BlackBerry JDE fails to start after the installation of Simulator Tour 9630

I use JDE 4.7.0 on Win XP + a bunch of simulators.

After the Tour 9630 Simulator (v 4.7.1.40), I installed the JDE does not start.

I tried to run ide.bat via command line - it does not give error messages.

I tried to reinstall my JDE (with deletion of the dir of installation in order to remove settings from JDE is) - it did not help.

I am now able to run the JDE again after that I uninstalled the Tour 9630 Simulator. But I really need this Simulator because I develop an application for the round.

What could be the problem?

Thanks to Marc post here the solution I managed to solve this problem.

The solution is:

  1. install the Simulator
  2. Make a copy of its installation directory
  3. uninstall the Simulator
  4. manually create a new Simulator in JDE by using the copy of the directory

Tags: BlackBerry Developers

Similar Questions

  • Equium L350 - Vista fails to start after the installation of recovery

    Hello world

    I have an Equium L350 after an accident I couldn't restart my pc. I tried to solve by using the recovery f8 menu and it did not work so I contacted Toshiba and got a restore disc. I reinstalled from the disc, after the instalation it said complete installation but visa does not start.
    I get: Windows cannot repair this computer automatically click finished to turn off your pc

    After a format and reinstall my computer broken? He is 13 months here for out of warranty

    Hello

    Normally after the installation of recovery your laptop should work fine again.

    In my opinion, it could be a malfunction of the equipment. Did you test the HARD drive for bad sectors? You can do this with Drive Fitness Test: http://www.hitachigst.com/hdd/support/download.htm#DFT
    Download the ISO image and burn it to a disk. Then you can boot from it and test your HARD drive for errors.

    I also recommend to check the RAM for errors: http://memtest86.com/
    Memtest is a good diagnostic tool for the RAM.

    I hope I could help a bit. :)

  • New HP HARD drive > load recovery disks > fails to start after the installation process on the press continue

    I have Pavilion d7-4165dx laptop. I saw US, that made a purchase of the United States (BestBuy).

    -HARD drive failed after renewal of antivirus software trial period.

    -All diagnoses would not recognize the HARD drive.

    -Support HP said still in warranty, but I am out of country.  HP said more was likely HARD drive cable.

    -Buy cables and a hand off USA door.

    -Installed, always the same answer.

    -Ordered the new HP's HARD drive.  Out of stock.  Finally inquiring was commissioned to a part 3rd US rep.  He recommended to buy directly from output, but higher speed.  Did this and then HP replacement HARD drive arrives.  Both outside the U.S. door hand.

    -Install the fastest (slightly smaller) Seagate 500G 7200.  Has started the recovery with discs of recovery (5 in total who received from BestBuy, but not the OEM to the research), but before the new HARD drive is smaller than the original WD 640 G 5400.   Put WD #1 Bay and Seagate in #2.

    -Start the process of disk recovery.  Any resumption of the process of the plant and on the last drive-through, it says do not touch while the PC starts on and outside, etc.  Said so press on continue continue.

    -When the press continue, simply goes to the black screen with "No boot device...". »

    -Run the other options, the same message.

    -Diagnosis of ran.  Drive HARD everything is OK.

    -Called HP support.  It says I have to buy the HP recovery discs.  Those I have (5) is not the right one, there should be only 3!  They are that I got from BestBuy, but look like they were made here when BestBuy configures the PC.

    Suggestions anyone?

    Someone has found the problem for me today...

    "Put WD #1 Bay and Seagate in #2.

    When the directions say eliminates any external devices... it really means remove all devices that can be removed that were added after you bought the computer... including in-house!

  • ESX fails to start after the installation with cpu5:1041) Mod: 1413: failed to initialize of vmfs2-1

    Hello

    I just installed a new ESX Server last night, configured and moved 6 VMs to him. I rebooted the machine, because I changed the VMconsole memory up to 500 and machine does not boot properly.

    The server is a Dell PowerEdge 6650 with 8 GB of RAM and 4 CPUs with a PERC3 RAID controller and 4 hard drives.

    VMware ESX 3.5 Update 3 build 123630

    Error 0:00:01:08.959 cpu5:1041) Mod: 1413: failed to initialize of vmfs2 with-1.

    Anyone had this problem with an ESX installation before?

    Kind regards

    Dean Forester

    Hello

    There may be a problem with the networking, can you start the server in debug mode and see if you can see an IP address for your service console. If you can see the ip address, you have a network card, you place your order to change, try to use the right physical NIC card mapped to the vSwtich0 who was there at the beginning when the machine was working.

    Thank you

    Samir

    PS: If you think the answer is useful please consider rewarding points.

  • I have a compaq presario cq60 with vista which was able to start after the installation of windows updates. HP recovery failed with error code 100a and bios self-test gave error fail #1-07. What can I do?

    I have a compaq presario cq60 with vista. Could not start after the installation of windows updates. HP recovery failed with error code 100a and bios self-test gave error fail #1-07. I took the hard drive and installed in my office. Windows Explorer displays the main and recovery partitions.

    The primary partition has the following folders (including hidden & system)

    The recovery partition has the following (including the language files more)

    Someone at - it ideas why my laptop does not work?

    Thank you

    Greg

    Hello

    You press F11 on startup with a HP Compaq to start the recovery process.

    For problems with the recovery process, you will need to contact HP.

    BIOS problems:

    There are messages for the HP Forums for posters with similar errors:

    http://h30499.www3.HP.com/T5/notebook-HP-ProBook-EliteBook/notebook-HDD-problems-TEst-status-1-07-fail/TD-p/658902

    http://h30499.www3.HP.com/T5/notebook-PCs-pavilions-Presario/HP-Pavilion-dv8000-getting-1-07-fail-error/TD-p/883284

    http://h30499.www3.HP.com/T5/notebook-PCs-pavilions-Presario/HP-Pavilion-notebook-dv6000-1-07-fail/TD-p/1069457

    All the answers it point to a drive about to fail

    See you soon.

  • XP does not start after the installation of avira. Blue screen: STOP: 0 x 00000024 (0 x 00190203, 0 x 87174270, 0xc0000102, 0x00000000)

    Original title: xp does not start after the installation of avira

    I have a HP Slimline s7410
    XP Home Edition SP3
    I had Norton free with Comcast, but since I have no more Comcast became Norton expired. So I uninstalled Norton and installed the free version of Avira, he scanned the computer and it was clean. I went to reboot and now it does not start.
    I have a cd/dvd drive of work.
    I don't have an XP bootable installation CD

    My system worked well until: I installed the free version of Avira

    Whenever I select one on the XP advanced options options menu start, it goes into a boot loop.
    I turn off the auto reboot system failure although it seems only work once, as the next time he's trying to start up it goes into the boot loop.

    Here's what my BSOD looks like:

    Disable or uninstall any anti-virus, disk defragmentation or backup utilities. Check the configuration of your hard drive and check the updated drivers. Run CHKDSK /F to check for hard drive corruption, and then restart your computer.

    Technical information:
    STOP: 0 X 00000024 (0 X 00190203, 0 X 87174270, 0XC0000102, 0X00000000)

    Any help is greatly appreciated! :)

    My first suggestion is to do a system restore at this time point.

    second suggestion is to keep your external drive connected to the pc at all times.  only detach when necessary.   of course, it would be better to install a second hard drive in the computer instead.   in any case, keep your personal files out of the system disk is a wise thing to do.   You can also download and store files for free on the Microsoft Skydrive site.

    third suggestion is to keep your system set upward through executing a check disk and Defrag at least once a month.   Basically, you can open the Explorer and right-click on the drive letter.  then select Properties, and on the Tools tab, you will have the opportunity to run the disk check.  then reboot and do a Defrag.   where this disk check fails, then you will need to run it to the drive via a bootable cd prompt.

    Interestingly, I don't know if the bootable cd that you made you allows to run the disk check.

    so my suggestion is to do a series of tests using your cd bootable your computer works.  see if you can actually run a chkdsk/r at the moment with them.    If Yes, then if your constant worries are having bad sectors on the hard disk, chkdsk/r will identify and mark so windows will jump on them.    in any case, see if your boot at the moment media can run a check disk at all, and let me know.

    fifth proposal is to install "microsoft security essentials" like your anti virus program.  even if you have run ubantu, it is not likely to have been an infected copy.   anti - are most critical virus for windows and not not so much for ubantu or linux is because windows is a system of world class operations.    the people who make the virus deliberately their engineer for the windows operating system.   If, however, ubantu and linux have been just as popular as Windows, virus engineers would make infections for the o.s. too.     Although they no doubt, attacks are more frequent for the windows os.

  • ITunes does not start after the installation of Windows 10

    ITunes does not start after the installation of Windows 10, 1511 version (OS Build 10586.164). ITunes version 12.3.2.35, 6 GB RAM, Intel i3 @3.3 GHz. Itunes and Ipodserver module will run by Manager jobs, but Itunes does not open. iTunes starts in SafeMode as explained in the link below (hold SHIFT and control on your keyboard while you open iTunes).

    Fix unexpectedly closes or problems of launch in iTunes for Windows - Apple Support

    Solution, according to this link, is:

    If the problem does not occur in Mode safe, remove any third party plug-ins iTunes: solving problems with third party plug-ins - Support Apple iTunes but the link has been archived, and I can't find any plug-ins installed iTunes. Any other ideas?

    For general advice, see troubleshooting problems with iTunes for Windows updates.

    The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

    Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

    More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

    Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

    TT2

  • Z600: computer does not start after the installation of the 5 TB SATA drive

    My z600 refurbished does not start after the installation of a SATA of Toshiba 5 to disk.  After removing the drive, the computer starts.  I have my computer too old to handle a 5 TB drive, I something wrong or is the DOA drive?

    Thanks for the info.  I added the GPT to my search and discovered what had to be done in disk management.  Here is a page with step by step instructions and photos.  http://www.howtogeek.com/193669/whats-the-difference-between-GPT-and-MBR-when-partitioning-a-drive/

  • computer does not start after the installation of vista updates.

    computer does not start after the installation of vista updates. Startup Repair is also not working. event name: Startup Repair v2, prob GIS. 1: automatic failover, prob GIS 2: 6.0.6000.16386.6.0.6001.1800, prob 3:6, prob prob 5 and 6 GIS GIS sig, 4:720907: corrupt file, prob GIS 7: 3221226021, 8:3, prob GIS GIS prob 9: repair wrp, prob GIS 10; 2, 0 s version: 6.0.6000.2.0.0.256.1. In addition, none of these advanced recovery options seem to work.

    Hello

    Try the steps suggested by David Y post dated November 2, 2010 in the link given below and check if that helps.

    http://social.answers.Microsoft.com/forums/en-us/w7repair/thread/a6071159-db22-4076-b5d8-31f446dbdf32

    Hope that information was useful

  • Problem starting after the installation of the NTI Echo Satellite P50-B-11V

    Hi guys. I have problems to start mid laptop computer (Toshiba Satellite P50-B-11V, F04236S) after the installation of NTI Echo3 to migrate the data from the drive HARD original to a new SSD (Toshiba 480 GB Q300 series).

    Error: file/echo not found boot/initrd.gz. Pilot pata-platform...
    Kernel panic not syncing VFS: Don't mount rootfson unknown - black (0,0).

    Anyone facing this problem? Please advice if you have the time.
    I tried several times to repair Windows (F12 key) and I have tried different ways to migrate data but the problem even after reboot.

    Thanks fo your time.

    Posted by marianbur
    Hi guys. I have problems to start mid laptop computer (Toshiba Satellite P50-B-11V, F04236S) after the installation of NTI Echo3 to migrate the data from the drive HARD original to a new SSD (Toshiba 480 GB Q300 series).

    Error: file/echo not found boot/initrd.gz. Pilot pata-platform...
    Kernel panic not syncing VFS: Don't mount rootfson unknown - black (0,0).

    Anyone facing this problem? Please advice if you have the time.
    I tried several times to repair Windows (F12 key) and I have tried different ways to migrate data but the problem even after reboot.

    Thanks fo your time.

    Dear marianbur,

    New laptop having same problem here, is now stuck... Have you received still no solution?

    Greetz

  • Patches of Toshiba Service Station closes after starting after the installation of 3

    Hello

    We recently have a "patch day" Toshiba Service station. I think from my memory that the patches are released earlier, but I installed them on April 23, 2010. There are three patches, and so that I can restore from the system recovery, it was:

    -Flashing of BIOS
    -Patch HDD/SSD Alert
    -HDD Recovery patch.

    So, not to mention that I had problems to make the flashing patch BIOS to run, finally extracting installation files to another location and run it with administrator rights.

    My problem is that after this session of patch, my Toshiba Service Station no longer starts. When I start my system, after recording on it seems to start upward but always farm then again with windows say error report 'stopped working' and that's it. I'm not sure patch who this could be. I also believe that one of these Islands said in the description that it will update station itself? I downloaded Service Station on the Toshiba site but it will not prove at best, does not matter if I uninstall it, before you start the installation with administrator rights or not.

    My system is Satellite A500, Windows 7 64 bit.

    I hope you can help. Unless I can't access the updates anymore!

    Note: A few days before I installed a graphic driver for my Nvidia GT 230 m SINCE THE SITE WEB of NVIDIA. Why am I? I've lived literally all HOURS a unwanted system reboot and I see in the problem report it was always because of the graphic driver. Subsequently, I installed the two patches from the site of Toshiba, the elders and the most recent, but the problem persisted. Fortunately, a few days I have recheched the Nvidia site and there was a new driver.

    Although he said BEFORE (not now anymore) that this graphics card should be based on a driver manufacturer, I installed it but because he Coulnd't ' t get worse. The positive thing is that I didn't have a single far system crash even if I leave the phone turned on for hours.

    I'm not sure if the problem with the gas station started right after the installation of the graphics driver, but it can't be because I installed the three patches mentioned above, through gas station, a few days later.

    But he seemed to have affected the software after these patches? I'm not sure.

    Hello

    Simply said; Toshiba Service Station breaks down and new installation of this tool didn't help.
    Right?

    Well, because you are not sure what s wrong and depending on the assignment, you have other problems with the software, I recommend to recover the laptop using the recovery of HARD drive option!
    This will outline the laptop to factory settings.

    Of course, you must back up the data if you have important files.

    Run recovery disc HARD and after that check how the laptop would serve!

  • Windows 7 does not start after the installation of updates - sounds familiar!

    Apparently, I have another system that no longer starts after you install an update to Windows 7. New kick computer _ I have to disable the automatic update of windows. Twice I had to restore the system in the first week because he hung up after the installation of updates for windows 7. I have no idea what update is the cause of the problem.

    Essentially, start the screen goes black with the cursor blinking in the upper left corner of the screen. The only way out is to restore the system.

    Does anyone know what update is the culpret? HP support has no idea. Their only solution was to update windows 7 to 'never download an update from windows '. It is a terrible thing to be underestimated solution.

    Here's the resolution...

    I installed all the updates except KB2284742 954430, 973688 and 971033. So I decided to install these 1 4 at a time in the order shown. I installed successfully 228472 and 954430 and 973688 disappeared from the list of available updates. So I installed 971033 and it installed successfully and I was still able to restart.

    My conclusion is that there is a conflict between the first 3 updates when they are installed at the same time.

    Now my system is up to date with all windows updates and I'm able to restart without any problems!

    Close this message.

  • Server does not start after the installation of the USB bootable, ESXi

    Hello

    I installed VMware ESXi 5 on a SSD drive using a bootable USB key, but my server does not automatically start since the SSD after installation. I can boot ESXi in the offered by the BIOS boot menu.

    The startup configuration is perhaps incorrect because during the installation of the USB drive is present, but after the installation, it is not?

    Also has anyone seen this problem?

    Kind regards

    Gijsbert

    Updating the BIOS on the DQ77MK at 49, and you should be able to start - UEFI must never be activated.

  • can not start after the installation of 10 Windows via bootcamp OSX

    Hello, I need help.

    I tried to install 10 Windows via bootcamp, and I did it successfully with no problems. However, after the installation, I restarted my computer, hold down the option key and tried to boot into OS X, but it won't work. It would be a symbol that boot lead me to windows 10!

    all solutions? I do not have a backup of my files under OSX, I lose my files?

    NOTE: when I formatted the partition for windows, he said not bootcamp next to him, but it is clear that the partition that I had to format, it is the same size that I decided to make Windows when I was in bootcamp in OSX + it was empty at 100%.

    UPDATE 1: so I managed to get into the recovery of the internet and deleted the partition that had the windows and install OSX Marverix instead (temporarily) also, I fixed the hard drive MACINTOSH HD, but now I can't boot it at all when I press the option button during the priming of the mac. all solutions?

  • Computer will not start after the installation of Kaspersky, will not even go into safe mode

    I tried to install Kaspersky on my laptop this morning to roll some viruses on my computer. After you restart during the installation, I got the blue screen of death with a STOP 0x000000F4 error code. I can't use my phone at all now, and it will not work in SafeMode either. I tried to restore the computer to before that Kaspersky was installed but it cannot do so. I tried to restore to the last known good configuration, but that did not work. I have no idea what to do now. My laptop is basically useless now and I am very angry.

    If I have the Kaspersky disk in I kind of access Kaspersky, and it keeps telling me it is obsolete and must be updated, but it will not be updated. Also, it tries to mount the drives or something and gets stuck trying to create the swap file. I don't know if it's important, but I'll post it anyway.
    I'm at a loss to know what to do...

    If you have tried to install an AV program after your PC has been infected you left it too late.

    Your safest option is to use your recovery discs to get destructive if you plant (make sure that the external devices are disconnected during this process)

    I hope that you, the data has been saved you will lose everything on the PC

    Once recovered allow windows update to do its thing for Important updates ONLY. It may take several reboots.

    If any update fails cure this problem before doing anything else.

    Once the update finished visit of manufacturers of laptop for important driver updates to update necessary.

    Only after this has been done, you should start installing software or external devices.

    If an installation fails, solve this problem before

Maybe you are looking for