Black screen with cursor just after turning on the computer in Vista

When I turn on my computer, it's just a black screen and the cursor. I can move the cursor autour, but I can't go any further. The same thing happens in safe mode. Help, please! :( I tried to repair vista with the installation cd, but it is no problem. I searched around the internet and many people have the same problem, but I can't find a solution to this! Please help me! :(

Hi SiljeRypern,

Please see the thread with a similar problem and fix possible:

http://social.technet.Microsoft.com/forums/en-us/itprovistadesktopui/thread/06881a84-595e-40b0-96CE-87cb7a1874ef/

I hope this helps!

Tags: Windows

Similar Questions

  • Black screen with cursor

    Problem:

    Windows startup but stuck on the black screen with cursor

    System:

    E7440 Dell with Windows 7 Pro

    Description:

    E7440 has a ssd msata 250g installed with an msata to sata adapter. Hard drive's MBR mode. The system works well on Windows 7 pro. E7440 comes with an msata slot, so I removed the adaptor and connect directly on the slot msata ssd. Then the black screen with cursor problem happened. Put the adapter back with ssd and Windows 7 booted up normally.

    I made a disk image of the ssd adapter so that Windows 7 is running, then restore the image to a disk sata hard. The black screen problems are out again.

    Safe mode works normally. Low screen resolution does not solve the problem.

    I also tried to copy of ssd hard disk drive, but Windows boot had another problem: session3_initialization_failed.

    Any help is appreciated.

    Hello

    Thanks for posting your query on the Microsoft Community.

    According to the description, I understand that you get a black screen with cursor.

    I suggest you to refer to the suggestions of Nithyananda J replied on January 6, 2010 and check if that helps.

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-update/Windows-7-black-screen-with-mouse-cursor-in-normal/9fea95dc-7dd6-415e-BBC2-7115311c196c

    You can also check:

    http://answers.Microsoft.com/en-us/Windows/Forum/all/Win7-wont-boot-black-screen-with-blinking-cursor/1b4b501a-6722-446c-8275-c1c568f275b4

    Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

  • Windows 7 Pro black screen with cursor on all modes and no login screen

    OK so basically, it's how, my laptop decided to me-screw right when I need to make some adjustments to my final project for next week.

    Friday he started very well in class and at the end of the course at 6:30, I stopped him. I normally don't that often stopped because I usually find myself opening upward in an hour later. But I did this time and when I got home and turned on around 9:00, it started like this:

    Screen Compaq PhoenixBIOS > Windows boot animation > black screen with cursor mobile, no login screen

    No screen connection. No sound. Not nothing but a black screen and the cursor movement. So I force shutdown and turned it back, this time he asked a chkdsk and I ran it. A ton of stuff file unreadable came and it took all night to run through it all. Tried to start again and Windows Error Recovery came and I tried all Modes of security and start normally and all produce the same black screen and the cursor with no login screen.

    Then I used my Windows 7 dvd repair to try and system restore to a week before. That's where I noticed that windows had installed a critical update at 12:00 on Friday. Tried to restore before that, but he failed. Gave me an error 0 x 80070057 and said I should run chkdsk /r and then try again. Then I used the cmd prompt through dvd repair and he has seen all these things wrong file again once recovered things then realized hours later. Tried to restore the system again. Still the same error. A run chkdsk again through the cmd prompt, then he went to clean without errors or orphaned files or anything, but it took a lot of time. I used the Startup Repair, and he has not found anything wrong either. But still the same error the system restore.

    So I looked around online for the last two days, trying to figure out and that someone said to try CTRL + Alt + Delete, the sticky shift key thing. So I tried to boot the system again, same black screen with cursor movement. I did CTRL + Alt + Delete, nothing. Press and hold the SHIFT key, and a pop-up window asked FilterKeys. Press the SHIFT key 5 times, a popup asked about sticky keys. But that's all I can get it to do. Nothing else. I tried to boot into safe mode with F8, chose, each of them and that changes in screen resolution and the words "safe mode" in all the corners of the screen. If the repair dvd's while I start in safe mode, it will open as well in safe mode, but with the same black background mode. Tried running sfc/scannow through repair invites cmd of the dvd and it says a system repair is pending and he had to restart, and then run the sfc/scannow. Tried, but it doesn't do anything when I restart except go to Windows Error Recovery asking either start in any safe mode or normally. And then it's just black screen again.

    So I am at a complete loss what to do now. After all of this mess, it seems that this Windows Update Friday afternoon did something and when I booted it upward once again, his cause nothing but problems. I think it has something to do with the display and the graphics card drivers? It's as if the thing starts but I do not see anything either because the sticky keys appears, but sees nothing else, no matter what I do. Seriously, I don't want to this junk because this is a new hard drive and I was just able to retrieve my files from my old hard drive that had epic failures as well. And I just got this new specifications I wanted as well.

    Laptop Spec:

    Compaq CQ50-115nr
    OS: Windows 7 Professional
    HARD drive: Western Digital Scorpio Blue 320 GB SATA WD3200BEVT
    Processor: AMD Turion X 2 RM-70
    Graphics card: NVIDIA GeForce 8200 M G
    Memory: 3 GB RAM

    If someone could seriously help me I would be VERY happy.

    Hello

    This isn't good news.

    --------------------

    STOP: 0XC000021A

    Can be a difficult problem to solve, and you indeed need a technical help in a real store of the computer
    (not the leeks and the glances at a BestBuy or other BigBox stores) or system manufacturer support.

    Cause

    This error occurs when a subsystem of mode user, such as WinLogon or the Client Server Run-Time Subsystem (CSRSS), irremediably compromised and security can not be guaranteed. In response, the operating system goes into kernel mode. Microsoft Windows cannot run without WinLogon or CSRSS. Therefore, it is one of the rare cases where the failure of a user mode service can stop the system.

    Incompatible system files can also cause this error. This can happen if you restored your hard disk from a backup. Some backup programs may skip restoring system files which they determine are in use.

    Solve the problem

    Run the kernel debugger is not useful in this situation because the error occurred in a user mode process.

    Resolve an error in the user-mode device driver or system, third-party application service: Because the bug 0xC000021A control occurs in a user mode process, the most common culprits are third-party applications. If the error occurred after the installation of the new or updated device driver or service system, third-party applications, the new software should be removed or disabled. Contact the manufacturer of the software on a possible update.

    If the error occurs during the system startup, restart your computer, and then press F8 to character-based menu that displays the choice of operating system. In the Windows Advanced Options menu that results, select the last known good Configuration option. This option is most effective when a pilot or a service is added at a time. If the error is not resolved, try to manually remove the offending software. If the system partition is formatted with the (FAT) file allocation table, use a MS-DOS boot disk to access the hard disk of the computer. If the system partition is formatted with the NTFS file system, you may be able to use Safe Mode to rename or remove the defective software. If the defective software is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console to access the file. If a room newly installed if material is suspected, remove it to see if that fixes the problem.

    Try running the emergency recovery disk (ERD) and allow the system to repair any errors that it detects.

    Solve a problem of file system do not match: If you have recently restored your hard disk from a backup, check if there is an updated version of the backup/restore program available from the manufacturer. Make sure that the latest Windows Service Pack is installed.

    STOP: 0XC000021A<-- read="" this="">
    * 1314.html http://www.faultwire.com/solutions-fatal_error/Status-System-Process-terminated-0xC000021A-

    -----------------------------------------------------------------------

    Look in the Event Viewer to see if something is reported on those.
    http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

    MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
    TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
    http://www.NirSoft.NET/utils/my_event_viewer.html

    -------------------------------------------------------------------------

    It's my generic bluescreen convenience store - you can try Mode safe mode as suggested in article
    above - repeatedly press F8 that you start. Disks of Vista are probably necessary - if you do not try to repair it, you can borrow a friends because they are not protected against copying. You can also buy the physical disks
    good system machine cheap that you already own Windows (you have to reinstall them if)
    required). You can also repair disks on another computer.

    Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
    info that would help. Such as ITC and 4 others entered at the bottom left. And all others
    error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

    As examples:

    BCCode: 116
    BCP1: 87BC9510
    BCP2: 8C013D80
    BCP3: 00000000
    BCP4: 00000002

    or in this format:

    Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
    Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

    It is an excellent tool for displaying the blue screen error information

    BlueScreenView scans all your minidump files created during "blue screen of death," collisions
    Displays information on all the "crash" of a table - free
    http://www.NirSoft.NET/utils/blue_screen_view.html

    BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
    There are other causes.

    You can do mode if necessary safe or the Vista DVD command prompt or
    Options recovery if your system is installed by the manufacturer.

    How to start on the System Recovery Options in Windows 7
    http://www.SevenForums.com/tutorials/668-system-recovery-options.html

    You can try a system restore to a point before the problem started when one exists.

    How to do a system restore in Windows 7
    http://www.SevenForums.com/tutorials/700-system-restore.html

    -------------------------------------------------------------------------

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to fix the system files of Windows 7 with the System File Checker
    http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates cbs.log Windows Vista (and Windows 7)
    http://support.Microsoft.com/kb/928228

    The log can give you the answer if there is a corrupted driver. (Says not all possible
    driver problems).

    Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

    How to run the check disk at startup in Windows 7
    http://www.SevenForums.com/tutorials/433-disk-check.html

    -------------------------------------------------------------------------

    Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
    keyboard and mouse, as well as of other major device drivers.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    Installation and update of drivers under Windows 7 (updated drivers manually using the methods above
    It is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
    http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    -------------------------------------------------------------------------

    How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
    quit unexpectedly
    http://support.Microsoft.com/kb/958233

    Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
    http://www.chicagotech.NET/Vista/vistabluescreen.htm

    Understanding and decoding BSOD (blue screen of death) Messages
    http://www.Taranfx.com/blog/?p=692

    Windows - troubleshooting blue screen errors
    http://KB.wisc.edu/page.php?id=7033

    -------------------------------------------------------------------------

    In some cases, it may be necessary.

    Startup Options recovery or Windows 7 disk repair

    How to run a startup repair in Windows 7
    http://www.SevenForums.com/tutorials/681-startup-repair.html

    How to start on the System Recovery Options in Windows 7
    http://www.SevenForums.com/tutorials/668-system-recovery-options.html

    How to create a Windows 7 system repair disc
    http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • My Windows Vista computer displays a black screen with only a white arrow to the mouse cursor.

    I have a black screen with only a white arrow to the mouse cursor.  I tried to start in safe mode, safe mode with networking, and safe mode in the command prompt. Each time, I just get a black screen with a white arrow cursor.  How can I get my screen back?

    original title: black screen

    Hello

    Remember to make changes to the computer before the show?

    Try the following methods and check the status of the issue.

    Method 1:

    Disconnect an external device connected to the computer with the exception of the keyboard and mouse and check if it helps.

    Method 2:

    If you have the Windows Vista disc, the computer by using the startup disk and perform the Startup Repair. See the following links:

    What are the system recovery options in Windows Vista?

    http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

    Make repairs to the system from the Windows recovery environment.

    http://Windows.Microsoft.com/en-us/Windows-Vista/make-system-repairs-from-the-Windows-recovery-environment-from-Windows-Vista-inside-out

    Method 3:

    If the method above does not solve the problem, then try to perform a restore of the system from the Windows Recovery Console. You can see the link provided in method 2.

  • After turning on the computer, the screen stays black

    original title: fix a black screen

    After turning on the computer, the screen stays black

    It could be that your video settings have been set to a resolution that your monitor does not support.

    You can start mode (repeatedly tap the F8 key during startup key) safe?  Safe mode requires a video resolution supported by all monitors.  If it works, try to change your video resolution settings
    (Control Panel-> display-> (tab) settings.

    HTH,
    JW

  • I have a black screen with cursor before logon for Windows 7, 32-bit. Help, please.

    Tried to start in safe mode & start the laptop very well, but once I went back to the startup by default, face the same problem again.

    Hello

    Take a look at this thread and follow the same steps listed in the breast.

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/Windows-7-boots-to-black-screen-with-cursor-before/531df029-0dac-4392-9efe-1d35714cf136

    In particular, the bit on a SFC/scannow. Sometimes when you unplug a PC like that, you can damage some essential Windows files. A SFC scan should be able to fix it.

    This link contains a lot of other really good as well troubleshooting procedures.

    I hope this helps.

  • Help.Black screen with cursor on startup after downloading avast

    Hi, I downloaded avast pro is a reboot. It is frozen on a black screen with a white cursor, before the account log in page.

    I can boot into safe mode and after removing the avast program it works normally when you restart.

    When avast is downloaded again the same thing happens.

    Hello

    I suggest that you try to perform the boot repair and check if this can help:

    http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

    It will be useful.

  • Black screen with cursor after boor

    IE9 has been downloaded accidentally. Then I did a system restore to try an get back IE7. What is happening, it was that I was not at the computer all the time. When I come back to check on it that appeared since then is a black screen with a white cursur, I have a desktop pc. There are no icons completely, menu start, user names, nothing. So I'd be gratefu, if I could get help. I bought computer second hand, so it has no disk to reinstall and not return files, thank you

    Hello

    Step 1: Check if you are able to start in safe mode.

    http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

    See: http://support.microsoft.com/kb/946532

  • Windows starts, but does not charge not (black screen with cursor)

    [Sorry for the long post, but I feel the need to explain my situation]

    I have the following problem:

    I turn on my PC, and Windows shows it is normal loading screen, then it goes in a completely black screen, with just the mouse in the middle. By the size of the cursor, I can say that it is in a low resolution, probably 800 x 600 (compared to my usual 1920 x 1080). I am able to movements of the mouse, but with no particular purpose without something to click on. No other keyboard input seems to work, except for press SHIFT 5 times, which shows the keys dialog box to self-retaining (with just 'yes' or 'No' options, no other connection); and Windows key + U, which shows the ease of access Center. CTR + Alt + Del does NOT work.

    So far, that's what I tried (in chronological order):

    1. Start in Safe Mode, Safe Mode with network, safe mode with command prompt Mode, start low resolution video, last known good configuration: all give the same result as to start normally.
    2. Repair of your computer:
      1. Startup Repair: find the registry errors (I realized and fixed this more later on)
      2. System Restore: did not find any previous restore points (I know with certainty that there is, I took the habit of making regular restore points).
      3. Windows memory diagnostic: not found error.
      4. Command prompt:
        1. Ran the command chkdsk /f r, has no error report.
        2. Ran sfc/scannow: I don't remember the exact report, but he asked to restart the computer to complete the repair of the problems. I rebooted and ran the new order for the same result.
        3. Forced the scan with: sfc/scannow damaged = c: \ /offwindir = c:\windows, concluded and repair errors, not always not load windows.
    3. Ran Dell Diagnostics start, found no errors.
    4. Startup Repair ran found once again the registry errors. I found the solution to this in a forum for Microsoft Help ( answers.microsoft.com/.../f77d5355-b8be-41d6-af24-cae994e1768f ) and fixed the problem. I rebooted, but the problem persists.
    5. Startup Repair does not detect now no error. I tried restoring the system again, we find 2 restore points dated AFTER the beginning of my problem. I decided to restore it in any case, but none of them worked.
    6. I ran Windows Defender in offline mode:
      1. Quick scan: and found 2 threats and remove.
      2. Full system scan: found 4 more threats, removed 2 of them, the other two could not be removed because they were in an ISO file.
    7. I've tried steps 1, 2 and 3 with no luck.

    With every step, I am aware that I am closer to having to reinstall Windows, then I decided to see if I could still access my HD to save my personal files. I did a live Linux CD (with Ubuntu), but I have a problem of mounting the readers, because they are in a RAID0 configuration. "sudo dmraid s" gives the following error: "ERROR: Sie: number of devices in RAID wrong value"isw_dbdffjficc_ARRAY0"[1/2] on/dev/sdb.

    Important details:

    I changed my graphics about 4 months ago (a 750ti of Nvidia GTX for an ATI Radeon HD 6450), and told me that I can run short with the power supply. The new card requires a minimum of 450W, and I think that my diet is 460W. This may or may not have something to do with this question, I have no idea.

    My 2 hard drives of 500 GB RAID0 configuration has brought me a lot of problems of the day 1. One of the HARD drive would be randomly (I am able to hear a clicking sound different when this happens) failure and the computer would break. At the start, he would ask a boot device. The Dell boot utility would then recognize only 1 readers, but would end without errors. After a reboot or two, everything would be fine and would be boot windows normally (apart from the usual error recovery screen) with no sign of corrupted data or anything. As I said, it happened are the arrival of my PC, but restarting a couple of times still attached. From now on, the two HD seems to work very well, the Dell utility recognizes two of them and found no errors in one of them, and I can access any directory from the command prompt.

    Is there anything else I should try before reinstalling Windows?

    Before the installation, I really wish I could recover my files (I have important documents of the College), is it possible to do this?

    Sorry again for the very long post (and for any errors of language, English is not my native language) and thanks in advance.

    Since you have not yet had your data readers. I recommend a Windows installation without formatting the drive... I don't like this solution, but at this point, you have probably tried everything.

    Use a reinstallation of Windows 7 installation DVD, make sure that you select...

    Select custom: Install Windows only (Advanced)

    If you do not select one of the route options and everything simply highlight the largest partition and click Next:

    Windows will dump all the old Setup files into the Windows.old folder

  • HP laptop: black screen with cursor

    When I turn on my computer and type my password, it goes to a black screen with a cursor.  I tried different things but nothing works.  I just did a restore of the system 2 days ago cause the fan was not working. It worked yesterday.

    Hello

    Boot the computer normally and log.

    Black screen, hold down the ctrl and alt keys and press delete.

    Select Task Manager.

    At the bottom left, select details (if it is not already selected).

    Click in the header of column Nsoul to organize the processes in alphabetical order.

    Look for an entry called to run once Wrapper (RunOnce.exe) - If you see it listed, right-click on it and select end task.

    If your office now appears, download AdwCleaner on the following link (there are 4-5 second delay until it's available)- Save in your downloads folder.

    https://toolslib.NET/downloads/finish/1/

    A once downloaded, close all programs, open your download folder and double-click the application to run it (click Yes to any uac prompt).

    Click the scan button.

    When the results are displayed, click the Clean button - when you are prompted to restart, click Ok.

    It starts on the desktop correctly now?

    Kind regards

    DP - K

  • XP shows the MESSAGE about how to start, but then stops at a black screen with cursor

    Today, instead of start normally, my Dell displays the usual POST screen, then a black screen with a cursor blinking (dash). He is not following the XP splash screen. After the machine is turned off and restarting, I pressed F2 repeatedly and eventually got to the configuration of the system. Then I pressed ESC and exit, and the machine starts normally on the desktop. This has happened 3 times since. Social site from Microsoft suggests that the master boot record has been damaged, or that the NTLDR file may be missed. Anyone know how to check this?

    hunty7,
    Take a look at this article.  He explains a situation similar to yours and gives the troubleshooting steps.
    http://support.Microsoft.com/kb/314503

    Let us know the results. Mike - Engineer Support Microsoft Answers
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Pavilion dm4 does not start: black screen with cursor blinking up to no left, no error message

    Nowhere on my HP Pavilion dm4 close last night and does not restart.  When I turn on the computer, I get a black screen with a cursor blinking in the upper left corner.  I ran a variety of diagnostics and all seems OK (i.e. no error message).

    I am able to start the computer in mode 'Media' - and I see all my files.  However, I'm unable to start the computer normally.  Help, please.

    My computer is old - 1 year and 25 days to 25 days outside the warranty period.

    Thank you.

    Hello

    Boot from the new rescue CD, select repair your computer and choose the command line.  When this charge, enter the following commands and press on enter after everyone – including spaces as shown.

    Bootrec.exe

    bcdedit/export C:\BCD_Backup

    c:

    Boot CD

    BCD attrib s h - r

    Ren c:\boot\bcd BCD.old

    Bootrec /RebuildBcd

    Bootrec /fixmbr

    Bootrec /fixboot

    Remove the rescue CD and try to restart now.

    Kind regards

    DP - K

  • Black screen with cursor blinking on HP Pavilion dv6z-3100 CTO Entertainment Notebook PC

    I have a HP Pavilion dv6z-3100 CTO Entertainment Notebook PC that I bought in 2010 and recently my brother was messing around with it and wiped the whole pc now im unable to use it because when I turn it on after one so that it displays a black screen with a cursor blinking (the typing cursor) and I don't have any recovery disk is a drive that I can use it to restore my computer for example a windows 7 64 b + supp 2 recovery?

    Hello

    You can order a set of replacement recovery disks using the link below.

    http://support.HP.com/us-en/document/c00810334

    If you have a problem with this link, order them directly from HP.

    If you live in the United States, contact HP here.

    If you are in another part of the world, begin here.

    Kind regards

    DP - K

  • Windows 7 shows a black screen with cursor

    I tried to upgrade my desktop Windows 7 Edition computer Home Premium to Windows 10.  I did the morning but left him to finish while I was at work.  When my husband returned he said it was completed 99% so it just reduced and used the computer.  At the time I got home a few hours had passed and it was still 99%.  I tried to restart and now after I get in Windows startup and password screens. I have a black screen with the arrow cursor moving very well.  How can I fix?  Thank you!!

    Hello Mary,.

    I would like to know some information about the problem so that we can help you better.

    What is the brand and model of your computer?

    Thank you for details on the issue.

    I also know that the inconvenience that you are experiencing due to black screen problem. I will definitely help you.

    This problem may occur because of corrupted display driver.

    To diagnose the problem, please Start Windows in safe mode and check the number.
    Reference:
    https://support.Microsoft.com/en-us/help/17419/Windows-7-Advanced-startup-options-safe-mode

    If the problem does not persist in safe mode, uninstall the display driver. Please follow these steps:

    a. press Windows + R keys together, type devmgmt.msc in the run box, and then press ENTER.
    b. Click to enlarge graphic cards, right-click on the map and click Uninstall.
    c. restart the computer.

    Now, reinstall the display in normal mode driver. You can either download and install the driver to display from the manufacturer's website or proceed as described in the following article.
    Reference:
    Updated a hardware driver that is not working properly
    https://support.Microsoft.com/en-us/help/15048/Windows-7-update-driver-hardware-not-working-properly#update-driver-hardware-isn ' t-work-properly = windows-7

    I hope this information helps.

    Please let us know if you need more help.

    Thank you

  • Windows 8 will not start, shows a black screen with cursor

    I tried to turn on my hybrid 3 cell / tab lenovo black this morning. After starting, it shows only a black screen with the cursor mouse mobile, but it stays like that for hours, until now. I can't turn it off, nor can I force turn it off by unplugging the battery it has unified the design of the body. What can I do?

    Hello Mel.

    Thanks for posting your question on the Microsoft community.

    Thank you for details on the issue.

    This problem may occur because of corrupted display driver.

    I suggest you use the steps in this article and check if it helps.
    Reference:
    How to solve a problem of black screen crash
    https://support.Lenovo.com/in/Hi/documents/ht079944
    (Also valid for Windows 8)

    I hope this information helps.

    Please let us know if you need more help.

    Thank you

Maybe you are looking for