BlackBerry 10 waterproof and shockproof standerd military case of jump?

Similar Questions

• SE connect Blackberry 10 Simulator and BBM works does not in the Simulator

  Hi all

  I use QNX momentics IDE for development and blackberry 10 Simulator.

  I use the simulator using VMWare workstation. A problem that occurs is that my Simulator is impossible to connect to BBM. Although the Internet is there on Simulator (checked with the browser on Simulator). As far as newspapers are concerned in the case of the blackberry simulators 9900 and 9930 counted out newspapers and event logs.

  But in this Blackberry 10 Simulator, I could not find newspapers where they are generated.

  Please tell me the location where in 10 blackberry Simulator logs are generated.

  Thank you best regards &,.

  Tushar

  for newspapers, check out this link

  http://supportforums.BlackBerry.com/T5/native-development-knowledge/debug-on-the-device-with-console...

  Please mark as solution if it helps

• BlackBerry software mixing and Issues resolutions, I've found. (Mix & link does not then BBID connection errors)

  I spent a good amount of time a problem resolved with the latest version of the link & Blend (Setup file: BlackBerryDesktopSoftware_B98.exe) and I wanted to share my findings in case someone else is having similar problems.

  I have already installed 1.2.3.56 link and it worked fine with my Q10, I used it for access to remote files, sync and backup and everything worked perfectly.  BBID was able to manage a disconnect, connect to the application without problem.  When the passport was released I had planned to make one, so I tried to upgrade to the latest version of link being bundled with the installer of mixture.  That's where all my problems started...

  After numerous installs / uninstalls the best I could muster with the new version was a mixture executable that would end itself quietly (no paper anywhere) in the second run.  Only way to really see in taskmanager was to select in the browser and press the Enter key (this he launched hundreds of times, I was doing this while using the process monitor to see if a log file has been generated anywhere, I didn't expect that it remains running) in addition the link sat at its screen for a LONG time , and when he finally start step 2/3 has never worked.  This is the step where you enter your credentials BBID and it records the link your account BBID, whenever I came to this page, that he had a yellow triangle and a button 'Retry' which obviously did not help much.

  The link always took to connect is because PeerManager.exe had the same problem that Blend.exe did, he would go for<1 second="" and="" then="" terminate="" quietly="" on="" it's="" own="" with="" no="" logs="" of="" any="" kind. ="" when="" link="" is="" started="" and="" running="" you="" should="" see="" the="" peermanager.exe="" process="" running="" in="" your="" task="" manager,="" and="" of="" course="" it="" woudn't="" stay="" running="" for="">

  I had the debuggers and IDA to take a look at what was going on and what I found I hope it will help someone without having to make all the steps of this.  For what it's worth I've also call in support BlackBerry when I get my passport and to inform them of the issue, I came across.

  The short end of history / TLDR. I had to do 2 things to get this version of Blend / link not working for me: create a white 'openssl.cnf' file on my hard drive and point to it with the environment variable "OPENSSL_CONF".  Second question was about a value in "HKEY_CURRENT_USER\Software\Research In Motion" that he did not, I removed this entire key during a re - install, and now the BBID authentication page correctly.

  I'll add some additional notes on what I found in the next post...

  If someone is curious about what I found while debugging, this is what lead me to the library & it is OpenSSL configuration problem...

  While I was debugging, I changed a routine jump and was able to get executables to start.  The PeerManager.exe and the necessary mixture changes the code runs successfully. (suspicious code block was in the mix file libeay32.dll PeerManager.exe with link/Blend)

  Looking at these two very similar code blocks shown a string of text before the jump to 'leave' called, showing that the code path that displays the text string "Automatic Configuration failed." called when an error occurred.  Interestingly enough it is then the functions available are currently walked initterm (an internal function in MSVCRT100.dll) and if the executable is never a chance to sign anything before this happens.

  Seeing that I had a similar error message in both applications indicated that it was a common library that has been compiled with both applications.  So I went to google to find pages associated with this error message...  Looks like this is a common problem with libraries and compiling of data, but I was focused on how to work around the problem and I finally tried one of the hotfixes sugguested I found.   Here's an old bug report on OpenSSL which indicates it might be a problem with the availability of openssl.cnf and is:

  https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=584911

  With the above information, I went to my system properties and set a System Variable, named "OPENSSL_CONF" and a value of "C:\openssl.cnf".  I then went to a dos prompt and make an empty file to this location using "COPY CON C:\openssl.cnf" (on the first line, I just recorded it with CTRL + Z) I then restored the binary no patches and low and behold, they worked very well!  Blend.exe started well to the top and Peermanager.exe were also still works just fine.  I couldn't BBID authentication window to come yet, but applications take at least now on my device and they actually open and created newspapers.

  MIX OF NOTES:

  Work with mixture problems not starting not leads believe me it is a problem compiling.  If I replace the OpenSSL library, it comes with (libeay32.dll and ssleay32.dll), with their installation package 1.0.1i binaries 'lite', Blend.exe starts fine.  Peermanager.exe can be fixed as well as libraries are statically compiled in this application.  Libraries have been restored for versions supplied with mixture once the environment variable has been confirmed for the problem.

  Auth BBID question:

  It was relatively easy to solve compared to the above question... Finally, there's something in my registry that has not been analyzed correctly as in 'Desktop.log' I found this article: ' | ERROR | 1. Rim.Desktop.Shell | 0 | Error to access the valid bbidprincipals. "I have exported and deleted everything under the 'HKEY_CURRENT_USER\Software\Research In Motion' key, restarted and voila!  I have now received a login for BBID.  Don't know which key it was that I didn't go back and add in each of the values I exported, but there was something in there, he did not like...

  Now I just need to see that this information back to the BlackBerry support group and eventually the Group of desktop software so that they make use.  When the Passport arrives I'll make sure to make a support call and get connected with them.  If anyone has any information to help get to the right people, let me know and I'll push it along.

  Otherwise, if this can help someone, give a post here so that we know that you are affected by this problem as well!  I still don't know which is more precisely on my system that requires him to need this empty openssl.cnf file.  A test VM, I installed it on had not and it works very well, so there is something else in my environment that causes this.

• Smartphones blackBerry DESKTOP MANAGER AND APPLE LION DOES NOT - COME ON BB: the SORTING

  There is a clear problem with BB desktop manager and the LION from Apple.

  In my case, the sorfware installation fails (even if you can find then on the applications). Then it is unable to download updates or fails to synchronize. It is a common and widespread problem.

  BLACKBERRY KNOW THIS PROBLEM FOR SOME TIME AND DO NOT REACH THEIR CUSTOMERS.

  They can feel it stop somehow customers migrate to the iPhone. This isn't the issue. More and more business customers (like me) are turning to Apple computers. If they (at least for the moment) that BlackBerrys are not suitable to great problems have, then the move will be also with our desktop phones. I don't want that I feel that the BB Torch is a business phone much better.

  THE UNWANTED PRESS AND YOUR SHARE PRICE ARE SURELY ENOUGH INCENTIVE TO GET THESE ISSUES SORTED OUT...

  PLEASE DO.

  Hey sjhtorch,

  Thanks for the quick response.

  I suggest to uninstall the BlackBerry Desktop Software, and once it is deleted.

  Search for the following files and delete these:

  /Library/receipts/blackberryvspdr.pkg
  /Library/receipts/blackberrydesktopmanager.pkg
  /Library/receipts/blackberryframeworks.pkg
  /Library/receipts/blackberryusbdriverint.pkg
  /Library/receipts/blackberryvsp.pkg

  / Library/Application\ Support/BlackBerry/BBLaunchAgent.app
  / Library/Application\ Support/BlackBerry/IPModemPasswordDialog.app
  / Library/Application\ Support/Blackberry/BBLaunchAgent.app
  / Library/Application Support/BlackBerry

  / Library/Modem Scripts/RIM IP Modem.ccl

  / Library/Frameworks/RIM_VSP. Framework
  /Library/frameworks/RimBlackBerryUSB.framework

  / Library/Preferences/com. RIM.vsp.plist
  / Library/Preferences/com. RIM. RIMBBVSP.plist
  / Library/Preferences/com. RIM. RimBlackBerryUSB.plist
  / Library/Preferences/com. RIM. RimLaunchAgent.plist
  / Library/Preferences/com. RIM. BlackBerryUSBDriverInt.plist
  / Library/Preferences/com. RIM. RIMBBUSB.plist

  / Library/LaunchAgents/com. RIM. BBLaunchAgent.plist
  / Library/LaunchDaemons/com. RIM. BBDaemon.plist

  / Applications/BlackBerry Desktop Manager.app

  /Users//Library/Application Support/BlackBerryDesktop/.
  /Users//Library/Preferences/com.rim.blackberrydesktopmanager.plist
  /Users//Library/Caches/com.rim.blackberrydesktopmanager
  /Users//Library/Preferences/com.rim.RimLaunchAgent.plist

  /System/Library/Extensions/RIMBBVSP.kext
  /System/Library/Extensions/BlackBerryUSBDriverInt.kext
  /System/Library/Extensions/RIMBBUSB.kext

  Empty the trash, and then restart the Mac.

  Download BlackBerry Desktop Software from www.blackberry.com/desktop and try to install it.

• BeWeather BlackBerry Smartphones downloaded and accidentally deleted, but paid!

  I downloaded BeWeather for my curve, paid for it and then using it, but because I was using the 'Free' app and so I removed it, thinking that I would receive the upgrade application which has never so I think that the 'free' app.lication was the paid juast one, with a free 3 day trial.  However, given that I deleted, even though I already paid for it, I can't can't seem to be able to re - download!  I can't get one answer out App World or Bellshare gmbh regarding this problem.  so, basically, I think it's my fault to remove, but why doesn't app-world let me not the re-upload.  * beep *, at this rate, I even would pay for it again because it's on sale for only $4.99.  I'm SO angry

  Hi and welcome to the Forums!

  First - slow down the... I know you're angry and frustrated, but do you know where this can lead when dealing with technology issues...

  To reinstall your applications, please follow this section of the AppWorld user guide:

  • http://NA.BlackBerry.com/eng/deliverables/7268/re-install_an_item_on_a_different_device_643962_11.js...

  For more information, registration keys, see this KB:

  • http://www.BlackBerry.com/BTSC/KB18646

  In some cases, it was discovered that updates (from got AppWorld apps) require additional steps in order to install the update. If the update will not install, please try this:

  1. Homescreen > Options > Advanced Options > Applications > highlight the app > BBKey > delete
  2. AppWorld > MyWorld > Login > highlight the app (if she shows at all, in any State) > BBKey > delete
  3. Use your PC (via the mass storage Mode) or your BB (via Media > BBKey > Explore) and find all references (folders, files) to the app delete everything you find. Search the memory of your device and your press card as well.
  4. Use the link to user guide AppWorld above for re - install the app - then predict a new activation/registration key

  See you soon!

• I have a drive mapped to a Server 2008 all the hours his loses drive mapping and the backups in case of failure

  I have a drive mapped to a Server 2008 all the hours his loses drive mapping and the backups in case of failure

  I get the error message is could not reconnect account currently disabled mapped drive .so I remap the disk with the same user name and password and it reconnects

  * original title - Networking file sharing file sharing file sharing file sharing Fileshare discovery network shares mapped shared part readers *.

  Hi SCS PCs

   

  I would recommend checking the Microsoft TechNet community. Please visit the link below to find community which will support ask you in the right direction for the linked domain questions.

  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

   

  I hope this helps.

• BlackBerry Z10 z10 and help link

  Greetings all long time in love BB, recently bought for the new z10 and here are my problems

  1 drivers moved or not is found for phone

  2 download link and uninstalled and reinstalled several times, cleaned of any enttries to register, I get the error message unalbe to sign in blackberry ID make you that im connected to internet disabled both firewall and antivirus stilll no luck, any help would be greatly appreciated

  Solved CONNECTED COMPUTER ADMINISTRATIVE MODE uninstalled, AS LINK AND ALL RELATED to BLACKBERRY AND WENT through REGISTRY AND DELETED ANY REGISTRY ENTRIES RELATED to BLACKBERRY NEW INSTALLER AND BOOM FACT IT ME NO THANKS you Admin

• How to implement by scanning image for Blackberry 5.0 and later version OS devices?

  Hi all
  I need to develop the functionality of drag in an application. To do this, I added five bitmapfield in five different verticalfield Manager and these five verticalfiled have been added in a horizontalfield with the Horizonatal Scroll property manager. And try to implement features of shot using Touch events. Code below works for Blackberry OS 5.0 devices, but its does not work in Blackberry 6.0 and later OS devices.

  protected boolean touchEvent (TouchEvent message)
  {

  try {}
  int x = message.getX (1);
  int y = message.getY (1);

  int eventCode = message.getEvent ();
  if(eventCode == TouchEvent.Down)
  {
  DX = x;
  DY = y;
  }
  Another yew (eventCode is TouchEvent.UP)
  {

  UX = x;
  UY = y;

  disX = Dx - Ux;
  disY = Dy - Uy;

  If (disX > (Display.getWidth () / 3) & this.index)<>
  {

  If (this.index<>
  This.index ++;
  vfmImage [this.index] .setFocus ();
  System.out.println ("disX:" "+ disX +" different: "+ (Display.getWidth () / 3) +" Index: "+ this.index);

  }

  ElseIf (disX < display.getwidth()="" -(display.getwidth()="" +="" display.getwidth()/3)="" &&="" index=""> 0)
  {

  if(this.index>0)
  -This.index;
  vfmImage [this.index] .setFocus ();
  System.out.println ("disX:" + disX + "different:"+(Display.getWidth()-(Display.getWidth() + Display.getWidth () / 3 ")) +" Index: "+ this.index);

  }
  on the other
  {
  if(index==0)
  {
  vfmImage [1] .setFocus ();
  }
  on the other
  {
  vfmImage [this.index - 1] .setFocus ();
  }

  vfmImage [this.index] .setFocus ();

  }

  }

  }
  catch (System.Exception e)
  {
  Dialog.Alert ('catch');
  e.printStackTrace ();
  }
  Return super.touchEvent (message);
  }

  Thank you
  Sylvie

  Hello

  Use this api
  http://www.BlackBerry.com/developers/docs/5.0.0api/NET/rim/device/API/UI/extension/component/picture...

  Kind regards
  pp

• Differences between the version of BlackBerry Device Software and platform. Help, please...

  Hi guys!

  I'm really confused... Help, please!

  We have developed applications for our customers. We tested with our BB8700 and it works fine.

  We used JDE4.2 for development... and we think that it will work on v4.2 based handsets.

  But our customers wrote that it works on v3.7. Why? Is this possible?

  I looked at the information about my 8700 device and then noticed: v4.2.1.107 (platform v2.3.0.84)

  -What are the differences between the version of BlackBerry Device Software and platform?

  Possible customers spoke of version 3.7 of the platform?

  There is a list of the devices, where we can find the version of BlackBerry Device Software by BlackBerry device model?

  Or where we can find information about the models of devices that will support our application?

  Thanks in advance!

  AFAIK there is no version 3.7 platform.

  Customer talking about the OS version.

  So, if they have the device OS version 3.7 you must use JDE JDE 3.6, 3.7 or older.

  Or take updated device OS if the necessary software is available.

• BlackBerry Smartphones BlackBerry message memory and SIM card are full! Please delete some SMS messages.

  Hello

  typical - just that I was looking to upgrade, I get the following message on my Torch 9800:

  "BlackBerry message memory and SIM card are full! Please delete some SMS. »

  There is a lot of space on the card in the device memory and press. I have deleted many texts and have removed the battery (several times), but the error keeps coming back.

  I am able to text but can't seem to receive - although copies of text messages that I send continue to be saved. I'm having no problem with other forms of e-mail (for example, WhatsApp, Twitter).

  I looked at 3465 Knowledge Base, which advises to uncheck the option "Leave Messages on SIM card", but this has been disabled throughout. (I checked it and saved out of curiosity, which allowed me to receive text only test that I then just sent myself, but after the error message is returned and no other text would come through...) I came back to this area being disabled).

  Any help to fix this would be greatly appreciated.

  When you say you deleted text messages, how have you deleted and how do you think that you have?

  I suggest making a backup with BB Desktop Software. Then, you can use it to do a selective removal of just the basis of message text and see if you can receive messages after that. If you did the backup you can always restore text messages on the device if you want to, although he will crush all new messages on the device.

• BlackBerry Smartphones completely remove the BlackBerry App World and how?

  Can I completely delete BlackBerry App World and how?

  Hi lion 775

  Do you mean that you want to uninstall App World from your device. If it is then for BlackBerry® Device Software 5.0, go to Options >Applications > and then select third party. Then uninstall App world from there.

  KB10040 How to view or delete applications on a smart phone BlackBerry. 

   

  Prince

  _______________________________________________________________________

  Click 'Like' If you want to thank someone.

  If problem resolves mark message (s) as a 'Solution', so that others can use.

• BlackBerry Smartphones Blackberry "BOLD" username and password?

  Hello

  Where can I find my Blackberry ID username and password?

  Thank you!

  Hi LiezDiesel

  If you have not created a BlackBerry® ID, you can go to www.blackberry.com/blackberryid to create a!

  Thank you

• BlackBerry Smartphones BlackBerry Internet Service and Blackberry Enterprise server: not connected

  Hello!

  I am currently a user of the Blackberry Curve 8520 and my carrier is FONIC Germany. After trying a few applications, such as the blackberry Messenger or blackberry app World and my email accounts, I discovered that none of them have worked, although the internet explore normal worked as usual.

  After doing some research, I spotted the problem:

  BlackBerry Internet Service: not connected

  BlackBerry Enterprise Server: not connected

  After calling my provider, they told me that they are unable to connect to the Blackberry Internet Service... They had really no idea what I was talking!

  Is there anyway that I can connect my Blackberry to the service without the intercession of my career?

  Thanks in advance!

  Cervezaduff

  The service is provided by your operator, then Yes, the only way to activate your blackberry completely is to change carriers.

• Hello from blackBerry Smartphones - I downloaded Blackberry Apps World and never...

  Hello - I have downloaded Blackberry Apps World and every time I open it it loads then the screen freezes at the homepage and I have to do a soft reset. I downloaded a few times and it happens every time. Also, I got the new 8900 curve and meets all requirements. Your help be appreciated you. Kind regards

  Hello!

  Generally, the first time you launch AppWorld as the first time you go to a category, there is a large amount of data to download. Patience is the key. I found that wait at least 5 minutes for each category of charge completely has helped make his later use more fluid and faster... but the first time was very very slow. It's just the way it works now.

  If this does not help, then please come back on these forums (http://supportforums.blackberry.com/rim/) and create an account so that we can provide direct assistance.

  See you soon!

• BlackBerry smartphones I currently own a Blackberry Curve 8900 and I can't...

  I currently own a Blackberry Curve 8900 and I'm unable to download the App World. I tried using a t-mobile data plan and my device is also consistent with other requirements. However, I now get the message axError.gif on my computer trying to. On the blackberry browser, I get the message saying that he does not meet the requirements. How this can be solved?

  Hello!

  Please be positive that you meet all four requirements - you may need to contact your carrier to be sure 100%:

  http://NA.BlackBerry.com/eng/services/appworld/download.jsp#tab_tab_system_requirements

  If this does not work, then please come back on these forums (http://supportforums.blackberry.com/rim/) and create an account so that we can provide direct assistance.

  See you soon!