Black screen when viewing of DTV, can hear the program, but no image.

original title; Windows XP Media Center Edition 2005 - black screen when viewing of DTV, can hear the program, but no image.

When I set up my Windows XP Media Center Edition PC to view DTV, I used the Setup etc., XP scanned and found all the available DTT channels. I thought as much, worked for BBC1, BBC2, worked, then I went to view ITV1 and other channels, could hear the noise perfectly, but there is no picture, just a black background. He used to work because I previously installed the computer. However, wouldn't be a difference that the TV signal will of the antenna, in a block of TNT, and then in the computer, there always used to work. I have that, it is not a signal problem because I could watch the TNT cable SCART on the computer and the image and the sound is fine just using the freeview box. It seems to be the Media Center. Please can someone help me? Thank you

Apparently, this was caused by an outdated ATI graphics card driver. I recommend upgrading your graphics card driver to resolve this issue. Should work fine then

Tags: Windows

Similar Questions

  • When in Skype, I can hear the other party but they cannot hear me?

    We both mutually see which is very good and they come loud and clear... but they don't heard me not at all.

    Hi Gayle,

    Thanks for posting your question in the microsoft community.

    I understand that if you can hear the other party but they cannot hear you.

    The question is limited to Skype?

    I suggest that you contact the Skype support, that they would be better suited to help this issue. Check out the link and ask the question.

    https://support.Skype.com/

  • I can hear the sound but no pictures on some internet news sites.

    Hello everyone, I have a Windows 7 64 - bit laptop computer. I hear the sound but no pictures. Why is this? Thank you. Ldxrunner.

    Hello everyone, I have renstalled VLC 32 - bit version, as suggested by the VLC Forum. Thank you. Ldxrunner

  • Hi I bought Acrobat Pro a few years ago. now, I spent from the pc to the mac, but can't seem to reinstall Acrobat Pro. Can download the program, but the serial number is not recognized. Can I still use my Acrobat Pro purchased on my mac?

    Hi I bought Acrobat Pro for my pc a few years ago. now, I spent from the pc to the mac, but can't seem to reinstall Acrobat Pro. Managed to download the program, but the serial number is not recognized. Can I still use my Acrobat Pro purchased on my mac?

    probably not.

    you need a platform swap (Exchange a product Adobe of a different version of the language or platform) but which is only supported for the latest versions of adobe.

    You can get the upgrade pricing and exchange platforms, or use an abonnemement DC acrobat and use on both platforms.

  • Can hear the movie but not see!

    Hi can anyone help, my brother has copied a movie to disc for me, when I open it with media player I can hear it but not see it. could be me being dim! any help is appreciated!

    Hi, thanks a lot for your help. My friend told me it may have been a MP4 file to download vlc player, I did and it has worked on this. My brother has copied the disc for me so I don't know what it allows to copy the disc or what format it was, Im not very technically aware! : s but it works now so woop! Thank you guys

  • G56-127nr, do not start, I can hear the motor, but I have a black screen

    I've tried the hard reset test, it did not work... my caps lock flashes also once every three or four seconds... Please help

    bumbleebee wrote:

    I've tried the hard reset test, it did not work... my caps lock flashes also once every three or four seconds... Please help

    According to the guide for your laptop computer, the processor is not functional.  It is most likely will have to be repaired, but before that, you can try reseating the RAM/hard.

    Follow the instructions for reinstalling the RAM here: http://support.hp.com/us-en/document/c01732674

  • When you use windows media player, I can hear the sound but the picture is just a black square in a green square. How can I see the picture?

    Equipped with Vista

    Hello

     
    I suggest that you check if there are codecs appropriate to run the file.
     
  • I can hear the sound but video while playing with Windows Media Player

    Original title: no video

    Hello

    Currently in Windows Media Player, VLC and GoPro Cineform when I play video I get sound, but no video.  Just a white screen.

    I tried a variety of formats, MP4, WMV, and AVI.  I even tried to play the video that I have seen and edited on this machine in the latest with no joy.  Windows is completely up to date.

    Running Windows 7 64 bit.
    8 GB RAM
    AMD 4400 M with Radeon graphics card A6

    Thank you guys

    Updated my drivers and the job done.  Thanks for the help.

  • Why can I can hear the sound but can't see the image? First Question CC Pro

    Resolved:

    I went from my GTX680 353.62 at 358.87 driver and that fixed it!

  • When I try to go full screen-all while watching a video or the program, the screen becomes all white

    While watching a video and I click on full screen my screen turns white - I can still hear the program, but no image... Please make suggestions in terms that even a 3 years could understand - this is my level of ability of the computer... Thank you.. .JB

    This has happened

    Each time Firefox opened

    == looking extreme Insider glennbeck about 10 months ago

  • Black screen when loading apps on the device Dev Alpha

    Dear all,

    can someone give me advice on the question? (I have found no similar post, so please forgive me if duplicate messages...)

    My configuration:

    -Alpha OS Dev device: 10.0.4.197

    -SDK Webworks 1.0.2.9

    I always get a black screen when I deploy & launch applications for the test (I use a debugging token)... I'm afraid that I may have problems of compatibility between the version of the OS and SDK Webworks... I'm about to upgrade the unit right now, but if anyone else has experienced the same problems, please let me know! Any help is very appreciated!

    Moreover, the two training simulators & VMWare work very well...

    Thank you very much

    -marco

    Hi Marco,.

    Could you let me know if the update of device solves your problem?  If this isn't the case, you are able to provide example code, and I can test on my end?

  • Custom surface Kaplan video plays, but I can hear the sound... Help

    I have the original Surface that is out and it has the latest updates. I have Kaplan videos I watch. To play the videos screen and I can hear the video, but I can't see the videos. I assured that my shockwave player and all that much good has been activated but still does not properly. I bought the surface because I thought it would be easier to study with her and watch my kaplan videos wherever I am at since his lighter to a laptop, but it turned out to be completely unnecessary. Help

    Hello

    Make sure that you install all updates through Windows Update.

    Perform the steps in the article, and the check.

    Flash drive problems | Windows 8

    http://helpx.Adobe.com/Flash-Player/KB/Flash-Player-issues-Windows-8.html

    Note: You can obtain updates only through the Windows Update mechanism.

    If the problem persists, you can perform the procedure described here.

    Why the videos will not play in Internet Explorer?

    http://Windows.Microsoft.com/en-AU/Internet-Explorer/videos-Don ' t work #ie = ie-11

    Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

    Hope this information helps. Response with status so that we can help you.

  • I turn on my i mac I can hear it from, but remains a black screen

    I turn on my i mac I can hear it from, but remains a black screen

    Try the help in this article to support > on the screens you see when you start your Mac - Apple support

  • When I have videos on my calendar, they do not play in the screen of the monitor. I hear the audio but can't see the image. To test if my new files are somehow the problem, I went back and used video files that I have used successfully a year ago and th

    When I have videos on my calendar, they do not play in the screen of the monitor. I hear the audio but can't see the image. To test if my new files are somehow the problem, I went back and used video files that I have used successfully a year ago, and they no longer play in the monitor window. I hear the sound track, but don't see any video. Have I changed it some setting that controls video playback in the monitor window?

    Randy Ruttger

    Thanks for the follow-up.

    Missing in this equation are the Premiere Elements version you were using and the operating system on which it is running. But...

    The Act is accomplished. But... Up to now, and after that you went ahead and moved to version 12, we now learn what Premiere Elements version you were using. We don't yet know the operating system involved.

    You said first Elements 10. First 10 Elements is affected by a problem serious display known if the computer uses an NVIDIA GeForce video/graphics card card. In this issue, the only cure is to roll back the version of the driver about may 2013. The description of the problem and how to make the rear roller are described in one of the messages at the top of this forum. What video/graphics card your computer use?

    On another front, Adobe will release a new version of Premiere Elements any day now. Not one, but Adobe knows the function defined for the new version. This type of information is announced at the time of the release of the new version.

    So the solution to the problem you presented in this thread could have been...

    1 roll back the version of the NVIDIA GeForce driver for all may 2013 if possible (Windows 8 or 8.1 64 bit, maybe not possible)

    2. move to a different version of Premiere Elements (which you did)

    I offer the foregoing for consideration so that you can review your decisions. We are pleased to learn that the first items 12/12.1 works for you.

    Please do not hesitate to ask questions and seek clarification, but do not forget that the answers are in the details.

    Best wishes

    RTA

  • black screen preview/view in movie maker

    I get a black screen when I try to listen to extracts or view clips which show and play on the line of the storyboard and time table.  I have vista ultimate and have compiled HD MVI files to the storyboard table.

    I get a black screen when I try to listen to extracts or view clips which show and play on the line of the storyboard and time table.  I have vista ultimate and have compiled HD MVI files to the storyboard table.

    Windows Movie Maker (WMM) does not support the mvi file formats.
    These are supported by WMM file formats:
    Video files: .asf, .avi, .dvr-ms, .m1v, .mp2, .mp2v, .mpe, .mpeg, .mpg, .mpv2, .wm, and .wmv

    What you need to do is to get a video converter that can convert the formats mvi formats supported by WMM, namely the AVI.
    I looked on the net. I couldn't find a FREE mvi to avi converter. What I've found are the ones you have to buy.
    Maybe someone knows where to find a free MVI to AVI Converter.

    For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

Maybe you are looking for

  • How can I fix playback 'blocked plug-ins '?

    All of a sudden I can't watch any mobile equipment (BBC News, YouTube, etc.). A few days ago, everything was fine. I have the latest Adobe Flash Reader. What should do?

  • After the replacement of memory, XP stuck in a restart loop

    I replaced two 128 cards memory sticks with two 256. Now I have problems with WIN XP reboot loop. Can someone help with this problem of closing? * original title - I replaced two 128 cards memory sticks with two 256. Now I get the reboot loop problem

  • HP Officejet J6480. Downloaded driver and restarted; get an error message "printer system failed?

    Can't seem to get the printer to print; rebboted and re-downloaded driver

  • How in a dv7 - 4153cl?

    I want to remove the drive of my dv7 - 4153cl. It seems easy. Unscrew the five screws holding the big sign T-shape at the rear and lift the Panel. Loosen the screws, but the group refuses to budge. I found the service manual c02642701.pdf, and he con

  • Computer, quit unexpectedly

    while I'm working or internet usage, my computer stops all of a sudden... will crash black... I have read other responses to this problem, but my Sony Vaio w/Vista does not overheat - it sits on a plateau of cooling plastic... I don't get an error co