BlackBerry 8820 Smartphones turn does not on

Similar Questions

• BlackBerry Pearl Smartphones turn does not on

  So I think that I unplugged (by chance) while pearl was connected to the computer program BB.  When I have the phone went black.  Now, when it is plugged into the computer, it is not recognized as a device.

  My question is: is there hope.

  Short of reloading or something he even does not record when it is plugged.  So I asked some 'grumpy' help me please if they can.

  Thanks a lot for any help

  Remove the batteries, wait a minute and return the battery.

  And also visit this link:

  http://CrackBerry.com/BlackBerry-101-lecture-12-how-reload-operating-system-nuked-BlackBerry

• BlackBerry Storm Smartphone keyboard does not

  So here's my problem: my keypad does not work. When I push a number nothing happens. The works of 0 and when I hold down the 1 goes to voicemail. When he goes to voicemail, however, where the numbers should be there are letters. If I have someone in my contacts, I can call but I can't dial their number. Everything else on the phone works. Email, SMS and browser all work to them. It is only the most basic function that will not work. I called Verizon and they helped me to restore and then an update, but that did not help. I went to the Verizon store and they said that all they can do is a clean cloth and restoration, the same thing I did over the phone. I then took it to Cell Phone Repair (CPR). They said that they have never seen him. And if they have ever seen, then it must be really screwed. Help, please!

  Hello

  I assume that you have already performed a traction battery without effect, correct? If this is the case, then I'll recommend a more radical action.

  First of all, start by saving the information on the device using the BlackBerry Desktop Software and then disconnect your phone from your computer. Then, download and install the operating system on your computer from here: http://vzw.smithmicro.com/blackberry/download.aspx.

  Once you have your operating system installed on your computer, download and install a program called BBSAK from http://bbsak.org. After installing the program, plug your phone and open BBSAK. When you are prompted, type your BlackBerry password (if you do not have a password, just press ok). The PIN of your BlackBerry should then display to BBSAK. At this point, click Wipe Device. This will delete all data and the operating system of your phone and must leave an error 507 on your phone. Then, click Load OS. Now, this will open the file from the BlackBerry charger that allows you to reload the OS of your storm. Just follow the steps and then once your storm has restarted, you can open the BlackBerry Desktop Software, and restore your data. If you want to be really sure, just do a selective restore of the info that you need (messages, contacts, calendar, etc.). That you will protect, just in case the problem is in part due to a bad database.

  You should now be back running. If not, let me know, but if it's a software related issue, this should solve the problem.  As a final note, this will remove also all your third party apps, you'll then need to re-download those.  If you can, however, delay on that until you know for some that the problem has disappeared.

• Flight of blackBerry 8330 Smartphones, Desktop does not synchronize with the new phone

  A kind person recently broke my window of the car and took my 8330.

  I regularly synced my old phone using Desktop Manager.

  Switch device Wizard wants my old 8330 connected to synchronize new 8330.

  Of course, I don't have the old 8330.

  I don't know that I'm missing something here.

  Can anyone offer assistance?  Please, I beg you!  I'm dying here.

  Thank you!

  So good news.

  Connect your current device to the USB > PC.

  Open Desktop Manager > backup/restore > advanced.

  You should see the IPD backup on the left pane information and the information of the current device in the right pane.

  If the left pane does not, above this window, choose file > Open and navigate to this known IPD file. Load it.

  Now, you can choose one by one or all THE items in the list to transfer to the new device. Highlight each database you moved to the new device and click the right arrow environment to move these data.

  Follow the prompts which if ensuits and you'll be good.

• BlackBerry 9300 Smartphone trackball does not

  does anyone have a miracle solution?  Thank you

  Hi stevenb_50

  You can try a clean OS reload to see if that helps but first make a backup of your device using the BlackBerry Desktop Software then refer to this Knowledge Base:

  KB11320  : How to perform a reload of the own software BlackBerry Device using BlackBerry desktop software for windows.

  If above method fails, then you will need to contact your carrier or Service provider and replace the Trackpad might solve the problem.

   

   

• BlackBerry phone smartphones turns is not on!

  Hello

  tried soft and hard reset [ruled out the battery for 10 seconds] turns on when I put the battery in the led red LIGHT, I tried pressing the button while the led lights, but no response. I tried to leave without pressing the button for a few minutes, but that doesn't work anymore.

  I also tried the shf, caps + del [hold their all at the same time], but it did not work as well!

  outside, ideas, suggestions?

  First of all,
  Leave the appliance to charge 2-3 hours and then, always toujours relie connected to the USB cable, remove the battery from the camera a few seconds and plug it back. If it starts - let - the charges to 100% (check the Options > status for the percentage).

  If this is not the case, start after a few hours, please post back here.

• BlackBerry Smartphones appworld does not work after software update

  It does nothing when I click on the icon of the appworld, Ive has deleted the appworld in application management, reboot my device and install again. And still will not work. I did it several times and the appworld icon still does not work. Pls help. I recently updated my OS5 OS6 at 9300.
  Thank you!

  Hello yhayen03

  Please refer to your other post http://supportforums.blackberry.com/t5/BlackBerry-World/App-World-does-not-open/td-p/1782151/page/2

• BlackBerry Storm 2 Smartphone - keyboard does not!

  In Blackberry Messenger, the keyboard does not appear on the Storm 2. When you are in a group discussion or individual cats the keyboard does not appear when you click inside the text box or choose to see the keyboard in the menu.  I heard this from a few other people I know who have the Storm 2. It's very frustrating. Help, please!

  khendr wrote:

  When you are in a group discussion or individual cats the keyboard does not appear when you click inside the text box

  This is a bug in the operating system used on and is a problem known to be corrected.

  While in a group conversation, click to start a new Chat and the keyboard is displayed. You cannot use the existing cat. This is the workaround.

  But you do whenever you want to get into this cat.

  Meanwhile, I know, it was fixed has yet to release. Be patient, or downgrade your OS for now.

• Smartphones blackBerry 9900 data Plan does not work!

  Hi, new here, great site!

  I'm from Canada, with Koodo and bought a unlocked 9900 opportunity, my neighbor via a Classifieds site, and as much as I know it was his business phone.
  I wiped it it clean and improved the operating system to 7.01

  I noticed that the previous service logo remains still (Rogers) during boot-up/shutdown, hmm, OK whatever he is working with Koodo.

  I called Koodo to allow data, but nothing works. I called them and they told me to enter "bb.koodo.com" in the APN field with no username and password. Then to save the host Routing Table (he told me that he registered very well) but I did not receive a message. Also, we have removed battery and tried everything again. It still does not.

  It is H + at the top right of the screen, but who has always been there.

  She said that maybe the phone was restriction IP since I bought it used, and maybe BB Swiss Army tool could help me get off, but she didn't know how. So I downloaded and pushed some buttons (more precisely remove COD) and really messed up my phone... lol

  Just reinstalled OS7.01 once again and fortunately had a fairly recent backup.

  Suggestions for making data work, or do I need a new phone?

  Hello and welcome to the community!

  Serious9900 wrote:

  bought an unlocked 9900 used my neighbor via a Classifieds site, and AFAIK it was his business phone.

  Let's start there, because who can be tricky depending on what exactly is meant by "business phone". Reference:

  • Article ID: KB05099 Steps to take before selling or after the purchase of a used BlackBerry smartphone

  Many of the steps can only be carried out by the seller... for example, if the prior carrier still has a BIS account allocated to that specific device, so no other carrier will be able to create a BIS account for her, and a BIS account is required to use wisely. As a general rule, a carrier will come out only the BB from the account when the real account holder made the request... and you will not if this situation applies.

  In addition, if the device has been activated BES, you need to follow additional steps. Reference:

  • Article ID: KB30076 How to check for an it on a BlackBerry smartphone policy

  If there is an IT strategy, then there are a special method, you need to remove it, but it will be successful if the BES server, to which the device has been set already has the removed feature of it... you may need to ask the previous owner about it. If this BES server was deleted, you can use this method to clean up the it policy:

  • Article ID: KB31291 How to reset a BlackBerry smartphone to factory using BlackBerry Desktop Software Settings

  It is necessary to use this exact method... refer:

  • Article ID: KB16307 Actions performed by the BlackBerry smartphone during the removal of the user stored and application data

  Now, with all these preliminaries of the road...

  Serious9900 wrote:

  I noticed that the previous service logo remains still (Rogers) during boot-up/shutdown, hmm, OK whatever he is working with Koodo.

  As you guessed, it's irrelevant. BBs are still originally designed for a specific carrier... and some of these contractual carriers with BB to place a splash screen of starting the device ROM, that can never be changed. But, it does nothing other that that unit was built for this carrier... but as long as all other things correctly, it is not serious at all.

  But, to be clear, when you say "it works on Koodo", I guess that's your voice services? And are all now, you must operate your data services? If telephone services do not work correctly on Koodo, then it is useless trying to get data services going.

  Serious9900 wrote:

  I called Koodo to allow data, but nothing works. I called them and they told me to enter "bb.koodo.com" in the APN field with no username and password. Then to save the host Routing Table (he told me that he registered very well) but I did not receive a message. Also, we have removed battery and tried everything again. It still does not.

  But now say you "nothing works"... should I continue to assume this are information specific to the data, and that telephone services continue to operate properly on Koodo? Sorry for being blunt, but clarity is critical or waste us time on unnecessary things.

  When you say "he told me that he registered very well", which means exactly please? This means that he said something like 'Check pending', 'Record sent' or some other message popup? Once again, here the clarity is critical. If that's what you saw, then indeed it is not registered correctly. Rather, he made the application very well... but until the enrollment message arrives in the Messages application, then the intervention is required since the data network of the carrier did not and until it nothing for the data will be working.

  Serious9900 wrote:

  It is H + at the top right of the screen, but who has always been there.

  Upper case H +? Once again, just double check, since if she was tiny, that it would mean something completely different from that of capital letters. Top of case, this is what it must be.

  Serious9900 wrote:

  She said that perhaps the phone restriction IP since I bought it used

  I don't know what she thought about it. May be restriction of BES and if the above process I gave you can purify that.

  Serious9900 wrote:
  and that maybe BB Swiss Army tool could help me to remove, but she didn't know how. So I downloaded and pushed some buttons (more precisely remove COD) and really messed up my phone... lol

  Never good to a few buttons when you don't know what you do... I don't remember if BBSAK is able to remove political or not, but it can do a very good cleaning.

  Serious9900 wrote:

  Just reinstalled OS7.01 once again and fortunately had a fairly recent backup.

  And that could be part of your problems. If, for example, the device has one IT political edge, while part of a full process... which means that even if you happen to clean off, a complete restoration simply will return to the instrument, turning to your right back to where you started backup/restore. Instead, to do only a partial backup or restore, and more precisely to avoid data bases that have to do with THIS, political, business or something similar... the conservative approach is to only to backup/restore of critical databases you need (for example, contacts, calendar) and manually reconfigure the rest. Remove a policy is a tricky thing.

  Serious9900 wrote:

  Suggestions for making data work, or do I need a new phone?

  I think you have enough to start on top. Another question about whether Koodo, however, is if their network is configured to auto-fill your specific with entries HRT device model and service book. If their network is not, while actually explains everything. No carriers configure their network to support all models of BB... each one chooses a subset of the model numbers of BB and configure their network accordingly. But trying to use a model number BB on a carrier network that is NOT configured for this model results in number exactly what you live... their network will not automatically grow some HRT and SB entries on your device because their network does not recognize your device as a model BB number taken in charge.

  Looking at a reference that I can find, it seems that Koodo is configured for the 9360, 9300, 8530 and 9790. But not for the 9900. Now, is that with a proverbial grain of salt... that reference does not necessarily mean that the network of Koodo is not configured for the 9900, it's just an indicator that is not. Koodo can only tell you that answer for you.

  Good luck and let us know!

• BlackBerry Smartphones Blackberry 8520 wiped and does not show error 507

  Hi, I recently wiped my blackberry 8520 OS with BBSAK and started to install another OS, in the process, the USB cable somehow has been disconnected and installation has failed. Now the phone just to start, turn on for about 3 seconds shows nothing and then turns off. It does not show same error 507. Help, please

  Hello and welcome to the community!

  You may need to use these tips:

  • KB10144 How to force detect the BlackBerry smartphone using the Application Loader
  • KB27956 How to recover a BlackBerry smartphone from any State
  • http://CrackBerry.com/BlackBerry-101-lecture-12-how-reload-operating-system-nuked-BlackBerry

  Good luck and let us know!

• BlackBerry Blackberry Curve 8520 Smartphones - UPDATE DOES NOT WORK!

  Hello world!

  I am having trouble with my Curve 8520.

  A couple of days it worked perfectly well, and then the screen went white. It was not dropped or anything, he was in charge.

  I had a reading around forums and found that the battery could be a problem so I bought a new battery C - S2 authentic. Turned the phone and I came to one thing to display updated with a square circle and a triangle.

  I've connected my phone to the pc and tried to update, but I do not see at all times when it comes to 'reconnect to jvm...

  What should I do? Phone does not come on and I can't access anything whatsoever?

  Assistance requested as soon as POSSIBLE!

  THANK YOU IN ADVANCE!

  Hello and welcome to the community!

  Try the different methods in this Constitution:

  • http://CrackBerry.com/BlackBerry-101-lecture-12-how-reload-operating-system-nuked-BlackBerry
  • http://www.BlackBerryFAQ.com/index.php/What_to_do_next_if_Jl_Cmder_will_not_connect_and_wipe
  • KB10144 How to force detect the BlackBerry smartphone using the Application Loader
  • KB27956 How to recover a BlackBerry smartphone from any State

  Good luck and let us know!

• BlackBerry Smartphones Resettofactory does not BES

  The Bold 9900 was used with BES. Now, I like to use without BES, on a pop account.

  I used Desktop to factory. I used LOADER.exe compand line at /resettofactory.

  Nevertheless, after it restarts, and I try to add the POP account, I get.

  Accounts activated

  No active account

  Account activation

  To activate your business account, enter

  information provided by your system

  Administrator in the fields below.

  E-mail:

  Activation password

  View the password

  Activate

  Me doesn't appears not be factory because there is no place to add a pop account without activate BES.

  I just need to go to Yahoo, without BES. Any suggestions?

  Sourcery says:

  I also did a wipe of security directly on the phone. No joy.

  According to KB21918 and KB18998, you should eliminate BES.

  Actually no, both give a re-read, especially words such as these:

  The factory reset just as the option wipe Handheld performs from the BlackBerry smartphone, with a few minor differences.

  • Wipe Handheld - The wipe Handheld option is made directly on the BlackBerry smartphone (see KB02318 and KB14058). This option removes all BlackBerry application data (emails, address book entries, calendar of events, etc.) and allows the removal of installed Applications and the content of the press card.
  • Reset to the default factory - data Application will be withdrawn and HE are so political. Third-party programs will be NOT affected by this operation. They will remain intact.

  ResetToFactory, via the charger or desktop software, is the method to remove an it strategy. Reference:

  • Article ID: KB16307 Actions performed by the BlackBerry smartphone during the removal of the user stored and application data

  Now, PAHO situation... which I think is that the device has been associated with BES before and is no longer. Once the it strategy is removed, then the unit must be ready to accept the carrier BIS account. You can check if the it policy has been removed through this:

  • Article ID: KB30076 How to check for an it on a BlackBerry smartphone policy

  If the company removed and only is offered for the e-mail configuration, then the problem is that the unit does not service the carrier BIS.

  To use the exclusive services of BB (including the ability to Push email, BBM, etc), you must have an adequate data of your carrier plan. Carriers BIS (BlackBerry Internet Service) host for their BB users. In general, BIS is not available through generic data plans. Several ships make stop what is needed the Blackberry data plan. Whatever they call it, it is the carrier that delivers BIS users of BB - contact - the for assistance. Once you have an email Push-enabled compatible BIS data plan on your BB (fees regardless of your carrier will charge, btw), your exclusive services BB will work (for example, you will have a staff/Internet Email added to the email Setup Wizard, your BBM will work, etc.).

  With hundreds of carriers in the world, each with dozens of different data plans it is impossible to say that any plan service could actually expressly provide for. Only carriers can answer this question. The best thing to do is to decide what services you want and then talk to your carrier about obtaining a data plan that allows what you want (to them).

  Good luck!

• Smartphones blackBerry device software upgrade, does not (Bold 9930)

  Bold 9930, Verizon,.

  Everything was going well 5 hours ago. Backup and synchronization with Desktop Manager and everything was good. I clicked on the 'Device upgrade' link. He me everything first download and install the new Desktop Manager software. This seemed to work properly. Then it downloaded the new software device and conclusive to upgrade of the unit.

  7.1 bundle, 2705 (v7.1.0.991 platform 5.1.0.678)

  The Setup program indicates that the new software has been installed, and then it seems to want to reboot the device. The device never returns, ends with an App error 606.

  I loaded the cool device software, without change. Removed Software Desktop, loaded fresh, then loaded a fresh device software, without change.

  I tried to load my old device software but the Desktop Manager will not allow him.

  I reloaded software device 3 times, always the same behavior, always the same error at the end.

  I'm out of ideas.

  Any help?

  Hello and welcome to the community!

  brunostyle wrote:

  I tried to load my old device software but the Desktop Manager will not allow him.

  This bit is quite unusual... done correctly, you can force any OS on your BB package as long as it's your exact model number. So I'm not sure if you're really using all the good stuff... so, even if a lot of this will be redundant, please examine carefully for subtle tricks do you need to... done correctly, this can heal the situation. But any errors on the way (not ignored, stage not completed correctly, etc.) invalidates the whole process and translates the automatic process of support and limited to only the OS packages currently supported by your specific carrier.

  The easiest way is, on a PC (you can not do on MAC):

  (1) make sure that you have a current backup and your BB complete... you can find the instructions at the link in my auto-sig below.

  2) uninstall all the BB OS packages from your PC,

  (3) make sure you have the BB Desktop Software already installed

  • http://us.BlackBerry.com/software/desktop.html

  (4) download and install on your computer, the BB OS package you want:

  • http://us.BlackBerry.com/support/downloads/download_sites.jsp
  • If all you want are the levels of BONE, it is first sorted by carrier - the carrier supports, your search will be fast. However, some carriers are much slower than others to release updates. To really get the package up-to-date OS for your BB, you need to dig through and find all businesses that support your specific model BB and then compare the BONE levels they support.

  5) remove all copies of the SELLER on your PC. XML... There will be at least one and maybe 2, and they will be located in the same way or to (it changes based on your version of Windows) these files:

  • C:\Program Files (x 86) \Common Files\Research In Motion\AppLoader
  • C:\Users\(your Windows username) \AppData\Roaming\Research In Motion\BlackBerry\Loader XML

  6 (a) to change your level of BB OS installed (at level or lower), you can run the Desktop software and connect your BB... the software should offer the operating system package you have installed on your PC.

  6 (b) or, for recharging your BB OS level installed as well to change, work around the Desktop software and use the CHARGER. EXE directly, through step 2 in this process:

  • http://supportforums.BlackBerry.com/T5/BlackBerry-device-software/how-to-reload-your-operating-syste...
  • Note Although written to "recharge" and the storm, it can be used to upgrade, downgrade or recharge any BB device model - depends on the operating system package you download and install on your PC.

  If, during the process of 6a or 6 b, your BB has an error '507', simply unplug the USB of the BB cord and reinsert it. do nothing else... This should allow the installation to continue.

  You can also study the use of BBSAK (bbsak.org) to perform the wipe what he is capable.

  You can also try the "skeleton OS Reload procedure" in an attempt to circumscribe the precise causal element:

  1. Load your OS "bare bones"... If everything is optional, do not install it.
  2. If the behavior is immediately, then try another OS with step 1
  3. If the behavior does not immediately, then run for as long as necessary to make you to be sure that the behavior will not occur.
  4. Add one more thing - no matter how tempting, one.
  5. If the behavior does not immediately present, and then runs for long enough to be sure he won't have the same problem
  6. Repeat steps 4 and 5 until all things are responsible or the behavior presents

  When the behavior shows up, you know the culprit... the last thing you have loaded.

  If the behavior doesn't re-present, then you know that step 1 or 2 cured it.

  If the behavior has anything, then you have probably a problem of material level for which no amount of OS or software can heal.

  You may also use these tips:

  • KB10144 How to force detect the BlackBerry smartphone using the Application Loader
  • KB27956 How to recover a BlackBerry smartphone from any State
  • http://CrackBerry.com/BlackBerry-101-lecture-12-how-reload-operating-system-nuked-BlackBerry

  If you are on a MAC, you are limited to only your sanctioned carriers OS packages... but can still use any level they currently have to sanction. See this procedure:

  • KB19915 How to perform a clean reload of the smartphone BlackBerry using BlackBerry Desktop Software application software

  Good luck and let us know!

• BlackBerry Smartphones youtube does not not on 8320

  I bought used 8320... his t-mobile! When I bought used, and youtube worked! I think it was company cell phone with the it policy... I update its OS several times when I bought when a month ago when I refreshed his BONES... m.youtube.com stop working! I think that the video streaming is stopped working!

  whemever I click on the button look, nothing appears, not a single error!

  Please help me with this =]

  current OS: 4.5.0.81 (108)

  Hello and welcome to the community!

  First, take a step back...

  • KB05099 Steps to take before selling or after the purchase of a used BlackBerry smartphone

  Ensure that all stages of the seller were already conducted, including correct cleaning of the BB of the it policy. From what you posted, which has not happened (the operating system does not remove the it refreshing policy).

  • KB18998 How to reset the factory default BlackBerry smart phone

  Good luck and let us know!

• BlackBerry Smartphones Opera4 does not work on my Storm 9500

  I installed on my Storm 9500 OM4, but when opening it shows ' the Mini Oper application attempted to access a network connection to low altitude. Here afford that?' twice and then the application does not connect to the internet. The phone displays 'edge' only. I don't have a BIS in my country.

  Hello

  One thing you left was how you have responded to the message you received. Did say you Yes or no? Twice?

  In any case, it may be that your BB, which I assume that you have purchased 2nd hand, did not properly prepare for your use by the previous owner. Please see the bulletin:

  • KB05099 Steps to take before selling or after the purchase of a used BlackBerry smartphone

  In addition, it is possible that they had this BB associated with BES and did not remove the it policy... Review:

  • KB30076 How to check for an it on a BlackBerry smartphone policy

  Further still, your voice-level services work correctly? And you can find a WiFi network to see if Opera works that (as a test please)?

  Please let us know the results of your review of all the foregoing, accurately.

  Thank you!