BlackBerry 10 same after upgrade to 10.3.1 I'm always being invited to update the operating system

Model - Q5.

OK, so after much trouble I took to remove some Apps etc to make room for my Q5 upgrade to version 10.3.1.2243, I finally managed in the upgrade of the phone. Shortly after, just at the moment where I thought I was ready, I started to receive upgrade notifications again and this time I was prompted to release an another 1.7 GB of my phone, which is practically impossible. The updated version that I'm being invited to space costs for is 10.3.1.1565.

When I connect through Blackberry link, it shows my software as an update with the version 10.3.1.1565 installed. Can someone please tell me what's going on, because there is no way I can create an extra 1.7 GB of space for a new update.

Screenshots of the issue are attached for your reference.

Thanks in advance.

I suggest that you close the update for now.

Do a restart: with the phone smart BlackBerry power on, press on and press and hold the power button on top about 20-30 seconds, ignore the 3-2-1 timer and hold the button until the screen goes black and you see the red LED.
or
Restart: With the phone smart BlackBerry turned on, using the keys of volume of the edge side, press on and hold the keys of volume for about 20 seconds and both of the Up, ignoring the initial message of screenshot... the screen go black, reboot.

Now, back to settings > software updates and see if it runs.

Tags: BlackBerry Smartphones

Similar Questions

  • My iPhone-ish syncs with macbook pro when it comes to iTunes. Message reads "iPhone need latest version of iTunes. I can't understand how to upgrade iTunes on the iPhone, unless it comes to update the operating system. I guess I have the latest OS, 9.3

    My iPhone-ish syncs with macbook pro when it comes to iTunes. Message reads "iPhone need latest version of iTunes. I can't understand how to upgrade iTunes on the iPhone, unless it comes to update the operating system. I guess I have the latest OS, 9.3.2 on my iPhone. Any help for this problem?

    • Sync with iTunes on a Mac or a PC requires:

    iTunes too old and too old osx to support necessary to have iTunes, you will need to update osx to update iTunes to work

  • Battery problems of Smartphones from blackBerry after updating the operating system

    Hello world:

    I have updated my OS (Torch 9800) 6.0.0.576 and after that, battery life decreased significantly. You have an idea on the problem/solution? I replaced the battery and the problem remains the same!

    Thank you!

    joelg

    On device, go to Options, device, application management is a great way to see what your applications with your use of the CPU on #Torch. Simply drag bar greater than CPU and see what happens. Also touch the CPU menu to see other time variables. I discovered that an application has been eroding CPU cycles on my own

  • I am restoring an old Optiplex GX260 after updating the operating system to SP3 NET. Bulid 4.0 I lost all control.

    I also turned on thinking pci slots I got a sound card, it turns out be an entry of phone card I don't need, this could be the cause or can someone HELP me get my sound mixer and volume controls. It would be greatly Apprecieated.

    [Moved from comments]

    Click on the link below, enter your service tag and download and install the drivers of devices available, including for your audio device.

    http://www.Dell.com/support/drivers/us/en/04/DriversHome/ShowProductSelector?FKEY=Drivers_PS

  • BlackBerry Smartphones can only update the operating system on Curve 8520

    Can someone tell me please, can I get the new operating system on my 8520 please?

    What do you mean when you say "new system of operations? The latest OS released for the 8520 is 5, I do not think OS6 and OS7 will be released for the 8520 that there no hardware to run it.

  • I have an unable to print with Epson Workforce 2540 after update of the operating system at El capitan

    I cannot print on my Epson Workforce 2540 via my home wi-fi after updating the operating system to El Capitan (10.11.5).

    The news of printer Epson shows that it is connected to the network. After sending a file to print, I get this error message: stop - "filter" has failed

    The Mac App store shows that my printer software is up-to-date. Can you help me, please?

    did you go to epson web site and watch if they have a driver that support el capitan? If they don't you will have to revert to a version of Mac OS x, they have a driver for or get a new printer

  • BlackBerry smartphones, I can't enter Thai language. How can I upgrade and choose the operating system for my BB9900?

    How can I upgrade and choose the operating system for my BB9900? I need thai input but on the site of H3G Italy software download is not all the language version. I don't know from which site to download.

    Hi niranaja

    If your device is running always on OS 7.0 then try 7.1 any Pack OS carrier that also supports Languages.But of Southeast Asia before opening your computer and uninstall any previous packs if installed OS on it. After that, try this:

    1. download and install on your PC a pack OS with any language by carriers

    • (Make sure you download for the same phone model)

    2. download and install the latest version of BlackBerry desktop from here BlackBerry desktop software software

    Then using software office perform your full backup of your device.

    3. search your drive C: Vendor.xml and delete them, there may be one or two vendor.xml (on changing your Pc folders option to show the hidden files/folders ):

    • C:\Program Files (x 86) \Common Files\Research In Motion\AppLoader
    • C:\Users\Windows UserName\AppData\Roaming\Research in Motion\BlackBerry\Loader XML

    4. go into C:\Program Files Research In Motion\AppLoader. (For Vista or Windows 7 64-bit, the path will be C: > Program Files x 86 > common files > Research In Motion > AppLoader) double-click on Loader.exe.

    Upgrade will continue then after Installation of the new OS restore your BlackBerry Desktop backup

    Software.

    Once done open BlackBerry Desktop Software (7.1) > select Applications. > in the section of language and support for entry , select the language to be added to the BlackBerry smartphone (a + will appear next to the language to install) > click apply.

    KB13067 : How to get smart BlackBerry phone language packs.

    So please try it and let us know.

    Prince

    _____________________________________________________________________________

    Click 'Like' If you want to thank someone.

    If problem resolves mark message (s) as a 'Solution', so that others can use.

  • Upgraded the operating system blackBerry smartphones

    Can someone please give me a link to upgrade my phone! and instructions on how to remove the right files and how to load it on my phone!  Thank you very much

    First download and install from here Office Manager (4.7 without Media Manager is recommended): https://www.blackberry.com/Downloads/entry.do?code=A8BAA56554F96369AB93E4F3BB068C22

    Then download and install the software from here: http://na.blackberry.com/eng/support/downloads/download_sites.jsp

    Then try to reload the operating system by connecting the device to your computer, open the Desktop Manager, then go to the Application Loader. This will open a wizard who travels to reload the operating system on your device. More detailed instructions can be found here:
    http://CrackBerry.com/BlackBerry-101-How-install-or-upgrade-new-rim-operating-system-OS

  • After upgrade from Vista to Windows 7 Ultimate home, no problem connecting to the internet when logged as an administrator, but cannot connect to the internet using the standard account. How to fix this?

    After upgrade from Vista to Windows 7 Ultimate home, no problem connecting to the internet when logged in as an administrator,

    but unable to connect to the internet using the standard account.  I have the latest version of the Solution Explorer.

    How to fix this?

    Glad to hear it.

    If the problem is resolved, mark the message as response, then it'll be useful for people with similar/identical problem.
  • 11 - k000na: problem of restart of the operating system after disk erasing

    Hi there are members of the HP support forum!

    I bought my product, the HP Pavillion 11-k000na, in October of last year and around in time to March this year, I found the speed of the computer to be really bad, so I decided that I do a disk cleanup and restore the computer to factory settings I've done. Restart the computer, I discovered that something has gone wrong and after many failed attempts I could not restart the operating system.

    Time and time again, the laptop gives me the same error - message

    Error code 0 xC0000001

    When I bought the computer it came installed with windows 8 and I've quickly updated to windows 10, would be the problem that when I restored it to factory settings, it does not know how to restart now?

    Any help would be really useful thanks!

    Oliver

    Hello

    On the upgrade of Windows 8 to 10, built in recovery partition got corrupted and will stop running more.

    How do you reset phone?

    Only I know is to order for your model of HP USB recovery. Or pure 8.1 Windows update install using Windows Media creation tool. Both methods retrieve product key of activation of the Board BIOS chip, automatically and be activated.

    Concerning

    Visruth

  • BlackBerry 9550 smartphones - cannot load the operating system and a re-boot loop

    Sorry if this is going to be a long post.

    I've been running OS 428 and a hybrid (428 based) since it was leaked without a hitch. 2 weeks ago, my 9550 rebooted on its own with a JVM ERROR 534 (I think it's the code because the screen just turned white with the error message and then rebooted on its own). He never started up properly then. The boot process dates back to about 3/4 of the way then the FMV of error appears again then re - start. A batt pull does not help.

    I wiped and loaded (loader.exe) operating system but when loading cod, it will again restart (reboot occurs when email.cod is loading). Tried several times and never loaded properly. I tried a load OS 428 right and it went well. When it is started successfully, I wiped the device and loaded the hybrid that I used before and everything was fine. When filtered 451, I upgraded and everything is fine - for a week!

    He has just restarted on its own again. I think with the same JVM error code! I'm unable to load the operating system using loader.exe. I even tried the "loader.exe /nojvm" switch does not. I wiped with Jl_cmdr or BBSAK, still no go. I then used DM BB. I loaded OS 320 and loaded correctly. Then I wiped and loaded the OS. It is not load or when it loads successfully, the JVM error still appears 3/4 of the way of the boot process.

    So when I load OS 320, it will load fine even after a battery pull. If I use OS 428 or 451 (both narrowed via Shrink-a-BONE), JVM error no longer appears when using the device or during the startup process. Don't forget not that previously I was using either straight (shrunken) 428 or 451 and a hybrid with no problems.

    I decided to try a derelict OS 451 and used the "Platform.alx" of OS 320 file. It works so far! Pulled the battery about 4 - 5 times already and loaded all my apps and no JVM error for about 2 days. I tried right OS 320 and he also re - will start on its own several times a day.

    It looks like completely wipe the device using BBSAK, Jl_cmdr and DM BB do not really completely clear the device.

    What could have caused the reboots and error JVM?

    EDIT: I tried to wipe the device using the erase option in the security options. The status bar has reached 100% and then restarting the device, the FMV of error pops up again and my 9550 goes back to a continuous process of reboot (even pulled the battery).

    EDIT: I tried the command line "javaloade.exe usb - cloth" to wipe the device and the OS loaded (using loader.exe /nojvm) very well. In the end, shippers said "updated successfully". The unit restarted and about 3/4 of the way - another jvm error! I removed the battery and wait a few minutes before re - insert and is currently the starting now... Will update what's going to happen...

    EDIT: Yes! It finally starts. Will try an another battery pull... 1/4 of the way in which the boot process - another JVM error! Pulled the battery and restart... Error JVM still about 50% in the boot process.

    EDIT: Can't get any OS to load using 'loader.exe' or 'loader.exe /nojvm. It stops during email.cod loading, then restarts. I was able to load OS 320 well via BB DM. problem is when I click on Options, error: "error starting net_rimm_bb_options_app: symbol KeywordFilteredScreen.» KeyChar "not found" is my watered device? Help, please. Thank you!

    EDIT: I tried to load the operating system by:

    -remove the battery.

    -Connect to the PC.

    -Command prompt: command /nojvm loader.exe

    -When it says connection to the device and the battery with a red 'X' icon is displayed, I re - insert the battery.

    -The operating system loads very well but are unable to properly start like 3/4 of the progress bar startup occurs an error in the JVM and then reboot again. Help!

    --> Was able to start properly after a second reboot not forced. Will try a battery pull... JVM error again... Will allow it to boot on his own w/o a battery pull...  Error JVM... Removed the battery, re - insert... Error JVM... allowed to start on its own... Error JVM!... I remove the battery and reinsert after 5 minutes... JVM error yet... What is it recharges without end?

    Just had my 9550's replaced and all of the good mother!

  • Impossible to download and reinstall the operating system after erasing HD

    Yesterday morning, my iMac won't start.  It was fine the night before.

    The progress bar reaches about two thirds to three quarters of the way to the end when the bar of progress disappears and I find myself with a gray screen. It does this by starting too.

    I followed the advice of Linc Davis at https://discussions.apple.com/message/21333265 (hash) 21333265 (Note - I can't find the symbol of hash on my keyboard key so if you if know where he is, please replace by in the link - oh (hash) and tell me where it's too please ;-)).

    I started the Revovery volume (now here actually).  Run Disk Utility/First aid finds no problem with MacIntosh HD (my boot drive). I can't find how to repair permissions.  The option no longer seems to be there. Reset NVRAM has nothing else that makes the iMac wonder my preferred language.

    I used download and reinstall OS option.  The first time I tried to re-download El Capitan, it took 15 minutes and 45 minutes to install.  Installation failed leaving me to the grey screen again.  I think that the Setup program itself was trying to restart the iMac when he got stuck in the same place I'm stuck.  I left it there for about six hours before I tried to restart manually.

    Tried to download the operating system again. This time, it was after using the recovery volume, select MacIntosh HD, by using erasing, then the option reinstall in THE.

    I did two times now.  The first time I tried 'Erase and re - install' the download bar has got to a point about a third of the way across, and then he stopped. Time of download bar gradually got more and more long, up to what I canceled it (when the display estimated download time is six and a half).  The internet connection was problematic, or the Mac had stopped download (similar to the earier progress bar).  The second attempt to delete and download, the download bar has not yet started to progress.

    My HARD drive has several volumes.

    1. The most important. My MacIntosh HD with OS 10.11.4 - El Capitan.
    2. The second, MacIntosh HD 2, is about 50 GB, a Mavericks installed on it.
    3. The third is 10.11.4 recovery volume.
    4. The fourth is another volume of recovery for the Mavericks.
    5. There is another called eDrive bulkhead.

    Apart from MacIntosh HD, with none of these volumes I problems in starting up (with the possible exception of the Mavericks resumed, that I have not tried to access all since the update to El Capitan).

    I used first aid utility disk several times, and no problems have been reported. I used the version of El Capitan permanently.

    I can't understand why, after erasing the MacIntosh HD to do it again, I can't get the iMac to download the MacOS and reinstall.

    A couple of clues-

    • After his clear utility drive always reports what is MacIntosh HD. (When I restart, the dialog "Select Start Drive" only shows the volume of the Mavericks and eDrive)
    • Disk utility also shows "Apple Disk Image/OS X Base System."  OF THE said that it is ejection. But this button does not work.  I suspect it's what might stop download me the installer and start again.

    I used e-drive to check the iMac and, in particular, the drive HARD; even performed a surface scan.  No problems have been reported.

    Your 2007 iMac is too old to download OS X, you need to install OS X since the recovery partition directly. If this does not work then Yes, something is wrong with your HD run Apple Hardware Test Mode Extended 2 - 3 times back to back, if errors appear which confirms what I said. You will need the original DVD that came with the computer in order to run it.

  • How do I know which hard drive contains the operating system in the Hp Pavilion dv7-4069wm? The upgrade.

    I think the upgrade of one of my hard drives (ea 320) in my HP Pavilion laptop dv7-4069wm for more storage.  I like to keep the drive that contains the operating system to avoid the hassle to make a copy, but I'm not sure which one that is. I have not replaced a hard drive before, and still less a double disc. Recently, I added more RAM and noticed that both hard drives looked the same. Can someone tell me how to know the difference?

    Hello

    Drive main HARD with the operating system is shown in the diagram at Page 49 of your maintenance & Service Guide.

    Kind regards

    DP - K

  • After the last update of the operating system and iMovie it seems I can't create a movie in the PAL standard. Can anyone help?

    After the last update of the operating system and iMovie it seems I can't create a movie in the PAL standard. Can anyone help?

    NTSC and PAL are analog standards and don't apply to the share or export settings in iMovie.

    It creates the same FPS and dimensions as your source file.

    What you trying to create?

  • Must the updates and hot fixs remain on the hard drive after having been loaded? Is the information provided in the operating system?

    Must the updates and hot fixs remain on the hard drive after having been loaded?  Is the information provided in the operating system? Or do the lonely stand.

    Original title: need for disk space

    Here are the official specifications of Toshiba for your PC...

    http://support.Toshiba.com/support/staticContentDetail?ContentId=638405&isFromTOCLink=false

    All interface PATA (IDE) connectors are a standard 40 pin.

    I know that there is no restriction on the mixture of ATA drives with different speed capabilities and no restrictions on what cable you use, whether 40 wire or 80 strand (but still 40 pins).

    Faster drives will only work at the speed of the slowest car on any cable and 80 strand cables are needed to make ATA66 or higher drives run at their native speed.

    In addition, no player can work faster than the motherboard chipset permits, in your case ATA66.

    My provider of trade has still some disks 3.5 '' PATA in stock, but these are becoming harder and harder to find. Indeed, it is possible that production has ceased and that suppliers are just exhausted stocks.

    I can certainly say that, when repairs this technology were more frequent, I never had problems with discs theoretically faster on the same cable as slower drives, nor by using faster on 40 cable strands discs. In fact, of many penny pinching manufacturers (some of them major) regularly used for the optical drive and hard drive on the same cable as the motherboard has two connectors, resulting in a decrease in performance on the disk hard (although most of the people would not have noticed the difference). Sometimes, the cable would be 40 strand (understandable if you are penny pinching) and sometimes the cable would be 80 strand (laughable if you are penny pinching because they are [were] more expensive).

    Pass your question about vacant below the sound card. Unless your text confused me, this space is for expansion cards no disk drives. Space that you reference is probably to the back of the PC. Hard drives are normally located toward the front of the dedicated PC "berries". Unfortunately, I could find no photo on the Toshiba site, and still less those internal.

    Tricky

Maybe you are looking for