BlackBerry BB Z30 Z30 connects to non-existent WiFi signal and does not accept the real

Similar Questions

• Error: This page cannot be displayed - the remote device and does not accept the connection. (! found)

  * Original title: this page cannot be display the remote or unit does not accept the connection. (! found)

  My internet connection works very well, I'm trying to access a page of my gate of the school we use to complete missions. I can access my web page of schools, I can access my e-mail from the school, but I can't get the e-portfolio page. It says cannot display this page - the remote device and does not accept the connection - (! found). He said to ensure that the TSL and SSL in the advanced internet options security part turned on who they are, my better protected as well the mode. I've never had a problem accessing this page before. It is only this page! Help!

  Hello Teresa,.

  The probable cause of this problem could be due to wrong settings for internet explore.

  Please see the link below, Windows 8, follow the steps to check the Proxy and DNS settings
  http://support.Microsoft.com/kb/956196/en-us

  Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  Hope this helps, please answer with the results for assistance.

• the installation program could not use the existing partition because it does not contain the required free space

  before I have install android 5.0 lollipop on mylaptop but I can't use wifi to connect then I use return windows 8.1 and I decided to install windows 8 because I have experience an error I couldn't manage on windows 8.1 .when I try to install windows 8 it shows me this error Setup could not use the existing partition because it does not contain the required free space... I google search for the solution but could not find so I install the windows partition 8 on my system reserved.

  Hi Lawren,

  Thank you for your update on the issue.

  In this case, you may need to format the entire disk, clean the partitions and reinstall new windows as suggested before. However, I suggest you to contact local support for the backup of your data from hard disk partitions.

  Please post back your results for assistance.

• Connection problem diagnosis - "the remote device or resource does not accept the connection detected.

  My computer is a Windows Vista Home Premium 32-bit. The problem occurred about 2 months ago, while he was still in Vista, but please note that I've upgraded to Windows 7 last night and the problem is always the same.

  My Internet Explorer, updates to the computer, iTunes and everything, EXCEPT my AOL, does not work. My connection says 'excellent '. (Hang everything on my laptop to my wireless are works fine, that my office is having this problem)
  When I click on Internet Explorer, it says "Internet Explorer cannot display the webpage", and when I click on "analyze the connection problem" said "problems discovered - the remote device or resource does not accept the connection detected.
  I talked to my internet provider Comcast all morning this problem: she said that his side internet connections work properly. She walked through me steps including reconnected the router cords, control the way in which the Internet is put in place and other things, but everything was how it was supposed to be. She suggested that maybe AOL could be the problem and to remove it because I used it, so I did, but nothing has changed. So then she told me to contact Windows... (not sure how to call technical Windows supports without having to pay $59?, but found this forum)
  Is anyone familiar with this problem and could you please help or at least point me in the right direction?
  In addition, please let me know if you need any other information on the problem.
  Thank you
  Lily

  Hello

  Try the steps from the following link

  http://support.Microsoft.com/default.aspx/KB/956196

• is not abstract and does not substitute the abstract method callLogRemoved (net.rim.blackberry.api.phone.phonelogs.CallLog)

  Can someone tell me why im getting the following error

  is not abstract and does not substitute the abstract method callLogRemoved (net.rim.blackberry.api.phone.phonelogs.CallLog)

  callLogRemoved is set, I tried to remove it and it also gives me the same error

  Here is my code

  Thanks in advance for answer

  Net.rim.blackberry.api.phone import. *;
  Net.rim.blackberry.api.phone.phonelogs import. *;
  //*******************************************************************************//
  public class mylistener extends Thread implements {PhoneLogListener}

  {} public void callLogRemoved (int arg0)
  System.out.println("/***/"); "
  System.out.println ("CallLog removed');
  System.out.println("/***/"); "
  }
  {} public void callLogAdded (int arg0)
  System.out.println("/***/"); "
  System.out.println ("CallLog added");
  System.out.println("/***/"); "
  }
  ' public void callLogUpdated (int arg0, int arg1) {}
  System.out.println("/***/"); "
  System.out.println ("CallLog update");
  System.out.println("/***/"); "
  }
  {} public void reset()
  System.out.println("/***/"); "
  System.out.println ("CallLog Reset");
  System.out.println("/***/"); "
  }

  }

  Javadoc documentation:

  public void callLogRemoved (CallLog cl)

  but you have coded:

  public void callLogRemoved (int arg0)

  An int is not a CallLog, so these signatures do not match.

• I can't update to of things - like iTunes, flashplayer or any error games resource or the remote device does not accept the connection

  Hi as I said in the title, whenever I have troubleshoot my connection says the remote device or resource does not accept the connection. I have a race a portable CAREB on windows 7. I can internet eyebrows and watch videos online and things like that, but I can't update things like iTunes, flashplayer or any what games that I run on my laptop. everytime I try I get a message of program control connection what ever I am updating. I checked the other computers in my house and they are all very well, as well as in home game consoles have no problem connecting to the internet and update. someone help me please

  Original title: Troubleshooting my my wireless conecction and it say the remote device or resource does not accept the connection

  Hello

  Thanks for posting in the Microsoft Community. This problem can occur because of incorrect settings of Internet Explorer. Initially, make sure you have Internet Explorer as web browser by default on the computer, refer to this link: http://windows.microsoft.com/en-us/windows/change-default-programs#1TC=windows-7

  Research I found that this problem can be solved by resetting the Internet Explorer settings. Try the following steps:

  1. Press the logo Windows + R to open the Run dialog box.

  2. Type inetcpl.cpl in the Run dialog box, press enter.

  3. Now click on the Advanced tab , and then click reset.

  4. Click apply , then ok.

   

  Note: Resetting Internet Explorer settings is not reversible. After a reset, all previous settings are lost and cannot be recovered.

  Please refer to this same thread http://answers.microsoft.com/en-us/windows/forum/windows_7-networking/connection-problem-troubleshooting-the-remote/24bfdbf3-4914-45a8-ae45-38243b59be1c?page=1, he is older but he helped a lot of users.

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• The remote device or resource does not accept the connection

  I have a desktop computer Windows 7 connected to my router via an ethernet cable, but when I try to go to a website on Google Chrome as Google.ca, loading the page forever without even showing the page. Finally after a long wait, it finally says that the Web page is not available. I tried to go to the Web sites by using Internet Explorer, but occurs the same result. I tried to troubleshoot the problem and it "the remote device or resource does not accept the connection" is detected, but does not set automatically. I have a wireless printer connected to my router which is online and works very well. I can even connect to my router page. But still no access to Web pages don't like my outlook.com and etc. Sometimes a go open the network and sharing Center to change the settings of the card and disable the wired ethernet only to activate it again. It works only a few times, and it's really frustrating, because it is the only computer that does not connect to the internet, even with a ethernet cable. Please find a solution as soon as possible. Thank you.

  Hello Kyle,.

  Your computer is connected to a domain network?

  If your computer is connected to a domain network, then, I suggest you follow the link below to post your query in the TechNet forums, because they have more expertise on this issue.

  Forums TechNet for Windows 7
  http://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w7itpronetworking

  Otherwise, try to follow the following suggestions to solve the problem.

  "Internet Explorer cannot display the webpage" error

  Note: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings. Reset Internet Explorer is not reversible, and all the previous settings are lost after reset.

  Also refer to:

  The remote device or resource does not accept the connection

  I hope this helps. Otherwise, feel free to write us again and we will be happy to help you.

  Thank you

• the remote device or resource does not accept the connection - CIMC

  Hello

  I tried access MMIC remotely via web browser, but get the error message "the connection was refused by the target device.

  I was able to access a device similar to the same place but will not be for this particular device.

  Another diagnosis with internet explore came with reason "the remote device or resource does not accept the connection.

  Any idea please?

  Thank you

  Hi Mike,.

  Is the host this time online? Are you able to ping the server MMIC? If you are able to ping the server of CIMC, but unable to connect via SSH or the graphical user interface you can hit the following bug;

  https://BST.cloudapps.Cisco.com/bugsearch/bug/CSCun88303/?reffering_site...

  I hope this helps. Please check all the useful answers as correct while others can find answers faster.

  Qiese Sa'di

• I've set up the virtual machine in win 7 Ultimate and put some data. Now when I try to connect it asks password and does not accept any password.

  Default password Machine virtual XP Mode

  I've set up the virtual machine in win 7 Ultimate and put some data. Now when I try to connect it asks password and does not accept any password. Please giveme the default password

  If you're talking about XP Mode the default password is XPMUser.  In general you can not use Windows without a password in Windows Virtual PC that you can with Virtual PC 2007 and before.  XPMUser is used only with the XP Mode virtual machine.  All other virtual machines requires a user created password.  If you have changed the password in XP Mode and forgotten, then you have to start over.

  Windows Virtual PC is based on virtual server rather than VPC and all virtual machines need a password.  If necessary, uninstall the integration features, start the virtual machine and create a password for the admin user.  Restart the virtual machine, and then reinstall the integration features.  You will not be able to access a virtual machine created by the user that has no password, while the integration features are installed.  Once you have everything right, that a virtual machine will not be asked a password if you are the admin user in Windows 7.

  @george1009,.

  Everything got?  :)

• Remote device does not accept the connection since W7 re - install.

  Since then reinstall it W7 Pro, I'm now no longer able to map a network drive on a NAS on the network. The NAS device is visible to all other domestic uses (Sonos, Internet TV, etc) and can be accessed via the front view in a web browser without any problem. I can PING the device and don't get a response, so no problems with the device itself (which was untouched before, during or after re-setup of W7).

  Just cannot map a network drive!

  Tried to disable the firewall etc, but still no luck. Also checked that all relevant services are running.

  Someone has ideas that more I can do to get my laptop to talk to it as a network drive?

  When I enter the ip address of the NAS and click 'Finish' to the card, I get the following dialogue:

  The remote device or resource does not accept the connection
  The device or resource to 192.168.x.xxx is not configured to accept connections on port 'file sharing and printers (SMB).

  any help would be greatly appreciated.
  Thanks in advance.

  Hi Stuart,

  The question you posted would be better suited to the TechNet community. See the link.

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

  Hope this information helps.

• BlackBerry Smartphones Blackberry Curve does not accept the password

  My bb curve again is a upward. Yesterday after checking a page Web in the browser, the appliance has stopped working. It does not accept the password and it says card complete multimedia. Haven't tried anything because I don't know what to do. The phone is relatively new, 5 months old and I ringtones but I download music, then how can the support card be filled? I don't know yet if it is linked with the media card since I can't access the phone because the password is not accepted. Any help will be appreciated. Thank you

  Remove the battery and the cardinal of media leave the media card for now.

  Reinsert the battery and start.

  Leave the BlackBerry sit for five minutes after the restart and see what happens.

• IE9 "the remote device or resource does not accept the connection.

  IE9, "the remote device or resource does not accept the connection" appears when you try to open any website. My office to tell me that it is connected but cannot access any www. Meanwhile, my laptop connects fine. I have reset the settings in the internet options does not. I downloaded 'team' to connect (or similar) and asked for a connection and I thought that suspicious so uninstall this program... leaving me without access to the internet... * sigh * please can someone help me?

  Hello

  
  Method 1:
   
  Step 1:
   
  Run the network troubleshooter and see if that diagnoses the problem.
  Using the troubleshooter from network in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7
   
  Step 2:
   
  Reference:
   
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows
   
  See also:
  How can I troubleshoot network card?
  http://Windows.Microsoft.com/en-us/Windows7/fix-network-adapter-problems
   
  Method 2:
   
  Temporarily disable antivirus programs and firewalls.

  Disable the anti-virus software

  
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Windows Firewall
  http://Windows.Microsoft.com/en-us/Windows7/products/features/Windows-Firewall

  http://Windows.Microsoft.com/en-us/Windows7/firewall-frequently-asked-questions

  Note: make sure that you enable the antivirus software, other security and firewall after the test programs.

  Warning:
  Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

   
  Display the results.

• After installed LR6, I firstly the Programm. Its audit of my ID. But then the program does not accept the button: Seriennummer prufen with a new window: no internet connection. But the connection is OK.

  After installed LR6, I firstly the Programm. Its audit of my ID. But then the program does not accept the button: Seriennummer prufen with a new window: no internet connection. But the connection is OK. So I can't start the program.

  Hello Siegmud,

  Wende Dich wie oben und some showers a cat den, denn

  Problembehebung für die Aktivierung und Deaktivierung > Stellen Sie sicher, dass eine zum includes Internet connection > werden (auch) displaying Fehler, wenn Ihr Computer nicht mit dem Internet ist clear (breast kann, dass) oder wenn er nicht vom Aktivierungsserver erkannt wird. Wenn are sich um einen Fehler im accordingly mit dem Aktivierungsserver all, set Sie sich mit each in connection. Halten Sie your Seriennummer bzw. Adobe-ID bereit.

  Hans-Günter

• When I try to connect to the wireless router, it asks you the password I put it and he then asked again and will not accept the password. all other computers (without windows 7) connect correctly.

  My new computer has windows 7 when I try to connect it to my router it ask the password, then he asks the network password I put in the same password and it does not accept it. I spent ove an hour on the phone with a very helpful and confused expert to the Virgin. He tells me that the password only I need to communicate with the router is the main. We tried a lot of things all very technical and finally he gave up. Other computers with vista on connect very well with no problems at all.

  The network is fine and all the settings are fine. Occasionally, it connects via a home network but then it stops. When I try to communicate with the printer wireless signal stops and starts.

  I don't hold much hope of a response that experts were left very confused by this first abandoned after 45 minutes and the second lastered over an hour are totally flumaxed and blame windows 7

  But everyone told me that windows 7 was supposed to be the best

  Your post has nothing to do with the Windows Update feature (compared to the upgrade of Windows). Please repost it here for assistance: http://social.answers.microsoft.com/Forums/en-US/w7network/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Can not connect. He does not recognize her fingerprints and does not recognize the password

  Original title: cannot open a session

  my friend cannot connect to his pc. For some reason it does not recognize fingerprints and then when he tries to connect manually using his password, it says it does not recognize the password, even though he knows that it is correct. Does anyone know why this is and how to solve?

  Hi Knightofkent,

  You can read the article and check if it helps.

  What to do if you forget your Windows password

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-you-forget-your-Windows-password

  In addition, technical support engineers Microsoft cannot help you recover passwords files and Microsoft who are lost or forgotten product features.

  Microsoft's strategy concerning lost or forgotten passwords

  http://support.Microsoft.com/kb/189126

  I hope this helps.