Black vertical line on screen

Similar Questions

• HP Officejet Pro 8600 more black vertical line when copy or scan

  HP Officejet Pro 8600 more black vertical line when copy or scan everything in the middle of the page

  Hi Clementstl,

  I understand that you have a 8600 Pro Officejet which puts a black vertical line in the center of your copies/scans. I'm sorry to hear you had to deal with this, but I will certainly do my best to help you solve this problem.

  I recommend the rest of this document of vertical stripes, lines or streaks in the Copies, faxes or Scans as it should be in a position to help to cross that line. The most common cause is a small spot of something on the glass of the scanner, so just make sure that when you're cleaning use you as much elbow grease you can collect

  Just to clarify a little further, if the problem only seems to occur when you use the automatic document feeder, you'll want to focus your attention on the small strip of glass that he uses on the left side. If it only occurs when you use the flat glass, you want to concentrate on the large piece of glass he uses.

  Hope this helps, have a nice day!

• DeskJet 3835: Black vertical lines when scanning - Deskjet 3835

  Hello

  Whenever I scan using the document feeder, there are black vertical lines showing on the picture. This happens with the dish however. The printer is the 3835 Deskjet all in one set. Receive your answer. Thank you.

  The lines that you describe would generally caused by a small file specifications (or some spec) on the thin glass to the left of the bed main scanner.  Open the scanner cover and clean the thin glass.  It can help to shine a bright light which is held at a slight angle to the bed of the front.  This would be to highlight the areas to be cleaned.

• OfficeJet pro 8600 black vertical lines of print when copying

  I got a new of OfficeJet Pro 8600 a couple of weeks, and it worked fine until today, when I tried to copy something. I can always print from my pc and scan without problem, but when I try to copy a document (if I load it into the tray or put it on the scanner) the page comes out covered with black vertical lines of different sizes. It seems that this isn't the ink or the scanner since I can print from my pc and analysis very well.

  Help, please!

  This unit is plugged into a wall outlet directly? If this isn't the case, then try to connect the unit to a wall outlet directly.

  The 8600 Officejet Pro has built in the surge protector and double this feature may cause some problems.

  Also, try to reset the printer hard:
  * Unplug the unit while the printer is on
  Disconnect the other end of the power cable from the wall socket direct
  * Wait 30 seconds
  * Plug the unit to the top

  Let me know if it helps.

• All-in-one HP Office Pro 8610: black vertical line on the scans

  I have a black vertical line down my scans and copies that are feeding by automatic feeding (8610 Office Pro HP all in one)

  As I read a few issues on the forum, I could solve this problem by opening the top loader and wipe the glass with a "lens Wipe" wipe Strip

• I have Toshiba laptop running Windows XP Professional edition. I have a vertical line on screen ranging from very high to very low. It's about an inch from the right side of the screen. How can I solve this problem?

  I have Toshiba laptop running Windows XP Professional edition. I have a vertical line on screen ranging from very high to very low. It's about an inch from the right side of the screen. How can I solve this problem?

  Sorry to hear that, but the screen is bad and must be replaced!

  Good luck! Please rate me upward if you find my post helpful. Thank you!

• HP Officejet Pro more than 8600: HP Officejet Pro 8600 more black vertical line when copy or scan with automatic feeding

  HP Officejet Pro 8600 more black vertical line when copying or scanning using auto flow only.  It works very well on the flat.

  It is now resolved.  It seems that there is a strip of glass that is used for the automatic copy of power and research.  The glass has a note on it that I cleaned which solved my problem of vertical line.

• vertical line on screen

  My Mac has a vertical line on my screen, up and down, about 1/3 left. The line is very small but clearly visible.

  Any solution? Thank you.

  Hello

  Might be a good time to run the Apple Hardware Test

• Satellite Pro A10 - 3mm thickness vertical line on screen

  I have a thick vertical line of 3mm on the screen seems to come up in colors, it generally moved to gray.

  The display was damaged - or is this some sort of driver problem.

  Hello

  It looks like a hardware malfunction. UPS may be a FL. But I m not 100% sure.
  What you can do? Well, if it's really a hardware fault so the only way is to contact Toshiba service. But it could also be a strange software problem. In this case, the best way is to recover the operating system and/or update the graphics driver. You can also check your BIOS version. If there is a newer version, then try to upgrade the version of the BIOS.
  But if the material is broken, then contact ASP.

• Green vertical line on screen - Satellite P30 Pro

  A single thin green vertical line appeared about a sixth of the way across the screen. It works up and down continuously and immediately displays the screen is activated.

  I presume that this indicates a hardware failure - can anyone confirm please? Guess I'm interested in large bills?

  Hi Ian

  How is - someone must provide an exactly fault diagnosis without putting the hand on this laptop?
  Here, we can suggest and discuss only!

  If she really looks like a hardware problem, but the question is; What s wrong.
  In my opinion, you must connect the external monitor to the laptop. Check if the same vertical line appears on the second screen!

  If Yes, then the chances are high that the graphics card is broken! This could be a case value because the GPU is soldered on the Board and the entire motherboard must be replaced to solve this problem.

  Concerning

• Vertical lines on screen

  Can someone help me?

  I have vertical lines on my screen, all the time.
  How can I remove it?

  Thank you.

  To remove them is not so easy because you don't know why they are there.
  The lines can be displayed with the defective display or defective graphics card.
  If possible, connect your laptop to external monitor and check if the same will be shown.

  If the lines are displayed on the external screen, the graphics card is defective and the entire motherboard must be exchanged. :(

• Vertical line on screen S1216 L25

  I have a single vertical line on my screen. Anyone know how to fix this? It has been published recently. There are no other significant problems.

  Hello

  I agree with James. Check if the same product with an external monitor. In any case, it's probably a malfunction of the equipment.

  Service partner chartered which you will find under http://www.csd.toshiba.com/cgi-bin/tais/su/su_gaspLocator.jsp?pf=true

• Vertical lines on screen - Equium A100

  In the past two weeks a vertical line has been appearing every now and then towards the end of the right side of the screen (from top to bottom) on my A100-147 and I'm a little concerned as to why this is.

  Can someone help and tell me what the problem is please?

  It s not dull if there line horizontal or vertical s.
  Fact is that this show is displayed if there is a hardware problem.

  How to find what's wrong?

  You could connect the second external monitor to the laptop and could check whether the same appears on the external monitor.
  If yes then-> I assume that it s a GPU malfunction
  If not-> then the screen itself could be faulty

  In both cases, the replacement is necessary and could be costly!

• Vertical lines on screen - Qosmio F10

  I need assistance with vertical lines on my screen.
  It began before the period of one month, and I don't know what to do.
  Now, I work in SafeMode because Windows XP used to operate normally.

  The service where I bought it, they say I have to buy the new motherboard because the graphics card is integrated on the motherboard and graphics card loses contact with the motherboard.

  Now I should spend about 900 to buy the new card mother and graphics card, but it is stupid because I bought new Toshiba before 2 years for 2,000 and now does not work normally.
  Does anyone has a good idea how to fix it or some pages where I can find parts for my Qosmio? It is easier to say that someone to spend 900 to fix.
  Where are now best Toshiba notebook that everyone talks about.

  Help, please.

  Kind regards
  Mirko

  Hello

  I can really understand you and of course it s very stupid situation, but I guess that the guys of ASP are right and this problem really looks like a graphics card problem.
  The vertical lines on the screen are very typical for a malfunction of the graphics card.

  So I see really no other possibility as to replace the motherboard.
  Maybe you can buy one second hand and it could be a little cheaper.

  PS: I bought an extended warranty with my new laptop and I recommend to all this extension because a hardware malfunction can always happen.

• Opaque vertical lines in screen of magnetic cover?

  The vertical lines that cannot be rubbed off on the touch screen that is protective of the installed screen corresponding perfectly to the tapes in the protective cover HP. Permanent?

  Hi, I too have the same order of ideas on my Touchpad, but mine will clean the with a micro cloth for glasses.

  If you look closely at each line aligns with the creases on your cover. When the lid is closed and you look lower or higher, you can see a gap corresponding to each trick. The dust gets in and builds up on the screen along this gap.

  I did not have a screen saver but have coverage.  Dust adheres to the surface of your screensaver?

  only thing that makes sense... you could probably pull up the nearest corner of the 'line' and look below...

  Kind regards

  Louis