BlackBerry Classic communicating directly with blackberry

Similar Questions

• It is possible to sintonice fm radio on ipod classic 160 gb with an accessory?

  It is possible to sintonice fm radio on ipod classic 160 gb with an accessory?

  Yes. With something like this:

  EF http://www.Amazon.com/Griffin-Navigate-in-line-Controller-iPhone/DP/B001IWOBLI/r = pd_sim_sbs_107_1? ie = UTF8 & dpID = 212vDHs...

• Get "communication error with kernel" message when you try to run a virus scan program

  Get "communication error with kernel" message when you try to run a virus scan program

  Hello

  What antivirus do you use?

  Follow the steps in the article mentioned below and check if this solves the problem.

  
  The error message "error communicating with kernel":
  http://KB.eset.com/esetkb/index?page=content&ID=SOLN2280

• Communication problem with the printer

  I'm trying to print on a printer Lexmark 1200 series of a Toshiba laptop. Laptop computer identifies the printer is the printer is displayed in the control panel. Whenever I try to print even if I get a message that says: "communication problem with the printer. Any help is appreciated.

  Hi Nick,

  1. What is the exact model of the printer number?

  2 is this problem limited to any specific application such as Internet Explorer, Microsoft Word etc.?

  It seems that some of the 1200 Series printers is not compatible with Windows 7. You can enter the number of exact model and research for more information.

  http://www.microsoft.com/en-us/windows/compatibility/win7/CompatCenter/ProductViewerWithDefaultFilters?TempOsid=win7&Locale=en-us&TextSearch=lexmark%2B1200%2B&Type=Both&CurrentPage=0&TotalPages=1&ShowCriteria=0&SortCriteria=Relevance&Compatibility=Unknown&LastRequested=14

  If the printer is compatible and you are always faced with the question, you can proceed with the steps.

  Method 1:

  Run the troubleshooter and update printer drivers.

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Method 2:

  If the problem persists. I suggest you perform the steps described in the article.

  "Communication not available" or "Document Failed to Print" Error Message and the print job hangs in the print queue

  http://support.Lexmark.com/index?page=content&ID=SO4473&locale=en&UserLocale=en_US

  Note: Antivirus software can help protect your computer against viruses and other security threats. Have a computer without any security software can cause a potential danger to your computer. Therefore, make sure to activate the firewall and security software once you are finished with the test.

  Hope this information helps. Response with status so that we can help you.

• Communicator IP with VPN

  Hello

  I have the router DSL 877 and uc520 connecting to each other, and I installed outside PC on this customer VPN Cisco and Cisco ip communicator, I want to do IP communicator works with uc520, the problem is I already configure VPN on the router and it works, but I cannot ping the uc520,.

  I enclose the Visio diagram is how the connection and configuration.

  The router 877 pls delete the following:

  IP route 172.16.1.0 255.255.255.0 10.10.10.10

  Also your UC520 also have the NAT configuration to be changed:

  IP nat inside source list 1 interface FastEthernet0/0 overload

  --> ACL 1, should be changed to ACL 150 as follows:

  access-list 150 deny ip 10.1.1.0 0.0.0.255 172.16.1.0 0.0.0.255
  access-list 150 deny ip 192.168.10.0 0.0.0.255 172.16.1.0 0.0.0.255
  access-list 150 deny ip 10.1.10.0 0.0.0.3 172.16.1.0 0.0.0.255

  access-list 150 permit ip 10.1.1.0 0.0.0.255 any
  access-list 150 permit ip 192.168.10.0 0.0.0.255 any
  access-list 150 permit ip 10.1.10.0 0.0.0.3 all

  
  

  overload of IP nat inside source list 150 interface FastEthernet0/0

  no nat ip within the source list 1 interface FastEthernet0/0 overload

• error message "there is a communication problem with the web server."

  I'm trying to connect to three rivers FCU website www.3riversfcu.org and I get the message error "there is a communication problem with the web server." I am running Windows 7 on Toshiba laptop. No idea how to solve this problem? Something in the settings?

  Hi, Mayhem15,

  See if this troubleshooting help.  It was written for Windows XP, but in many cases, these documents still apply for more recent versions of Windows.

  How to troubleshoot possible causes of Internet connection problems in Windows XP

  http://support.Microsoft.com/kb/314095

• Premiere Pro sart to load and stop directly with a windows error message. The program is not responding properly.

  Hello world

  Premiere Pro sart to load and stop directly with a windows error message. The program is not responding properly. (or something like that... I work in German...)

  I just bought all Deinstalled CC all and installed again and again.

  The problem persists... just with premiere pro cc 2015.2... I'm working on windows 7.

  You have an idea?

  Thank you very much

  François

  You can please go through the requirements for Premiere pro - Premiere Pro system requirements for Mac OS and Windows

• Error offline - we are sorry, but there was a communication error with the server. Please try again and if the problem persists, contact Adobe Techincal Suport...  (INVALID_QUERY: XMLList object)?

  After a number of years of service, my Adobe Premiere CS4 gives me the following error message:

  Error offline - we are sorry, but there was a communication error with the server. Please try again and if the problem persists, contact Adobe Technical Support...  (INVALID_QUERY: XMLList object).

  I use this software on an old Dell desktop computer to two year with many members and drive.  It is a stand-alone application, not connected to a server.

  Anyone have any ideas on how to solve this problem?

  I think it has to do with the central resource is no longer supported.  Everything works OK if you ignore the message?

• communication error with the server. callback failed for the data entry page

  Hello
  
  We have recently applied the corrective update EMP on EMP 11.1.2.0 111.2.1.
  We have following the architecture,
  
  database server: sql server 2005
  Server Foundation (OS = windows server 2008): HSS, EPMA, Manager Calc, EAS, EIS, provider's server, planning
  Essbase Server (OS = windows server 2008): essbase
  
  After you apply the patching EMP 11.1.2.1, we apply after Electrodes for IE 9 compactibility i.e EMP 11.1.2.1.600 patches
  
  1. patch 14119724 (Workspace)
  2 14142678 patch (Shared services)
  3 patch 14224664 (EPMA)
  4 patch 14464109 (planning)
  
  After you apply above patches, all users get error when opening planning web form through the workspace of all client computer.
  
  "* error communication with the server. callback failed for the data entry page. "
  
  
  
  
  When restore us only planning patch 14464109 , issue of "communication error with the server. callback failed for the data entry page "get resolved for all users, but failed for a single user IE"user xyz" "
  
  the user xyz have OS = windows 7 and IE 8
  user xyz can take foundation server RDP can open any form of planning successfully in vain get when doing the basic machine.
  
  I have following question:
  1. Why do we get error "error communicating with the server. callback failed for the data entry page"after you apply the fixes to IE9
  
  2. after cancellation all patches or planning one patch, why the user xyz always get the error but not other users
  
  
  Thanks in advance
  
  Published by: 922755 on June 7, 2013 16:08

  It might be useful to have a read of the following doc Oracle Support - "error:"error Communication with the server. " "Callback failed for the data entry page" when you open a Web form of planning with the members of the Type of text [ID 1392689.1].

  And then this question should be resolved en.600

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• vCenter 4.1/ESXi 4.1 material status "Communication error with the server.

  I am slot that a brand new installation of vCenter with two new installs of ESXi 4.1 connected on it. I use on Dell PowerEdge 2950 s ESXi servers. I tired the customized version of Dell and vmware ESXi vanilla version. My host vCenter is Windows 2008 R2.

  In vCenter, the two server ESXi, any version of ESXi, I run, I get "Communication error with the server" error when I click the tab hardware state. No data appears in the hardware status tab.

  Only suggestion of Dell has been updated with firmware/BIOS on the server level. I did and it did not help.

  Anyone has any suggestions or ideas what would cause this?

  I had exactly the same problem what is to have everyone on this thread.  I finally called VMware support.  It is certainly a problem with Tomcat.  Apparently, during my initial installation of tomcat server vCenter (on a Win2k8R2 vanilla Server / unreleased) na not create a database file.  The vCenter Server uninstalled eventuall tech and went through the Setup again.  For some reason any Tomcat created db it's good the second time.  After installation, it takes about 5 minutes for the db should be created.

  On Windows 2k8R2 it is located here: C:\Program Files\VMware\Infrastructure\tomcat\lib\xhiveConfig\data

  The name of the comic is VcCache-by default-0. XhiveDatabase.DB

  My server didn't have one at all.  The relocation has created, at the beginning it is 0KB in size.  After 5 minutes, it grows up to 25, 600KB.

  Everything in my vCenter works now correctly.  I'm on 4.1.320137

  I hope this helps.

  Dave

• Updated 10 10.3.2 for Classic purchased directly from Blackberry to blackBerry

  I'm in the Netherlands. I bought a classic Blackberry directly from Blackberry (shop.blackberry.com). Load on the device is Blackberry OS 10.3.1.1779. "Check for Updates" on the device indicates is that I have the latest software. It is updates via Blackberry link.

  Does anyone know what I need to do to upgrade to 10.3.2? I just have to wait or is there something else I can do? Given that I bought the machine directly from Blackberry my carrier should have nothing to do with this update.

  Thanks in advance.

  Hello and welcome to the community!

  First of all, there is a difference between the version of the OS and the version of the software (i.e. the value that you quoted). Reference:

  • http://support.BlackBerry.com/kb/articleDetail?ArticleNumber=000023393

  Official methods and discussions use the value of SR, while the informal methods and tools (as well as the discussions here) are the true value of the BONE. It is therefore important to understand the difference and use/quote the value that works for the post of that work.

  Second, have you done any attempt via WiFi only with your SIM card removed? Sometimes this will overcome any block your carrier can be implemented. Be sure to shut down normally, remove the SIM card, then lights up and attach to the WiFi.

  If this fails, then you should then try the LINK method (always with your SIM card removed):

  • http://supportforums.BlackBerry.com/T5/BlackBerry-10-functions-and/how-to-reload-your-Blackberry10-O...

  Finally, if that still fails and you want to not wait and go ahead anyway, then you must use informal methods, which are more clean and you can choose a version of the OS that maybe your carrier (or anyone they control your offers) delays in approval:

  • http://supportforums.BlackBerry.com/T5/BlackBerry-10-OS-device-software/upgrading-OS10-devices-using...
  • http://forums.CrackBerry.com/BB10-leaked-beta-OS-f395/BB10-OS-archive-943672/

  Of course, before you start this, you want a good backup link, a manual copy of the memory of your device to your PC and complete documentation of your configuration (identification information of account, adding applications, configurations, etc.). Sometimes, restoring a backup returns unit corruption even, must be eliminated and reconfiguration from scratch can solve that.

  Be also aware of the risks of 10.3.2 however... There are two things to worry about. First of all, be 100% sure that you know your BBID identifiers... If you do not, you may make your useless device to anyone, including yourself. Second, once you move to 10.3.2, you cannot fall back to 10.3.1 or earlier, by any medium (for example, even the unofficial AutoLoaders can not overcome this restriction anti-secours).

  Good luck!

• Computer HP laptop, computer cannot establish communication in both directions with the device (printer)

  HP laptop, Windows 7-64 bit, no changes to the system before the problem occurred.

  Printer: HP Photosmart Plus B210a all-in-one series.

  When I click on my ink for my printer in my computer, it goes to 63% and stops. Then, he said. The computer is unable to establish communication two-way with the device. All systems are running, and there is no reason that I have a problem.

  I can print, Fax and Scan, I get blank printer paper, printer is not stuck, nothing in the queue to prevent it from printing. It will not just show my ink from my computer.

  Just try to uninstall the printer from Control Panel drivers and reinstall again.

• OS6 Communication fails with HTTP BIS - b

  Hello

  in an application OS6 I met a problem that cost me some time to find out the reason:

  HTTP GET or POST fail on connections of BIS_B using the OS6 Communication APIs - I have not found a way to make it work, so falling to OS5 network API

  Here is the story:

  a very simple scenario: send something via HTTP to a server and the server sends back a small stream. ("text/plain")

  well... you can take a look at the "Communication API demo of OS6 samples to see what should be possible using the OS6 Communication APIs

  at first I tried Simulator: all works well using blocking or NonBlockingSenderDestinations.

  the tried on a device:

  WIFI: it works the same as on the Simulator + MDSCS

  Cell TCP: works the same as on the Simulator

  BISB: FAILS - is not serious if you use GET or POST or using blocking or NonBlocking destinations

  same URL entry browser: it works well, sending text server of displayed well

  strengthened through the code being debugged, added logging statements and eventually found what happened:

  TransportHeaders respose message were different.

  It's the Transportheader using WIFI, cellular TCP, Simulator + MDSCS coming:

  Content-Type	text/plain; charset = utf-8
  Content-Length	19
  Connection	close
  Server	Jetty (6.1.x)

  was exactly what we expected: raw text of length 19 sent my Pier OSGI server.

  Now take a look at the coming of TransportHeaders rear using BISB on device (9800):

  connection	close
  Server	Jetty (6.1.x)
  content length	78
  x-rim-etag	'B93405A8E587FE3E45F4210D41D1A1218E7DE4C5 '.
  x-rim-bsm-session	None
  x-cache-search	MISS Blackberry.Internet.Browsing.Service:3128
  through the	1.1 pmds95.bisb4.blackberry:3128 (squid/2.7.STABLE7)
  content type	application/vnd. RIM.html
  x cache	MISS Blackberry.Internet.Browsing.Service

  the server threw and the connection is closed - what is the same and correct.

  the other TransportHeaders lead me to think that maybe it was how the content was transported through the BlackBerry infrastructure, but I forgot to convert what needs to be given to the customer.

  I analyzed the byte [length] 78 and found this inside this table as my 19 bytes sent from the server were found and the byte before this text was a byte of value ' 19 '' - the length of the following data. " I also found "text/plain" isnide table.

  I should put some headers more to my side Server?

  But he couldn't be that bad because by using the APIs network OS5 it is correctly by the device BISB. the code was similar.

  Here's the (simplified) OS6 code for aNonBlockingSenderDestination:

  NonBlockingSenderDestination subscribeDestination = null;
  ConnectionFactory cf = new ConnectionFactory();
  cf.setPreferredTransportTypes(new int[]{
      TransportInfo.TRANSPORT_TCP_WIFI,
      TransportInfo.TRANSPORT_MDS,
      TransportInfo.TRANSPORT_BIS_B,
      TransportInfo.TRANSPORT_TCP_CELLULAR,
      TransportInfo.TRANSPORT_WAP2
  });
  BisBOptions biso = new BisBOptions(seekretConnectionType);
  cf.setTransportTypeOptions(TransportInfo.TRANSPORT_BIS_B, biso);
  Context subscribeContext = new Context("SUBSCRIBE_NON_BLOCKING", cf );
  try {
        subscribeDestination = (NonBlockingSenderDestination)DestinationFactory
          .getSenderDestination(
              subscribeContext.getName(),
              getPushInitiatorSubscribeURI());
        if (subscribeDestination == null) {
           MessageListener subscriptionListener = new SubscriptionResponseListener("Subscription");
              subscribeDestination = DestinationFactory
                  .createNonBlockingSenderDestination(
                      subscribeContext,
                      getPushInitiatorSubscribeURI(),
                      subscriptionListener
                  );
        ConnectionDescriptor connectionDescriptor =   subscribeContext.getConnectionFactory().getConnection(getPushInitiatorSubscribeURL());
        HttpMessage httpMessage = (HttpMessage) subscribeDestination.createByteMessage();
        httpMessage.setMethod(HttpMessage.POST);
        subscribeDestination.send((Message)httpMessage);
  

  and here's the code API network OS5 (Simplified):

  DataBuffer buffer = new DataBuffer( 256, false );
  InputStream is = null;
  Connection conn = null;
  try {
      ConnectionFactory cf = new ConnectionFactory();
      cf.setPreferredTransportTypes(new int[]{
          TransportInfo.TRANSPORT_TCP_WIFI,
          TransportInfo.TRANSPORT_MDS,
          TransportInfo.TRANSPORT_BIS_B,
          TransportInfo.TRANSPORT_TCP_CELLULAR,
          TransportInfo.TRANSPORT_WAP2});
      BisBOptions biso = new BisBOptions(seekretConnectionType);
      cf.setTransportTypeOptions(TransportInfo.TRANSPORT_BIS_B, biso);
      ConnectionDescriptor connectionDescriptor = cf.getConnection(getPushInitiatorSubscribeURL());
      conn = (HttpConnection) connectionDescriptor.getConnection();
      if( conn instanceof HttpConnection ) {
           HttpConnection httpConn = (HttpConnection) conn;
           ((HttpConnection) conn).setRequestMethod(HttpConnection.POST);
           OutputStream os = httpConn.openOutputStream();
           os.write(("user="+user+";pw="+password).getBytes());
           os.flush();
           int responseCode = httpConn.getResponseCode();
           is = httpConn.openInputStream();
           int length = is.read( buffer.getArray() );
           buffer.setLength( length );
           String response = new String( buffer.getArray(), buffer.getArrayStart(), buffer.getArrayLength() );
           if( responseCode == 200 ) {
                return true;
           }
      }
  

  is similar using always the same values and the server gets the correct data even from BISB using the Communication APIs - just the answer for this type of transport passing becomes bad.

  any ideas?

  or should I proceed to report a problem as a Bug?

  There is really a bug: If you use BISB with HTTP and OS 6 Communication API, then:

  It works for BISB-over-WIFI

  but it fails to BISB-over-carrier

  bug in > 6.0

  The GOOD NEWS: there is a solution:

  Just add a "User-Agent" TransportHeader with any value to your HTTP request Message, but the value does NOT start with the word "BlackBerry".

  then it works always - is not serious if the transport is in WIFI or carrier

  RIM thx for help

• HP deskjet all-in-one 2545: Troubleshooting Wireless direct with HP2545 with printer all in one

  I want to use my printer wirelessly without router (via direct wireless), but there is no work, or he always says this printer is offline every time when I was trying to make my the HP2545 while one use by direct wireless.  IAM using a pc with windows 7 64 bit I have installed the latest software for 2545 all-in-one of the net to the PC already, connected via USB and in this case printed successfully. (it also works through classic wireless)   The printer appears as a device with wireless on the PC and I can log in, however, (with unplugged USB) when Iam printing, the printer shows as offline and work never reached the printer. But if I plug in the USB cable it will print. I already found in the bottom right corner my SSID of my printer, put the correct password and it writes me that priter is already connected but nevertheless the printer does not work, is always offline... I tried all the known methods (in classic seting place... by start-> all programs-> HP-> HP deskjet 2545 series-> setting up the printer and the software and tried to convert the USB to connect wireless) , but without any positive result... what iam doing wrong? why it does not work on my pc via direct wireless table? on my second laptop it I have win 7 32 bit and everything works great also through the direct wireless... it's very strange... Why this function works on my laptop but on my table pc not despite the fact that connected the printer in the lower right corner...

  Although no one responded to my problem, thank you when, I already solve the problem! It was such a success s bull and I didn't know... I had only just connected and linked to my home PC, my network card with my wireless card with the network address and ola which was the cause which has blocked my direct function wireless printer, now everything works well,!

• How to find a client software to connect Palm Centro directly with Exchange Server?

  
  

  Thanks for the reply.  I've read some things rather unkind on VersaMail features when used in conjunction with Outlook from other access to the same server as I do and also on ActiveSync, but who am I to judge the accuracy of these comments.  I do not have the CD at hand, but I prefer by far using Mac for office.  I'm scared, I'm back to the BlackBerry and its shabby calendar with the zone problem for those of us traveling.  Once again, thank you for the reply.

  Message relates to: Centro (Verizon)