Black screen with reduced windows of the internet (sometimes white)?

Similar Questions

• Satellite U405 black screen when I surfed on the internet

  Madam, Sir, I am a student in the third year and my laptop has a problem, I need help. This will be the black screen when I surfed on the internet for over 3 hours. Why?

  I guess my laptop battery is the key to the problem and a few friends recommend a battery for me web.
  What do you think about this?

  Your ad is a little strange to me.
  How you can surf internet if the screen is black? I mean, it's not logical for me.
  What Toshiba laptop model do you have?

• Screen is frozen with a black screen with blue windows logo on it.

  Original title: problem of Windows 8

  I just bought windows 8 and is now downloaded and installed. But it seems that my pic froze or something because for about 2 hours now it is stuck on a black screen with blue windows logo on it. After research, I found a video and in this screen in a minute or two! Anyone know anything about this? I need ASAP thank you!

• Black screen with blinking cursor after the passage in MSC mode

  I followed the recommendation to disable startup secure in the Bios then move the UEFI Bios to the CSM. But when I go to set up what I see is a black screen with a stable cursor in it. And it doesn t go in the Bios.

  The black screen remains.
  I turn off the laptop and once again now, but I still have a black screen with a cursor that is stable and that s it.

  It's like that and it doesn t go to windows even go into the Bios, I can t.
  What should I do?

  Help, please...

  Hello

  After the passage of the CSM and disabling secure boot UEFI mode, you will not be able to boot from the HARD disk as the installation of Windows 8 requires secure boot and the mode of the UEFI.

  Now you can boot from the disc or other media bootable (USB flash key) to install the Windows 7 system.

  I guess you've made these changes installed Windows 7. Right?

  By the way: what model of laptop you have exactly?

• I have the virus of file recovery, now I have a black screen with cursor blinking in the upper left corner.

  I have a Pavilion Notebook and recently caught the virus from file recovery.  I bought and ran the disc of Trend Micro Titanium Maximum Security.  Now, I get a black screen with a flashing cursor in the upper left corner of the screen.  All tests ran for memory, hard disk, etc. are OK.  Now I have a recovery disk, but have not backed up my files.  Any suggestions?

  Download your backed up files, then you can boot from your recovery disks to reinstall Windows.Several options to do so.

  Remove the hard drive and attach it to one > USB adapter . Plug it into another computer via usb port and copy files off the power.

  You can use > Ubuntu Live CD to boot from and backup files.

  OR ->Kaspersky CD has the ability to back up files.

• Black screen with flashing '_' in the upper left corner.

  Im running Vista 64-bit Home Premium and recently ran chckdisk because the computer found some "bad sectors" and prompted me to run. After reboot, the computer loads the image in which I can press "delete" to enter the bios (which I do), then press "tab" to go to the post OFFICE (which has no effect and always load the black screen with a '_' blinking at the top left. If I do nothing, the black screen with the '_' blinking always appears after the image. I can't start in safe mode or access the "Advanced Boot Options". The only thing I can do after the black screen is press "ctrl alt del" in which the same process begins.

  I bought my computer from online retailer so it did not come with any CD to restore/recover...

  Hello

  1. did you of recent changes to the system?

  Check her unplug all devices external (except keyboard and mouse) and if you are able to boot.

  If this isn't the case, I suggest you contact the manufacturer or retailer for a Windows Vista Installation DVD.

  Once you have the DVD you can try to perform the Startup Repair.

  Method 1: Run a startup repair.

  (a) Insert the disc.

  (b) restart your computer using the power button on the computer.

  (c) If you are prompted, press any key to start Windows from the installation disc.

  (d) If your computer is not configured to boot from a CD/DVD, check the documentation that came with your computer. You may need to change your computer's BIOS settings.

  (e) choose your language settings, and then click Next.

  (f) If you are using the Windows installation disc, click Startup Repair. (g) click ok when you are prompted.   Follow the steps in the link to perform a startup repair. http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  Hope his helps.

• Satellite A100-033 - black screen with no data after the advanced boot option

  I tried each F8 option in the advanced boot options to get my work laptop. There is just a black slowed after repairing Windows files and Loaded. Also F2 & F12 even when I try to use the recovery disk it remans black?
  Safe mode: nothing is displayed on the screen at all

  I noticed my mouse cursor can be seen moving around the screen, but the rest of the area is black.

  OS Windows Basic 32 bit IE9 Satellite A100-033

  Hey,.

  So if you start from the Toshiba Recovery disk you also get a black screen?

  What happens if you start from a normal Microsoft Windows disk? Just to make sure that it of hardware related problem or not

• Screen freeze and black screen with multiple windows problems

  Hey all,.
  I have problems with the release of screen when you run multiple windows (Chrome, office etc. etc.). When I try to switch between the windows, I get a gel and I am unable to do anything.
  The cursor can be seen moving around the screen, but has no effect in all areas. The Windows key is not Sleep, nor can I tab into another program.
  If I try to start the Task Manager to see which program is the cause, it will not appear on the arrested image.
  Is there a way to tell, of an event log, this program is a failure?

  in windows 7: Start - Search event Wiever field - Windows logs

• Spore, black screen with sound, Windows 7 64 bit

  Hey,.

  Since I got my computer windows 7, I could not play Spore. When it installs, I press the launch button. Actually, the game crashes because I can hear the sound but can't see the graphics, its just black. This also occurs with most of my games in fullscreen, for example the Sims 3, Saints Row 3, portal... All I want is to be able to enjoy my games in fullscreen without feeling like ive wasted my money to buy it. If you need info from my computer one please ask and tell me how to get it for you: P
  Thank you
  James

  Hi James,

  Thanks for the reply.

  I suggest you try the procedure described in the article and see if it helps.

  Game hangs or quits unexpectedly
  http://support.Microsoft.com/kb/303032/en-us

  Check out the link for more information.

  The problems of the game performance
  http://Windows.Microsoft.com/en-us/Windows7/fixing-game-performance-problems

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• HP G72-227 WM won't boot to Windows 7. Goes to a black screen with a cursor.

  My laptop is a little older than a year.  Operating system is Windows 7 Home Premium. When you try to start, F11 to get to Recovery Manager does not work. It's just a black screen with a cursor.  The version of the BIOS F.17. Conducted tests of diagnostics and everything going on.  Lost my boot drive. Borrowed from a friend but it is not going to fix the problem. When you run the Startup Repair tool, it is said that if you have recently attached a device to this computer, such as a camera or portable music player, remove it and restart your computer.  There is no device connected but it keeps coming back.  System Restore has tried the borrowed boot disk and it does not restore the message gives that an unspecified error occurred during system restore. (0x8000ffff).

  Hello

  If you still have the startup disk that you have borrowed, boot from it again, select repair your computer and choose the command prompt.  When this charge, enter the following commands and press on enter after everyone – including spaces as shown.

  Bootrec.exe

  bcdedit/export C:\BCD_Backup

  c:

  Boot CD

  BCD attrib s h - r

  Ren c:\boot\bcd BCD.old

  Bootrec /RebuildBcd

  Bootrec /fixmbr

  Bootrec /fixboot

  Remove the startup disk and try to restart the laptop.

  Kind regards

  DP - K

• black screen with no cursor or available bios

  I have a HP Pavilion dv7 laptop, which seems to agree, but has a black screen with no cursor.  The fan runs for a few seconds and flashing lights show near the top right the keyboad and cap lock button.  I pulled the hard drive and tested ok and tried to move the memory with no luck.  I also tried the trick to reset by turning off the power switch for a minute.  I searched this forum and anywhere on the internet that I could find, and all I could gather was that it is not uncommon, but no one seemed to have an answer.   The cmos battery cause this?  I always have one battery to verify, but it's a different style and I have to order a.  This computer is about two years old and with Vista.

  Never mind! Looks like you got.

• Black screen with cursor blinking on HP Pavilion dv6z-3100 CTO Entertainment Notebook PC

  I have a HP Pavilion dv6z-3100 CTO Entertainment Notebook PC that I bought in 2010 and recently my brother was messing around with it and wiped the whole pc now im unable to use it because when I turn it on after one so that it displays a black screen with a cursor blinking (the typing cursor) and I don't have any recovery disk is a drive that I can use it to restore my computer for example a windows 7 64 b + supp 2 recovery?

  Hello

  You can order a set of replacement recovery disks using the link below.

  http://support.HP.com/us-en/document/c00810334

  If you have a problem with this link, order them directly from HP.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  Kind regards

  DP - K

• Windows 10 boots and stuck on the black screen with high CPU

  Hello

  I have a MBP 15 "mid 2015 16G with AMD R9 M370X i7.

  I've been running bootcamp with Windows 10 installation for about a month now without any problems.  However, yesterday 10 Windows started and has been blocked in a black screen (before any screen logo or connection win) with the CPU works hard and hot.

  1. I tried to restart some time hold button / stop and start with the option key, key and then selecting the windows bootcamp partition but it drove the same black screen with CPU hot work in the background.

  2. I can always start OSX fine during this period.

  3. I tried to leave in the black screen for a good 10 minutes, but it does not change and the MBP gets really hot.

  4. I tried clearing NVRAM with Boot option + command + P + R

  5 I can't in Windows 10 safe mode using F8 or FN + F8 after you select windows to boot manager (starting with the down option).  Am I missing something here?

  I don't have a copy of Installer windows 10 with me right now unless someone can tell me how to create one under OSX.

  I searched on the internet forum and apple, but have not found a solution that works for me.  Many speak of win10 black screen with cursor showing, but my question is just a black screen with no cursor.

  Someone at - it other ideas besides reinstall Windows 10?

  You have a black screen with or without power adapter, both? If 10 Windows does not start correctly three times, it should bring up the recovery console. Windows automatic updates are enabled? You have created/activated Windows system restore points?

• Black screen with windows to return to the scroll bar - Qosmio G30

  Hello

  I was wondering if someone can help me. I have a Qosmio G30-161 and I encounter a few problems with it right now, every time I close the top of the laptop and leave it for about half an hour that I reopen the form and I get a black screen with a running scroll bar downstairs with the message saying "Resuming Windows to troubleshoot with windows press anyone." I let the scroll bar run its course and it goes back to the screen where it was before I close the lid. Can someone help me this is driving me crazy having to wait for the roll bar all the time, it has only recently begun.

  I also have a problem concerning the closing of windows Explorer. Whenever I do this I get an error message "Error 217", this all started when I installed Norton Anti virus, I uninstalled this product and the problem resolved, I reinstalled norton and the problem came back.

  Anyway to solve this problem.

  Thank you very much.

  First of all can you explain to me what should happen when you close the lid of the display?

  In the settings of power at the moment is chosen the track option: when I close the lid to HIBERNATE. Please check this option on the tab stock setup and choose your preferred option.

  I have no explanation for this Norton related issue. If Norton brand issues I recommend you to use other (better ;)) software.

  Good bye

• Windows 7 black screen with the cursor of the mouse in normal mode and safe

  Hi all
  I hope someone can help.
  Laptop downloaded updates and after the restart will only go to a black screen with the mobile mouse cursor.
  This occurs in safe mode, normal mode.
  I tried all variations of safe mode and still the same thing happens.
  Last known configuration does not solve. (i.e. no restoration or image to enter)
  Using the vista win7 dvd upgrade or a linux dvd and screen appears as you expect his obvious system is very good.
  I tried the options on ctrl alt del, ctrl shift esc etc etc, but I cannot go into Control Panel, or a any part of the win7 GUI.
  Best I can do is access via the command-line... any thoughts on how to fix?

  Hello

  Welcome to Microsoft Windows 7 answers Forum!

  You can try the following steps and check whether the problem is resolved.

  You can disconnect all external devices except the keyboard and mouse and check if you are able to boot to the desktop and check.

  I also recommend what to do the Startup Repair. Follow these steps:

  To perform a Startup Repair follow these steps:

  1. Insert the DVD of Windows 7 and restart the computer.

  2. when we are asked to press a key to boot from the DVD, please press enter or the SPACEBAR.

  3. choose your language settings, and then click Next.

  4. click on repair your computer.

  5. Select the operating system you want to repair, and then click Next.

  6. in the System Recovery Options menu, click Startup Repair. Startup Repair can invite you to make choices as it tries to solve the problem, and if necessary, it may restart your computer, because it makes the repairs.

  Access the link below for more information on the Startup Repair:

  http://windowshelp.Microsoft.com/Windows/en-us/help/5c59f8c1-b0d1-4F1A-AF55-74f3922f3f351033.mspx

  See also:

  http://social.answers.Microsoft.com/forums/en-us/w7install/thread/ab43493b-247C-427e-BA21-4950eea279ac

  http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/24b44a01-872e-4d87-867f-ed01a3579031/ for the black screen problem

  Thank you, and in what concerns:

  Suresh Kumar-Microsoft Support.

  Visit our Microsoft answers feedback Forum and let us know what you think.