black screen still not fixed

I have a HP Mini 210 t - 1100 that I bought in late 2010. When my computer tries to start, he returns with a black screen. The Caps lockbutton lights up, and it seems that the fan turns on, but nothing else. I tried the hard reset and the problem still persists. I don't have an external monitor I can connect to. There is no way I see for me to take on the back of the laptop to watch hard drives and that which does not. I tried to do the test using HP PC Hardware Diagnostics UEFI and I press the F2 key, with and without e fn key, press once per second for a minute and he pulls the top no screen at all. Even with th F8 and F11 key. In addition, my computer lacks a CD player, nor do I have the disks.

I moved and it took for office depot. Screen is not at all connect to a monitor. We determined that it was a problem with the motherboard and I bought a new computer. Thanks for your help.

Tags: Notebooks

Similar Questions

  • R51 has black screen - does not start

    This question has been taken before, but I think I may have a unique situation.

    My R51 worked perfectly and was maintained during the 8 years that he was with me. I wanted to update my RAM and downloaded the update to the BIOS and chipset drivers updates.

    After that the tension I pulled the old 256 MB RAM sets under the keyboard and the bottom of the machine. Then I inserted the only 2 GB of RAM into its slot under the keyboard and reassembled it.

    Black screen / no start

    Went out the 2 GB replaced sets of 256 MB and it worked fine for a few hours that I looked for reasons why the 2 GB would not work.

    ' Sudenly the screen goes black and the closed system.

    It will supply (battery light / light green status), but the screen is black and it does not start. The fan is running and the battery costs.

    I tried hitting F12 and F8 but nothing.

    Then, I stored it down and pulled the chip near the connector of the screen and replaced by a spare part I had in hand... still nothing.

    From the CPU and replaced by another I had on hand - nothing new.

    I put all the oringinal gear back in place and tried to put pressure on the Board of Directors for the boot but still nothing.

    Help, please! I'm not very tech savvy but as you can see I'm not afraid to try.

    Thank you

    Thanks George!

    I was able to get the other 51 R spare parts and does the job!

    Send this message to him now.

    I want to send my thanks to all on this forum. It was the first time ever, I cracked the case on a laptop. Thanks to posts in these forums, I had confidence and information to see the job through.

    I have more no fear an attempt to repairs on the Thinkpad.

  • Satellite P305-S8820 won't start no-POST 'BLACK SCREEN' will not start up CD

    When the HARD drive is connected Vista does not start, regardless of the boot order. Instead, it shows just a black screen with no cursor. Supplied recovery disks will not start. I removed the HARD drive and ran a scan of the disc to see if the drive went wrong, no dice, the disc is good and works fine via usb-sata on another computer.

    I inserted just the toshiba recovery disk, without HARD drive, and it starts. I connected the external HARD drive now and vista tries to start BSOD, I tried safe mode, last known, everything, nothing works, all get a BSOD disappearing too fast for me to read.

    I searched a dump file on my other computer and was a failure. When the HARD drive is connected via usb vista tries to start and the toshiba cd works now, however, it will not perform a complete installation of factory toshiba it does not find the HARD drive? I'm a windows user and I have years of experience with x 86 programming and windows 32-bit operating systems, but I'm stumped. Bad RAM? Bad Sata? Bad HARD drive? Bad CD/DVD? It is Vista Home premium.

    I don't want to reformat and lose all my data "I AM A REAL 'IT' not a silly computer user" no offense to all the others out there but I refuse just "format and forget ' tools used invites to rebuild the BCD and this does not work either and automatic repair does nothing, recovery does not work as it says there is no recovery points I am frustrated beyond words.

    Finally, this operating system is just horrible, I was once the 'happy' owner of a copy of Windows ME and it does not give me half of the problems that makes this operating system.

    I'm fed up with this, and am half tempted to ask my money for my computer, it might not be the responsibility of the user barely shoot / resolve these problems, they should be addressed before the product was released.

    I am at a loss. Help, please.

    Thank you

    Kevin

    I'm a bit confused with the info given, but if you can not restore/repair Windows, while you should do is back up your data to another PC using a USB adapter, and then run the recovery on the HARD drive internal in the P305.

    You must also update the BIOS.

  • Start PC laptop Toshiba in safe mode, only displays black screen, will not respond to any commands.

    Hello, I recently tried to do an advanced start safemode, because when I tried to do safe mode by pressing F8 it would have not responded to the command. Then I did a MSconfig, lit manually in safe mode, so I can then restart and do a scan to search for viruses or hackers of air because he had a reason to suspect. Now, after the manual switch, when I rebooted all I get is a black screen. No logo, nothing. When I press the buttons for the controls at first upward, it beeps at me and that's it.

    Done, I have XP, not Vista, don't know if it makes much difference or not, but that's exactly what I did.

    Is went to start, click Run, type msconfig, went to the utility system configuration, general tab selected, then the system of services. Then selected drivers devices of loading at startup Safemode-minimal database, and then click OK. Then, the computer said I had to be logged as administrator for these changes to take place and to connect and make changes. I was already logged as admin. so I advanced and restarted the computer and that's when I got black screen, no splash screen, no logo, no cursor.

    I just read that I could have possibly messed up by not checking the VGA mode in order to be able to communicate in this mode, I don't know if it is correct or not.

    I have my recovery discs, I've tried this morning, following their directions and it will not respond to one of these orders either.

    I don't understand, why... it was working fine before I did it, but like I said I suspected a virus or a hijacker, but my Norton 360 and SuperSpyware nothing not detected in normal mode. That's why I tried to safe mode.

    Here is the vista forums

    Try the forums xp on the link below

    http://answers.Microsoft.com/en-us/Windows/default.aspx#tab=4

    Answers by topic

    Walter, the time zone traveller

  • Pavilion 13 x 360 p: convertible laptop black screen, does not start!

    I can't turn on my computer the power button lights up and I can hear the fans and then I get the hp screen and black screen. I read the forum of other messages on out of batteries and other components of the laptop, but since mine is 2 in 1 not sure how. Have had the phone since December, should be doing this already. Any help would be greatly appreciated!

    Watch the following video. Try the method described for the Envy x 2 laptop

  • black screen says "not found operating system"

    If one day my laptop just has frozen and then off, so I turned it back on again and it came with a black screen, says "OS not found"

    Since then, I've gathered that I need to reinstall windows on my laptop which is an acer, I have a device I plug into my laptop that I can put the discs in, and I have a disk for windows, but how do I actually install windows on my laptop?

    Former title: help me!

    Hello

    Here are the instructions Acer for recovery to factory settings, new condition.

    Select Windows 8/8.1 there.

    "Using Acer eRecovery application to restore your system or to create a recovery media.

    http://Acer.custhelp.com/app/answers/detail/A_ID/29934/~/use-Acer-eRecovery-application-to-restore-your-system-or-create-recovery-media

    ___________________________________________________

    Or download the ISO of Windows 8.1 and do your own installation media.

    'Create the installation media for Windows 8.1 '.

    http://Windows.Microsoft.com/en-us/Windows-8/create-reset-refresh-media

    See you soon.

  • Status: 0xc0000411. File: \hiberfil.sys black screen - does not start. Help?

    Vista 64-bit.  Currents of the MS. updates  HP Pavilion 9830: beep long two short beeps.  Help is appreciated.

    Hello

    "beep" codes are usually a sign of hardware failure

    Here is information on the beep codes and their meanings

    you need to find your computer manufacturer what Bios you have in your computer

    http://www.computerhope.com/beep.htm

    http://www.pantherproducts.co.UK/articles/motherboard/BIOSbeep.shtml

    If you can not fix it:

    If under warranty, contact the manufacturer of your computer

    If it is under warranty, contact a local and trusted computer repair workshop, not a franchise chain store configuration

  • Out of WiFi, still not fixed

    Hello Mark,

    I got my updates of the phone a few days ago who jumped on my screen and since then I am unable to use the Wifi / 4 g on my phone, still shows error

    Then I read train you and followed the steps

    @akashshrivastava

    Steps 2 and 3 do not work because you are not on the network of Sprint CDMA. What happened with the first step? Have you tried WiFi after that?

    Please put your reply in the thread above. Double locking this thread.

    Mark

    Support Forums Manager

  • HP stream 11 inches: black screen will not do anything

    I restart my laptop and having said it has restarted for 20 minutes, the screen went black. Now, the screen is black, it turns off (the power light does nothing) and it does not recognize when the charger is plugged in it please help me this is my only computer for school.

    Let the unplugged charger until the battery completely discharges then reconnect and try to start it.

  • Windows Vista: windows could not start error. is suspended from the "Microsoft Corporation" loading bar then black screen BIOS not acpi compliant

    After you have installed the driver for the zune hd, I was asked to restart my computer. After the reboot, start froze on a white screen. I've seen this before and it is usually because of some connected usb components. so I manually powered down the Tower, disconnected the cable from zune and restarted. This time a screen saying that windows could not start, "launch Startup Repair tool" was recommended. Select this habit makes the startup hang to the progress bar from Microsoft corporation, then to a completely white screen. Although strangely, once only a blue error screen appears which says that the BIOS is not acpi compatible. I can't restart with F8 to go into safe mode, "windows error recovery" still appears. "Start windows normally"produces the same results as the tool to restart launch system. " I have a drive to upgrade to windows 7 and a windows XP upgrade disk. the disc of windows 7 hangs at "starting windows" and the XP disc gives a blue screen error: stop: 0x0000007B (0xF78D2524, 0c 0000034, 0 x 00000000, 0 x 00000000)

    I think I have a BIOS problem, but I don't know how I could continue dealing with the repair. I have no success update the bios from usb flash. Any idea is appreciated.
    Update: managed to start with F8, choose to boot in safe mode and loading hangs after "load: \windows\system32\drivers\crcdisk.sys"***.
    the machine is a gateway LX6810-01 (friend motherboard)

    Hello

    1. What is the exact error message when Windows Vista does not start?

    2. you have the disk Installation of Windows Vista operating system?

    I suggest you change the mode of RAMA to IDE in the BIOS. You can contact the PC manufacturer for assistance.

    Note: BIOS change / oxide of additional metal (CMOS) semiconductor parameters incorrectly can causeserious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

     

    In addition, perform a check disk in Windows Recovery Mode.

    (a) Insert the Windows Vista installation disc in the disc drive, and then start the computer.

    (b) press a key when the message "Press any key to boot from CD or DVD".

    (c) select a language, an hour and the currencyand a keyboard or an input method, and then click Next.

    (d) click on check drive for errors.

    (e) in the System Recovery Options dialog box, select the drive of your Windows installation and click Next

    (f) to the System Recovery Options dialog box, click on check Drive for errors.

    (g) use the switch/r to run the disk check.

    Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost

     

    It will be useful.

  • Re: Satellite L450D-113 - black screen, does not start

    Laptop will not start. Power led lights up. Fan turns for a few seconds then stops, once again spins and stop.
    HARD disk rotates.

    No presentation of the screen. Nothing appears on the AC voltage ordinary.when his shown as a green light.
    I checked...
    1. open bettery and put it again after 5 min. (result: nothing comes)
    2. open bettery and direct what AC does not rise no matter what?
    3. open the hard drive and put it again after 10 min (result: Noting happens to display) also change hard drive.

    Please tell me wht to do now?

    On this virtual path, it is not easy to say what the problem is here.
    Did you do something that might be responsible for this? Something like the update of the BIOS?

    If I understand you well portable stays all the TIME and everything is as usual, but there is nothing on the screen. Try to connect the external display on your machine and check if something will be displayed on the external screen.

    Please test first and send feedback.

  • Satellite L450D-113 - black screen, does not start

    Laptop will not start. Power led lights up. Fan turns for a few seconds then stops. HARD disk rotates. No display. No JOB.
    Scratches it down. Nothing appears out of the ordinary.
    Searched the web. This seems to be a common problem with Toshiba laptops.
    Common fix is supposed to be the power button that is held for a minute or two with battery. This does not work in this case.
    I would rather not throw the laptop in the bin...

    Any ideas before doing the Act, would be greatly appreciated.

    Skips

    Something like this can happen on any laptop so there is nothing directly with Toshiba or any other laptop manufacturer.
    Sometimes this kind of behavior can occur after unsuccessfully BIOS updated. Have you can be made to update the BIOS or anything that may be responsible for this?

    I can't say for sure, but somehow I think the BIOS is screwed.

  • Black screen, does not start in safe mode - how do I restart my mac

    Hello, I have a MacbookPro, that all of a sudden will not start. I believe that the problem - from what I've read-, is that memory is simply too fulll. I tried to start in Safe Mode, but of course it doen't work. The screen displays a small bar as it loads, but after a while goes back to the same blank screen and nothing happens. I tried waiting half an hour, but nothing changes. I have not tried to launch utility disk in Recovey Mode because I'm afraid of what will happen to my files. Unfortunately, I unwisely postponed to back up files and now I'm afraid to do anything that my fry them all without me even realizing it. Can you offer any solution that is as safe as possible?  I don't have a cable Thunderbolt.

    Thank you

    If you think that the MBP storage is full and not allowing you to start, try the target disk mode:

    https://support.Apple.com/en-us/HT201462

    Ciao.

  • iCloud iOS 9.2 backup still not fixed!

    So I was prey to the backup could not be completed problem and waited for Apple to get a fix and I was happy to see this problem mentioned as one of the bugs addressed in iOS 9.2, BUT she was not really fixed!

    Now my phone is not backed up at all after all the geniuses of Apple has informed I have delete older backups to iCould and try again, my MacBook storage is too small to carry my 128 GB iPhone backup and now if my phone dies for some reason, my life went with it, and well more than she!

    I tried save my iPhone to external storage, but Apple won't let you do that cause us are freaking slaves and not free to do what we want, so now that I hope that they would finally listen and solve this problem which has already been mentioned several times!

    I've been through exactly the same thing. Have tried to reset network settings, off iCloud signing out and to iCloud, soft reset, change what's sustained upward and recently before 9.2 erase the old backup.  Now I'm in the same situation have iPhone 6 more 9.2 128 GB with no backup icloud saying could not finish and last backup ever!  I have not managed to get a backup of my iMac, but really really wanted to do a reset factory and restore unless I'm sure that it will solve the problem.

    Apple please help.  You have acknowledged the problem, but apparently the attempt to remedy with 9.2 didn't work.

  • Update error: U44M1I210 - August 2015 still not fixed

    Update error: U44M1I210

    I'm sure that the people who had (have) this question will be frustrated crazy as I am.  I have exactly the same issue on not a Mac, but THREE!  I read all the suggestions and corrections, but responses varied greatly, I can't make sense of it all.

    I hope that for once and for all solution to this error.

    Not just a quick pointing to the links of the so-called corrections and solutions because they simply do not work.

    I fought with this bloody problem for almost 2 months now.

    Some applications I have downloaded about 10 times... still no go.

    I want to expensive sky someone could give an appropriate response to this problem.

    What are the causes?  It is the operating system?  What is an Adobe problem?  Or is the climate?

    Very sad indeed!

    Hello

    Please see the thread below where this issue has been addressed:

    Update failed. Impossible to extract the downloaded files. (U44M11210)

    I hope this helps.

    Kind regards

    Vivet

Maybe you are looking for

  • Drive necessary recovery for Qosmio G20-127

    Hello I would ask, can someone help my, I lost my recovery disc (Qosmio G20 - 127 Xp MCE) and can't download via serial on toshiba.com said that the old model. I put t know what to do. Thanks in advance :)

  • HP Pavilion DV6 6c65ed: HP Pavilion DV6 6c65ed does not turn on

    Hey I have a HP laptop since 2012. A few days ago I turned on him and it freezes. IK it turned on again and after a few minutes, it is suddenly turned off. After that when I hit the power button some lights burnt, but nothing happened. When I plugged

  • No sound of Compaq Presario v5000 laptop

    [1] - after you install several drivers using Driver Detective PC Drivers HeadQuarters, I have no sound at all! The latest driver I installed was Conexant AC - Link Audio. [2] - I can't go even to a previous Restore Point because I get the message "r

  • What is needed to use the Turbo C in windows XP Professional?

    I really need to know the requirements to install and use Turbo C in my Windows XP Professional.ASAP please.

  • Windows 10 Upgrade Wizard again.

    I downloaded Windows 10 Upgrade Assistant to upgrade my Windows 7 Ultimate for Windows 10 , then I opened it. Said treatment plant "congratulations, your PC is compatible.". I started to download it, it took me a few hours then it has finished downlo