Black screen on Equium A100-306 after watching the movie on external projector

Hello!

I have a laptop Satellite A100-306 and it worked very well. Yesterday, I plugged in a spotlight and watched the movie.

Once I finished the movie I have turn it off and disconnected from the projector.
After a few hours later, I tried to change my cell phone and found that the initial screen of charges until after there is nothing on the screen.

I was able to go into the BIOS but couldn't go safe mode. I remember I used the key Fn and F5, but nothing comes so any help would be much appreciated.

While the initial charge up screen I do not think that there is a problem on the screen or the graphics card the toshiba logo at startup.

Can anyone help to know if tht is a hard drive problem maybe.

Hmm for me it seems that the display was set ONLY to an external display device (projector, screen, etc.) and, therefore, you are not capable of anything on the internal display of laptops.

I think you need to connect an external monitor or projector to this laptop second and must try to set display settings default (Mobile only)

The FN + F5 combination should help you.
As far as I know the laptop replaces the output of the screen in the following order:

* Internal display * * (CRT) screen external + internal screen * * (CRT) external display only * TV (s-video output) + internal screen * TV only (output s-video) *.

So maybe you have chosen the last device (output only s-video)

Tags: Toshiba

Similar Questions

  • Freeze screen for Satellite Pro P300 while watching the movie

    My Satellite P300 keeps freezing when I am watching videos.
    Can't even watch you tube gently or activity without intermittent freezing.

    Any help on this?

    Hello

    Do you mean the portable computer system freezes or just the movie?
    You need to restart the laptop then?

    This happens with all files film or just watching videos on the internet?
    Do you use the OS preinstalled Toshiba or did you install your own system?

  • Equium A100-306: screen black TV

    Hello I was wondering if someone could help me, I have a laptop Equium A100 306 and I want to plug into my tv to watch movies that are stored on it.

    It has a SVHS socket on the side and I bought a svhs cable SCART for her and when I connect it to my TV the picture is black and white. Does anyone know how to remedy this? Any help would be greatly appreciated.

    Thank you.

    Have you tested with different channels? I have my reserved channels connect TV SCART. Also check the settings on the television. Maybe you have an option to get the color.

  • Black screen on Equium P200D blocking

    I bought an Equium P200D about two weeks ago and it keep "black screening" on me. Without warning, it would be empty screen, no mouse, the keyboard is unresponsive, caps lock, shift etc. is more changed their lights. Click briefly on the power switch, it wasn't in mode 'sleep'. The only solution I found was to hold down the power button, then restart.

    I myself am sick of this problem so I reinstalled Vista. After the long list of SP1 updates and an update of the video driver, it stays black screened. So I tried upgrading the BIOS. So far so good. No more black screens. Two days running this laptop is not black projected onto me.

    Note there is another black screen blocking out there - but it is not the same. In the other, you get a mouse and can use CTRL-ALT-DELETE to get a task manager and run explorer.exe to recover. This black screen, I found usually happened after the system went to bed or while you are using.

    Pete

    Thanks for this message from Pete.
    I noticed the empty screen after wake up form hibernation on Vista laptop too.
    As you update the BIOS solve this problem successfully.

    This thread might be useful for other users who noticed the very strange behavior.

    Ciao

  • Equium A100 - 306 PSAABE - cannot start and the error of the BIOS

    I have a Toshiba Equium A100-306, which does not go beyond the BIOS screen. Last thing I did was delete the second partition on the hard drive and the boot configuration Winodws via DVD. Then he stopped display

    If I hit ESC on the post screen, I get a screen that says this: http://i57.photobucket.com/albums/g232/Medabot_Metabee/BIOS_ERR.jpg

    Ive read that theres a method of emergency crisis of flashing, is possible to run it on this laptop?

    Thank you

    Hello

    This looks like a malfunction of the motherboard, you can enter in the setup of the BIOS for example? If Yes, load default settings then save & exit it.

    If you can t get into BIOS try remove the battery and the AC adapter at least an hour. Then connect the two again and try to start your laptop.

    He starts correctly now?

  • Compatibility screen through Equium A100 series

    Hi all

    I have a Toshiba Equium A100 027, the screen which has developed a few lines. It has never bothered me much, but the opportunity has presented itself to replace. I came across a screen shot an Equium A100 * 147 * for sale and was wondering if it will work in my machine.

    Resolution and size are the same, the only difference I see is that the screen of the 147 is variety "TruBrite.

    Can someone tell me if it works in my model 027?

    Thank you
    Calps

    Hello

    I think you can use Equium A100 147 display on the satellite A100-027
    The size and connectors should be the same

  • How to connect Equium A100-306 to HDTV?

    Hello

    I was wondering if it was possible to connect my Equium A100-306 to my HDTV using a VGA cable component? The laptop has the chipset intel 945g.

    Thank you.

    Hello

    You cannot convert only a RGB (VGA) signal to component (Y-Pr-Pb), since you will need a converter that transforms the signal vga to this component.

    Which means that you also a converter for cable that could be very expensive. But if you've got components that you should be able to display an image on a device that has entry components. Don t think you will be able to run the HD-ready or full HD on a HD TV, since a HD signal requires an HD port on your computer and a disk hard taking supported system with better graphics chip and then a chipset intel.

    Welcome them

  • Equium A100 - 306 Question on upgrade Vista ModusLink

    Hello

    I bought an Equium A100-306 in November before deploying operations that I'm in the forces and could not be updated before that.

    I just go and discovered that I can't have my Vista upgrade I missed the deadline. I ModusLink E-mail unanswered. I was wondering if anyone has any advice or that you could help me solve this problem.

    I think that I should not miss out on the free update due to circumstances beyond my control. Looking through the documentation I received with my laptop there was no deadline, said that it is only on the internet, the date limit is clearly but I was unable to verify this.

    Thanks for any help.
    Greg

    Hi Greg

    What to say. The overall programme is controlled by the ModusLink Corporation and any misunderstanding, you must try to clarify with them. I think that the end of March was the deadline for the Vista upgrade program.

    Sorry, but you are alone and try to talk with them about the situation as a whole.

  • Equium A100-306 with SuSE 10.1 - ACPI

    Hello

    I have an almost nine Equium A100-306 (4 months) with SuSE 10.1.

    Have you any idea where I could find the support acpi for this model?

    Thank you
    EDINA

    Hello Edina

    If you carefully read the Linux article, you will discover that Linux is not supported for operating system, but there are a few links very useful where you can find information on Linux on Toshiba laptops.

    I'm not fan of Linux and unfortunately not help you but before you wait here to find answers please check can track the pages:

    http://Linux.Toshiba-DME.co.jp/Linux/index.htm
    http://www.Linux-on-laptops.com/
    http://newsletter.toshiba-tro.de/main/index.html

    Good luck!

  • Serious problem with driver i810 Equium A100-306

    I have a new Equium A100-306 and I try to install two different Linux distributions:
    10.1 (x86_64) SUSE and BlueWhite64, but in both cases, I met the same problem:
    When you restart the Xserver, the computer stops responding.

    I used the i810.
    This is not the case with the vesa driver.

    lspci reports:
    00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS/940GML and 945GT Express Memory Controller Hub (rev 03)
    00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS/940GML Express Integrated Graphics Controller (rev 03)
    View 00:02.1 controller: Intel Corporation Mobile 945GM/GMS/940GML Express Integrated Graphics Controller (rev 03)

    Hello flora

    Before you wait here for a long time trial learn more about Toshiba Linux pages:
    http://www.Linux-laptop.NET/Toshiba.html
    http://Linux.Toshiba-DME.co.jp/Linux/index.htm
    http://newsletter.toshiba-tro.de/main/index.html

    Good luck!

  • Cannot install updates Office on Equium A100-306

    Cannot do the following updates on my laptop Equium A100-306

    Update for Office 2003 (KB919029)
    Update for Office 2003 (KB920813) security
    Update for Office 2003 (KB925251)
    Update for Office 2003 (KB914455) security
    Update for Office 2003 (KB936048) security
    OneNote 2003 Service Pack 3 (SP3)
    Update of security for Microsoft Office 2003 (KB921598)
    Update for Office 2003 (KB954478) security
    Update of security for Microsoft Office 2003 (KB953404)

    What you mean with this? You get an error message? The laptop did a restart?
    Then please give us a little more information.

    I don't know but maybe that updates are already in Office 2003 SP3 Mr. check the!
    Maybe it of enough if you install the last SP for Office visit the Microsoft Web site to download this file.

  • Information about the life of the battery of Equium A100-306?

    Hello!
    I have a Toshiba Equium A100-306 & am pleased with it.
    Of course, I want to protect my investment & having been, in the past, concerned about battery 'memory', I was happy to find that this machine works with a battery lithium-ion - & everywhere I look I see words to the effect that:

    "There is no memory and no regular bike not needed to extend the life of the battery.

    I also found: a lithium-ion battery provides 300-500 charge/discharge cycles. The battery prefers a partial rather than complete discharge. Frequent full discharges should be avoided when possible. Instead, charge the battery more often or use a larger battery. There is no memory problem when unexpected expenses. »

    Except, that is, Toshiba (citing the manual) say: "at least once a month, run the computer on battery power until the battery is completely discharged, then discharge the battery."
    Then, they suggest "once a week" to ensure maximum capacity.
    You will understand why I am confused? I would really appreciate someone stating the above.
    Thanks for your time. Cheers, Peter.

    Hello

    Perhaps they have not properly updated their textbooks? I Don t know, but is the only thing I can tell you, that new technologies in mobile systems such as yours are very modern and I think toshiba had a cool technology into their machines, so that systems of remain "without worry".

    I suggest you read this article on the type battery that is in your machine so that you can understand the best technology:

    http://en.Wikipedia.org/wiki/Lithium_ion

    Hope I could give you an idea...

    Welcome them

  • Black screen when viewing of DTV, can hear the program, but no image.

    original title; Windows XP Media Center Edition 2005 - black screen when viewing of DTV, can hear the program, but no image.

    When I set up my Windows XP Media Center Edition PC to view DTV, I used the Setup etc., XP scanned and found all the available DTT channels. I thought as much, worked for BBC1, BBC2, worked, then I went to view ITV1 and other channels, could hear the noise perfectly, but there is no picture, just a black background. He used to work because I previously installed the computer. However, wouldn't be a difference that the TV signal will of the antenna, in a block of TNT, and then in the computer, there always used to work. I have that, it is not a signal problem because I could watch the TNT cable SCART on the computer and the image and the sound is fine just using the freeview box. It seems to be the Media Center. Please can someone help me? Thank you

    Apparently, this was caused by an outdated ATI graphics card driver. I recommend upgrading your graphics card driver to resolve this issue. Should work fine then

  • My Apple TV is making black screen that flickers sometimes snow or in the menu that I delivered on pressing on menu & down and disconnect what do I do now?

    My Apple TV is making black screen that flickers sometimes snow or in the menu that I delivered on pressing on menu & down and disconnect what do I do now?

    Read this:

    Get help with audio, video, or power on Apple TV - Apple Support

  • My Windows Vista computer displays a black screen with only a white arrow to the mouse cursor.

    I have a black screen with only a white arrow to the mouse cursor.  I tried to start in safe mode, safe mode with networking, and safe mode in the command prompt. Each time, I just get a black screen with a white arrow cursor.  How can I get my screen back?

    original title: black screen

    Hello

    Remember to make changes to the computer before the show?

    Try the following methods and check the status of the issue.

    Method 1:

    Disconnect an external device connected to the computer with the exception of the keyboard and mouse and check if it helps.

    Method 2:

    If you have the Windows Vista disc, the computer by using the startup disk and perform the Startup Repair. See the following links:

    What are the system recovery options in Windows Vista?

    http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

    Make repairs to the system from the Windows recovery environment.

    http://Windows.Microsoft.com/en-us/Windows-Vista/make-system-repairs-from-the-Windows-recovery-environment-from-Windows-Vista-inside-out

    Method 3:

    If the method above does not solve the problem, then try to perform a restore of the system from the Windows Recovery Console. You can see the link provided in method 2.

Maybe you are looking for

  • Firefox does not start, the Profile Manager is not available

    Firefox worked, then update it does not start. I tried all the fixes; However, the Profile Manager is not accessible or even present in the execution file. I unintalled and reinstalled several times, but I still can't get it to work. There is no Wind

  • Tecra 9000: How to remove the inverter cables?

    HelloI have a question. Maybe can someone help?I'm trying to remove the inverter. The cables that go from the inverter to the main Board are easy to remove. (This is a connector). But I can't remove the cables that go to the LCD inverter. Is this als

  • HPEnvy4500: Printer wifi

    My printer do not connect to the wi fi on my new Telstra 5 GHz network. Why? it connected ok to my previous 2.4 GHz

  • Reference Dell next Business Day Support Provider Uny

    Hello Is the above information for the serial number of my laptop, does anyone know wat information is on about? Is - this international warranty? Who is UNY? How to change the program of UNV to dell? guaranteed upgrade price Dell? volunteers from th

  • Option 82 and ip-helper

    I use ip assistance to forward the DHCP broadcasts of all of my VLAN to the 2012 Microsoft dhcp server. In my switch CCNP training, recently, I came across option 82 and wishes to state his destination. Is option 82 and assistance the same ip? I unde