BlackBerry BB Leap Leap does not turning on

Just 24 hours after leaving my Z30 I turned off my brand new JUMP to apply a screen protector flim and subsequently the devive NOT turn back on... filled with dead... not a wink (fully charged levels) I'm naïve about what might had happen... Any ideas? TKS

Finally considered return on what happened... lla Leap has not turned... I sent back... tks for support.

Tags: BlackBerry Smartphones

Similar Questions

  • Encryption of blackBerry Smartphones memory devices does not turn off

    I want to use blackberry protect but since I got my phone there a small lock next to the checkbox to disable encryption so I can't turn it off. I upraged to os7.1, but the problem remains. Can someone help me?

    Hello and welcome to the community!

    I'm not sure about the correlation between the encryption and the BB Protect... you jumped from one to another at whiplash speed in your post... do not understand.

    But, nevertheless, if encryption is active and locked, then the most likely answer is that your device has a COMPUTER Board policy that requires encryption is active. You can check the existence of a COMPUTER policy via this method:

    • KB30076 How to check for an it on a BlackBerry smartphone policy

    If you're on BES through your company or otherwise, you have to stop now and talk to your BES admins, because they are in control of it on your device policy.

    If you are not on BES, then somehow you got a device that once stood on BES, and who gave you sanitized it not properly before give you the device. You can now clean, but it will be totally destructive. Therefore, please begin by reviewing the Backup link in my sig auto on this post and make sure you have a full and complete backup.

    Once you have a backup, you can do this to clean your BB of the it policy:

    • KB31291 How to reset a BlackBerry smartphone to factory using BlackBerry Desktop Software Settings

    Subsequently, when you restore, DO NOT make a full restore... rather just do a selective restore of the databases you need (e.g., contacts, calendar, messages, etc.) and more precisely to avoid any database that have nothing to with COMPUTER policy, business, etc.. If you restore those, they will dutifully restore COMPUTER policy and you will be right back where you started.

    Good luck!

  • BlackBerry smartphone WI - FI does not turn off

    Just got a new BB Curve 9360. I keep trying to turn off WIFI to save the life of the battery, but when I click on WIFI in the management area of the connections it starts spinning turns back on after a few seconds. It is a kind of automatic connect feature that turns the WIFI if it detects a signal?  If so where can disable this function?

    Hello and welcome to the community!

    What you describe is quite unusual... so... each time a random strange behavior or slow creeps, the first thing to do is a battery pop reboot. With power ON, remove the hood back and remove the battery. Wait a minute, then replace the battery and cover. Power on and wait patiently through the long reboot - about 5 minutes. See if things return to functioning. Like all computing devices, BB suffers from memory leaks and others... with a hard reboot is the best remedy.

    Best!

  • Z10 Z10 crahses Blackberry BlackBerry; does not turn off button, and struggles to access the hub

    I just got a new blackberry Z10. which I believe has been refurbishing My Vodafone provider.

    The blackberry is so bad that they actually sent me a knew phone and does not want this return of blackberry but I am frustrated by the latter.

    When receiveing the blackberry, I got the unlock code to unlock it, it worked perfectly.  Once unlocked, I entered my Vodafone SIM that didn't do not need to still use it with another sim card.

    First, I updated the blackberry for the last version of the software and complete the set up process.

    Then I restored my old data from my previous Blackberry Z10, which also does not (various issues)

    The phone blocks (blocks) and did different things; the screen freezes and does not even turn it off the button, I have to take the battery out to restart it, or I have to screen does not freeze, but you cannot access texts/emails or contacts and he says 'prepare the hub' but never really in it.

    Sometimes it will allow me to use the off button, but especially, I have to take the battery out and put back starting.

    It is possible to make a call sometimes, but he cuts during the call.

    I have reset the blackberry back to the factory settings and even tried to use with on a restoration, just in case my data has been corrupted somehow.

    I tried to use it with a different network sim card and also tried it with a sim card, just so use it on wifi, the same problems.

    I was sent a new battery so tried both batteries.

    I have reset to factory several times.

    Any help would be appreciated.

    Linda

    It happens to any type of equipment.

  • BlackBerry screen Smartphones Torch 9850 does not turn

    Hello

    I got a new Blackberry Torch 9850 and noticed that the screen does not turn when the phone is held to the side. Compass calibrate as well.

    I have updated to the most recent software available - 7.1 Bundle 1737 (v7.1.0.580, platform 5.1.0.429).

    Did not help at all. However, I accidentally found that the screen turn to a landscape position if the phone is quite strongly shaken. So that means accelerometer should work somehow, simply not properly.

    Any ideas how to solve this problem?

    Thank you in advance.

    Hello and welcome to the community!

    Please try to start safe mode:

    • KB17877 How to start a smartphone BlackBerry in Mode safe

    You will take several attempts to get the combination of keys ESC (press/release/hold) OK, so be patient and you may need to try a few variations of what shows the KB. When properly in Safe Mode, see if the behaviour persists (I suspect it will, but it's worth the test). If so, then go back to your place of purchase or warranty provider that something is wrong at the hardware level, for which no amount of software, OS, or Internet-remote diagnosis can help.

    If the behavior does not persist in Mode without failure, then well... think what happened just before this behavior started? A new application? An update? A theme? Something else? Think carefully that the slightest change can be causal... and try to undo all that was.

    Good luck and let us know!

  • BlackBerry Smartphones Email page will not turn

    I love the feature where the screen goes from portrait to landscape I did rotate my BB. Unfortunately, he seems to have leaned chaning when I look an email or SMS (it worked until yesterday). It does not turn while I am on my home page... I think that I went through every page of menu and option I can find but no luck to find a way to fix it.  Someone at - it ideas?

    With the BlackBerry device powered time, remove battery for a few seconds and then reinsert the battery to restart.

    Try again.

  • When I turn my iphone sideway, the video does not turn sideway

    When I watch the video on my iphone, I usually turn my iphone sideway, the video would turn sideways to get the most out of the video. But now it does not turn sideways.  Try to find the adjustment to set the option or the recent updated version this video sideway option removed.

    Swipe up from the bottom of the screen to get to the control center. Press on the icon of a padlock on the right side until it becomes black. If the icon is white, the screen rotation is locked.

  • Toshiba Camileo P10 does not turn

    I have a toshiba camileo p10. The problem is that the camera does not turn. I tried to recharge the battery, but the red light blinks for hours.

    I tried without the battery and the charger plugged but nothing happened. I cleaned the contacts.
    All solutions?

    Have you removed the battery AND the AC adapter?
    Try this. The two parties should be removed/disconnected.
    Leave the camcorder for some time (a few hours). Press and hold button power 30 sec long. After this plug in the battery and charger.
    Wait until the battery has been charged and then try to turn on the cam by pressing the power button.

    Good luck buddy.

  • Toshiba 46HL900A does not turn on

    My TV turns completely. The Red led will turn from red to green, but the TV does not turn on? Someone knows why? Thank you

    Hardware problem might be serious... to be honest, that you have some many options troubleshooting...
    If its material of serious malfunctions, only an authorized technician would be able to help you.

  • camera does not turn on

    I tried to load camera after death, it does not at all, but the orange light is on when it is plugged, let it charge all night and still it won't turn. I videos I would like back, please help.

    The charge indicator lights orange when the charging starts. It seems that the battery is charged. Try to turn on the camera while loading and check if it is turn on.

    Note: The charging light turns off, charging is completed.

    If the camera does not turn ON even when the load is in progress, the service is required.

    You can initiate the service from the link below:

    https://eService.Sony.com/

    You can also contact our telephone support or Chat to try additional troubleshooting procedures.

    http://eSupport.Sony.com/us/p/select-System.pl?Director=contact

    Please provide model # exact camera while contacting support, so that they provide accurate information. You can locate model # on the back panel and it will start with the letters MHS.

    If my post answered your question, please mark it as "acceptable Solution".

  • Satellite PRO U300 does not turn off

    Hello

    I am facing a problem for the last few days on my Satellite PRO U - 300 (31st PSU)...

    The machine does not turn off and the power light stays on (blue LED) even after you have disabled. In fact, happened 3 - 4 times when I start the computer normally by pressing the power button / stop, it does not start and I noticed that the indicator was not extinguished even after + shut down +. Like any it is blocked! I have to finally, remove and reinsert the battery to start the laptop.

    Some details of my pc are as under:

    Version of the OS Microsoft® Windows Vista Business 6.0.6001 Service Pack 1
    BIOS Version V2.00
    Processor Intel (r) Core (TM) 2 Duo CPU T7100 @ 1.80 GHz

    Can someone help me solve this problem. Is it possible that during the uninstallation of programs, any perticular driver file is also deleted?
    Thank you

    JITENDRA

    Hello

    I don't know that you understand the indicator of power, but to me it sounds like AC Power LED and this LED is always on when the laptop is connected to the power supply.

    Power on / off LED is probably what you mean (the other starting on the left).
    Anyway, you turn off your laptop using a standard on the Start button?
    Are you sure you want to use the Hibernate mode.

    Believe me, the entire description here is pretty confusing to me. It may be that the laptop is turned OFF but power light is still on.

    Have you installed something 4 days ago? Or deleted some important application?
    Sorry, but it is not easy to say with certainty what the problem is here.

  • Pavilion 15-e020tx: does not turn off pc portable hp pavilion 15-e020tx

    Hello.
    I have a pc hp laptop pavilion 15-e020tx. It does not turn off and does not wake up mode 'sleep'...

    I tried to restore my laptop to factory setting, updated everything I can, but it still does not work
    Could someone help me please

    Update the BIOS to the current version. A F.24. The direct link to the download is below.

    http://ftp.HP.com/pub/SoftPaq/sp69501-70000/sp69897.exe

  • Does not turn my Iphone 6? /

    I own an iPhone 6 and I have for a year now. I turned off my phone a few hours ago and went to turn it back to the and it does not work. The apple logo appears, but the screen turns off after 5 to 10 seconds of the projected apple logo. I tried pressing the two keys and I also tried to connect my phone to itunes but it doesn't connect either.

    Press the sleep/wake and home buttons and keep them for at least 10 seconds.

    If this is not enough, take a look at these articles Support from Apple:

    If your iPhone, iPad or iPod touch does not respond or does not turn on - Apple Support

    Use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

    As a final step, try recovery mode. Turn off your unit, then plug it to your computer with the hold home button. Hold down Home button until you see the logo on the screen of your iPhone iTunes. After that on your computer, you should see the iTunes window saying that your iPhone needs to be restored to factory settings. Click Restore.

    More info here:https://support.apple.com/en-us/HT201263

    If these steps do not work, contact Apple and ask for help.

    https://www.Apple.com/support/iPhone/contact/

  • printer does not turn on

    My Deskjet 6980 printer has stopped working.  It has worked very well so far. Flashing lights said he needs ink. I put in the new ink. Now, it won't turn. The power supply is turned on, the works of output (without surge protector), but the printer does not turn on. In all he has no light on the printer, except light power cord in the back. I tried everything I could find online, but nothing works. My computer was still recording the printer, but since it will not power, says that it is in offline mode. Any suggestions would be helpful.

    The unit may have developed a power failure, but may be also simply in a State of error because of the fresh cartridges.  There are a few steps, I'll try in this case of troubleshooting.

    * If possible, try to remove the cartridges that you recently installed before performing a hard reset of the printer.

    * Hard reset of the printer by unplugging the device, disconnect the other end of the power cord from the wall outlet, separates the power cord of the power supply, wait 30 seconds and plug it back up.

    See also the steps described in the document, found here, to solve a lack of power.  I hope this helps.

  • L50D-B-146 satellite does not turn

    Hello

    I have a problem with my L50D-B-146 turns is not on. Very rarely, when I try to turn it on it works. Once I managed to turn on I tried to upgrade the Bios to 1.6 1.2, but you must restart your computer to complete the installation I couldn't because it does not turn on 99% of the time. The laptop didn't work before I tried upgrading the Bios is not the fault of the installation to fail. Also when I get to turn Windows works perfectly fine, until I have to turn it off again.

    When I try to turn it on the power button light works and you can hear the fan, otherwise you may not even see the screen Toshiba Leading Innovation, so I don't think it's the fault of the window. I repeat again once you can activate from time to time, but very rarely. Also it is not the fault of the monitor that I connected the laptop to an external display, and again, there was a problem.

    I would be very grateful for any solution to this problem

    The solution to this problem?
    I don't know if anyone here can offer virtual diagnosis and offer the working solution.
    When the machine works sometimes such a problem is not easy to understand. Such behavior of the laptop must be analyzed and may be tested with diagnostic tools.

    What we do here, it's just to speculate at what may be the problem. Looks like the BIOS related issue. For some reason, from time to time your machine cannot pass the BIOS checking the material.

    Have you already contacted Toshiba services and asked for help?

Maybe you are looking for

  • defects of keyboard MacBook

    Is anyone else having problems with the new Macbook keyboard? Mine is around the age of 6 months and this is the 3rd time I got it to apple with questions "dead key action. The 'spring' in the keys fail after awhile on the common keys. Command button

  • HP Photosmart D110: printer problem

    I feel multiple copies and printing started to look like it when ink is low.  I put in a new cartridge and made the steps to align.  There is no error message but when I check the status of the printer it tells me the ink levels are full and it is re

  • Imaqio (fpga) not function

    I am trying to run this program... attached example is the program error has appeared...

  • Integrated webcam does not work after update from MS Essential

    I have a Dell XPS 15, and the built-in webcam worked perfectly, until the Microsoft Security Essentials - KB2310138 (1.131.1448.0) update that happened. Now I can't access the webcam (not found in the Dell Webcam Central) and can't even see the built

  • Computer "is" more low-signal router instead of range extender

    I've seen a few similar posts; but nothing seems exactly like my problem; or I missed it. I have a router WRT54G and WRE54G range extender; seem to be working well and talk to each other.  (Took a while, but I got it; and it has been fine since.)   I