Black screen (non-responsive) AT100 after 2 days while on the current

Similar Questions

• Vista 64-bit Black Screen of Death, with just a mobile available slider, the system does not start in safe mode.

  My system worked properly on 25 April and then something happened and now the machine comes back with "Start menu options" but will not start in one of the listed options, modes result in the same outcome.  System also starts on the Vista CD.

  System begins to boot normally, shows the tracer Green Windows at the bottom of the screen, then the mouse pointer appears and moves but the rest of the screen remains black.

  That's it, that's all what he will do.  I checked the settings of the computer and ran the diagnostic tests available and everything seems to go fine and passes all the tests.

  I worked on my own computers for over 20 years and never been stumped before, but I must say this is a first, and I have no idea what to try to do it now.

  Help or direction is appreciated.

  original title: Vista 64-bit Black Screen of Death, with just a mobile available slider, the system does not start in safe mode.

  See if there is a way to tecover clean your data before doing a restore to conditions of factory that will wipe the drive of all.  You can use Knoppix http://www.knopper.net/knoppix/index-en.html with a good ISO as Copier: http://isorecorder.alexfeinman.com/isorecorder.htm as well as a blank CD (which you will need to do on another computer).  Starting on this disc and lla should give you enough access to the system (if you do not have any other means) to backup your important data.

  So since you seem to have no other alernatives, you can try retoring the original factory computer options. However, if it is a hardware problem as could very well be the case, you can still encounter problems after even this drastic step.  Then you will need to consider in a reputable computer repair shop (NOT Geek Squad or or a any of these big store centers) or maybe even go back to the manufacturer for repair.   Check out several options and compare the costs, quality and guaranteed and then make your best decision.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Black screen with blinking cursor after the passage in MSC mode

  I followed the recommendation to disable startup secure in the Bios then move the UEFI Bios to the CSM. But when I go to set up what I see is a black screen with a stable cursor in it. And it doesn t go in the Bios.

  The black screen remains.
  I turn off the laptop and once again now, but I still have a black screen with a cursor that is stable and that s it.

  It's like that and it doesn t go to windows even go into the Bios, I can t.
  What should I do?

  Help, please...

  Hello

  After the passage of the CSM and disabling secure boot UEFI mode, you will not be able to boot from the HARD disk as the installation of Windows 8 requires secure boot and the mode of the UEFI.

  Now you can boot from the disc or other media bootable (USB flash key) to install the Windows 7 system.

  I guess you've made these changes installed Windows 7. Right?

  By the way: what model of laptop you have exactly?

• Satellite A100-033 - black screen with no data after the advanced boot option

  I tried each F8 option in the advanced boot options to get my work laptop. There is just a black slowed after repairing Windows files and Loaded. Also F2 & F12 even when I try to use the recovery disk it remans black?
  Safe mode: nothing is displayed on the screen at all

  I noticed my mouse cursor can be seen moving around the screen, but the rest of the area is black.

  OS Windows Basic 32 bit IE9 Satellite A100-033

  Hey,.

  So if you start from the Toshiba Recovery disk you also get a black screen?

  What happens if you start from a normal Microsoft Windows disk? Just to make sure that it of hardware related problem or not

• Computer won't turn on completely (black screen with blinking cursor) after installing windows updates

  8/7, the following updates have been installed correctly:

  Microsoft .NET Framework 3.5 Service Pack 1 and the .NET Framework 3.5 Family Update (KB951847) x 86

  Update definition for Windows Defender - KB915597 (definition 1.63.1021.0)

  Following this installation, the display resolution has been reset to be very low.  When you try to reset the resolution, I was alerted to a driver problem, so tried installing this in vain (below error code)

  Intel Corporation - display - Intel (r) G33/G31 Express Chipset Family

  Error details: Code 800703E3

  After that, he went to sleep the computer, but was unable to select 'sleep' (it is grayed out) but the stop keys option indicates that the updates were ready to install so I stop thinking which may help.  It was last night.  This morning, the computer was on, seen the screen DELL, then a black screen with flashing white cursor in the upper left corner.  I tried ctrl-alt-del, got the dell screen appears again, then black screen.  I tried ctrl-alt-del, thinking I could try one of the options key F at this time, but he won't even go to this point, the dell blank screen just screen.

  Any ideas would be very appreciated!  It is the second major problem that I had recently after updates vista install (the last time I temporarily lost access to all my files, because they were placed under a temporary user account that had been created!)

  Thank you!

  Hello

  You try to borrow the Vista DVD to any of your friends and do a repair (inplace upgrade) it might help you solve the problem.

  All the best,

  Geek

• black screen at startup and after logging

  I have this problem for a few weeks.

  When I start my pc, when windows xp starts to load sometimes it appears a black screen, nothing else.
  But sometimes win xp load success and after I have connect it reappears, black screen.
  I tried to find a solution for this in google, but nothing helps, it makes me angry.
  She sucks can anyone help me on that I would appreciate it. Thank you!!!

  We need the DMP file because it contains the single record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.

  If you are overclocking STOP

  You may be able to get the DMP files without crashing by booting in SafeMode (F8) with networking.

  Please follow these instructions to collect data against crashes and upload them here, to your Skydrive or a service such as Rapidshare file sharing.

  http://www.SysNative.com/forums/showthread.php/68-blue-screen-of-death-%28BSOD%29-posting-instructions-Windows-8-7-amp-Vista?p=303&viewfull=1#post303

  http://SysNative.com/0x8/BSOD_Windows7_Vista_v2.64_jcgriff2_.exe

  To allow us to help you with symptoms BSOD on your computer, download the contents of your folder "\Windows\Minidump".

  The procedure:

  * Copy the contents of \Windows\Minidump to another location (temporary) somewhere on your machine.
  * Zip up the contents of this folder
  Please, upload to skydrive or a file sharing service and put a link to them in your next post.

  Go to start > search/run > cmd > msinfo32 and include it in the upload

  To ensure the minidumps are enabled:

  * Click Start, in the search box, type: sysdm.cpl, press ENTER.
  * On the Advanced tab, click Startup and recovery... Settings button.
  * Make sure that automatically restart is unchecked.
  * Under the writing debugging information header, select image partial memory (256 KB) in the list box drop-down (varies from 256kb).
  * Ensure to that small Dump Directory is listed as % systemroot%\Minidump.
  * OK your way out.
  * Reboot if changes have been made.

  http://www.SysNative.com/forums/showthread.php/325-BSODs-but-no-dump-files

  http://www.osronline.com/article.cfm?article=545

• Inspiron 3437 black screen on wake-up after update 8.1

  Hi guys,.

  I recently bought this dell inspiron 3437 and windows update to 8.1.

  After the update, the screen remains black if the laptop has been in mode 'sleep' for more of, say, a few minutes.

  I read that it is a common problem after update to 8.1 windows, but I have not found a solution that works for my laptop.

  Any ideas on that?

  Update: yesterday I returned to windows 8, assuming that the 8.1 caused this problem.
  However, I get a black screen on wake up again and I have to do a hard reset.

  Edit: went back to 8.1 so that I could install this driver from Intel. Why is it not a standard update or in the support section of the driver dell?
  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&DwnldID=23323&keyword=4400+graphics+driver&DownloadType=drivers&lang=eng

  Edit 2: AAARGH, who has not yet set... After a few hours of sleep he still would not wake up properly.
  So, I choose not to let my laptop to sleep, instead I leave it hibernation.

  I have changed this in the poweroptions. Just put everything to hibernate instead of sleep (so when the lid is closed, when you press the powerbutton).
  It takes a few seconds extra for the laptop to wake up (but still quite fast, less than 10 seconds), but at least the screen comes alive.

  PS. Sorry for all the dubble posts suite thisone. Assume that something went wrong yesterday.

• Re: Black screen on Satellite P300 after removing the SD card

  Hello @ community!

  I had a P-300-21Z. 1 month.
  Last time I got the shot screen SD card in black and never returned to normal...

  The PC works fine on the external screen...
  I can see what is on the computer laptop screen at the back but is almost completely black...

  My guess is it is the lamp of the screen burned!

  What do you think?

  Thank you.

  > I can see what is on the computer laptop screen at the back but is almost completely black...
  Sounds like an inverter problem.

  The FL inverter (very small part behind the screen frame) is responsible for the backlight of the screen and it controls the backlight.
  If the FL inverter will start to malfunction, then you would see everything as behind a fog of ticks, I think this is your case

  I recommend contacting ASP which would be able to help you.
  The P300 notebook is not very old, and I think the warranty to be valid.

  See you soon

• Black screen with cursor just after turning on the computer in Vista

  When I turn on my computer, it's just a black screen and the cursor. I can move the cursor autour, but I can't go any further. The same thing happens in safe mode. Help, please! :( I tried to repair vista with the installation cd, but it is no problem. I searched around the internet and many people have the same problem, but I can't find a solution to this! Please help me! :(

  Hi SiljeRypern,

  Please see the thread with a similar problem and fix possible:

  http://social.technet.Microsoft.com/forums/en-us/itprovistadesktopui/thread/06881a84-595e-40b0-96CE-87cb7a1874ef/

  I hope this helps!

• S10-3s black screen, no bootlogo - dead after four months?

  Hey,.

  Since yesterday, the doesn´t machine do a lot:

  status-leds of power, battery, and hard disc burning.

  fan blowing for a second. and that s it.

  Can hear the HDD runs, but does not.

  Black screen, no boot logo...

  External display is black, too.

  Any suggestions? I need man, the thing at school, you just bought in December!

  THX in advance.

  Could be in German as well!

  Thx for the link!

  Yes, be it a:

  'Action of symptom, in order '.

  A beep & white LCD.
  Card system. »

  Guess beep code must be valid for the s10-3s too

  Straight: Service, here come us!

  Could be * closed * here.

  THX. again, guys - not happy, but s * happens!

  

• mail does not remove the trash after 30 days selected in the preferences. Why?

  I selected emails in the trash in mail should be deleted after 30 days.  Messages in the trash are not deleted.  It started recently, after the upgrade to El Capitan.  Can someone help me?

  Same problem here. The e-mail rule--> accounts--> Expunge deleted e-mails after one day. week | month becomes active. I installed Spamsieve, but should not intervene. Someone suggested to delete the respective Mail.plists, but there is nothing else than com.apple.mail - shared.plist in ~/Library/preferences.

• black screen w/flashing (dos prompt that usually work) at the corner of L/H.

  I have a D-610 from Dell with windows XP, when I turn on the computer, the printer Dell flash screen appears and then goes to a black screen with a flashing on corner top l/h. I tried to boot into safe mode, nothing works. I ran diagnostics, no help.

  I decided to run a repair of XP Cd and restart, the same thing. The machine was working fine until my daughter it off last night. Ideas, any help would be appreciated.

  It's really a common problem.

  "Off" means using the power instead of a normal shutdown button?

  I start in the XP Recovery Console and run a chkdsk /r on the system first to make sure that the file system is not afflicted.

  Start in the XP Recovery Console is not the same as starting on any system or recovery CD which might come with your system.

  If that didn't change things, I would then run fixmbr, but since you have a Dell, which would replace the customized Dell Master Boot Record If it exists (maybe there's not a MBR custom Dell or maybe it's OK for you).

  The Master Boot Record, it's giving you a bit of your startup options and sometimes Dells have things installed on the hard drive as a bootable recovery, a diagnostic partition partition, etc. and if you run fixmbr, you lose those.

  If you run fixmbr/fixboot, which would put everything on the news of XP, and you would not be able to use the Dell boot options again.

  Maybe it's okay with you, or maybe you do not have them at all.

  But, now that you've tried to fix it, things get more complicated.

  If you have some personal data out there, you can save somewhere outside of a USB device or a place like this before continuing.  There are a variety of methods to do so.

  You could also post your question on the Dell Community and see what they have to say.

  When Support of Dell people do not know what is happening, they will usually tell you that you need to reinstall your XP from scratch, but I never do.

  The Dell company sometimes has good ideas, but they are hard to find and sometimes their "experts" seem to have ideas that are less useful than here (if possible!).

• Black screen - even in safe mode - equip vista to reinstall the cd does nothing

  can get on the internet and in word and excel documents, but total black screen except screen shortcut at the top

  Hello

  Right click on the Desktop Office - Vision - Show icons. If you move the mouse to the bottom of the screen
  the taskbar appear?

  If necessary try Safe Mode - repeatedly tap F8 as boot - try restoring the system to a point of
  before that happened.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  If you have more than one standard black screen there are other troubleshooting steps that you can
  has tried.

  =============================================================

  To use the Vista disk, you must go in the settings of configuration/F2 (BIOS/CMOS) often as you start so
  look at the screen - first set the boot on CD/DVD order. Don't forget to back off later.

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Black screen, slider, tried everything. I'm just not the whole machine or can I start replacing first things?

  Black screen, slider, posted tried EVERYTHING, I have replace it now? DVD player? Motherboard? Piece the entire computer? DVD now being not recognized in the boot sequence. I took it out and put it to ensure that it was not only dethroned. I can't use the restore without this player disc. So, now what? Would love to come back this wonderful Toshiba Satellite P205 with HD screen and Harmon Kardon speakers to use if only to be a dvd player... Thanks for any help.

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  If the DVD player does not work and you cannot start him, it may have failed completely.

  Contact Toshiba at the link above.

  See you soon. Mick Murphy - Microsoft partner

• Black screen with cursor when connecting Windows 7. Reinstall the drivers doesn't help not.

  I have a Windows 7 Pro machine that boots to a black screen with a cursor instead of the login prompt, but if I press some keys like enter and tab that I will get a few blue squares where probably windows are appearing.

  I can boot into safe mode and log in. I can then disable or uninstall the video card and the boot into normal windows. But if I install the Intel to the HD3000 integrated video drivers, the black screen will be there waiting for me when I reboot.

  I tried with and without external monitors connected.

  I tried to uninstall the drivers in the menu programs and features (also selection to completely remove the drivers), and I uninstalled them through Device Manager. I then reboot before installing the Intel drivers again. I tried the version on the site Web of Panasonic, as well as the latest version of the Intel Web site. Results have been the same every time.

  Are there left behind somewhere that I could try to remove registry keys? Perhaps a more thorough removal method? Something more creative? All ideas welcome!

  System Specs:

  Panasonic Toughbook CF53 (A)

  Windows 7 Pro 32 bit

  Intel CPU 2520 M w / HD 3000 integrated video

  4 GB OF RAM

  This system has been restored to a standard corporate image, unfortunately is no longer near factory that she'll get. System Restore will not be an option because he has never been in a working state. Startup Repair was not an option due to disk full corporate encryption that seems to make the unreadable disk at this time here. I tried but it fails and I can't find the drivers to be used in the environment of recovery for this BeCrypt Disk Encryption.

  Hi Brian,.

  According to the information that you, as you can start your computer in safe mode without problem, then the problem is probably with the supplied driver. Since the installation of the driver is causing the problem to occur, one possible cause is a driver you want to install is not compatible with the system. We suggest that you contact the manufacturer of your computer for help on installing the correct driver for your PC.

  Kind regards.