending my laptop to HP...

  Thanks in advance.

  Hello

  You are welcome

  Error code 24 characters for short drive Self Test (DST) would indicate that hard is defective and must be replaced.  This is also consistent with the question of commissioning.

  As your laptop is listed as coming with Windows 8, it should still be under warranty, so my best advice would be to contact HP and arrange for the replaced disk - if necessary, you can check the status of your warranty here.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  Kind regards

  DP - K

• 15 - d017: d017-15 update BIOS black screen at startup, Win + B keys do not help... How to unbrick?

  I try to get my 15-d017cl to start after upgrading the bios, here's what happened:

  -SSD installed to replace lack of hard drive, computer was working fine but disk was bad sectors (checked at default computer w/2nd hdd)

  -enabled Legacy support in the BIOS, so I could install w7 Pro 64-bit

  -installed w7 Pro 64 bit, no problems, started in Windows, everything works as expected

  -installed the Audio driver from the HP site for this 15-d017cl

  -site upgrade BIOS from HP for 15-d017cl, program says BIOS flash 100% then hung

  -After about 10 minutes, I repowered the black screen of the machine

  -start by pressing F10 key poster standard white text on the screen 'F10 '.... Configuration of the BIOS options, but it crashes it

  -start while now pressed the keys Win + B with or without a USB key (which has a different BIOS update) just hangs

  How do I unbrick my machine?

  I tried to download the 1.5 GB for a USB key that restores the BIOS update, but the download stops after 130-160 MB, I tried 6 times. Is HP corking downloads from their FTP server?

  Help! Any ideas will be appreciated.

  My model supports the Win + B keys to cancel the BIOS update?

  Y at - it another site where I can d/l the USB tool to roll back the update of the BIOS?

  Help!

  Hi mscir,.

  You make the W + B bad smell!

  First thing, it's that you need to load the BIOS DEFAULT settings

  You turn the computer off (if its currently turned off the coast)

  Turn it back on, then press the ESC far away so that you can access the START MENU

  Press F10, press F9 and then press F10 to save the changes and then press on enter if you are prompted.

  If the fix above does not solve your problem, then perform emergency Bios dump

  Many computers of portable HP have a BIOS for emergency recovery feature that allows to retrieve and install the latest well-known version of the BIOS from the hard drive, as long as the hard drive remains functional. This emergency recovery feature is separated from the BIOS and is designed to operate in the event of a catastrophic failure of the BIOS.

• Model Aspire 6530 Acer ZK3 HELP me please! eRecovery and black screen

  Hello world

  I'm completely out of my League, and I'm hoping that one of you can help me. The Acer Aspire 6530 had the black screen/no work so I thought I would format (option F10) to find this eRecovery is coming with a gray screen with 3 options:

  ---> Restore system to factory default

  ---> System Restore from the backup of the users

  ---> Output

  The only option highlight is out and I can't click on another option. My question is can I download the erecovery disk and put it in the computer or how can I make it work?  Something else, as someone may think, please.

  Unfortunately, we do not offer a version of eRecovery by download. You can try to reload the operating system with recovery disks, if you think there may be a problem with eRecovery. Recovery discs are available on http://store.acer.com, click eRecovery.

• Win XP virus/black screen/can't use computer: Please help!

  My system crashed after antivrus died in macafee and windows; think that there was an automatic update, that sort of USB mass device had been loaded (not by me). Initially, managed to get in line for 1 min max and I saw that Macafee caught a Trojan horse think in April. Tried to update to macafee but only got 78% then crashed. Now can't access the internet at all. When I nowtry to run in safe mode, system stops to... partition\windows\system32\drivers\Mup.sys. When I try to load normally, see "Windows XP" logo then black screen. Have a Dell Dimension 9150 and have run diagnosis: no problem, all is past. I tried partition magic and got code 1516. Tried chkdsk/f, but no joy. Help, please!

  In this situation, I would try to remove the malware as a cause of the problem.

  Start the computer in safe mode with network and download and install Malwarebytes (free version for individuals only), updated definitions and run in safe mode. Disable other security software while you do the analyses.

  http://www.Malwarebytes.org/

  Download and run SuperAntiSpyware (Free Edition)

  http://www.SUPERAntiSpyware.com/download.html

  Some malware is installing the entries of proxy server redirecting internet connections. If you encounter this problem step 2 see in the following link:

  http://www.myantispyware.com/2011/02/21/how-to-remove-Internet-Security-Essentials-virus/

• I hope someone can help me. I changed a few settings in the BIOS Setup, and now I have just a black screen. I changed the main boot to the DVD player device. is it possible to reset to original settings?

  I hope someone can help me. I changed a few settings in the BIOS Setup, and now I have just a black screen. I changed the main boot to the DVD player device.  is it possible to reset to original settings?
  I am running Windows XP

  clint341,
  Thanks for posting on the Microsoft Answers forum.  We cannot guide you more precisely by changing the BIOS settings that the BIOS settings are specific to your motherboard.  However, most (if not all) parameters of the BIOS have an option to restore the default BIOS (sometimes called "default opitimized").  It may be an option in the menu that you highlight, then press enter or it can be assigned to an F key and States at the bottom of the screen, press F? for the default settings.  I hope this helps.  If you are still not able to reset, check with the manufacturer of PC for more information about the BIOS. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• HELP, (start black screen, floppy drive 0 error of research)

  at the start, it's a black screen saying "diskette drive 0 seek failure", with the option to press F1 to continue.  I don't have a floppy drive on my pc and have no idea how that happen suddenly.

  I did and went everywhere for a solution without success.  I know it's an easy fix, but for the life of me, I don't know how.  As it is, I need to be on the pc press F1, whenever I get updates, etc.

  Please help me find the correct solution and I will be eternally grateful.  Thank you in advance.

  Your computer has a floppy inside drive?  If so, the drive has failed and should be replaced.  If not, or if you aren't sure what a floppy drive is :-) then you must go in your computer's BIOS Setup and disable the floppy drive option.  How do you and when you do this varies check so a computer at another manual support site or your computer for details online.

• I need help for Windows Vista black screen during the connection, even with the login screen removed

  Hey, I have a problem in Windows Vista:

  I've been updating / updated my graphics card and it is the graphics card, I'm updating, after a while, a black screen will appear (PITCH BLACK) and I there is no cursor and I tried Ctrl + Alt + Delete, but nothing seems to work, after I turned off my laptop, starts to load then it was the new dark night! (NO LOGIN SCREEN). Then I turned off my laptop then I constantly pressed f8, then I pressed "Computer repair" then it loads then my screen showed "Another user", then I clicked it then I had to type my ID but I have no details of connection, I pressed on enter with no connection details, but this still does not work because I had to type in my login information. I tried everything, then I went to safe mode and fact a password and changed my admin account type, then I rebooted my laptop, then I have constantly pressed f8 and pressed "Computer repair" then it loads and then my screen showed 'Another user' again... .
  
  PLEASE I NEED HELP! I WANT TO PLAY MY GAMES!

  Hello

  Follow the steps below:

   

  Method 1: Do the Startup Repair to fix the problem.

  See the following article for more information on the Startup Repair:

  Startup Repair: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

   

  Method 2: Use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows

  For instructions, see the following article:

  How to use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows

  http://support.Microsoft.com/kb/927392

  Let us know if that helps.