BlackBerry Bold 9900 not saved the network of Blackberry smartphones

Similar Questions

• "the settings saved on this network do not match the network requirement" is the message that I get when I try to connect to my wifi

  I changed my router to another wireless.  Since then, my laptop cannot connect to my wifi.  When I search my wireless network, it is exed out in red.  and the message "the settings saved on this network do not match the network requirement"... Please help

  [moved from comments]

  Hey Mike,

  -What version of Windows is installed on the computer?

  This problem usually occurs with wireless networks. I suggest you try the suggestions in http://answers.microsoft.com/en-us/windows/forum/windows_vista-networking/the-settings-saved-on-this-computer-does-not-match/a82432f2-9312-480a-b2ea-720033c73387

  Let us know if this can help, or if you have any questions.

• BlackBerry "BOLD" does not honor the column widths

  The BlackBerry "BOLD" is not honoring the widths of column on our Web site.

  Is this a known issue?  Other Blackberrys work very well.

  An example of this is that we have a two-column table, a column has a width of 32% and the second column 68%.  Table poster 50 / 50.

  Interesting. Remove the ' table-layout: fixed "internal table seems to fix the problem. It looks like a bug in the browser.

• Smartphones from blackBerry Bold 9900 stuck on the update with App error 602

  I tried to update my device software (Bold 9900).

  The 9900 is connected to my computer and through backup and installation, then stopped at the restart for a few hours. In 9900 message "App Error 602"

  What should I do next.

  Thank you

  Tom

  Something is wrong here if your all steps

  How to perform a clean reload of the BlackBerry Device Software using BlackBerry Desktop Software fo...

• Portege R100: WLAN does not recognize the network

  I have a 2 year old Toshiba R100 Notebook.
  It has a wireless adapter:

  Intel (r) PRO/Wireless LAN 2100 3B Mini PCI Adapter

  We have tried several times and had technicians trying to connect to our WAP network office. He simply do not recognize the network and we offer all mailboxes menu to connect. It works fine on WEP networks and open.
  Our network is one: -.

  Cisco Linksys Access Point Wireless-G with SRX, model WAP54GX

  It has been suggested that I have buy a wireless card for WAP networks put in the slot of the card.

  Would you agree?

  If so, then that one would you recommend?

  Hello

  It seems that the card supports only WEP encryption and cannot handle WAP encryption that secures the WLan network.
  Fact is that encryption depends on hardware and not software. This means that if the card doesn t supports the Protocol WAP for the update of the driver will not change this situation, but only a replacement card.
  So I agree with you that the replacement card may solve your problem.

  Unfortunately, I can't give you any recommendations because I m not 100% sure what card uses the WAP protocol, but you can order the Wlan card compatible and supported by the Toshiba service partner in your country. AFAIK the guy order the Toshiba parts directly.

• HP Solution Center does not recognize the network printer

  Network has a hp 309 a printer, can print from the computer, the problem is:

  HP Solution Center not load-says incomplete installation.  If I plug in the USB cable and let it continue, it sets up a second printer that only works on the USB cable and it still does not recognize the network printer.

  Question how can I get the Hp solution program to reward the network printer.  If I reload the CD, then reinstall the will other people on the network of the problems?

  Resettlement on your machine won't affect only you, no other machines on the network.

• My Windows 7 computer will not find the networks wireless after a system restore.

  My Windows 7 computer is not find wireless networks after I did a system restore. It was perfectly good wifi before the system restore and other members of my family have a great connection except me is not a problem with my router. I think I know what the problem is, but I just don't know how to fix it. So there you go. I did my restore system about 2 days after that we moved on the provider of internet/tv "Comcast" to the tv/internet provider "Verizon". what I think has happened, is that I restored my computer to the point when we had no Verizon so that he could not find the network. Now, since we have Comcast it won't identify this network either, so maybe some of you out there could help me. : D

  Hello Nicolas,.

  Thank you our writing about Microsoft Community.

  If your computer has a wireless network card, Windows will automatically detect the networks wireless in range of your computer.

  You may encounter network or problems of Internet in Windows for several reasons.  Some common problems that can cause these problems are:

  • A wireless network adapter switch that is not enabled

  • WEP, WPA, or WPA2 key or password security issues

  • Cables that are not connected correctly

  • Corrupt or incompatible drivers

  • Missing updates

  • Network connection settings

  • Hardware or software problems

  I would ask you to check out the troubleshooting steps provided in the articles below and check if they help you solve the issue.

  Why can't I find a wireless network?

  Wireless and wired network problems

  Here are some links to site Web de Support of Comcast, who talk about troubleshooting of XFINITY Internet connectivity issues.

  XFINITY TV App: Can't detect your XFINITY home network

  The problems of XFINITY Internet connectivity

  Hope the helps of information provided. Do we know the State of the question, so that we can help you further.

  Thank you.

• My Smartphone/iPad can connect to the wifi network, but my laptop do not show the network.

  My smartphone and iPad have both work successfully on the wireless network, but my laptop (Dell Inspiron series n and Sony Vaio e series) does not display the network. The router * I use the modem is D-Link DSL-2750U. Computers that run windows 7 Home Basic. What should I do?

  Hello

  As you mentioned that you are able to connect the Smartphone / I Pad to the wireless router, but the laptop that is running Windows 7 does not connect to the router.

  First of all, try to run the network troubleshooter to see if it can help diagnose and solve your problem:

  See the provided article below for more information:

  Why can't connect me to a network?

  I also recommend that you go through the steps given by 'Kevin Hau ' April 24, 2010 in the link provided below.

  Problem connecting Wireless Windows 7 - No. available wireless connections

  See also:

  Wireless and wired network problems

  Hope the helps of information provided. We know the results.

• Storage migration fails with the error: could not complete the network copy to path to the file

  Hello

  I have two hosts ESXi 5.5 with local storage and VMware vCenter device which manage them. Everything worked well until that time.

  Now when I try to make the host migration and storage, processing or power off the virtual machine, I get the error message:

  Could not complete the network for file /vmfs/volumes/.../path/to/file.vmdk copy

  The situation is the same when I try to deploy VM on ESXi-2 model that is on ESXi-1.

  All with the network configuration is correct. I have ping between the hosts on ESXi and ESXi and vCenter. No firewall hosts ESXi and vcenter. No physical firewall between hosts.

  The network latency is less than 1 ms. No packet loss.

  I read this VMware KB article: Storage migration fails with the error: could not complete network file copy and I tried solutions explained here, but the results are the same.

  You have ideas where the problem may be?

  Hello guys,.

  I finally found the problem.

  ESXi servers are configured with MTU 9000, but the switch where the hosts are connected was a bug documented with frames. I found the problem after finding this article http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1003734

  I run the command of ESXi-1:

  vmkping - d-s 8972 192.168.10.12 where 192.168.10.12 is the ip address of ESXi-2

  The result was:

  3 packets transmitted, 0 packets received, 100% packet loss

  as a workaround, I reduce the MTU to 1500, then I patched the problematic switch.

• Smartphones from blackBerry Bold 9900 set up the e-mail icon does not not :(

  I had to go back to Blackberry Bold 9900 for awhile my Q10 screen is cracked and I sent it to be repaired. I put the new sim card in and try to set up the e-mail account he showed me the mail of size and I knew that something is wrong. I called my network provider and they have implemented my Blackberry data plan and I signed up with blackberry network. I turned my phone market and bb next to the network icon icon appeared which is good. But when I go to set up an email account and click the "email accounts" nothings happens. called my network, they do not know how to help me...

  Hello and welcome to the community!

  With a strong carrier network (for example, not only WiFi), I suggest the following steps, in order, even if they seem redundant to what you have already tried (steps 1 and 2, each should result in a message from your BB... Please wait just before moving on to the next step):

  1) register HRT

  • KB00510 How to register a BlackBerry smartphone with wireless network
  • Please wait a 'registration' message reach your Messages application

  2) Remove and return Service books (pre-BB10 only devices)

  • KB05000 Remove the maintenance book for the BlackBerry Internet Service email account in the BlackBerry smartphone
  • If you do not have access CMIME, continue deleting
  • KB02830 Send the directories for the BlackBerry Internet Service
  • Please wait "the Activation' Messages, one per already configured e-mail account, arrive in your Messages. If you have not already configured email accounts, please wait 1 hour.

  3) restart

  • Pre-BB10 ONLY devices. With power ON, remove the hood back and remove the battery. Wait a minute, then replace the battery and cover. Power on and wait patiently through the long reboot - about 5 minutes.
  • Peripheral BB10. Hold the top button until the counter reaches zero. Wait for the unit to be completely stopped (for example, nothing appears on the screen, no lights, etc.). Hold the top button until the red light. Wait through the entire boot process. IF this fails, you can try the method of battery-pull above, but it is normally NOT recommended unless nothing else works.
  • See if things return to functioning. Like all computing devices, BB suffers from memory leaks and others... with a hard reboot is the best remedy.

  I hope that will move things again for you! If this isn't the case, then you can try this link from your BB browser:

  • www.BlackBerry.com/Integrate.

  Otherwise, you should contact your mobile provider for official support... but this time do not let you fob off the coast. You pay for your services, making them responsible for your formal support service, including if necessary climbing to BlackBerry-related.

  Good luck!

• BlackBerry Smartphones Blackberry Bold 9900 - what are the links for on the battery cover?

  Inside the Blackberry Bold 9900, 2 Gold contacts there.  There are corresponding contacts on the back cover that looks like it may lead to an antenna any.  I pulled the back cover, while the aircraft was on the signal does not fluctuate a bit.  Anyone know what it is for?

  Update: I said that maybe that's close Communications on the ground.  Can we get a moderator to BB to confirm this?

  Hey Scarytrek,

  You are right, that the antenna on the back of the BalckBerry Bold 9900 is for Near Field Communication. Take a look at this link for more information on NFC http://bbry.lv/r6IU9X

• BlackBerry Smartphones Blackberry records is not on the network

  Hi, I recently bought a unlocked Blackberry Storm 9530 on Amazon for use on my network provider of Unitel of Angola. I bought a BB plan with my carrier but the phone will not register on the network for BIS. Ive done a wipe of security on the device, rebooted the machine, but nothing happens. Can someone help me with this please?

  Ahhhh... that's very significant. This means that for some reason, the PIN code of this BB is locked to receive services of BIS of ANY carrier. It might have been reported as lost or stolen, which would result in this message. But no one here can do a search on the issue... on the contrary, your carrier will have to be prepared to dig deeper for you, including climbing formally to BlackBerry if necessary.

  Good luck!

• "BOLD" does not meet the system requirements? -BES

  This is getting ridiculous.

  Tried to install my Orange BES "BOLD" - and I get this message on the WAP site:

  View

  I'm sorry that your device does not meet the system requirements that are needed to support BlackBerry App World.

  Yes - I'm in the United Kingdom

  No - there is no policy of BES blocking apps

  Feature: "BOLD"

  OS: v4.6.0.162

  Carrier: Orange UK

  Plan: BES

  2 devices on different networks - and AppWorld does not work on either! is this an April fools joke?

  This question seems to have been resolved - try to access the same address now and it will work.

• Cellular data opens, but may not use the network have to reset net work every time

  Hello everyone

  My problem is:

  When you use the cell data, after several hours, the net is not available

  I have to reset the network every time

  and this happens every day

  I'm so sad!

  Hello

  If you have not already done so, it can help to upgrade your iPhone to the latest version of the software:

  • Update the software on your iPhone, iPad or iPod touch - Apple Support iOS

  Also, follow the steps detailed here:

  • If you cannot connect to a cellular network or cellular data - Apple Support

• Firefox is not saving the history, what to do to save the history?

  Firefox is not saving history when remember same story is selected and im not not using any cleaning tools.
  Only visible history is in the closed tabs recently. So what to do?

  By selecting "Use the custom settings for history" is not make changes to the parameters of the story, she can simply check the settings of the story and change individual items.

  Are there any visible history in the library (history > view history)?

  You can check for problems with the database places.sqlite file in the Firefox profile folder.

  • http://KB.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
  • https://support.Mozilla.org/KB/bookmarks+not+saved#w_fix-the-bookmarks-file